diff options
Diffstat (limited to 'tests/vpp/func/crypto/default/eth2p-ethip6ipsectnl-ip6base-func.robot')
| -rw-r--r-- | tests/vpp/func/crypto/default/eth2p-ethip6ipsectnl-ip6base-func.robot | 523 |
1 files changed, 523 insertions, 0 deletions
diff --git a/tests/vpp/func/crypto/default/eth2p-ethip6ipsectnl-ip6base-func.robot b/tests/vpp/func/crypto/default/eth2p-ethip6ipsectnl-ip6base-func.robot new file mode 100644 index 0000000000..26d109a0b7 --- /dev/null +++ b/tests/vpp/func/crypto/default/eth2p-ethip6ipsectnl-ip6base-func.robot @@ -0,0 +1,523 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/crypto/ipsec.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO +| ... | VM_ENV | HW_ENV | SKIP_VPP_PATCH +| Test Setup | Set up IPv6 IPSec functional test +| ... +| Test Teardown | Tear down IPSec functional test | ${dut_node} +| ... +| Documentation | *IPv6 IPsec tunnel mode test suite.* +| ... +| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ +| ... | between nodes. +| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure +| ... | loopback an physical interface IPv6 addresses, static ARP record, route +| ... | and IPsec manual keyed connection in tunnel mode. +| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet +| ... | is received on TG from DUT1. +| ... | *[Ref] Applicable standard specifications:* RFC4303. + +*** Variables *** +| ${tg_spi}= | ${1000} +| ${dut_spi}= | ${1001} +| ${ESP_PROTO}= | ${50} +| ${tg_if_ip6}= | 3ffe:5f::1 +| ${dut_if_ip6}= | 3ffe:5f::2 +| ${tg_lo_ip6}= | 3ffe:60::3 +| ${dut_lo_ip6}= | 3ffe:60::4 +| ${ip6_plen}= | ${64} +| ${ip6_plen_rt}= | ${128} + +*** Test Cases *** +| TC01: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC02: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA1-96 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-192 and integrity algorithm SHA1-96 in tunnel mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 192 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC03: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA1-96 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-256 and integrity algorithm SHA1-96 in tunnel mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 256 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC04: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA-256-128 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-256-128 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC05: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA-256-128 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-256-128 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | ${encr_alg}= | Crypto Alg AES CBC 192 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC06: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA-256-128 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-256-128 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 256 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC07: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA-384-192 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-384-192 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 384 192 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC08: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA-384-192 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-384-192 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 192 +| | ${auth_alg}= | Integ Alg SHA 384 192 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC09: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA-384-192 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-384-192 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | ${encr_alg}= | Crypto Alg AES CBC 256 +| | ${auth_alg}= | Integ Alg SHA 384 192 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC10: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA-512-256 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-512-256 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC11: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA-512-256 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-512-256 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 192 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC12: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA-512-256 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-512-256 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | ${encr_alg}= | Crypto Alg AES CBC 256 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC13: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity - different encryption alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode. +| | ... | [Ver] Send an ESP packet encrypted by encryption key different from\ +| | ... | encryption key stored on VPP node from TG to VPP node and expect no\ +| | ... | response to be received on TG. +| | ... | [Ref] RFC4303. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC14: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity - different integrity alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode. +| | ... | [Ver] Send an ESP packet authenticated by integrity key different\ +| | ... | from integrity key stored on VPP node from TG to VPP node and expect\ +| | ... | no response to be received on TG. +| | ... | [Ref] RFC4303. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC15: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity - different encryption and integrity alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode. +| | ... | [Ver] Send an ESP packet authenticated by integrity key and encrypted\ +| | ... | by encryption key different from integrity and encryption keys stored\ +| | ... | on VPP node from TG to VPP node and expect no response to be received\ +| | ... | on TG. +| | ... | [Ref] RFC4303. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto +| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC16: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel\ +| | ... | mode. Then update SA keys - use new keys. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node before\ +| | ... | and after SA keys update. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} +| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto +| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ +| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} +| | ... | ${new_encr_key} | ${new_auth_key} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${new_encr_key} | ${auth_alg} | ${new_auth_key} +| | ... | ${tg_spi} | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC17: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different encryption alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel +| | ... | mode. Then update SA keys - use new keys. +| | ... | [Ver] Send an ESP packet encrypted by encryption key different from\ +| | ... | encryption key stored on VPP node from TG to VPP node and expect no\ +| | ... | response to be received on TG before and after SA keys update. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} +| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto +| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ +| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} +| | ... | ${new_encr_key} | ${new_auth_key} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${new_auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC18: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different integrity alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel\ +| | ... | mode. Then update SA keys - use new keys. +| | ... | [Ver] Send an ESP packet authenticated by integrity key different\ +| | ... | from integrity key stored on VPP node from TG to VPP node and expect\ +| | ... | no response to be received on TG before and after SA keys update. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} +| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto +| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ +| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} +| | ... | ${new_encr_key} | ${new_auth_key} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${new_encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC19: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different encryption and integrity alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel\ +| | ... | mode. Then update SA keys - use new keys. +| | ... | [Ver] Send an ESP packet authenticated by integrity key and encrypted\ +| | ... | by encryption key different from integrity and encryption keys stored\ +| | ... | on VPP node from TG to VPP node and expect no response to be received\ +| | ... | on TG before and after SA keys update. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto +| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} +| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto +| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ +| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} +| | ... | ${new_encr_key} | ${new_auth_key} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +*** Keywords *** +| Get Second Random String +| | [Arguments] | ${req_alg} | ${req_type} +| | ${req_key_len}= | Run Keyword | Get ${req_type} Alg Key Len | ${req_alg} +| | ${key}= | Set Variable If | '${req_type}' == 'Crypto' | ${encr_key} +| | ... | '${req_type}' == 'Integ' | ${auth_key} +| | :FOR | ${index} | IN RANGE | 100 +| | | ${req_key}= | Generate Random String | ${req_key_len} +| | | Return From Keyword If | '${req_key}' != '${key}' | ${req_key} |