diff options
Diffstat (limited to 'tests/vpp/device/ip6')
4 files changed, 302 insertions, 0 deletions
diff --git a/tests/vpp/device/ip6/eth2p-ethip6-ip6base-copblklistbase-dev.robot b/tests/vpp/device/ip6/eth2p-ethip6-ip6base-copblklistbase-dev.robot new file mode 100644 index 0000000000..015a97c5d9 --- /dev/null +++ b/tests/vpp/device/ip6/eth2p-ethip6-ip6base-copblklistbase-dev.robot @@ -0,0 +1,74 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Virtual | ETH | IP6FWD | FEATURE | COPBLKLIST +| ... +| Suite Setup | Setup suite single link | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace +| ... +| Test Template | Local Template +| ... +| Documentation | *COP Security IPv6 whitelist test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 on all links. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and \ +| ... | static routes. COP security white-lists are applied on DUT1 ingress \ +| ... | interface from TG. +| ... | *[Ver] TG verification:* Test IPv6 packets are sent in one direction \ +| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \ +| ... | and drops as applicable. +| ... | *[Ref] Applicable standard specifications:* + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual +| ${overhead}= | ${0} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Ver] Make TG send IPv6 on its interface to DUT1; \ +| | ... | verify received IPv6 pkts are correct. +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | And Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize IPv6 forwarding in circular topology +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | Then Packet transmission from port to port should fail +| | ... | ${tg} | 2002:1::2 | 2002:2::2 +| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac} +| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac} + +*** Test Cases *** +| tc01-78B-ethip6-ip6base-copblklistbase-dev +| | [Tags] | 78B +| | frame_size=${78} | phy_cores=${0} diff --git a/tests/vpp/device/ip6/eth2p-ethip6-ip6base-copwhtlistbase-dev.robot b/tests/vpp/device/ip6/eth2p-ethip6-ip6base-copwhtlistbase-dev.robot new file mode 100644 index 0000000000..abf8b45611 --- /dev/null +++ b/tests/vpp/device/ip6/eth2p-ethip6-ip6base-copwhtlistbase-dev.robot @@ -0,0 +1,74 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Virtual | ETH | IP6FWD | FEATURE | COPWHLIST +| ... +| Suite Setup | Setup suite single link | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace +| ... +| Test Template | Local Template +| ... +| Documentation | *COP Security IPv6 whitelist test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 on all links. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and \ +| ... | static routes. COP security white-lists are applied on DUT1 ingress \ +| ... | interface from TG. +| ... | *[Ver] TG verification:* Test IPv6 packets are sent in one direction \ +| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \ +| ... | and drops as applicable. +| ... | *[Ref] Applicable standard specifications:* + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual +| ${overhead}= | ${0} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Ver] Make TG send IPv6 on its interface to DUT1; \ +| | ... | verify received IPv6 pkts are correct. +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | And Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize IPv6 forwarding in circular topology +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | Then Send packet and verify headers +| | ... | ${tg} | 2001:1::2 | 2001:2::2 +| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac} +| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac} + +*** Test Cases *** +| tc01-78B-ethip6-ip6base-copwhtlistbase-dev +| | [Tags] | 78B +| | frame_size=${78} | phy_cores=${0} diff --git a/tests/vpp/device/ip6/eth2p-ethip6-ip6base-iacldstbase-dev.robot b/tests/vpp/device/ip6/eth2p-ethip6-ip6base-iacldstbase-dev.robot new file mode 100644 index 0000000000..50ae50676f --- /dev/null +++ b/tests/vpp/device/ip6/eth2p-ethip6-ip6base-iacldstbase-dev.robot @@ -0,0 +1,79 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Virtual | ETH | IP6FWD | FEATURE | IACLDST +| ... +| Suite Setup | Setup suite single link | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace +| ... +| Test Template | Local Template +| ... +| Documentation | *IPv6 iAcl whitelist test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 on all links. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and \ +| ... | static routes. IPv6 iAcl security whitelist is applied on DUT1 ingress \ +| ... | interface from TG. +| ... | *[Ver] TG verification:* Test IPv6 packets are sent in one direction \ +| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \ +| ... | and drops as applicable. +| ... | *[Ref] Applicable standard specifications:* + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual +| ${overhead}= | ${0} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Ver] Make TG send IPv6 on its interface to DUT1; \ +| | ... | verify received IPv6 pkts are correct. +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | And Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize IPv6 forwarding in circular topology +| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 +| | ... | ${dut1} | ip6 | dst | 2001:2::2 +| | And Vpp Configures Classify Session L3 +| | ... | ${dut1} | permit | ${table_idx} | ip6 | dst | 2001:2::2 +| | And Vpp Enable Input Acl Interface +| | ... | ${dut1} | ${dut1_if1} | ip6 | ${table_idx} +| | Then Send packet and verify headers +| | ... | ${tg} | 2001:1::2 | 2001:2::2 +| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac} +| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac} + +*** Test Cases *** +| tc01-78B-ethip6-ip6base-iacldstbase-dev +| | [Tags] | 78B +| | frame_size=${78} | phy_cores=${0} diff --git a/tests/vpp/device/ip6/eth2p-ethip6-ip6base-ipolicemarkbase-dev.robot b/tests/vpp/device/ip6/eth2p-ethip6-ip6base-ipolicemarkbase-dev.robot new file mode 100644 index 0000000000..e0ea687581 --- /dev/null +++ b/tests/vpp/device/ip6/eth2p-ethip6-ip6base-ipolicemarkbase-dev.robot @@ -0,0 +1,75 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Virtual | ETH | IP6FWD | FEATURE | POLICE_MARK +| ... +| Suite Setup | Setup suite single link | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace +| ... +| Test Template | Local Template +| ... +| Documentation | *IPv4 policer test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 on all links. +| ... | *[Cfg] DUT configuration:* On DUT1 configure interfaces IPv6 adresses, \ +| ... | and static ARP record on the second interface. On DUT1 configure 2R3C \ +| ... | color-aware policer on the first interface. +| ... | *[Ver] TG verification:* Test packet is sent from TG on the first link \ +| ... | to DUT1. Packet is received on TG on the second link from DUT1. +| ... | *[Ref] Applicable standard specifications:* RFC2474, RFC2697, RFC2698. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual +| ${overhead}= | ${0} +| ${cir}= | ${100} +| ${eir}= | ${150} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Ver] Test packet is sent from TG on the first link to DUT1. \ +| | ... | Packet is received on TG on the second link from DUT1. +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | Set Test Variable | \${cb} | ${frame_size} +| | Set Test Variable | \${eb} | ${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | And Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize IPv6 forwarding in circular topology +| | And Initialize IPv6 policer 2r3c-'ca' in circular topology +| | Then Send packet and verify marking +| | ... | ${tg} | ${tg_if1} | ${tg_if2} | ${tg_if1_mac} | ${dut1_if1_mac} +| | ... | 2001:1::2 | 2001:2::2 + +*** Test Cases *** +| tc01-78B-ethip6-ip6base-ipolicemarkbase-dev +| | [Tags] | 78B +| | frame_size=${78} | phy_cores=${0} |