diff options
Diffstat (limited to 'tests/vpp/func/crypto/sw_device/eth2p-ethip4ipsectnlsw-ip4base-func.robot')
| -rw-r--r-- | tests/vpp/func/crypto/sw_device/eth2p-ethip4ipsectnlsw-ip4base-func.robot | 560 |
1 files changed, 0 insertions, 560 deletions
diff --git a/tests/vpp/func/crypto/sw_device/eth2p-ethip4ipsectnlsw-ip4base-func.robot b/tests/vpp/func/crypto/sw_device/eth2p-ethip4ipsectnlsw-ip4base-func.robot deleted file mode 100644 index 7f6207e3db..0000000000 --- a/tests/vpp/func/crypto/sw_device/eth2p-ethip4ipsectnlsw-ip4base-func.robot +++ /dev/null @@ -1,560 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/crypto/ipsec.robot -| Library | resources.libraries.python.Trace -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO -| ... | VM_ENV | HW_ENV | IPSEC | IPSEC_SW -| ... -| Test Setup | Set up IPSec SW device functional test | IPv4 -| ... -| Test Teardown | Tear down IPSec SW device functional test -| ... -| Documentation | *IPv4 SW cryptodev IPsec tunnel mode test suite.* -| ... -| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ -| ... | between nodes. -| ... | *[Cfg] DUT configuration:* With enabled SW crytodev on DUT1 create\ -| ... | loopback interface, configure loopback and physical interface IPv4\ -| ... | addresses, static ARP record, route and IPsec manual keyed connection\ -| ... | in tunnel mode. -| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet\ -| ... | is received on TG from DUT1. -| ... | *[Ref] Applicable standard specifications:* RFC4303. - -*** Variables *** -| ${tg_spi}= | ${1000} -| ${dut_spi}= | ${1001} -| ${ESP_PROTO}= | ${50} -| ${tg_if_ip4}= | 192.168.100.2 -| ${dut_if_ip4}= | 192.168.100.3 -| ${tg_lo_ip4}= | 192.168.3.3 -| ${dut_lo_ip4}= | 192.168.4.4 -| ${ip4_plen}= | ${24} - -*** Test Cases *** -| TC01: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC02: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA1-96 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-192 and integrity algorithm SHA1-96 in tunnel mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ... -| | [Tags] | SKIP_PATCH -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 192 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC03: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA1-96 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-256 and integrity algorithm SHA1-96 in tunnel mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ... -| | [Tags] | SKIP_PATCH -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 256 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC04: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA-256-128 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-256-128 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ... -| | [Tags] | SKIP_PATCH -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC05: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA-256-128 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-256-128 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 192 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC06: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA-256-128 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-256-128 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ... -| | [Tags] | SKIP_PATCH -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 256 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC07: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA-384-192 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-384-192 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ... -| | [Tags] | SKIP_PATCH -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 384 192 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC08: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA-384-192 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-384-192 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ... -| | [Tags] | SKIP_PATCH -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 192 -| | ${auth_alg}= | Integ Alg SHA 384 192 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC09: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA-384-192 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-384-192 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 256 -| | ${auth_alg}= | Integ Alg SHA 384 192 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC10: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA-512-256 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-512-256 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ... -| | [Tags] | SKIP_PATCH -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC11: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA-512-256 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-512-256 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ... -| | [Tags] | SKIP_PATCH -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 192 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC12: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA-512-256 integrity -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-512-256 in tunnel\ -| | ... | mode. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 256 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC13: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity - different encryption alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode. -| | ... | [Ver] Send an ESP packet encrypted by encryption key different from\ -| | ... | encryption key stored on VPP node from TG to VPP node and expect no\ -| | ... | response to be received on TG. -| | ... | [Ref] RFC4303. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC14: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity - different integrity alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode. -| | ... | [Ver] Send an ESP packet authenticated by integrity key different\ -| | ... | from integrity key stored on VPP node from TG to VPP node and expect\ -| | ... | no response to be received on TG. -| | ... | [Ref] RFC4303. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC15: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity - different encryption and integrity alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode. -| | ... | [Ver] Send an ESP packet authenticated by integrity key and encrypted\ -| | ... | by encryption key different from integrity and encryption keys stored\ -| | ... | on VPP node from TG to VPP node and expect no response to be received\ -| | ... | on TG. -| | ... | [Ref] RFC4303. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto -| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC16: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel\ -| | ... | mode. Then update SA keys - use new keys. -| | ... | [Ver] Send and receive ESP packet between TG and VPP node before\ -| | ... | and after SA keys update. -| | ... -| | [Tags] | EXPECTED_FAILING -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} -| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto -| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ -| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} -| | ... | ${new_encr_key} | ${new_auth_key} -| | Then Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${new_encr_key} | ${auth_alg} | ${new_auth_key} -| | ... | ${tg_spi} | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC17: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different encryption alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel -| | ... | mode. Then update SA keys - use new keys. -| | ... | [Ver] Send an ESP packet encrypted by encryption key different from\ -| | ... | encryption key stored on VPP node from TG to VPP node and expect no\ -| | ... | response to be received on TG before and after SA keys update. -| | ... -| | [Tags] | EXPECTED_FAILING -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} -| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto -| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ -| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} -| | ... | ${new_encr_key} | ${new_auth_key} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${new_auth_key} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC18: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different integrity alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel\ -| | ... | mode. Then update SA keys - use new keys. -| | ... | [Ver] Send an ESP packet authenticated by integrity key different\ -| | ... | from integrity key stored on VPP node from TG to VPP node and expect\ -| | ... | no response to be received on TG before and after SA keys update. -| | ... -| | [Tags] | EXPECTED_FAILING -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} -| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto -| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ -| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} -| | ... | ${new_encr_key} | ${new_auth_key} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${new_encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -| TC19: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different encryption and integrity alogrithms used -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC4303. -| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ -| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel\ -| | ... | mode. Then update SA keys - use new keys. -| | ... | [Ver] Send an ESP packet authenticated by integrity key and encrypted\ -| | ... | by encryption key different from integrity and encryption keys stored\ -| | ... | on VPP node from TG to VPP node and expect no response to be received\ -| | ... | on TG before and after SA keys update. -| | ... -| | [Tags] | EXPECTED_FAILING -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} -| | ... | ${dut_tun_ip} | ${tg_tun_ip} -| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto -| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} -| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto -| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ -| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} -| | ... | ${new_encr_key} | ${new_auth_key} -| | Then Run Keyword And Expect Error | ESP packet Rx timeout -| | ... | Send IPsec Packet and verify ESP encapsulation in received packet -| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} -| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} -| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} -| | ... | ${dut_tun_ip} - -*** Keywords *** -| Get Second Random String -| | [Arguments] | ${req_alg} | ${req_type} -| | ... -| | ${req_key_len}= | Run Keyword | Get ${req_type} Alg Key Len | ${req_alg} -| | ${key}= | Set Variable If | '${req_type}' == 'Crypto' | ${encr_key} -| | ... | '${req_type}' == 'Integ' | ${auth_key} -| | :FOR | ${index} | IN RANGE | 100 -| | | ${req_key}= | Generate Random String | ${req_key_len} -| | | Return From Keyword If | '${req_key}' != '${key}' | ${req_key} |