diff options
Diffstat (limited to 'tests/vpp/device/vm_vhost/l2bd')
| -rw-r--r-- | tests/vpp/device/vm_vhost/l2bd/eth2p-eth-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot | 116 | ||||
| -rw-r--r-- | tests/vpp/device/vm_vhost/l2bd/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot | 83 |
2 files changed, 83 insertions, 116 deletions
diff --git a/tests/vpp/device/vm_vhost/l2bd/eth2p-eth-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/l2bd/eth2p-eth-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot deleted file mode 100644 index 2a821a72c7..0000000000 --- a/tests/vpp/device/vm_vhost/l2bd/eth2p-eth-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot +++ /dev/null @@ -1,116 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.Trace -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| ... -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV -| ... | FUNCTEST | L2BDMACLRN | BASE | ETH | VHOST | 1VM -| ... -| Suite Setup | Setup suite single link -| Test Setup | Setup test -| Test Teardown | Tear down test | packet_trace | vhost -| ... -| Documentation | *L2 bridge-domain test cases with vhost user interface* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \ -| ... | VM and single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of \ -| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 \ -| ... | bridge-domains (L2BD) switching combined with MAC learning enabled. \ -| ... | Qemu Guest is connected to VPP via vhost-user interfaces. Guest is \ -| ... | configured with linux bridge interconnecting vhost-user interfaces. -| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets \ -| ... | are sent in both directions by TG on links to DUT1 via VM; on \ -| ... | receive TG verifies packets for correctness and their IPv4 (IPv6) \ -| ... | src-addr, dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC792 - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so -| ${nic_name}= | virtual -| ${bd_id1}= | 1 -| ${bd_id2}= | 2 -| ${sock1}= | /tmp/sock1 -| ${sock2}= | /tmp/sock2 - -*** Test Cases *** -| tc01-eth2p-ethip4-l2bdbasemaclrn-eth-2vhost-1vm-device -| | [Documentation] -| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 configure \ -| | ... | two L2BDs with MAC learning, each with vhost-user i/f to local \ -| | ... | VM and i/f to TG; configure VM to loop pkts back betwen its two \ -| | ... | virtio i/fs. [Ver] Make TG verify ICMPv4 Echo Req pkts are \ -| | ... | switched thru DUT1 and VM in both directions and are correct on \ -| | ... | receive. [Ref] -| | ... -| | Given Add PCI devices to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And VPP Enable Traces On All Duts | ${nodes} -| | When Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Configure interfaces in path up -| | And Configure vhost interfaces for L2BD forwarding | ${dut_node} -| | ... | ${sock1} -| | ... | ${sock2} -| | And Create bridge domain | ${dut_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut_node} | ${vhost_if1} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut_node} | ${bd_id2} -| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${bd_id2} -| | And Add interface to bridge domain | ${dut_node} | ${vhost_if2} -| | ... | ${bd_id2} -| | And Configure VM for vhost L2BD forwarding | ${dut_node} | ${sock1} -| | ... | ${sock2} -| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg_node} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2} - -| tc02-eth2p-ethip6-l2bdbasemaclrn-eth-2vhost-1vm-device -| | [Documentation] -| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 configure \ -| | ... | two L2BDs with MAC learning, each with vhost-user i/f to local \ -| | ... | VM and i/f to TG; configure VM to loop pkts back betwen its two \ -| | ... | virtio i/fs. [Ver] Make TG verify ICMPv6 Echo Req pkts are \ -| | ... | switched thru DUT1 and VM in both directions and are correct on \ -| | ... | receive. [Ref] -| | ... -| | Given Add PCI devices to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And VPP Enable Traces On All Duts | ${nodes} -| | When Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Configure interfaces in path up -| | And Configure vhost interfaces for L2BD forwarding | ${dut_node} -| | ... | ${sock1} -| | ... | ${sock2} -| | And Create bridge domain | ${dut_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut_node} | ${vhost_if1} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut_node} | ${bd_id2} -| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if2} -| | ... | ${bd_id2} -| | And Add interface to bridge domain | ${dut_node} | ${vhost_if2} -| | ... | ${bd_id2} -| | And Configure VM for vhost L2BD forwarding | ${dut_node} | ${sock1} -| | ... | ${sock2} -| | Then Send ICMPv6 bidirectionally and verify received packets | ${tg_node} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2} diff --git a/tests/vpp/device/vm_vhost/l2bd/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/l2bd/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot new file mode 100644 index 0000000000..8170466742 --- /dev/null +++ b/tests/vpp/device/vm_vhost/l2bd/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot @@ -0,0 +1,83 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Virtual | ETH | L2BDMACLRN | BASE | ICMP | VHOST | 1VM +| ... +| Suite Setup | Setup suite single link | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace | vhost +| ... +| Test Template | Local Template +| ... +| Documentation | *L2 bridge-domain test cases with vhost user interface* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \ +| ... | VM and single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of \ +| ... | IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 \ +| ... | bridge-domains (L2BD) switching combined with MAC learning enabled. \ +| ... | Qemu Guest is connected to VPP via vhost-user interfaces. Guest is \ +| ... | configured with VPP l2 cross-connect interconnecting vhost-user \ +| ... | interfaces. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in \ +| ... | both directions by TG on links to DUT1 via VM; on receive TG verifies \ +| ... | packets for correctness and their IPv4 src-addr, dst-addr and MAC \ +| ... | addresses. +| ... | *[Ref] Applicable standard specifications:* RFC792 + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so +| ${nic_name}= | virtual +| ${nf_chains}= | ${1} +| ${nf_nodes}= | ${1} +| ${nf_dtc} | ${1} +| ${nf_dtcr} | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 configure \ +| | ... | two L2BDs with MAC learning, each with vhost-user i/f to local \ +| | ... | VM and i/f to TG; configure VPP in VM to loop pkts back betwen its \ +| | ... | two virtio i/fs. [Ver] Make TG verify ICMPv4 Echo Req pkts are \ +| | ... | switched thru DUT1 and VM in both directions and are correct on \ +| | ... | receive. [Ref] +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize L2 bridge domains with Vhost-User | nf_nodes=${nf_nodes} +| | And Configure chains of NFs connected via vhost-user +| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | vnf=vpp_chain_l2xc +| | ... | pinning=${False} +| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg} +| | ... | ${tg_if1} | ${tg_if2} + +*** Test Cases *** +| tc01-eth2p-ethicmpv4-l2bdbasemaclrn-eth-2vhost-1vm-dev +| | [Tags] | 64B +| | frame_size=${64} | phy_cores=${0} |