diff options
Diffstat (limited to 'tests/vpp/func/crypto/default')
9 files changed, 0 insertions, 2935 deletions
diff --git a/tests/vpp/func/crypto/default/eth2p-ethip4ipsectnl-ip4base-func.robot b/tests/vpp/func/crypto/default/eth2p-ethip4ipsectnl-ip4base-func.robot deleted file mode 100644 index 2cab1cdd44..0000000000 --- a/tests/vpp/func/crypto/default/eth2p-ethip4ipsectnl-ip4base-func.robot +++ /dev/null @@ -1,524 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/crypto/ipsec.robot -| Library | resources.libraries.python.Trace -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO -| ... | VM_ENV | HW_ENV | SKIP_VPP_PATCH -| ... -| Test Setup | Set up IPv4 IPSec functional test -| ... -| Test Teardown | Tear down IPSec functional test | ${dut_node} -| ... -| Documentation | *IPv4 IPsec tunnel mode test suite.* -| ... -| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ -| ... | between nodes. -| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure\ -| ... | loopback an physical interface IPv4 addresses, static ARP record, route\ -| ... | and IPsec manual keyed connection in tunnel mode. -| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet\ -| ... | is received on TG from DUT1. -| ... | *[Ref] Applicable standard specifications:* RFC4303. - -*** Variables *** -| ${tg_spi}= | ${1000} -| ${dut_spi}= | ${1001} -| ${ESP_PROTO}= | ${50} -| ${tg_if_ip4}= | 192.168.100.2 -| ${dut_if_ip4}= | 192.168.100.3 -| ${tg_lo_ip4}= | 192.168.3.3 -| ${dut_lo_ip4}= | 192.168.4.4 -| ${ip4_plen}= | ${24} - -*** Test Cases *** -| TC01: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC02: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA1-96 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-192 and integrity algorithm SHA1-96 in tunnel mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 192 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC03: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA1-96 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-256 and integrity algorithm SHA1-96 in tunnel mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 256 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC04: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA-256-128 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-256-128 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC05: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA-256-128 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-256-128 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ${encr_alg}= | Crypto Alg AES CBC 192 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC06: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA-256-128 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-256-128 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 256 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC07: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA-384-192 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-384-192 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 384 192 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC08: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA-384-192 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-384-192 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 192 -| | ${auth_alg}= | Integ Alg SHA 384 192 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC09: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA-384-192 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-384-192 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ${encr_alg}= | Crypto Alg AES CBC 256 -| | ${auth_alg}= | Integ Alg SHA 384 192 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC10: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA-512-256 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-512-256 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC11: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA-512-256 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-512-256 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 192 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC12: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA-512-256 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-512-256 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ${encr_alg}= | Crypto Alg AES CBC 256 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC13: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity - different encryption alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode. -| | ... | [Ver] Send an ESP packet encrypted by encryption key different from\ -| | ... | encryption key stored on VPP node from TG to VPP node and expect no\ -| | ... | response to be received on TG. -| | ... | [Ref] RFC4303. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC14: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity - different integrity alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode. -| | ... | [Ver] Send an ESP packet authenticated by integrity key different\ -| | ... | from integrity key stored on VPP node from TG to VPP node and expect\ -| | ... | no response to be received on TG. -| | ... | [Ref] RFC4303. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC15: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity - different encryption and integrity alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode. -| | ... | [Ver] Send an ESP packet authenticated by integrity key and encrypted\ -| | ... | by encryption key different from integrity and encryption keys stored\ -| | ... | on VPP node from TG to VPP node and expect no response to be received\ -| | ... | on TG. -| | ... | [Ref] RFC4303. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto -| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC16: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel\ -| | ... | mode. Then update SA keys - use new keys. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node before\ -| | ... | and after SA keys update. -| | [Tags] | EXPECTED_FAILING -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} -| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto -| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ -| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} -| | ... | ${new_encr_key} | ${new_auth_key} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${new_encr_key} | ${auth_alg} | ${new_auth_key} -| | ... | ${tg_spi} | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC17: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different encryption alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel -| | ... | mode. Then update SA keys - use new keys. -| | ... | [Ver] Send an ESP packet encrypted by encryption key different from\ -| | ... | encryption key stored on VPP node from TG to VPP node and expect no\ -| | ... | response to be received on TG before and after SA keys update. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} -| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto -| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ -| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} -| | ... | ${new_encr_key} | ${new_auth_key} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${new_auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC18: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different integrity alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel\ -| | ... | mode. Then update SA keys - use new keys. -| | ... | [Ver] Send an ESP packet authenticated by integrity key different\ -| | ... | from integrity key stored on VPP node from TG to VPP node and expect\ -| | ... | no response to be received on TG before and after SA keys update. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} -| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto -| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ -| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} -| | ... | ${new_encr_key} | ${new_auth_key} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${new_encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC19: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different encryption and integrity alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel\ -| | ... | mode. Then update SA keys - use new keys. -| | ... | [Ver] Send an ESP packet authenticated by integrity key and encrypted\ -| | ... | by encryption key different from integrity and encryption keys stored\ -| | ... | on VPP node from TG to VPP node and expect no response to be received\ -| | ... | on TG before and after SA keys update. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto -| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} -| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto -| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ -| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} -| | ... | ${new_encr_key} | ${new_auth_key} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -*** Keywords *** -| Get Second Random String -| | [Arguments] | ${req_alg} | ${req_type} -| | ${req_key_len}= | Run Keyword | Get ${req_type} Alg Key Len | ${req_alg} -| | ${key}= | Set Variable If | '${req_type}' == 'Crypto' | ${encr_key} -| | ... | '${req_type}' == 'Integ' | ${auth_key} -| | :FOR | ${index} | IN RANGE | 100 -| | | ${req_key}= | Generate Random String | ${req_key_len} -| | | Return From Keyword If | '${req_key}' != '${key}' | ${req_key} diff --git a/tests/vpp/func/crypto/default/eth2p-ethip4ipsectpt-ip4base-func.robot b/tests/vpp/func/crypto/default/eth2p-ethip4ipsectpt-ip4base-func.robot deleted file mode 100644 index 009889b2dc..0000000000 --- a/tests/vpp/func/crypto/default/eth2p-ethip4ipsectpt-ip4base-func.robot +++ /dev/null @@ -1,488 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/crypto/ipsec.robot -| Library | resources.libraries.python.Trace -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO -| ... | VM_ENV | HW_ENV | SKIP_VPP_PATCH -| Test Setup | Set up IPv4 IPSec functional test -| ... -| Test Teardown | Tear down IPSec functional test | ${dut_node} -| ... -| Documentation | *IPv4 IPsec transport mode test suite.* -| ... -| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ -| ... | between nodes. -| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure\ -| ... | loopback an physical interface IPv4 addresses, static ARP record, route\ -| ... | and IPsec manual keyed connection in transport mode. -| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet\ -| ... | is received on TG from DUT1. -| ... | *[Ref] Applicable standard specifications:* RFC4303. - -*** Variables *** -| ${tg_spi}= | ${1000} -| ${dut_spi}= | ${1001} -| ${ESP_PROTO}= | ${50} -| ${tg_if_ip4}= | 192.168.100.2 -| ${dut_if_ip4}= | 192.168.100.3 -| ${tg_lo_ip4}= | 192.168.3.3 -| ${dut_lo_ip4}= | 192.168.4.4 -| ${ip4_plen}= | ${24} - -*** Test Cases *** -| TC01: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC02: VPP process ESP packet in Transport Mode with AES-CBC-192 encryption and SHA1-96 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-192 and integrity algorithm SHA1-96 in transport -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 192 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC03: VPP process ESP packet in Transport Mode with AES-CBC-256 encryption and SHA1-96 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-256 and integrity algorithm SHA1-96 in transport -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 256 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC04: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA-256-128 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-256-128 in transport -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC05: VPP process ESP packet in Transport Mode with AES-CBC-192 encryption and SHA-256-128 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-256-128 in transport -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ${encr_alg}= | Crypto Alg AES CBC 192 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC06: VPP process ESP packet in Transport Mode with AES-CBC-256 encryption and SHA-256-128 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-256-128 in transport -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 256 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC07: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA-384-192 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-384-192 in transport -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 384 192 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC08: VPP process ESP packet in Transport Mode with AES-CBC-192 encryption and SHA-384-192 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-384-192 in transport -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 192 -| | ${auth_alg}= | Integ Alg SHA 384 192 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC09: VPP process ESP packet in Transport Mode with AES-CBC-256 encryption and SHA-384-192 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-384-192 in transport -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ${encr_alg}= | Crypto Alg AES CBC 256 -| | ${auth_alg}= | Integ Alg SHA 384 192 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC10: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA-512-256 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-512-256 in transport -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC11: VPP process ESP packet in Transport Mode with AES-CBC-192 encryption and SHA-512-256 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-512-256 in transport -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 192 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC12: VPP process ESP packet in Transport Mode with AES-CBC-256 encryption and SHA-512-256 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-512-256 in transport -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ${encr_alg}= | Crypto Alg AES CBC 256 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - - -| TC13: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity - different encryption alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\ -| | ... | mode. -| | ... | [Ver] Send an ESP packet encrypted by encryption key different from\ -| | ... | encryption key stored on VPP node from TG to VPP node and expect no\ -| | ... | response to be received on TG. -| | ... | [Ref] RFC4303. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC14: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity - different integrity alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\ -| | ... | mode. -| | ... | [Ver] Send an ESP packet authenticated by integrity key different\ -| | ... | from integrity key stored on VPP node from TG to VPP node and expect\ -| | ... | no response to be received on TG. -| | ... | [Ref] RFC4303. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC15: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity - different encryption and integrity alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\ -| | ... | mode. -| | ... | [Ver] Send an ESP packet authenticated by integrity key and encrypted\ -| | ... | by encryption key different from integrity and encryption keys stored\ -| | ... | on VPP node from TG to VPP node and expect no response to be received\ -| | ... | on TG. -| | ... | [Ref] RFC4303. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto -| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC16: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\ -| | ... | mode. Then update SA keys - use new keys. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node before\ -| | ... | and after SA keys update. -| | [Tags] | EXPECTED_FAILING -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} -| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto -| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ -| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} -| | ... | ${new_encr_key} | ${new_auth_key} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${new_encr_key} | ${auth_alg} | ${new_auth_key} -| | ... | ${tg_spi} | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC17: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different encryption alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\ -| | ... | mode. Then update SA keys - use new keys. -| | ... | [Ver] Send an ESP packet encrypted by encryption key different from\ -| | ... | encryption key stored on VPP node from TG to VPP node and expect no\ -| | ... | response to be received on TG before and after SA keys update. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} -| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto -| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ -| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} -| | ... | ${new_encr_key} | ${new_auth_key} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${new_auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC18: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different integrity alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\ -| | ... | mode. Then update SA keys - use new keys. -| | ... | [Ver] Send an ESP packet authenticated by integrity key different\ -| | ... | from integrity key stored on VPP node from TG to VPP node and expect\ -| | ... | no response to be received on TG before and after SA keys update. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} -| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto -| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ -| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} -| | ... | ${new_encr_key} | ${new_auth_key} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${new_encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC19: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different encryption and integrity alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\ -| | ... | mode. Then update SA keys - use new keys. -| | ... | [Ver] Send an ESP packet authenticated by integrity key and encrypted\ -| | ... | by encryption key different from integrity and encryption keys stored\ -| | ... | on VPP node from TG to VPP node and expect no response to be received\ -| | ... | on TG before and after SA keys update. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto -| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} -| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto -| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ -| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} -| | ... | ${new_encr_key} | ${new_auth_key} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -*** Keywords *** -| Get Second Random String -| | [Arguments] | ${req_alg} | ${req_type} -| | ${req_key_len}= | Run Keyword | Get ${req_type} Alg Key Len | ${req_alg} -| | ${key}= | Set Variable If | '${req_type}' == 'Crypto' | ${encr_key} -| | ... | '${req_type}' == 'Integ' | ${auth_key} -| | :FOR | ${index} | IN RANGE | 100 -| | | ${req_key}= | Generate Random String | ${req_key_len} -| | | Return From Keyword If | '${req_key}' != '${key}' | ${req_key} diff --git a/tests/vpp/func/crypto/default/eth2p-ethip4ipsectptlispgpe-ip4base-func.robot b/tests/vpp/func/crypto/default/eth2p-ethip4ipsectptlispgpe-ip4base-func.robot deleted file mode 100644 index f13ccbcb10..0000000000 --- a/tests/vpp/func/crypto/default/eth2p-ethip4ipsectptlispgpe-ip4base-func.robot +++ /dev/null @@ -1,272 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.topology.Topology -| Library | resources.libraries.python.NodePath -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.LispUtil -| Library | resources.libraries.python.VPPUtil -| Library | resources.libraries.python.IPsecUtil -| Resource | resources/libraries/robot/shared/traffic.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| Resource | resources/libraries/robot/vm/qemu.robot -| Resource | resources/libraries/robot/overlay/lispgpe.robot -| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot -| Resource | resources/libraries/robot/overlay/l2lisp.robot -# Import configuration and test data: -| Variables | resources/test_data/lisp/ipv4_ipsec_lispgpe_ipv4/ipv4_ipsec_lispgpe_ipv4.py -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP | SKIP_VPP_PATCH -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down LISP functional test -| ... -| Documentation | *IPv4-ip4-ipsec-lispgpe-ip4 - main fib, vrf (gpe_vni-to-vrf)* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* ICMPv4-IPv4-IPSec-LISPGPE-IPv4-ICMPv4. -| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec.\ -| ... | IPsec is in transport mode. Tests cases are for IPsec configured both\ -| ... | on RLOC interface or lisp_gpe0 interface. -| ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1 to\ -| ... | DUT2 where it is forwarded to TG(if2). -| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303. - -*** Variables *** -| ${dut2_spi}= | ${1000} -| ${dut1_spi}= | ${1001} - -| ${ESP_PROTO}= | ${50} - -| ${bid}= | 10 - -*** Test Cases *** -| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on RLOC Int. -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2,\ -| | ... | Eth-IPv4-ICMPv4 on TG-DUTn. -| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTs. -| | ... | [Ver] Case: ip4-lispgpe-ipsec-ip4 - main fib -| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\ -| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | ... -| | [Tags] | EXPECTED_FAILING -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Setup 3-node Topology -| | And Add IP Neighbors -| | And Configure LISP GPE topology in 3-node circular topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} -| | ... | ${dut1_to_dut2_ip4_static_adjacency} -| | ... | ${dut2_to_dut1_ip4_static_adjacency} -| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} -| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4} -| | And Configure manual keyed connection for IPSec -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} -| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} -| | Then Send packet and verify headers -| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers -| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -| TC02: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) lisp_gpe0 Int. -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2,\ -| | ... | Eth-IPv4-ICMPv4 on TG-DUTn. -| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTs. -| | ... | [Ver] Case: ip4-ipsec-lispgpe-ip4 - main fib -| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\ -| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Setup 3-node Topology -| | And Add IP Neighbors -| | And Configure LISP GPE topology in 3-node circular topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} -| | ... | ${dut1_to_dut2_ip4_static_adjacency} -| | ... | ${dut2_to_dut1_ip4_static_adjacency} -| | ${lisp_if_idx}= | resources.libraries.python.InterfaceUtil.Get sw if index -| | ... | ${dut1_node} | lisp_gpe0 -| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut1_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} | ${tg1_ip4} -| | ... | ${tg2_ip4} -| | And Configure manual keyed connection for IPSec -| | ... | ${dut2_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} | ${tg2_ip4} -| | ... | ${tg1_ip4} -| | Then Send packet and verify headers -| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers -| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -| TC03: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on RLOC Int and VRF on EID is enabled. -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2,\ -| | ... | Eth-IPv4-ICMPv4 on TG-DUTn. -| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTs. -| | ... | [Ver] Case: ip4-lispgpe-ipsec-ip4 - vrf, main fib -| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\ -| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | ... -| | [Tags] | EXPECTED_FAILING -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Setup 3-node Topology | ${fib_table_1} -| | And Add IP Neighbors -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And Configure LISP GPE topology in 3-node circular topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} -| | ... | ${dut1_to_dut2_ip4_static_adjacency} -| | ... | ${dut2_to_dut1_ip4_static_adjacency} -| | ... | ${dut1_dut2_vni} | ${fib_table_1} -| | And Configure manual keyed connection for IPSec -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} -| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4} -| | And Configure manual keyed connection for IPSec -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} -| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} -| | Then Send packet and verify headers -| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers -| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -| TC04: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int and VRF is enabled. -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2,\ -| | ... | Eth-IPv4-ICMPv4 on TG-DUTn. -| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTs. -| | ... | [Ver] Case: ip4-ipsec-lispgpe-ip4 - vrf, main fib -| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\ -| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Setup 3-node Topology | ${fib_table_1} -| | And Add IP Neighbors -| | And Configure LISP GPE topology in 3-node circular topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} -| | ... | ${dut1_to_dut2_ip4_static_adjacency} -| | ... | ${dut2_to_dut1_ip4_static_adjacency} -| | ... | ${dut1_dut2_vni} | ${fib_table_1} -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | ${lisp_if_idx}= | resources.libraries.python.InterfaceUtil.Get sw if index -| | ... | ${dut1_node} | lisp_gpe0 -| | And Configure manual keyed connection for IPSec -| | ... | ${dut1_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} | ${tg1_ip4} -| | ... | ${tg2_ip4} -| | And Configure manual keyed connection for IPSec -| | ... | ${dut2_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} | ${tg2_ip4} -| | ... | ${tg1_ip4} -| | Then Send packet and verify headers -| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers -| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -*** Keywords *** -| Setup 3-node Topology -| | [Documentation] -| | ... | Setup 3-node topology for this test suite. Set all physical\ -| | ... | interfaces up and assing IP adresses to them.\ -| | ... | You can specify fib table ID where the DUT-TG interfaces assign to.\ -| | ... | Default is 0. -| | ... -| | [Arguments] | ${fib_table}=0 -| | Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | Set interfaces in 3-node circular topology up -| | And Add Fib Table | ${dut1_node} | ${fib_table} -| | Assign Interface To Fib Table | ${dut1_node} -| | ... | ${dut1_to_tg} | ${fib_table} -| | And Add Fib Table | ${dut2_node} | ${fib_table} -| | Assign Interface To Fib Table | ${dut2_node} -| | ... | ${dut2_to_tg} | ${fib_table} -| | Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} -| | ... | ${prefix4} -| | Set Interface Address | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} -| | ... | ${prefix4} -| | Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} -| | ... | ${prefix4} -| | Set Interface Address | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} -| | ... | ${prefix4} - -| Add IP Neighbors -| | [Documentation] -| | ... | Add IP neighbors to physical interfaces on DUTs. -| | ... -| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4} -| | ... | ${tg_to_dut1_mac} -| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4} -| | ... | ${tg_to_dut2_mac} -| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4} -| | ... | ${dut2_to_dut1_mac} -| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4} -| | ... | ${dut1_to_dut2_mac} diff --git a/tests/vpp/func/crypto/default/eth2p-ethip4ipsectptlispgpe-ip6base-func.robot b/tests/vpp/func/crypto/default/eth2p-ethip4ipsectptlispgpe-ip6base-func.robot deleted file mode 100644 index 4e1b6973d9..0000000000 --- a/tests/vpp/func/crypto/default/eth2p-ethip4ipsectptlispgpe-ip6base-func.robot +++ /dev/null @@ -1,160 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.topology.Topology -| Library | resources.libraries.python.NodePath -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.L2Util -| Library | resources.libraries.python.LispUtil -| Library | resources.libraries.python.IPsecUtil -| Library | resources.libraries.python.VatJsonUtil -| Library | resources.libraries.python.IPv6Setup -| Library | resources.libraries.python.VPPUtil -| Library | String -| Resource | resources/libraries/robot/shared/traffic.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/ip/ip6.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| Resource | resources/libraries/robot/vm/qemu.robot -| Resource | resources/libraries/robot/overlay/lispgpe.robot -| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot -# Import configuration and test data: -| Variables | resources/test_data/lisp/ipv6_lispgpe_ipv4/ipv6_lispgpe_ipsec_ipv4.py -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP | SKIP_VPP_PATCH -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down LISP functional test -| ... -| Documentation | *IPv6 - ip4-ipsec-lispgpe-ip6 - main fib, vrf, virt2lisp,\ -| ... | phy2lisp* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISPGPE-IPSec-IPv6-ICMP,\ -| ... | Eth-IPv4-IPSec-LISPGPE-IPv6-ICMP -| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec.\ -| ... | IPsec is in transport mode. Tests cases are for IPsec configured both\ -| ... | on RLOC interface or lisp_gpe0 interface. -| ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1 to\ -| ... | DUT2 where it is forwarded to TG(if2). -| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303. - -*** Test Cases *** -| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on RLOC Int. -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv4-LISPGPE-IPSec-IPv6-ICMP on DUT1-DUT2, Eth-IPv6-ICMP\ -| | ... | on TG-DUTn. -| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTS. -| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across\ -| | ... | both DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | ... -| | [Tags] | EXPECTED_FAILING -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Setup Topology And Lisp -| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} -| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4} -| | And Configure manual keyed connection for IPSec -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} -| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} -| | Then Send packet and verify headers -| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers -| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -| TC02: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int. -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMP\ -| | ... | on TG-DUTn. -| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTS. -| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across\ -| | ... | both DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Setup Topology And Lisp -| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | ${lisp_if_idx}= | resources.libraries.python.InterfaceUtil.get sw if index -| | ... | ${dut1_node} | ${lisp_gpe_int} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut1_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} -| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4} -| | And Configure manual keyed connection for IPSec -| | ... | ${dut2_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} -| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} -| | Then Send packet and verify headers -| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers -| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -*** Keywords *** -| Setup Topology And Lisp -| | [Documentation] | Setup IPs and neighbors for interfaces on DUT1 and DUT2\ -| | ... | and then setup LISP. -| | [Arguments] | ${fib_table}=0 | ${vni_table}=0 | ${ip6}=${FALSE} -| | Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | Set interfaces in 3-node circular topology up -| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} -| | ... | ${prefix4} -| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} -| | ... | ${prefix6} -| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} -| | ... | ${prefix4} -| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} -| | ... | ${prefix6} -| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6} -| | ... | ${tg_to_dut2_mac} -| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4} -| | ... | ${dut2_to_dut1_mac} -| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4} -| | ... | ${dut1_to_dut2_mac} -| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6} -| | ... | ${tg_to_dut1_mac} -| | Vpp All RA Suppress Link Layer | ${nodes} -| | Configure LISP GPE topology in 3-node circular topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_to_dut2_ip_static_adjacency} -| | ... | ${dut2_to_dut1_ip_static_adjacency} -| | ... | ${vni_table} | ${fib_table} diff --git a/tests/vpp/func/crypto/default/eth2p-ethip4ipsectptlispgpe-ip6basevrf-func.robot b/tests/vpp/func/crypto/default/eth2p-ethip4ipsectptlispgpe-ip6basevrf-func.robot deleted file mode 100644 index 54b6f73dd5..0000000000 --- a/tests/vpp/func/crypto/default/eth2p-ethip4ipsectptlispgpe-ip6basevrf-func.robot +++ /dev/null @@ -1,134 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.topology.Topology -| Library | resources.libraries.python.NodePath -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.L2Util -| Library | resources.libraries.python.LispUtil -| Library | resources.libraries.python.IPsecUtil -| Library | resources.libraries.python.VatJsonUtil -| Library | resources.libraries.python.IPv6Setup -| Library | resources.libraries.python.VPPUtil -| Library | String -| Resource | resources/libraries/robot/shared/traffic.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/ip/ip6.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| Resource | resources/libraries/robot/overlay/lispgpe.robot -| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot -# Import configuration and test data: -| Variables | resources/test_data/lisp/ipv6_lispgpe_ipv4/ipv6_lispgpe_ipsec_ipv4.py -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP | SKIP_VPP_PATCH -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down LISP functional test -| ... -| Documentation | *IPv6 - ip4-ipsec-lispgpe-ip6 - main fib, vrf, virt2lisp,\ -| ... | phy2lisp* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISPGPE-IPSec-IPv6-ICMP,\ -| ... | Eth-IPv4-IPSec-LISPGPE-IPv6-ICMP -| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec.\ -| ... | IPsec is in transport mode. Tests cases are for IPsec configured both\ -| ... | on RLOC interface or lisp_gpe0 interface. -| ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1 to\ -| ... | DUT2 where it is forwarded to TG(if2). -| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303. - -*** Test Cases *** -| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using physical interfaces and VRF is enabled -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2,\ -| | ... | Eth-IPv6-ICMPv6, on TG-DUTn. -| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTS. -| | ... | [Ver] Case: ip4-ipsec-lispgpe-ip6 - vrf, phy2lisp -| | ... | Make TG send ICMPv6 Echo Req between its interfaces across both\ -| | ... | DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | ... -| | [Tags] | EXPECTED_FAILING -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And Add Fib Table | ${dut1_node} | ${fib_table_1} | ip6=${TRUE} -| | And Add Fib Table | ${dut2_node} | ${fib_table_1} | ip6=${TRUE} -| | Assign Interface To Fib Table | ${dut1_node} -| | ... | ${dut1_to_tg} | ${fib_table_1} | ip6=${TRUE} -| | Assign Interface To Fib Table | ${dut2_node} -| | ... | ${dut2_to_tg} | ${fib_table_1} | ip6=${TRUE} -| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} -| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4} -| | And Configure manual keyed connection for IPSec -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} -| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} -| | Setup Topology And Lisp | ${fib_table_1} | ${dut1_dut2_vni} -| | Then Send packet and verify headers -| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers -| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -*** Keywords *** -| Setup Topology And Lisp -| | [Documentation] | Setup IPs and neighbors for interfaces on DUT1 and DUT2\ -| | ... | and then setup LISP. -| | [Arguments] | ${fib_table}=0 | ${vni_table}=0 | ${ip6}=${FALSE} -| | Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | Set interfaces in 3-node circular topology up -| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} -| | ... | ${prefix4} -| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} -| | ... | ${prefix6} -| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} -| | ... | ${prefix4} -| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} -| | ... | ${prefix6} -| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6} -| | ... | ${tg_to_dut2_mac} -| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4} -| | ... | ${dut2_to_dut1_mac} -| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4} -| | ... | ${dut1_to_dut2_mac} -| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6} -| | ... | ${tg_to_dut1_mac} -| | Vpp All RA Suppress Link Layer | ${nodes} -| | Configure LISP GPE topology in 3-node circular topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_to_dut2_ip_static_adjacency} -| | ... | ${dut2_to_dut1_ip_static_adjacency} -| | ... | ${vni_table} | ${fib_table} diff --git a/tests/vpp/func/crypto/default/eth2p-ethip6ipsectnl-ip6base-func.robot b/tests/vpp/func/crypto/default/eth2p-ethip6ipsectnl-ip6base-func.robot deleted file mode 100644 index b3a81f0653..0000000000 --- a/tests/vpp/func/crypto/default/eth2p-ethip6ipsectnl-ip6base-func.robot +++ /dev/null @@ -1,524 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/crypto/ipsec.robot -| Library | resources.libraries.python.Trace -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO -| ... | VM_ENV | HW_ENV | SKIP_VPP_PATCH -| Test Setup | Set up IPv6 IPSec functional test -| ... -| Test Teardown | Tear down IPSec functional test | ${dut_node} -| ... -| Documentation | *IPv6 IPsec tunnel mode test suite.* -| ... -| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ -| ... | between nodes. -| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure -| ... | loopback an physical interface IPv6 addresses, static ARP record, route -| ... | and IPsec manual keyed connection in tunnel mode. -| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet -| ... | is received on TG from DUT1. -| ... | *[Ref] Applicable standard specifications:* RFC4303. - -*** Variables *** -| ${tg_spi}= | ${1000} -| ${dut_spi}= | ${1001} -| ${ESP_PROTO}= | ${50} -| ${tg_if_ip6}= | 3ffe:5f::1 -| ${dut_if_ip6}= | 3ffe:5f::2 -| ${tg_lo_ip6}= | 3ffe:60::3 -| ${dut_lo_ip6}= | 3ffe:60::4 -| ${ip6_plen}= | ${64} -| ${ip6_plen_rt}= | ${128} - -*** Test Cases *** -| TC01: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC02: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA1-96 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-192 and integrity algorithm SHA1-96 in tunnel mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 192 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC03: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA1-96 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-256 and integrity algorithm SHA1-96 in tunnel mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 256 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC04: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA-256-128 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-256-128 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC05: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA-256-128 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-256-128 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ${encr_alg}= | Crypto Alg AES CBC 192 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC06: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA-256-128 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-256-128 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 256 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC07: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA-384-192 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-384-192 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 384 192 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC08: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA-384-192 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-384-192 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 192 -| | ${auth_alg}= | Integ Alg SHA 384 192 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC09: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA-384-192 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-384-192 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ${encr_alg}= | Crypto Alg AES CBC 256 -| | ${auth_alg}= | Integ Alg SHA 384 192 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC10: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA-512-256 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-512-256 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC11: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA-512-256 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-512-256 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 192 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC12: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA-512-256 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-512-256 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ${encr_alg}= | Crypto Alg AES CBC 256 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC13: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity - different encryption alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode. -| | ... | [Ver] Send an ESP packet encrypted by encryption key different from\ -| | ... | encryption key stored on VPP node from TG to VPP node and expect no\ -| | ... | response to be received on TG. -| | ... | [Ref] RFC4303. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC14: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity - different integrity alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode. -| | ... | [Ver] Send an ESP packet authenticated by integrity key different\ -| | ... | from integrity key stored on VPP node from TG to VPP node and expect\ -| | ... | no response to be received on TG. -| | ... | [Ref] RFC4303. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC15: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity - different encryption and integrity alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode. -| | ... | [Ver] Send an ESP packet authenticated by integrity key and encrypted\ -| | ... | by encryption key different from integrity and encryption keys stored\ -| | ... | on VPP node from TG to VPP node and expect no response to be received\ -| | ... | on TG. -| | ... | [Ref] RFC4303. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto -| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC16: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel\ -| | ... | mode. Then update SA keys - use new keys. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node before\ -| | ... | and after SA keys update. -| | [Tags] | EXPECTED_FAILING -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} -| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto -| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ -| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} -| | ... | ${new_encr_key} | ${new_auth_key} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${new_encr_key} | ${auth_alg} | ${new_auth_key} -| | ... | ${tg_spi} | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC17: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different encryption alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel -| | ... | mode. Then update SA keys - use new keys. -| | ... | [Ver] Send an ESP packet encrypted by encryption key different from\ -| | ... | encryption key stored on VPP node from TG to VPP node and expect no\ -| | ... | response to be received on TG before and after SA keys update. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE} -| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} -| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto -| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ -| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} -| | ... | ${new_encr_key} | ${new_auth_key} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${new_auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC18: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different integrity alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel\ -| | ... | mode. Then update SA keys - use new keys. -| | ... | [Ver] Send an ESP packet authenticated by integrity key different\ -| | ... | from integrity key stored on VPP node from TG to VPP node and expect\ -| | ... | no response to be received on TG before and after SA keys update. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE} -| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} -| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto -| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ -| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} -| | ... | ${new_encr_key} | ${new_auth_key} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${new_encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC19: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different encryption and integrity alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel\ -| | ... | mode. Then update SA keys - use new keys. -| | ... | [Ver] Send an ESP packet authenticated by integrity key and encrypted\ -| | ... | by encryption key different from integrity and encryption keys stored\ -| | ... | on VPP node from TG to VPP node and expect no response to be received\ -| | ... | on TG before and after SA keys update. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE} -| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto -| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} -| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto -| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ -| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} -| | ... | ${new_encr_key} | ${new_auth_key} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -*** Keywords *** -| Get Second Random String -| | [Arguments] | ${req_alg} | ${req_type} -| | ${req_key_len}= | Run Keyword | Get ${req_type} Alg Key Len | ${req_alg} -| | ${key}= | Set Variable If | '${req_type}' == 'Crypto' | ${encr_key} -| | ... | '${req_type}' == 'Integ' | ${auth_key} -| | :FOR | ${index} | IN RANGE | 100 -| | | ${req_key}= | Generate Random String | ${req_key_len} -| | | Return From Keyword If | '${req_key}' != '${key}' | ${req_key} diff --git a/tests/vpp/func/crypto/default/eth2p-ethip6ipsectpt-ip6base-func.robot b/tests/vpp/func/crypto/default/eth2p-ethip6ipsectpt-ip6base-func.robot deleted file mode 100644 index 276732f077..0000000000 --- a/tests/vpp/func/crypto/default/eth2p-ethip6ipsectpt-ip6base-func.robot +++ /dev/null @@ -1,507 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/crypto/ipsec.robot -| Library | resources.libraries.python.Trace -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO -| ... | VM_ENV | HW_ENV | SKIP_VPP_PATCH -| Test Setup | Set up IPv6 IPSec functional test -| ... -| Test Teardown | Tear down IPSec functional test | ${dut_node} -| ... -| Documentation | *IPv6 IPsec transport mode test suite.* -| ... -| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ -| ... | between nodes. -| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure -| ... | loopback an physical interface IPv6 addresses, static ARP record, route -| ... | and IPsec manual keyed connection in transport mode. -| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet -| ... | is received on TG from DUT1. -| ... | *[Ref] Applicable standard specifications:* RFC4303. - -*** Variables *** -| ${tg_spi}= | ${1000} -| ${dut_spi}= | ${1001} -| ${ESP_PROTO}= | ${50} -| ${tg_if_ip6}= | 3ffe:5f::1 -| ${dut_if_ip6}= | 3ffe:5f::2 -| ${tg_lo_ip6}= | 3ffe:60::3 -| ${dut_lo_ip6}= | 3ffe:60::4 -| ${ip6_plen}= | ${64} -| ${ip6_plen_rt}= | ${128} - -*** Test Cases *** -| TC01: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | ... | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC02: VPP process ESP packet in Transport Mode with AES-CBC-192 encryption and SHA1-96 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-192 and integrity algorithm SHA1-96 in transport -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 192 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | ... | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC03: VPP process ESP packet in Transport Mode with AES-CBC-256 encryption and SHA1-96 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-256 and integrity algorithm SHA1-96 in transport -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 256 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | ... | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC04: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA-256-128 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-256-128 in transport -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | ... | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC05: VPP process ESP packet in Transport Mode with AES-CBC-192 encryption and SHA-256-128 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-256-128 in transport -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ${encr_alg}= | Crypto Alg AES CBC 192 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | ... | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC06: VPP process ESP packet in Transport Mode with AES-CBC-256 encryption and SHA-256-128 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-256-128 in transport -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 256 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | ... | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC07: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA-384-192 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-384-192 in transport -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 384 192 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | ... | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC08: VPP process ESP packet in Transport Mode with AES-CBC-192 encryption and SHA-384-192 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-384-192 in transport -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 192 -| | ${auth_alg}= | Integ Alg SHA 384 192 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | ... | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC09: VPP process ESP packet in Transport Mode with AES-CBC-256 encryption and SHA-384-192 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-384-192 in transport -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ${encr_alg}= | Crypto Alg AES CBC 256 -| | ${auth_alg}= | Integ Alg SHA 384 192 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | ... | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC10: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA-512-256 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-512-256 in transport -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | ... | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC11: VPP process ESP packet in Transport Mode with AES-CBC-192 encryption and SHA-512-256 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-512-256 in transport -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | [Tags] | SKIP_PATCH -| | ${encr_alg}= | Crypto Alg AES CBC 192 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | ... | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC12: VPP process ESP packet in Transport Mode with AES-CBC-256 encryption and SHA-512-256 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-512-256 in transport -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ${encr_alg}= | Crypto Alg AES CBC 256 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | ... | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC13: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity - different encryption alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\ -| | ... | mode. -| | ... | [Ver] Send an ESP packet encrypted by encryption key different from\ -| | ... | encryption key stored on VPP node from TG to VPP node and expect no\ -| | ... | response to be received on TG. -| | ... | [Ref] RFC4303. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | ... | is_ipv6=${TRUE} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC14: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity - different integrity alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\ -| | ... | mode. -| | ... | [Ver] Send an ESP packet authenticated by integrity key different\ -| | ... | from integrity key stored on VPP node from TG to VPP node and expect\ -| | ... | no response to be received on TG. -| | ... | [Ref] RFC4303. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | ... | is_ipv6=${TRUE} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC15: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity - different encryption and integrity alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\ -| | ... | mode. -| | ... | [Ver] Send an ESP packet authenticated by integrity key and encrypted\ -| | ... | by encryption key different from integrity and encryption keys stored\ -| | ... | on VPP node from TG to VPP node and expect no response to be received\ -| | ... | on TG. -| | ... | [Ref] RFC4303. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto -| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | ... | is_ipv6=${TRUE} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC16: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\ -| | ... | mode. Then update SA keys - use new keys. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node before\ -| | ... | and after SA keys update. -| | [Tags] | EXPECTED_FAILING -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | ... | is_ipv6=${TRUE} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} -| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto -| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ -| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} -| | ... | ${new_encr_key} | ${new_auth_key} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${new_encr_key} | ${auth_alg} | ${new_auth_key} -| | ... | ${tg_spi} | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC17: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different encryption alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\ -| | ... | mode. Then update SA keys - use new keys. -| | ... | [Ver] Send an ESP packet encrypted by encryption key different from\ -| | ... | encryption key stored on VPP node from TG to VPP node and expect no\ -| | ... | response to be received on TG before and after SA keys update. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | ... | is_ipv6=${TRUE} -| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} -| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto -| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ -| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} -| | ... | ${new_encr_key} | ${new_auth_key} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${new_auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC18: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different integrity alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\ -| | ... | mode. Then update SA keys - use new keys. -| | ... | [Ver] Send an ESP packet authenticated by integrity key different\ -| | ... | from integrity key stored on VPP node from TG to VPP node and expect\ -| | ... | no response to be received on TG before and after SA keys update. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | ... | is_ipv6=${TRUE} -| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} -| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto -| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ -| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} -| | ... | ${new_encr_key} | ${new_auth_key} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${new_encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -| TC19: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different encryption and integrity alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\ -| | ... | mode. Then update SA keys - use new keys. -| | ... | [Ver] Send an ESP packet authenticated by integrity key and encrypted\ -| | ... | by encryption key different from integrity and encryption keys stored\ -| | ... | on VPP node from TG to VPP node and expect no response to be received\ -| | ... | on TG before and after SA keys update. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} -| | ... | is_ipv6=${TRUE} -| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto -| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} -| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto -| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ -| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} -| | ... | ${new_encr_key} | ${new_auth_key} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} - -*** Keywords *** -| Get Second Random String -| | [Arguments] | ${req_alg} | ${req_type} -| | ${req_key_len}= | Run Keyword | Get ${req_type} Alg Key Len | ${req_alg} -| | ${key}= | Set Variable If | '${req_type}' == 'Crypto' | ${encr_key} -| | ... | '${req_type}' == 'Integ' | ${auth_key} -| | :FOR | ${index} | IN RANGE | 100 -| | | ${req_key}= | Generate Random String | ${req_key_len} -| | | Return From Keyword If | '${req_key}' != '${key}' | ${req_key} diff --git a/tests/vpp/func/crypto/default/eth2p-ethip6ipsectptlispgpe-ip4base-func.robot b/tests/vpp/func/crypto/default/eth2p-ethip6ipsectptlispgpe-ip4base-func.robot deleted file mode 100644 index 725db216e4..0000000000 --- a/tests/vpp/func/crypto/default/eth2p-ethip6ipsectptlispgpe-ip4base-func.robot +++ /dev/null @@ -1,155 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.topology.Topology -| Library | resources.libraries.python.NodePath -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.L2Util -| Library | resources.libraries.python.LispUtil -| Library | resources.libraries.python.IPsecUtil -| Library | resources.libraries.python.VatJsonUtil -| Library | resources.libraries.python.IPv6Setup -| Library | String -| Resource | resources/libraries/robot/shared/traffic.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/ip/ip6.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| Resource | resources/libraries/robot/overlay/lispgpe.robot -| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot -# Import configuration and test data: -| Variables | resources/test_data/lisp/ipv4_lispgpe_ipv6/ipv4_lispgpe_ipsec_ipv6.py -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP | SKIP_VPP_PATCH -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *IPv6 - ip4-ipsec-lispgpe-ip6 - main fib, virt2lisp, phy2lisp* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISPGPE-IPSec-IPv4-ICMP,\ -| ... | Eth-IPv6-IPSec-LISPGPE-IPv4-ICMP -| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec.\ -| ... | IPsec is in transport mode. Tests cases are for IPsec configured both\ -| ... | on RLOC interface or lisp_gpe0 interface. -| ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1 to\ -| ... | DUT2 where it is forwarded to TG(if2). -| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303. - -*** Test Cases *** -| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on RLOC Int. -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv6-LISPGPE-IPSec-IPv4-ICMP on DUT1-DUT2, Eth-IPv4-ICMP\ -| | ... | on TG-DUTn. -| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTS. -| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across\ -| | ... | both DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Setup Topology And Lisp -| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} -| | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6} -| | And Configure manual keyed connection for IPSec -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} -| | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6} -| | Then Send packet and verify headers -| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers -| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -| TC02: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int. -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv6-IPSec-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMP\ -| | ... | on TG-DUTn. -| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTS. -| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across\ -| | ... | both DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Setup Topology And Lisp -| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | ${lisp_if_idx}= | resources.libraries.python.InterfaceUtil.get sw if index -| | ... | ${dut1_node} | ${lisp_gpe_int} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut1_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} -| | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6} -| | And Configure manual keyed connection for IPSec -| | ... | ${dut2_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} -| | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6} -| | Then Send packet and verify headers -| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers -| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -*** Keywords *** -| Setup Topology And Lisp -| | [Documentation] | Setup IPs and neighbors for interfaces on DUT1 and DUT2\ -| | ... | and then setup LISP. -| | Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | Set interfaces in 3-node circular topology up -| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} -| | ... | ${prefix6} -| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} -| | ... | ${prefix6} -| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} -| | ... | ${prefix4} -| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} -| | ... | ${prefix6} -| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} -| | ... | ${prefix4} -| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4} -| | ... | ${tg_to_dut2_mac} -| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_dut1_mac} -| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6} -| | ... | ${dut1_to_dut2_mac} -| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4} -| | ... | ${tg_to_dut1_mac} -| | Vpp All RA Suppress Link Layer | ${nodes} -| | Configure LISP GPE topology in 3-node circular topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} -| | ... | ${dut1_to_dut2_ip_static_adjacency} -| | ... | ${dut2_to_dut1_ip_static_adjacency} diff --git a/tests/vpp/func/crypto/default/eth2p-ethip6ipsectptlispgpe-ip6base-func.robot b/tests/vpp/func/crypto/default/eth2p-ethip6ipsectptlispgpe-ip6base-func.robot deleted file mode 100644 index b0454dd717..0000000000 --- a/tests/vpp/func/crypto/default/eth2p-ethip6ipsectptlispgpe-ip6base-func.robot +++ /dev/null @@ -1,171 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.topology.Topology -| Library | resources.libraries.python.NodePath -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.L2Util -| Library | resources.libraries.python.LispUtil -| Library | resources.libraries.python.VPPUtil -| Library | resources.libraries.python.IPsecUtil -| Library | resources.libraries.python.VatJsonUtil -| Library | resources.libraries.python.IPv6Setup -| Library | String -| Resource | resources/libraries/robot/shared/traffic.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/ip/ip6.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| Resource | resources/libraries/robot/overlay/lispgpe.robot -| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot -# Import configuration and test data: -| Variables | resources/test_data/lisp/ipv6_lispgpe_ipv6/ipv6_lispgpe_ipsec_ipv6.py -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP | SKIP_VPP_PATCH -| ... -| Test Setup | Run Keywords | Set up functional test -| ... | AND | Vpp All Ra Suppress Link Layer | ${nodes} -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *IPv6 - ip6-ipsec-lispgpe-ip6 - main fib, -| ... | vrf (gpe_vni-to-vrf), phy2lisp, virt2lisp* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-IPSec-LISPGPE-IPv6-ICMPv6,\ -| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec.\ -| ... | IPsec is in transport mode. Tests cases are for IPsec configured both\ -| ... | on RLOC interface or lisp_gpe0 interface. -| ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1\ -| ... | to DUT2 where it is forwarded to TG(if2). -| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303. - -*** Variables *** -| ${dut2_spi}= | ${1000} -| ${dut1_spi}= | ${1001} - -| ${ESP_PROTO}= | ${50} - -| ${bid}= | 10 - -*** Test Cases *** -| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using IPsec (transport) on RLOC Int. -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv6-IPSec-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2,\ -| | ... | Eth-IPv6-ICMPv6 on TG-DUTn. -| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTS. -| | ... | [Ver] Case: ip6-lispgpe-ipsec-ip6 - main fib, phys2lisp\ -| | ... | Make TG send ICMPv6 Echo Req between its interfaces across\ -| | ... | both DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Setup Topology -| | And Configure LISP GPE topology in 3-node circular topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_to_dut2_ip6_static_adjacency} -| | ... | ${dut2_to_dut1_ip6_static_adjacency} -| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} -| | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6} -| | And Configure manual keyed connection for IPSec -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} -| | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6} -| | Then Send packet and verify headers -| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers -| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -| TC02: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using IPsec (transport) lisp_gpe0 Int. -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv6-IPSec-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2,\ -| | ... | Eth-IPv6-ICMPv6 on TG-DUTn. -| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTS. -| | ... | [Ver] Case: ip6-ipsec-lispgpe-ip6 - main fib, phys2lisp\ -| | ... | Make TG send ICMPv6 Echo Req between its interfaces across\ -| | ... | both DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Setup Topology -| | And Configure LISP GPE topology in 3-node circular topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_to_dut2_ip6_static_adjacency} -| | ... | ${dut2_to_dut1_ip6_static_adjacency} -| | ${lisp_if_idx}= | resources.libraries.python.InterfaceUtil.get sw if index -| | ... | ${dut1_node} | lisp_gpe0 -| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut1_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} | ${tg1_ip6} -| | ... | ${tg2_ip6} -| | And Configure manual keyed connection for IPSec -| | ... | ${dut2_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} | ${tg2_ip6} -| | ... | ${tg1_ip6} -| | Then Send packet and verify headers -| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers -| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -*** Keywords *** -| Setup Topology -| | Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | Set interfaces in 3-node circular topology up -| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} -| | ... | ${prefix6} -| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} -| | ... | ${prefix6} -| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} -| | ... | ${prefix6} -| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} -| | ... | ${prefix6} -| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} -| | ... | ${prefix6} -| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6} -| | ... | ${tg_to_dut1_mac} -| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6} -| | ... | ${tg_to_dut2_mac} -| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_dut1_mac} -| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6} -| | ... | ${dut1_to_dut2_mac} -| | Vpp All RA Suppress Link Layer | ${nodes} |