aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/device/vm_vhost/l2xc
diff options
context:
space:
mode:
Diffstat (limited to 'tests/vpp/device/vm_vhost/l2xc')
-rw-r--r--tests/vpp/device/vm_vhost/l2xc/eth2p-eth-l2xcbase-eth-2vhost-1vm-dev.robot101
-rw-r--r--tests/vpp/device/vm_vhost/l2xc/eth2p-ethicmpv4-l2xcbase-eth-2vhost-1vm-dev.robot82
2 files changed, 82 insertions, 101 deletions
diff --git a/tests/vpp/device/vm_vhost/l2xc/eth2p-eth-l2xcbase-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/l2xc/eth2p-eth-l2xcbase-eth-2vhost-1vm-dev.robot
deleted file mode 100644
index a820bd2cbb..0000000000
--- a/tests/vpp/device/vm_vhost/l2xc/eth2p-eth-l2xcbase-eth-2vhost-1vm-dev.robot
+++ /dev/null
@@ -1,101 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.Trace
-| Library | resources.libraries.python.NodePath
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/l2/l2_xconnect.robot
-| Resource | resources/libraries/robot/l2/l2_traffic.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV
-| ... | FUNCTEST | L2XCFWD | BASE | ETH | VHOST | 1VM
-| ...
-| Suite Setup | Setup suite single link
-| Test Setup | Setup test
-| Test Teardown | Tear down test | packet_trace | vhost
-| ...
-| Documentation | *L2 cross-connect test cases with vhost user interface*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
-| ... | VM and single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of \
-| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect \
-| ... | (L2XC) switching. Qemu Guest is connected to VPP via vhost-user \
-| ... | interfaces. Guest is configured with linux bridge interconnecting \
-| ... | vhost-user interfaces.
-| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets \
-| ... | are sent in both directions by TG on links to DUT1 via VM; on receive \
-| ... | TG verifies packets for correctness and their IPv4 (IPv6) src-addr, \
-| ... | dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC792
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so
-| ${nic_name}= | virtual
-| ${sock1}= | /tmp/sock1
-| ${sock2}= | /tmp/sock2
-
-*** Test Cases ***
-| tc01-eth2p-ethip4-l2xcbase-eth-2vhost-1vm-device
-| | [Documentation]
-| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT configure \
-| | ... | two L2 cross-connects (L2XC), each with one untagged interface \
-| | ... | to TG and untagged i/f to local VM over vhost-user. [Ver] Make \
-| | ... | TG send ICMPv4 Echo Reqs in both directions between two of its \
-| | ... | i/fs to be switched by DUT to and from VM; verify all packets \
-| | ... | are received. [Ref]
-| | ...
-| | Given Add PCI devices to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP Enable Traces On All Duts | ${nodes}
-| | When Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Configure interfaces in path up
-| | And Configure vhost interfaces for L2BD forwarding | ${dut_node}
-| | ... | ${sock1} | ${sock2}
-| | And Configure L2XC | ${dut_node} | ${dut_to_tg_if1} | ${vhost_if1}
-| | And Configure L2XC | ${dut_node} | ${dut_to_tg_if2} | ${vhost_if2}
-| | And Configure VM for vhost L2BD forwarding | ${dut_node} | ${sock1}
-| | ... | ${sock2}
-| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg_node}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2}
-| | And Get Vhost dump | ${dut_node}
-
-| tc02-eth2p-ethip6-l2xcbase-eth-2vhost-1vm-device
-| | [Documentation]
-| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT configure \
-| | ... | two L2 cross-connects (L2XC), each with one untagged i/f to TG \
-| | ... | and untagged i/f to local VM over vhost-user. [Ver] Make TG send \
-| | ... | ICMPv6 Echo Reqs in both directions between two of its i/fs to \
-| | ... | be switched by DUT to and from VM; verify all packets are \
-| | ... | received. [Ref]
-| | ...
-| | Given Add PCI devices to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP Enable Traces On All Duts | ${nodes}
-| | When Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Configure interfaces in path up
-| | And Configure vhost interfaces for L2BD forwarding | ${dut_node}
-| | ... | ${sock1} | ${sock2}
-| | And Configure L2XC | ${dut_node} | ${dut_to_tg_if1} | ${vhost_if1}
-| | And Configure L2XC | ${dut_node} | ${dut_to_tg_if2} | ${vhost_if2}
-| | And Configure VM for vhost L2BD forwarding | ${dut_node} | ${sock1}
-| | ... | ${sock2}
-| | Then Send ICMPv6 bidirectionally and verify received packets | ${tg_node}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2}
diff --git a/tests/vpp/device/vm_vhost/l2xc/eth2p-ethicmpv4-l2xcbase-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/l2xc/eth2p-ethicmpv4-l2xcbase-eth-2vhost-1vm-dev.robot
new file mode 100644
index 0000000000..c5c6ab7ae6
--- /dev/null
+++ b/tests/vpp/device/vm_vhost/l2xc/eth2p-ethicmpv4-l2xcbase-eth-2vhost-1vm-dev.robot
@@ -0,0 +1,82 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| ...
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Virtual | ETH | L2XCFWD | BASE | ICMP | VHOST | 1VM
+| ...
+| Suite Setup | Setup suite single link | scapy
+| Test Setup | Setup test
+| Test Teardown | Tear down test | packet_trace | vhost
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *L2 cross-connect test cases with vhost user interface*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
+| ... | VM and single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of \
+| ... | IPv4.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect \
+| ... | (L2XC) switching. Qemu Guest is connected to VPP via vhost-user \
+| ... | interfaces. Guest is configured with VPP l2 cross-connect \
+| ... | interconnecting vhost-user interfaces.
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in \
+| ... | both directions by TG on links to DUT1 via VM; on receive TG verifies \
+| ... | packets for correctness and their IPv4 src-addr, dst-addr and MAC \
+| ... | addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC792
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${nic_name}= | virtual
+| ${nf_chains}= | ${1}
+| ${nf_nodes}= | ${1}
+| ${nf_dtc} | ${1}
+| ${nf_dtcr} | ${1}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT configure \
+| | ... | two L2 cross-connects (L2XC), each with one untagged interface \
+| | ... | to TG and untagged i/f to local VM over vhost-user. [Ver] Make \
+| | ... | TG send ICMPv4 Echo Reqs in both directions between two of its \
+| | ... | i/fs to be switched by DUT to and from VM; verify all packets \
+| | ... | are received. [Ref]
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | \${frame_size}
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add PCI devices to all DUTs
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
+| | When Initialize L2 xconnect with Vhost-User | nf_nodes=${nf_nodes}
+| | And Configure chains of NFs connected via vhost-user
+| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | vnf=vpp_chain_l2xc
+| | ... | pinning=${False}
+| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg}
+| | ... | ${tg_if1} | ${tg_if2}
+
+*** Test Cases ***
+| tc01-eth2p-ethicmpv4-l2xcbase-eth-2vhost-1vm-dev
+| | [Tags] | 64B
+| | frame_size=${64} | phy_cores=${0}