@@ -19,7 +19,7 @@ | ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethipv4-ip4base-eth-2memif-1dcr
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | container
|
@@ -47,6 +47,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${0}
# Container
| ${container_engine}= | Docker
@@ -78,8 +80,8 @@
| | And Initialize IPv4 routing with memif pairs
| | Then Send packet and verify headers
| | ... | ${tg} | 10.10.10.1 | 20.20.20.1
-| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
-| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
+| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0]
*** Test Cases ***
| tc01-64B-ethipv4-ip4base-eth-2memif-1dcr-dev
@@ -19,7 +19,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethipv4-l2bdbasemaclrn-eth-2memif-1dcr
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | container
|
@@ -47,6 +47,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${0}
# Container
| ${container_engine}= | Docker
@@ -77,7 +79,7 @@
| | And Start containers for test | auto_scale=${False} | pinning=${False}
| | And Initialize L2 Bridge Domain with memif pairs | auto_scale=${False}
| | Then Send IPv4 bidirectionally and verify received packets
-| | ... | ${tg} | ${tg_if1} | ${tg_if2}
+| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0]
*** Test Cases ***
| tc01-64B-ethipv4-l2bdbasemaclrn-eth-2memif-1dcr-dev
@@ -19,7 +19,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethipv4-l2xcbase-eth-2memif-1dcr
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | container
|
@@ -46,6 +46,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${0}
# Container
| ${container_engine}= | Docker
@@ -76,7 +78,7 @@
| | And Start containers for test | auto_scale=${False} | pinning=${False}
| | And Initialize L2 xconnect with memif pairs
| | Then Send IPv4 bidirectionally and verify received packets
-| | ... | ${tg} | ${tg_if1} | ${tg_if2}
+| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0]
*** Test Cases ***
| tc01-64B-ethipv4-l2xcbase-eth-2memif-1dcr-dev
@@ -19,7 +19,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethipv6-ip6base-eth-2memif-1dcr
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | container
|
@@ -48,6 +48,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${0}
# Container
| ${container_engine}= | Docker
@@ -85,15 +87,15 @@
| | And Assign Interface To Fib Table
| | ... | ${dut1} | ${memif_if2} | 20 | ipv6=${True}
| | And Assign Interface To Fib Table
-| | ... | ${dut1} | ${dut1_if2} | 20 | ipv6=${True}
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | 20 | ipv6=${True}
| | And VPP Interface Set IP Address
-| | ... | ${dut1} | ${dut1_if1} | 2001:1::1 | 64
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | 2001:1::1 | 64
| | And VPP Interface Set IP Address
| | ... | ${dut1} | ${memif_if1} | 2001:2::1 | 64
| | And VPP Interface Set IP Address
| | ... | ${dut1} | ${memif_if2} | 2001:2::2 | 64
| | And VPP Interface Set IP Address
-| | ... | ${dut1} | ${dut1_if2} | 2001:3::1 | 64
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | 2001:3::1 | 64
| | ${memif_if2_key}= | Get interface by sw index | ${nodes['DUT1']}
| | ... | ${memif_if2}
| | ${memif_if2_mac}= | Get interface MAC | ${nodes['DUT1']} | ${memif_if2_key}
@@ -105,11 +107,11 @@
| | VPP Add IP Neighbor
| | ... | ${dut1} | ${memif_if1} | 2001:2::2 | ${memif_if2_mac}
| | VPP Add IP Neighbor
-| | ... | ${dut1} | ${dut1_if2} | 2001:3::2 | ${tg_if2_mac}
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | 2001:3::2 | ${TG_pf2_mac}[0]
| | Then Send packet and verify headers
| | ... | ${tg} | 2001:1::1 | 2001:3::2
-| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
-| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
+| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0]
*** Test Cases ***
| tc01-78B-ethipv6-ip6base-eth-2memif-1dcr-dev
@@ -20,7 +20,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1tnlsw-ip4base-policy-aes-128-cbc-sha-512-256
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace
|
@@ -45,6 +45,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${54}
| ${tg_spi}= | ${1000}
| ${dut_spi}= | ${1001}
@@ -85,11 +87,12 @@
| | And Configure topology for IPv4 IPsec testing
| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
| | And Configure manual keyed connection for IPSec
-| | ... | ${dut1} | ${dut1_if1} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${encr_alg} | ${encr_key} | ${auth_alg}
| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${tg_dst_ip} | ${tg_src_ip}
| | ... | ${dut_tun_ip} | ${tg_tun_ip}
| | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg} | ${tg_if1} | ${tg_if2} | ${dut1_if1_mac} | ${dut1_if2_mac}
+| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0]
+| | ... | ${DUT1_vf1_mac}[0] | ${DUT1_vf2_mac}[0]
| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
| | ... | ${dut_spi} | ${tg_src_ip} | ${tg_dst_ip} | ${tg_tun_ip}
| | ... | ${dut_tun_ip}
@@ -20,7 +20,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1tptsw-ip4base-policy-aes-128-cbc-sha-512-256
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace
|
@@ -45,6 +45,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${54}
| ${tg_spi}= | ${1000}
| ${dut_spi}= | ${1001}
@@ -85,10 +87,11 @@
| | And Configure topology for IPv4 IPsec testing
| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
| | And Configure manual keyed connection for IPSec
-| | ... | ${dut1} | ${dut1_if1} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${encr_alg} | ${encr_key} | ${auth_alg}
| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${tg_dst_ip} | ${tg_src_ip}
| | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg} | ${tg_if1} | ${tg_if2} | ${dut1_if1_mac} | ${dut1_if2_mac}
+| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0]
+| | ... | ${DUT1_vf1_mac}[0] | ${DUT1_vf2_mac}[0]
| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
| | ... | ${dut_spi} | ${tg_src_ip} | ${tg_dst_ip}
@@ -20,7 +20,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip6ipsec1tnlsw-ip6base-policy-aes-128-cbc-sha-512-256
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace
|
@@ -45,6 +45,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${54}
| ${tg_spi}= | ${1000}
| ${dut_spi}= | ${1001}
@@ -86,11 +88,12 @@
| | And Configure topology for IPv6 IPsec testing
| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
| | And Configure manual keyed connection for IPSec
-| | ... | ${dut1} | ${dut1_if1} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${encr_alg} | ${encr_key} | ${auth_alg}
| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${tg_dst_ip} | ${tg_src_ip}
| | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE}
| | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg} | ${tg_if1} | ${tg_if2} | ${dut1_if1_mac} | ${dut1_if2_mac}
+| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0]
+| | ... | ${DUT1_vf1_mac}[0] | ${DUT1_vf2_mac}[0]
| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
| | ... | ${dut_spi} | ${tg_src_ip} | ${tg_dst_ip} | ${tg_tun_ip}
| | ... | ${dut_tun_ip}
@@ -20,7 +20,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip6ipsec1tptsw-ip6base-policy-aes-128-cbc-sha-512-256
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace
|
@@ -45,6 +45,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${58}
| ${tg_spi}= | ${1000}
| ${dut_spi}= | ${1001}
@@ -86,11 +88,12 @@
| | And Configure topology for IPv6 IPsec testing
| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
| | And Configure manual keyed connection for IPSec
-| | ... | ${dut1} | ${dut1_if1} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${encr_alg} | ${encr_key} | ${auth_alg}
| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${tg_dst_ip} | ${tg_src_ip}
| | ... | is_ipv6=${TRUE}
| | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg} | ${tg_if1} | ${tg_if2} | ${dut1_if1_mac} | ${dut1_if2_mac}
+| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0]
+| | ... | ${DUT1_vf1_mac}[0] | ${DUT1_vf2_mac}[0]
| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
| | ... | ${dut_spi} | ${tg_src_ip} | ${tg_dst_ip}
@@ -19,7 +19,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethicmpv4-ip4base-eth-1tap
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test | namespace
| Test Teardown | Tear down test | packet_trace | namespace
|
@@ -46,6 +46,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${0}
| ${tap1_VPP_ip}= | 16.0.10.1
| ${tap1_NM_ip}= | 16.0.10.2
@@ -82,18 +84,18 @@
| | And VPP Interface Set IP Address
| | ... | ${dut1} | ${int1} | ${tap1_VPP_ip} | ${prefix}
| | And VPP Interface Set IP Address
-| | ... | ${dut1} | ${dut1_if1} | ${dut_ip_address} | ${prefix}
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${dut_ip_address} | ${prefix}
| | And Set Interface State | ${dut1} | ${int1} | up
| | And Set Linux Interface MAC | ${dut1} | tap0 | ${tap1_NM_mac}
| | And Set Linux Interface IP | ${dut1} | tap0 | ${tap1_NM_ip} | ${prefix}
| | And Add Linux Route
| | ... | ${dut1} | ${tg_ip_address_GW} | ${prefix} | ${tap1_VPP_ip}
| | And VPP Add IP Neighbor
-| | ... | ${dut1} | ${dut1_if1} | ${tg_ip_address} | ${tg_if1_mac}
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${tg_ip_address} | ${TG_pf1_mac}[0]
| | And VPP Add IP Neighbor
| | ... | ${dut1} | ${int1} | ${tap1_NM_ip} | ${tap1_NM_mac}
| | Then Send ICMP echo request and verify answer
-| | ... | ${tg} | ${tg_if1} | ${dut1_if1_mac} | ${tg_if1_mac}
+| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_vf1_mac}[0] | ${TG_pf1_mac}[0]
| | ... | ${tap1_NM_ip} | ${tg_ip_address}
*** Test Cases ***
@@ -20,7 +20,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethicmpv4-ip4base-eth-1tap-namespace
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test | namespace
| Test Teardown | Tear down test | packet_trace | namespace
|
@@ -47,6 +47,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${0}
| ${tap1_VPP_ip}= | 16.0.10.1
| ${tap1_NM_ip}= | 16.0.10.2
@@ -84,7 +86,7 @@
| | And VPP Interface Set IP Address
| | ... | ${dut1} | ${int1} | ${tap1_VPP_ip} | ${prefix}
| | And VPP Interface Set IP Address
-| | ... | ${dut1} | ${dut1_if1} | ${dut_ip_address} | ${prefix}
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${dut_ip_address} | ${prefix}
| | And Set Interface State | ${dut1} | ${int1} | up
| | And Create Namespace | ${dut1} | nmspace1
| | And Attach Interface To Namespace | ${dut1} | nmspace1 | tap0
@@ -93,13 +95,13 @@
| | And Set Linux Interface IP
| | ... | ${dut1} | tap0 | ${tap1_NM_ip} | ${prefix} | nmspace1
| | And VPP Add IP Neighbor
-| | ... | ${dut1} | ${dut1_if1} | ${tg_ip_address} | ${tg_if1_mac}
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${tg_ip_address} | ${TG_pf1_mac}[0]
| | And VPP Add IP Neighbor
| | ... | ${dut1} | ${int1} | ${tap1_NM_ip} | ${tap1_NM_mac}
| | And Add Linux Route
| | ... | ${dut1} | ${tg_ip_address_GW} | ${prefix} | ${tap1_VPP_ip} | nmspace1
| | Then Send ICMP echo request and verify answer
-| | ... | ${tg} | ${tg_if1} | ${dut1_if1_mac} | ${tg_if1_mac}
+| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_vf1_mac}[0] | ${TG_pf1_mac}[0]
| | ... | ${tap1_NM_ip} | ${tg_ip_address}
*** Test Cases ***
@@ -19,7 +19,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethipv4-l2bdbasemaclrn-eth-2tap
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test | namespace
| Test Teardown | Tear down test | packet_trace | namespace | linux_bridge
|
@@ -47,6 +47,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${0}
| ${bid_TAP}= | tapBr
@@ -75,15 +77,15 @@
| | ${int2}= | And Add Tap Interface | ${dut1} | tap1
| | And Set Interface State | ${dut1} | ${int1} | up
| | And Set Interface State | ${dut1} | ${int2} | up
-| | And Create bridge domain | ${dut1} | 19 | learn=${TRUE}
-| | And Create bridge domain | ${dut1} | 20 | learn=${TRUE}
+| | And Create L2 BD | ${dut1} | 19 | learn=${TRUE}
+| | And Create L2 BD | ${dut1} | 20 | learn=${TRUE}
| | And Linux Add Bridge | ${dut1} | ${bid_TAP} | tap0 | tap1
| | And Add interface to bridge domain | ${dut1} | ${int1} | 20 | 0
-| | And Add interface to bridge domain | ${dut1} | ${dut1_if1} | 20 | 0
+| | And Add interface to bridge domain | ${dut1} | ${DUT1_${int}1}[0] | 20 | 0
| | And Add interface to bridge domain | ${dut1} | ${int2} | 19 | 0
-| | And Add interface to bridge domain | ${dut1} | ${dut1_if2} | 19 | 0
+| | And Add interface to bridge domain | ${dut1} | ${DUT1_${int}2}[0] | 19 | 0
| | Then Send IP packet and verify received packet
-| | ... | ${tg} | ${tg_if1} | ${tg_if2}
+| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0]
*** Test Cases ***
| tc01-64B-ethipv4-l2bdbasemaclrn-eth-2tap-dev
@@ -19,7 +19,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4-ip4base-copblklistbase
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace
|
@@ -45,6 +45,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${0}
*** Keywords ***
@@ -71,12 +73,12 @@
| | And Initialize IPv4 forwarding in circular topology
| | And Add Fib Table | ${dut1} | 1
| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE}
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP Add whitelist Entry | ${dut1} | ${DUT1_${int}1}[0] | ip4 | 1
+| | And COP interface enable or disable | ${dut1} | ${DUT1_${int}1}[0] | enable
| | Then Packet transmission from port to port should fail
| | ... | ${tg} | 100.0.0.2 | 200.0.0.2
-| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
-| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
+| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0]
*** Test Cases ***
| tc01-64B-ethip4-ip4base-copblklistbase-dev
@@ -19,7 +19,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4-ip4base-copwhtlistbase
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace
|
@@ -45,6 +45,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${0}
*** Keywords ***
@@ -71,12 +73,12 @@
| | And Initialize IPv4 forwarding in circular topology
| | And Add Fib Table | ${dut1} | 1
| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE}
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP Add whitelist Entry | ${dut1} | ${DUT1_${int}1}[0] | ip4 | 1
+| | And COP interface enable or disable | ${dut1} | ${DUT1_${int}1}[0] | enable
| | Then Send packet and verify headers
| | ... | ${tg} | 10.10.10.2 | 20.20.20.2
-| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
-| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
+| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0]
*** Test Cases ***
| tc01-64B-ethip4-ip4base-copwhtlistbase-dev
@@ -19,7 +19,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4-ip4base-iacldstbase
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | classify
|
@@ -45,6 +45,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${0}
*** Keywords ***
@@ -76,11 +78,11 @@
| | ... | ${dut1} | permit | ${table_idx} | ${skip_n} | ${match_n} | ip4 | dst
| | ... | 20.20.20.2
| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1} | ${dut1_if1} | ip4 | ${table_idx}
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | ip4 | ${table_idx}
| | Then Send packet and verify headers
| | ... | ${tg} | 10.10.10.2 | 20.20.20.2
-| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
-| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
+| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0]
*** Test Cases ***
| tc01-64B-ethip4-ip4base-iacldstbase-dev
@@ -19,7 +19,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4-ip4base-ipolicemarkbase
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | classify
|
@@ -44,6 +44,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${0}
| ${cir}= | ${100}
| ${eir}= | ${150}
@@ -78,7 +80,8 @@
| | And Initialize IPv4 forwarding in circular topology
| | And Initialize IPv4 policer 2r3c-'ca' in circular topology
| | Then Send packet and verify marking
-| | ... | ${tg} | ${tg_if1} | ${tg_if2} | ${tg_if1_mac} | ${dut1_if1_mac}
+| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0]
+| | ... | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
| | ... | 10.10.10.2 | 20.20.20.2
*** Test Cases ***
@@ -19,7 +19,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethipv4-ip4base
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace
|
@@ -45,6 +45,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${0}
*** Keywords ***
@@ -72,8 +74,8 @@
| | ... | remote_host1_ip=192.168.0.1 | remote_host2_ip=192.168.0.2
| | Then Send packet and verify headers
| | ... | ${tg} | 192.168.0.1 | 192.168.0.2
-| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
-| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
+| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0]
*** Test Cases ***
| tc01-64B-ethipv4-ip4base-dev
@@ -20,7 +20,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4vxlan-l2bdbasemaclrn
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace
|
@@ -47,6 +47,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${50}
*** Keywords ***
@@ -73,7 +75,8 @@
| | And Initialize layer ip4vxlan
| | And Initialize L2 bridge domain
| | Then Send VXLAN encapsulated packet and verify received packet
-| | ... | ${tg} | ${tg_if1} | ${tg_if2} | ${tg_if1_mac} | ${dut1_if1_mac}
+| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0]
+| | ... | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
| | ... | 172.17.0.2 | 172.16.0.1 | ${0} | 172.26.0.1 | 172.27.0.2 | ${0}
*** Test Cases ***
@@ -20,7 +20,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4vxlan-l2xcbase
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace
|
@@ -46,6 +46,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${50}
*** Keywords ***
@@ -72,7 +74,8 @@
| | And Initialize layer ip4vxlan
| | And Initialize L2 cross connect
| | Then Send VXLAN encapsulated packet and verify received packet
-| | ... | ${tg} | ${tg_if1} | ${tg_if2} | ${tg_if1_mac} | ${dut1_if1_mac}
+| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0]
+| | ... | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
| | ... | 172.17.0.2 | 172.16.0.1 | ${0} | 172.26.0.1 | 172.27.0.2 | ${0}
*** Test Cases ***
@@ -21,7 +21,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4lisp-ip4base
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace
|
@@ -50,6 +50,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${54}
*** Keywords ***
@@ -74,13 +76,13 @@
| | And Initialize layer interface
| | And Configure topology for IPv4 LISP testing
| | And Configure LISP in 2-node circular topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${NONE}
| | ... | ${duts_locator_set} | ${dut1_ip4_eid}
| | ... | ${dut1_to_tg_ip4_static_adjacency}
| | Then Send packet and verify LISP encap
| | ... | ${tg} | ${tg_if1_ip4} | ${dst_ip4}
-| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
-| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
+| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0]
| | ... | ${src_rloc4} | ${dst_rloc4}
*** Test Cases ***
@@ -21,7 +21,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4lispgpe-ip4base
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace
|
@@ -50,6 +50,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${54}
| ${is_gpe}= | ${1}
@@ -75,13 +77,13 @@
| | And Initialize layer interface
| | And Configure topology for IPv4 LISP testing
| | And Configure LISP in 2-node circular topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${NONE}
| | ... | ${duts_locator_set} | ${dut1_ip4_eid}
| | ... | ${dut1_to_tg_ip4_static_adjacency} | ${is_gpe}
| | Then Send packet and verify LISP GPE encap
| | ... | ${tg} | ${tg_if1_ip4} | ${dst_ip4}
-| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
-| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
+| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0]
| | ... | ${src_rloc4} | ${dst_rloc4}
*** Test Cases ***
@@ -21,7 +21,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4lispgpe-ip6base
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace
|
@@ -50,6 +50,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${54}
| ${ot_mode}= | 6to4
| ${is_gpe}= | ${1}
@@ -77,13 +79,13 @@
| | And Configure topology for IPv6 LISPoIP4 testing
| | And Vpp All RA Suppress Link Layer | ${nodes}
| | And Configure LISP in 2-node circular topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${NONE}
| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid}
| | ... | ${dut1_ip6o4_static_adjacency} | ${is_gpe}
| | Then Send packet and verify LISPoTunnel encap
| | ... | ${tg} | ${tg_if1_ip6} | ${dst_ip6}
-| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
-| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
+| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0]
| | ... | ${src_rloc4} | ${dst_rloc4} | ${ot_mode}
*** Test Cases ***
@@ -19,7 +19,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip6-ip6base-copblklistbase
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace
|
@@ -45,6 +45,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${0}
*** Keywords ***
@@ -71,12 +73,12 @@
| | And Initialize IPv6 forwarding in circular topology
| | And Add Fib Table | ${dut1} | 1 | ipv6=${True}
| | And Vpp Route Add | ${dut1} | 2002:1::0 | 64 | vrf=1 | local=${True}
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP Add whitelist Entry | ${dut1} | ${DUT1_${int}1}[0] | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${DUT1_${int}1}[0] | enable
| | Then Packet transmission from port to port should fail
| | ... | ${tg} | 2002:1::2 | 2002:2::2
-| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
-| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
+| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0]
*** Test Cases ***
| tc01-78B-ethip6-ip6base-copblklistbase-dev
@@ -19,7 +19,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip6-ip6base-copwhtlistbase
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace
|
@@ -45,6 +45,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${0}
*** Keywords ***
@@ -71,12 +73,12 @@
| | And Initialize IPv6 forwarding in circular topology
| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE}
| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE}
-| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
-| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP Add whitelist Entry | ${dut1} | ${DUT1_${int}1}[0] | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${DUT1_${int}1}[0] | enable
| | Then Send packet and verify headers
| | ... | ${tg} | 2001:1::2 | 2001:2::2
-| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
-| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
+| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0]
*** Test Cases ***
| tc01-78B-ethip6-ip6base-copwhtlistbase-dev
@@ -19,7 +19,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip6-ip6base-iacldstbase
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | classify
|
@@ -45,6 +45,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${0}
*** Keywords ***
@@ -76,11 +78,11 @@
| | ... | ${dut1} | permit | ${table_idx} | ${skip_n} | ${match_n} | ip6 | dst
| | ... | 2001:2::2
| | And Vpp Enable Input Acl Interface
-| | ... | ${dut1} | ${dut1_if1} | ip6 | ${table_idx}
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | ip6 | ${table_idx}
| | Then Send packet and verify headers
| | ... | ${tg} | 2001:1::2 | 2001:2::2
-| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
-| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
+| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0]
*** Test Cases ***
| tc01-78B-ethip6-ip6base-iacldstbase-dev
@@ -19,7 +19,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip6-ip6base-ipolicemarkbase
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | classify
|
@@ -44,6 +44,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${0}
| ${cir}= | ${100}
| ${eir}= | ${150}
@@ -75,7 +77,8 @@
| | And Initialize IPv6 forwarding in circular topology
| | And Initialize IPv6 policer 2r3c-'ca' in circular topology
| | Then Send packet and verify marking
-| | ... | ${tg} | ${tg_if1} | ${tg_if2} | ${tg_if1_mac} | ${dut1_if1_mac}
+| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0]
+| | ... | ${TG_pf1_mac}[0] | ${DUT1_${int}1_mac}[0]
| | ... | 2001:1::2 | 2001:2::2
*** Test Cases ***
@@ -19,7 +19,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethipv6-ip6base
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace
|
@@ -45,6 +45,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${0}
*** Keywords ***
@@ -72,8 +74,8 @@
| | ... | remote_host1_ip=3ffe:5f::1 | remote_host2_ip=3ffe:5f::2
| | Then Send packet and verify headers
| | ... | ${tg} | 3ffe:5f::1 | 3ffe:5f::2
-| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
-| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
+| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0]
*** Test Cases ***
| tc01-78B-ethipv6-ip6base-dev
@@ -21,7 +21,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip6lispgpe-ip4base
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace
|
@@ -49,6 +49,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${54}
| ${ot_mode}= | 4to6
| ${is_gpe}= | ${1}
@@ -76,13 +78,13 @@
| | And Configure topology for IPv4 LISPoIP6 testing
| | And Vpp All RA Suppress Link Layer | ${nodes}
| | And Configure LISP in 2-node circular topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${NONE}
| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid}
| | ... | ${dut1_ip4o6_static_adjacency} | ${is_gpe}
| | Then Send packet and verify LISPoTunnel encap
| | ... | ${tg} | ${tg_if1_ip4} | ${dst_ip4}
-| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
-| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
+| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0]
| | ... | ${src_rloc6} | ${dst_rloc6} | ${ot_mode}
*** Test Cases ***
@@ -21,7 +21,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip6lispgpe-ip6base
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace
|
@@ -50,6 +50,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${54}
| ${is_gpe}= | ${1}
@@ -75,13 +77,13 @@
| | And Initialize layer interface
| | And Configure topology for IPv6 LISP testing
| | And Configure LISP in 2-node circular topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${NONE}
| | ... | ${duts_locator_set} | ${dut1_ip6_eid}
| | ... | ${dut1_to_tg_ip6_static_adjacency} | ${is_gpe}
| | Then Send packet and verify LISP GPE encap
| | ... | ${tg} | ${tg_if1_ip6} | ${dst_ip6}
-| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
-| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
+| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0]
| | ... | ${src_rloc6} | ${dst_rloc6}
*** Test Cases ***
@@ -19,7 +19,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | avf-dot1q-l2bdbasemaclrn-gbp
|
-| Suite Setup | Setup suite single link | avf | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Suite Teardown | Tear down suite
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace
@@ -54,6 +54,8 @@
| ${nic_driver}= | avf
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 1
| ${overhead}= | ${4}
*** Keywords ***
@@ -83,8 +85,8 @@
| | And Initialize GBP routing domains
| | Then Send packet and verify headers
| | ... | ${tg} | 10.10.10.2 | 20.20.20.2
-| | ... | ${tg_if1} | ${tg_if1_mac} | ba:dc:00:ff:ee:01
-| | ... | ${tg_if2} | ba:dc:00:ff:ee:01 | ${tg_if2_mac}
+| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ba:dc:00:ff:ee:01
+| | ... | ${TG_pf2}[0] | ba:dc:00:ff:ee:01 | ${TG_pf2_mac}[0]
| | ... | traffic_script=send_ip_check_headers
*** Test Cases ***
@@ -19,7 +19,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | avf-dot1qip4-l2bdbasemaclrn
|
-| Suite Setup | Setup suite single link | avf | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Suite Teardown | Tear down suite
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace
@@ -46,6 +46,8 @@
| ${nic_driver}= | avf
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 1
| ${overhead}= | ${4}
*** Keywords ***
@@ -73,7 +75,7 @@
| | And Initialize layer dot1q
| | And Initialize L2 bridge domain
| | Then Send IPv4 bidirectionally and verify received packets
-| | ... | ${tg} | ${tg_if1} | ${tg_if2}
+| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0]
*** Test Cases ***
| tc01-68B-avf-dot1qip4-l2bdbasemaclrn-dev
@@ -19,7 +19,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethipv4-l2bdbasemaclrn
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace
|
@@ -46,6 +46,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${0}
*** Keywords ***
@@ -72,7 +74,7 @@
| | And Initialize layer interface
| | And Initialize L2 bridge domain
| | Then Send IPv4 bidirectionally and verify received packets
-| | ... | ${tg} | ${tg_if1} | ${tg_if2}
+| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0]
*** Test Cases ***
| tc01-64B-ethipv4-l2bdbasemaclrn-dev
@@ -19,7 +19,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4-l2patch
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace
|
@@ -45,6 +45,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${0}
*** Keywords ***
@@ -71,7 +73,7 @@
| | And Initialize layer interface
| | And Initialize L2 patch
| | Then Send IPv4 bidirectionally and verify received packets
-| | ... | ${tg} | ${tg_if1} | ${tg_if2}
+| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0]
*** Test Cases ***
| tc01-64B-ethip4-l2patch-dev
@@ -19,7 +19,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethipv4-l2xcbase
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace
|
@@ -46,6 +46,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${0}
*** Keywords ***
@@ -70,9 +72,9 @@
| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
-| | And Initialize L2 xconnect in 2-node circular topology
+| | And Initialize L2 cross connect
| | Then Send IPv4 bidirectionally and verify received packets
-| | ... | ${tg} | ${tg_if1} | ${tg_if2}
+| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0]
*** Test Cases ***
| tc01-64B-ethipv4-l2xcbase-dev
@@ -19,7 +19,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethipv4-ip4base-eth-2vhost-1vm
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | vhost
|
@@ -46,6 +46,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${0}
| ${nf_chains}= | ${1}
| ${nf_nodes}= | ${1}
@@ -84,8 +86,8 @@
| | ... | vnf=vpp_chain_ip4_noarp | pinning=${False}
| | Then Send packet and verify headers
| | ... | ${tg} | ${tg_if1_ip} | ${tg_if2_ip}
-| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
-| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
+| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0]
*** Test Cases ***
| tc01-64B-ethip4-ip4base-eth-2vhost-1vm-dev
@@ -19,7 +19,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethipv6-ip6base-eth-2vhost-1vm
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | vhost
|
@@ -46,6 +46,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${0}
| ${nf_chains}= | ${1}
| ${nf_nodes}= | ${1}
@@ -84,8 +86,8 @@
| | ... | pinning=${False}
| | Then Send packet and verify headers
| | ... | ${tg} | ${tg_if1_ip} | ${tg_if2_ip}
-| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
-| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
+| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0]
*** Test Cases ***
@@ -20,7 +20,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethipv4-l2bdbasemaclrn-eth-2vhost-1vm
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | vhost
|
@@ -49,6 +49,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${0}
| ${nf_chains}= | ${1}
| ${nf_nodes}= | ${1}
@@ -85,7 +87,7 @@
| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | vnf=vpp_chain_l2xc
| | ... | pinning=${False}
| | Then Send IPv4 bidirectionally and verify received packets | ${tg}
-| | ... | ${tg_if1} | ${tg_if2}
+| | ... | ${TG_pf1}[0] | ${TG_pf2}[0]
*** Test Cases ***
| tc01-64B-ethipv4-l2bdbasemaclrn-eth-2vhost-1vm-dev
@@ -19,7 +19,7 @@
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethipv4-l2xcbase-eth-2vhost-1vm
|
-| Suite Setup | Setup suite single link | scapy
+| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | vhost
|
@@ -47,6 +47,8 @@
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${overhead}= | ${0}
| ${nf_chains}= | ${1}
| ${nf_nodes}= | ${1}
@@ -83,7 +85,7 @@
| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | vnf=vpp_chain_l2xc
| | ... | pinning=${False}
| | Then Send IPv4 bidirectionally and verify received packets | ${tg}
-| | ... | ${tg_if1} | ${tg_if2}
+| | ... | ${TG_pf1}[0] | ${TG_pf2}[0]
*** Test Cases ***
| tc01-64B-ethipv4-l2xcbase-eth-2vhost-1vm-dev
