diff options
Diffstat (limited to 'tests/vpp/func/crypto/default/eth2p-ethip4ipsectptlispgpe-ip4base-func.robot')
| -rw-r--r-- | tests/vpp/func/crypto/default/eth2p-ethip4ipsectptlispgpe-ip4base-func.robot | 270 |
1 files changed, 270 insertions, 0 deletions
diff --git a/tests/vpp/func/crypto/default/eth2p-ethip4ipsectptlispgpe-ip4base-func.robot b/tests/vpp/func/crypto/default/eth2p-ethip4ipsectptlispgpe-ip4base-func.robot new file mode 100644 index 0000000000..15c10d40fc --- /dev/null +++ b/tests/vpp/func/crypto/default/eth2p-ethip4ipsectptlispgpe-ip4base-func.robot @@ -0,0 +1,270 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.LispUtil +| Library | resources.libraries.python.VhostUser +| Library | resources.libraries.python.QemuUtils +| Library | resources.libraries.python.VPPUtil +| Library | resources.libraries.python.IPsecUtil +| Resource | resources/libraries/robot/shared/traffic.robot +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/shared/interfaces.robot +| Resource | resources/libraries/robot/shared/testing_path.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| Resource | resources/libraries/robot/vm/qemu.robot +| Resource | resources/libraries/robot/overlay/lispgpe.robot +| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot +| Resource | resources/libraries/robot/overlay/l2lisp.robot +# Import configuration and test data: +| Variables | resources/test_data/lisp/ipv4_ipsec_lispgpe_ipv4/ipv4_ipsec_lispgpe_ipv4.py +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP | SKIP_VPP_PATCH +| ... +| Test Setup | Set up functional test +| ... +| Test Teardown | Tear down LISP functional test +| ... +| Documentation | *IPv4-ip4-ipsec-lispgpe-ip4 - main fib, vrf (gpe_vni-to-vrf)* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* ICMPv4-IPv4-IPSec-LISPGPE-IPv4-ICMPv4. +| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec.\ +| ... | IPsec is in transport mode. Tests cases are for IPsec configured both\ +| ... | on RLOC interface or lisp_gpe0 interface. +| ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1 to\ +| ... | DUT2 where it is forwarded to TG(if2). +| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303. + +*** Variables *** +| ${dut2_spi}= | ${1000} +| ${dut1_spi}= | ${1001} + +| ${ESP_PROTO}= | ${50} + +| ${bid}= | 10 + +*** Test Cases *** +| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on RLOC Int. +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2,\ +| | ... | Eth-IPv4-ICMPv4 on TG-DUTn. +| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\ +| | ... | IPsec in between DUTs. +| | ... | [Ver] Case: ip4-lispgpe-ipsec-ip4 - main fib +| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\ +| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830, RFC4303. +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Setup 3-node Topology +| | And Add IP Neighbors +| | And Configure LISP GPE topology in 3-node circular topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} +| | ... | ${dut1_to_dut2_ip4_static_adjacency} +| | ... | ${dut2_to_dut1_ip4_static_adjacency} +| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} +| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4} +| | And Configure manual keyed connection for IPSec +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} +| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} +| | Then Send packet and verify headers +| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send packet and verify headers +| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +| TC02: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) lisp_gpe0 Int. +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2,\ +| | ... | Eth-IPv4-ICMPv4 on TG-DUTn. +| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\ +| | ... | IPsec in between DUTs. +| | ... | [Ver] Case: ip4-ipsec-lispgpe-ip4 - main fib +| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\ +| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830, RFC4303. +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Setup 3-node Topology +| | And Add IP Neighbors +| | And Configure LISP GPE topology in 3-node circular topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} +| | ... | ${dut1_to_dut2_ip4_static_adjacency} +| | ... | ${dut2_to_dut1_ip4_static_adjacency} +| | ${lisp_if_idx}= | resources.libraries.python.InterfaceUtil.Get sw if index +| | ... | ${dut1_node} | lisp_gpe0 +| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut1_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} | ${tg1_ip4} +| | ... | ${tg2_ip4} +| | And Configure manual keyed connection for IPSec +| | ... | ${dut2_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} | ${tg2_ip4} +| | ... | ${tg1_ip4} +| | Then Send packet and verify headers +| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send packet and verify headers +| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +| TC03: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on RLOC Int and VRF on EID is enabled. +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2,\ +| | ... | Eth-IPv4-ICMPv4 on TG-DUTn. +| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\ +| | ... | IPsec in between DUTs. +| | ... | [Ver] Case: ip4-lispgpe-ipsec-ip4 - vrf, main fib +| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\ +| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830, RFC4303. +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Setup 3-node Topology | ${fib_table_1} +| | And Add IP Neighbors +| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | And Configure LISP GPE topology in 3-node circular topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} +| | ... | ${dut1_to_dut2_ip4_static_adjacency} +| | ... | ${dut2_to_dut1_ip4_static_adjacency} +| | ... | ${dut1_dut2_vni} | ${fib_table_1} +| | And Configure manual keyed connection for IPSec +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} +| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4} +| | And Configure manual keyed connection for IPSec +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} +| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} +| | Then Send packet and verify headers +| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send packet and verify headers +| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +| TC04: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int and VRF is enabled. +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2,\ +| | ... | Eth-IPv4-ICMPv4 on TG-DUTn. +| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\ +| | ... | IPsec in between DUTs. +| | ... | [Ver] Case: ip4-ipsec-lispgpe-ip4 - vrf, main fib +| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\ +| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830, RFC4303. +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Setup 3-node Topology | ${fib_table_1} +| | And Add IP Neighbors +| | And Configure LISP GPE topology in 3-node circular topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} +| | ... | ${dut1_to_dut2_ip4_static_adjacency} +| | ... | ${dut2_to_dut1_ip4_static_adjacency} +| | ... | ${dut1_dut2_vni} | ${fib_table_1} +| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | ${lisp_if_idx}= | resources.libraries.python.InterfaceUtil.Get sw if index +| | ... | ${dut1_node} | lisp_gpe0 +| | And Configure manual keyed connection for IPSec +| | ... | ${dut1_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} | ${tg1_ip4} +| | ... | ${tg2_ip4} +| | And Configure manual keyed connection for IPSec +| | ... | ${dut2_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} | ${tg2_ip4} +| | ... | ${tg1_ip4} +| | Then Send packet and verify headers +| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send packet and verify headers +| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +*** Keywords *** +| Setup 3-node Topology +| | [Documentation] +| | ... | Setup 3-node topology for this test suite. Set all physical\ +| | ... | interfaces up and assing IP adresses to them.\ +| | ... | You can specify fib table ID where the DUT-TG interfaces assign to.\ +| | ... | Default is 0. +| | ... +| | [Arguments] | ${fib_table}=0 +| | Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | Set interfaces in 3-node circular topology up +| | And Add Fib Table | ${dut1_node} | ${fib_table} +| | Assign Interface To Fib Table | ${dut1_node} +| | ... | ${dut1_to_tg} | ${fib_table} +| | And Add Fib Table | ${dut2_node} | ${fib_table} +| | Assign Interface To Fib Table | ${dut2_node} +| | ... | ${dut2_to_tg} | ${fib_table} +| | Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} +| | ... | ${prefix4} +| | Set Interface Address | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} +| | ... | ${prefix4} +| | Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} +| | ... | ${prefix4} +| | Set Interface Address | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} +| | ... | ${prefix4} + +| Add IP Neighbors +| | [Documentation] +| | ... | Add IP neighbors to physical interfaces on DUTs. +| | ... +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4} +| | ... | ${tg_to_dut1_mac} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4} +| | ... | ${tg_to_dut2_mac} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4} +| | ... | ${dut2_to_dut1_mac} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4} +| | ... | ${dut1_to_dut2_mac} |