diff options
Diffstat (limited to 'tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-scapy.robot')
| -rw-r--r-- | tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-scapy.robot | 107 |
1 files changed, 107 insertions, 0 deletions
diff --git a/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-scapy.robot b/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-scapy.robot new file mode 100644 index 0000000000..1fa603e8fd --- /dev/null +++ b/tests/vpp/device/srv6/2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-scapy.robot @@ -0,0 +1,107 @@ +# Copyright (c) 2021 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | SRv6 | SRv6_2SID_DECAP +| ... | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip6srhip6-ip6base-srv6enc2sids +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace +| +| Test Template | Local Template +| +| Documentation | *Segment routing over IPv6 dataplane with two SIDs\ +| ... | (SRH inserted) test suite.* +| +| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ +| ... | between nodes. +| ... | *[Cfg] DUT configuration:* On DUT1 configure physical interface IPv6\ +| ... | addresses, static ARP record, route and IPv6 forwarding over SRv6\ +| ... | with two SIDs - Segment Routing Header inserted. +| ... | *[Ver] TG verification:* ETH-IP6 packet is sent from TG to DUT1 in one\ +| ... | direction. Packet is received and verified for correctness on TG. Then\ +| ... | ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is\ +| ... | received and verified for correctness on TG. +| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ +| ... | draft 3. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${80} +# SIDs +| ${dut1_sid1}= | 2002:1:: +| ${dut1_sid2_1}= | 2003:2:: +| ${dut1_sid2_2}= | 2003:3:: +| ${dut1_bsid}= | 2002:1::1 +| ${dut2_sid1_1}= | 2002:2:: +| ${dut2_sid1_2}= | 2002:3:: +| ${dut2_sid2}= | 2003:1:: +| ${sid_prefix}= | ${64} +# IP settings +| ${tg_if1_ip6_subnet}= | 2001:1:: +| ${tg_if2_ip6_subnet}= | 2001:2:: +| ${dst_addr_nr}= | ${1} +| ${dut1_if1_ip6}= | 2001:1::1 +| ${dut1_if2_ip6}= | 2001:3::1 +| ${dut2_if1_ip6}= | 2001:3::2 +| ${dut2_if2_ip6}= | 2001:2::1 +| ${prefix}= | ${64} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT1 is configured with IPv6 routing and static route,\ +| | ... | SR policy and steering policy for one direction and two SR\ +| | ... | behaviours (functions) - End and End.DX6 - for other direction. +| | ... | [Ver] Make TG send IPv6 packets routed over DUT1 interfaces.\ +| | ... | Make TG verify IPv6 packets are correct. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize SRv6 encapsulation with '2' x SID 'with' decapsulation +| | Then Send IPv6 Packet and verify SRv6 encapsulation in received packet +| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0] | ${DUT1_${int}1_mac}[0] +| | ... | ${DUT1_${int}2_mac}[0] | ${tg_if1_ip6_subnet}2 | ${tg_if2_ip6_subnet}2 +| | ... | ${dut1_sid1} | ${dut1_sid2_1} | ${dut2_sid2} | ${dut2_sid1_1} +| | ... | ${dut1_sid2_2} | ${dut2_sid1_2} + +*** Test Cases *** +| 78B-0c-ethip6srhip6-ip6base-srv6enc2sids-scapy +| | [Tags] | 78B | 0C +| | frame_size=${78} | phy_cores=${0} |