diff options
Diffstat (limited to 'tests/vpp/device/ip4/eth2p-ethip4-ip4base-dev.robot')
| -rw-r--r-- | tests/vpp/device/ip4/eth2p-ethip4-ip4base-dev.robot | 119 |
1 files changed, 47 insertions, 72 deletions
diff --git a/tests/vpp/device/ip4/eth2p-ethip4-ip4base-dev.robot b/tests/vpp/device/ip4/eth2p-ethip4-ip4base-dev.robot index 23a5b76afa..f9b6ebf314 100644 --- a/tests/vpp/device/ip4/eth2p-ethip4-ip4base-dev.robot +++ b/tests/vpp/device/ip4/eth2p-ethip4-ip4base-dev.robot @@ -13,14 +13,11 @@ *** Settings *** | Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/traffic.robot | ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV -| ... | FUNCTEST | IP4FWD | BASE | ETH | IP4BASE +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Virtual | ETH | IP4FWD | BASE | IP4BASE | ... -| Suite Setup | Setup suite single link +| Suite Setup | Setup suite single link | scapy | Test Setup | Setup test | Test Teardown | Tear down test | packet_trace | ... @@ -40,98 +37,76 @@ *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | ${nic_name}= | virtual -| ${tg_to_dut_if1_ip4}= | 10.10.10.2 -| ${tg_to_dut_if2_ip4}= | 20.20.20.2 -| ${dut_to_tg_if1_ip4}= | 10.10.10.1 -| ${dut_to_tg_if2_ip4}= | 20.20.20.1 -| ${remote_host1_ip4}= | 192.168.0.1 -| ${remote_host2_ip4}= | 192.168.0.2 -| ${remote_host_ip4_prefix}= | 32 +| ${overhead}= | ${0} *** Test Cases *** -| tc01-eth2p-ethicmpv4-ip4base-device_echo-req-to-dut-ingress-interface +| tc01-eth2p-ethicmpv4-ip4base-dev_echo-req-to-dut-ingress-interface | | [Documentation] -| | ... | Make TG send ICMPv4 Echo Req to DUT1 ingress interface. Make TG \ -| | ... | verify ICMP Echo Reply is correct. +| | ... | [Ver] Make TG send ICMPv4 Echo Req to DUT1 ingress interface.\ +| | ... | Make TG verify ICMP Echo Reply is correct. | | ... -| | ${hops}= | Set Variable | ${0} +| | Set Test Variable | ${frame_size} | ${42} +| | Set Test Variable | ${rxq_count_int} | ${1} | | ... | | Given Add PCI devices to all DUTs +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | And VPP Enable Traces On All Duts | ${nodes} -| | When Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Configure IPv4 forwarding in circular topology | ${tg_to_dut_if1_ip4} -| | ... | ${tg_to_dut_if2_ip4} | ${dut_to_tg_if1_ip4} | ${dut_to_tg_if2_ip4} -| | When All Vpp Interfaces Ready Wait | ${nodes} -| | Then Send IPv4 ping packet and verify headers | ${tg_node} -| | ... | ${tg_to_dut_if1} | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${tg_to_dut_if1_ip4} | ${dut_to_tg_if1_ip4} | ${dut_to_tg_if1_mac} -| | ... | ${hops} -| | Get interface Ipv4 addresses | ${nodes['DUT1']} | ${dut_to_tg_if1} +| | When Initialize IPv4 forwarding in circular topology +| | Then Send IPv4 ping packet and verify headers +| | ... | ${tg} | ${tg_if1} | ${dut1} | ${dut1_if1} +| | ... | 10.10.10.2 | 10.10.10.1 | ${dut1_if1_mac} | ${0} -| tc02-eth2p-ethicmpv4-ip4base-device_echo-req-to-dut-egress-interface +| tc02-eth2p-ethicmpv4-ip4base-dev_echo-req-to-dut-egress-interface | | [Documentation] -| | ... | Make TG send ICMPv4 Echo Req towards DUT1 egress interface. Make TG \ -| | ... | verify ICMP Echo Reply is correct. +| | ... | [Ver] Make TG send ICMPv4 Echo Req towards DUT1 egress interface.\ +| | ... | Make TG verify ICMP Echo Reply is correct. | | ... -| | ${hops}= | Set Variable | ${0} +| | Set Test Variable | ${frame_size} | ${42} +| | Set Test Variable | ${rxq_count_int} | ${1} | | ... | | Given Add PCI devices to all DUTs +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | And VPP Enable Traces On All Duts | ${nodes} -| | When Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Configure IPv4 forwarding in circular topology | ${tg_to_dut_if1_ip4} -| | ... | ${tg_to_dut_if2_ip4} | ${dut_to_tg_if1_ip4} | ${dut_to_tg_if2_ip4} -| | When All Vpp Interfaces Ready Wait | ${nodes} -| | Then Send IPv4 ping packet and verify headers | ${tg_node} -| | ... | ${tg_to_dut_if1} | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${tg_to_dut_if1_ip4} | ${dut_to_tg_if2_ip4} | ${dut_to_tg_if1_mac} -| | ... | ${hops} +| | When Initialize IPv4 forwarding in circular topology +| | Then Send IPv4 ping packet and verify headers +| | ... | ${tg} | ${tg_if1} | ${dut1} | ${dut1_if2} +| | ... | 10.10.10.2 | 20.20.20.1 | ${dut1_if1_mac} | ${0} -| tc03-eth2p-ethicmpv4-ip4base-device_echo-req-to-tg-interface-for-local-ipv4-address +| tc03-eth2p-ethicmpv4-ip4base-dev_echo-req-to-tg-interface-for-local-ipv4-address | | [Documentation] -| | ... | Make TG send ICMPv4 Echo Req between its interfaces across DUT1 for \ -| | ... | locally connected IPv4 addresses. Make TG verify ICMPv4 Echo Replies \ -| | ... | are correct. +| | ... | [Ver] Make TG send ICMPv4 Echo Req between its interfaces across DUT1\ +| | ... | for locally connected IPv4 addresses. Make TG verify ICMPv4 Echo\ +| | ... | Replies are correct. | | ... -| | ${hops}= | Set Variable | ${1} +| | Set Test Variable | ${frame_size} | ${42} +| | Set Test Variable | ${rxq_count_int} | ${1} | | ... | | Given Add PCI devices to all DUTs +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | And VPP Enable Traces On All Duts | ${nodes} -| | When Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Configure IPv4 forwarding in circular topology | ${tg_to_dut_if1_ip4} -| | ... | ${tg_to_dut_if2_ip4} | ${dut_to_tg_if1_ip4} | ${dut_to_tg_if2_ip4} -| | When All Vpp Interfaces Ready Wait | ${nodes} -| | Then Send IPv4 ping packet and verify headers | ${tg_node} -| | ... | ${tg_to_dut_if1} | ${tg_node} | ${tg_to_dut_if2} -| | ... | ${tg_to_dut_if1_ip4} | ${tg_to_dut_if2_ip4} | ${dut_to_tg_if1_mac} -| | ... | ${hops} +| | When Initialize IPv4 forwarding in circular topology +| | Then Send IPv4 ping packet and verify headers +| | ... | ${tg} | ${tg_if1} | ${tg} | ${tg_if2} +| | ... | 10.10.10.2 | 20.20.20.2 | ${dut1_if1_mac} | ${1} -| tc04-eth2p-ethicmpv4-ip4base-device_echo-req-to-tg-interface-for-remote-host-ipv4-address +| tc04-eth2p-ethicmpv4-ip4base-dev_echo-req-to-tg-interface-for-remote-host-ipv4-address | | [Documentation] -| | ... | Make TG send ICMPv4 Echo Req between its interfaces across DUT1 for \ -| | ... | remote host IPv4 addresses. Make TG verify ICMPv4 Echo Replies are \ -| | ... | correct. +| | ... | [Ver] Make TG send ICMPv4 Echo Req between its interfaces across DUT1\ +| | ... | for remote host IPv4 addresses. Make TG verify ICMPv4 Echo Replies\ +| | ... | are correct. | | ... -| | ${hops}= | Set Variable | ${1} +| | Set Test Variable | ${frame_size} | ${42} +| | Set Test Variable | ${rxq_count_int} | ${1} | | ... | | Given Add PCI devices to all DUTs +| | And Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | And VPP Enable Traces On All Duts | ${nodes} -| | When Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Configure IPv4 forwarding in circular topology | ${tg_to_dut_if1_ip4} -| | ... | ${tg_to_dut_if2_ip4} | ${dut_to_tg_if1_ip4} | ${dut_to_tg_if2_ip4} -| | ... | remote_host1_ip4=${remote_host1_ip4} -| | ... | remote_host2_ip4=${remote_host2_ip4} -| | ... | remote_host_ip4_prefix=${remote_host_ip4_prefix} -| | And VPP Get IP tables | ${dut_node} -| | When All Vpp Interfaces Ready Wait | ${nodes} -| | Then Send IPv4 ping packet and verify headers | ${tg_node} -| | ... | ${tg_to_dut_if1} | ${tg_node} | ${tg_to_dut_if2} -| | ... | ${remote_host1_ip4} | ${remote_host2_ip4} | ${dut_to_tg_if1_mac} -| | ... | ${hops} +| | When Initialize IPv4 forwarding in circular topology +| | ... | remote_host1_ip=192.168.0.1 | remote_host2_ip=192.168.0.2 +| | Then Send IPv4 ping packet and verify headers +| | ... | ${tg} | ${tg_if1} | ${tg} | ${tg_if2} +| | ... | 192.168.0.1 | 192.168.0.2 | ${dut1_if1_mac} | ${1} |