diff options
Diffstat (limited to 'tests/vpp/device')
2 files changed, 202 insertions, 0 deletions
diff --git a/tests/vpp/device/crypto/eth2p-ethip4ipsec11tnlsw-ip4base-int-aes128cbc-hmac512sha-dev.robot b/tests/vpp/device/crypto/eth2p-ethip4ipsec11tnlsw-ip4base-int-aes128cbc-hmac512sha-dev.robot new file mode 100644 index 0000000000..325c67ba21 --- /dev/null +++ b/tests/vpp/device/crypto/eth2p-ethip4ipsec11tnlsw-ip4base-int-aes128cbc-hmac512sha-dev.robot @@ -0,0 +1,101 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Virtual | IP4FWD | IPSEC | IPSECSW | IPSECINT | IP4BASE +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec11tnlsw-ip4base-int-aes128cbc-hmac512sha +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace +| +| Test Template | Local Template +| +| Documentation | *IPv4 IPsec tunnel mode test suite.* +| +| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ +| ... | between nodes. +| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure\ +| ... | loopback an physical interface IPv4 addresses, static ARP record, route\ +| ... | and IPsec manual keyed connection in tunnel mode. +| ... | *[Ver] TG verification:* ETH-IP4 packet is sent from TG to DUT1. Packet\ +| ... | is received on TG from DUT1. +| ... | *[Ref] Applicable standard specifications:* RFC4303. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | virtual +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${90} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${11} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] On DUT1 configure IPsec tunnel interfaces with encryption\ +| | ... | algorithm AES_128_CBC and integrity algorithm HMAC_SHA_512 in tunnel\ +| | ... | mode. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg} = | Crypto Alg AES CBC 128 +| | ${auth_alg} = | Integ Alg SHA 512 256 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | ${encr_key} | ${auth_key} | ${dut_spi} | ${tg_spi} = +| | ... | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Send IP Packet and verify ESP encapsulation in received packet +| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0] | ${DUT1_${int}1_mac}[0] +| | ... | ${DUT1_${int}2_mac}[0] | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${laddr_ip4} | ${raddr_ip4} +| | ... | ${tun_if1_ip4} | ${tun_if2_ip4} + +*** Test Cases *** +| tc01-154B-ethip4ipsec11tnlsw-ip4base-int-aes-128-cbc-sha-512-256-dev +| | [Tags] | 154B +| | frame_size=${154} | phy_cores=${0} diff --git a/tests/vpp/device/crypto/eth2p-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-dev.robot b/tests/vpp/device/crypto/eth2p-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-dev.robot new file mode 100644 index 0000000000..8d89dcda5c --- /dev/null +++ b/tests/vpp/device/crypto/eth2p-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-dev.robot @@ -0,0 +1,101 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY +| ... | NIC_Virtual | IP4FWD | IPSEC | IPSECSW | IPSECINT | IP4BASE +| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha +| +| Suite Setup | Setup suite topology interfaces | scapy +| Test Setup | Setup test +| Test Teardown | Tear down test | packet_trace +| +| Test Template | Local Template +| +| Documentation | *IPv4 IPsec tunnel mode test suite.* +| +| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ +| ... | between nodes. +| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure\ +| ... | loopback an physical interface IPv4 addresses, static ARP record, route\ +| ... | and IPsec manual keyed connection in tunnel mode. +| ... | *[Ver] TG verification:* ETH-IP4 packet is sent from TG to DUT1. Packet\ +| ... | is received on TG from DUT1. +| ... | *[Ref] Applicable standard specifications:* RFC4303. + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | crypto_native_plugin.so +| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | virtual +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${overhead}= | ${90} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${tun_if1_ip4}= | 100.0.0.1 +| ${tun_if2_ip4}= | 200.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${addr_range}= | ${24} +| ${n_tunnels}= | ${1} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] On DUT1 configure IPsec tunnel interface with encryption\ +| | ... | algorithm AES_128_CBC and integrity algorithm HMAC_SHA_512 in tunnel\ +| | ... | mode. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer. Type: integer +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg} = | Crypto Alg AES CBC 128 +| | ${auth_alg} = | Integ Alg SHA 512 256 +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs | with_trace=${True} +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize IPSec in 2-node circular topology +| | ${encr_key} | ${auth_key} | ${dut_spi} | ${tg_spi} = +| | ... | And VPP IPsec Create Tunnel Interfaces +| | ... | ${nodes} | ${tun_if1_ip4} | ${tun_if2_ip4} | ${DUT1_${int}2}[0] +| | ... | ${TG_pf2}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} +| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} +| | Then Send IP Packet and verify ESP encapsulation in received packet +| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0] | ${DUT1_${int}1_mac}[0] +| | ... | ${DUT1_${int}2_mac}[0] | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${laddr_ip4} | ${raddr_ip4} +| | ... | ${tun_if1_ip4} | ${tun_if2_ip4} + +*** Test Cases *** +| tc01-154B-ethip4ipsec1tnlsw-ip4base-int-aes-128-cbc-sha-512-256-dev +| | [Tags] | 154B +| | frame_size=${154} | phy_cores=${0} |