diff options
Diffstat (limited to 'tests/vpp/func/crypto')
9 files changed, 2914 insertions, 0 deletions
diff --git a/tests/vpp/func/crypto/eth2p-ethip4ipsectnl-ip4base-func.robot b/tests/vpp/func/crypto/eth2p-ethip4ipsectnl-ip4base-func.robot new file mode 100644 index 0000000000..814d8ee45c --- /dev/null +++ b/tests/vpp/func/crypto/eth2p-ethip4ipsectnl-ip4base-func.robot @@ -0,0 +1,523 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/crypto/ipsec.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO +| ... | VM_ENV | HW_ENV | SKIP_VPP_PATCH +| ... +| Test Setup | Set up IPv4 IPSec functional test +| ... +| Test Teardown | Tear down IPSec functional test | ${dut_node} +| ... +| Documentation | *IPv4 IPsec tunnel mode test suite.* +| ... +| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ +| ... | between nodes. +| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure\ +| ... | loopback an physical interface IPv4 addresses, static ARP record, route\ +| ... | and IPsec manual keyed connection in tunnel mode. +| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet\ +| ... | is received on TG from DUT1. +| ... | *[Ref] Applicable standard specifications:* RFC4303. + +*** Variables *** +| ${tg_spi}= | ${1000} +| ${dut_spi}= | ${1001} +| ${ESP_PROTO}= | ${50} +| ${tg_if_ip4}= | 192.168.100.2 +| ${dut_if_ip4}= | 192.168.100.3 +| ${tg_lo_ip4}= | 192.168.3.3 +| ${dut_lo_ip4}= | 192.168.4.4 +| ${ip4_plen}= | ${24} + +*** Test Cases *** +| TC01: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC02: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA1-96 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-192 and integrity algorithm SHA1-96 in tunnel mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 192 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC03: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA1-96 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-256 and integrity algorithm SHA1-96 in tunnel mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 256 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC04: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA-256-128 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-256-128 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC05: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA-256-128 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-256-128 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | ${encr_alg}= | Crypto Alg AES CBC 192 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC06: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA-256-128 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-256-128 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 256 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC07: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA-384-192 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-384-192 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 384 192 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC08: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA-384-192 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-384-192 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 192 +| | ${auth_alg}= | Integ Alg SHA 384 192 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC09: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA-384-192 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-384-192 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | ${encr_alg}= | Crypto Alg AES CBC 256 +| | ${auth_alg}= | Integ Alg SHA 384 192 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC10: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA-512-256 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-512-256 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC11: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA-512-256 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-512-256 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 192 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC12: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA-512-256 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-512-256 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | ${encr_alg}= | Crypto Alg AES CBC 256 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC13: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity - different encryption alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode. +| | ... | [Ver] Send an ESP packet encrypted by encryption key different from\ +| | ... | encryption key stored on VPP node from TG to VPP node and expect no\ +| | ... | response to be received on TG. +| | ... | [Ref] RFC4303. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC14: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity - different integrity alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode. +| | ... | [Ver] Send an ESP packet authenticated by integrity key different\ +| | ... | from integrity key stored on VPP node from TG to VPP node and expect\ +| | ... | no response to be received on TG. +| | ... | [Ref] RFC4303. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC15: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity - different encryption and integrity alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode. +| | ... | [Ver] Send an ESP packet authenticated by integrity key and encrypted\ +| | ... | by encryption key different from integrity and encryption keys stored\ +| | ... | on VPP node from TG to VPP node and expect no response to be received\ +| | ... | on TG. +| | ... | [Ref] RFC4303. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto +| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC16: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel\ +| | ... | mode. Then update SA keys - use new keys. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node before\ +| | ... | and after SA keys update. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} +| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto +| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ +| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} +| | ... | ${new_encr_key} | ${new_auth_key} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${new_encr_key} | ${auth_alg} | ${new_auth_key} +| | ... | ${tg_spi} | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC17: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different encryption alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel +| | ... | mode. Then update SA keys - use new keys. +| | ... | [Ver] Send an ESP packet encrypted by encryption key different from\ +| | ... | encryption key stored on VPP node from TG to VPP node and expect no\ +| | ... | response to be received on TG before and after SA keys update. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} +| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto +| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ +| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} +| | ... | ${new_encr_key} | ${new_auth_key} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${new_auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC18: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different integrity alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel\ +| | ... | mode. Then update SA keys - use new keys. +| | ... | [Ver] Send an ESP packet authenticated by integrity key different\ +| | ... | from integrity key stored on VPP node from TG to VPP node and expect\ +| | ... | no response to be received on TG before and after SA keys update. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} +| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto +| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ +| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} +| | ... | ${new_encr_key} | ${new_auth_key} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${new_encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC19: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different encryption and integrity alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel\ +| | ... | mode. Then update SA keys - use new keys. +| | ... | [Ver] Send an ESP packet authenticated by integrity key and encrypted\ +| | ... | by encryption key different from integrity and encryption keys stored\ +| | ... | on VPP node from TG to VPP node and expect no response to be received\ +| | ... | on TG before and after SA keys update. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto +| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} +| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto +| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ +| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} +| | ... | ${new_encr_key} | ${new_auth_key} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +*** Keywords *** +| Get Second Random String +| | [Arguments] | ${req_alg} | ${req_type} +| | ${req_key_len}= | Run Keyword | Get ${req_type} Alg Key Len | ${req_alg} +| | ${key}= | Set Variable If | '${req_type}' == 'Crypto' | ${encr_key} +| | ... | '${req_type}' == 'Integ' | ${auth_key} +| | :FOR | ${index} | IN RANGE | 100 +| | | ${req_key}= | Generate Random String | ${req_key_len} +| | | Return From Keyword If | '${req_key}' != '${key}' | ${req_key} diff --git a/tests/vpp/func/crypto/eth2p-ethip4ipsectpt-ip4base-func.robot b/tests/vpp/func/crypto/eth2p-ethip4ipsectpt-ip4base-func.robot new file mode 100644 index 0000000000..e599cf9506 --- /dev/null +++ b/tests/vpp/func/crypto/eth2p-ethip4ipsectpt-ip4base-func.robot @@ -0,0 +1,487 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/crypto/ipsec.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO +| ... | VM_ENV | HW_ENV | SKIP_VPP_PATCH +| Test Setup | Set up IPv4 IPSec functional test +| ... +| Test Teardown | Tear down IPSec functional test | ${dut_node} +| ... +| Documentation | *IPv4 IPsec transport mode test suite.* +| ... +| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ +| ... | between nodes. +| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure\ +| ... | loopback an physical interface IPv4 addresses, static ARP record, route\ +| ... | and IPsec manual keyed connection in transport mode. +| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet\ +| ... | is received on TG from DUT1. +| ... | *[Ref] Applicable standard specifications:* RFC4303. + +*** Variables *** +| ${tg_spi}= | ${1000} +| ${dut_spi}= | ${1001} +| ${ESP_PROTO}= | ${50} +| ${tg_if_ip4}= | 192.168.100.2 +| ${dut_if_ip4}= | 192.168.100.3 +| ${tg_lo_ip4}= | 192.168.3.3 +| ${dut_lo_ip4}= | 192.168.4.4 +| ${ip4_plen}= | ${24} + +*** Test Cases *** +| TC01: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC02: VPP process ESP packet in Transport Mode with AES-CBC-192 encryption and SHA1-96 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-192 and integrity algorithm SHA1-96 in transport +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 192 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC03: VPP process ESP packet in Transport Mode with AES-CBC-256 encryption and SHA1-96 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-256 and integrity algorithm SHA1-96 in transport +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 256 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC04: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA-256-128 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-256-128 in transport +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC05: VPP process ESP packet in Transport Mode with AES-CBC-192 encryption and SHA-256-128 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-256-128 in transport +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | ${encr_alg}= | Crypto Alg AES CBC 192 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC06: VPP process ESP packet in Transport Mode with AES-CBC-256 encryption and SHA-256-128 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-256-128 in transport +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 256 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC07: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA-384-192 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-384-192 in transport +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 384 192 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC08: VPP process ESP packet in Transport Mode with AES-CBC-192 encryption and SHA-384-192 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-384-192 in transport +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 192 +| | ${auth_alg}= | Integ Alg SHA 384 192 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC09: VPP process ESP packet in Transport Mode with AES-CBC-256 encryption and SHA-384-192 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-384-192 in transport +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | ${encr_alg}= | Crypto Alg AES CBC 256 +| | ${auth_alg}= | Integ Alg SHA 384 192 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC10: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA-512-256 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-512-256 in transport +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC11: VPP process ESP packet in Transport Mode with AES-CBC-192 encryption and SHA-512-256 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-512-256 in transport +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 192 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC12: VPP process ESP packet in Transport Mode with AES-CBC-256 encryption and SHA-512-256 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-512-256 in transport +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | ${encr_alg}= | Crypto Alg AES CBC 256 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + + +| TC13: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity - different encryption alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\ +| | ... | mode. +| | ... | [Ver] Send an ESP packet encrypted by encryption key different from\ +| | ... | encryption key stored on VPP node from TG to VPP node and expect no\ +| | ... | response to be received on TG. +| | ... | [Ref] RFC4303. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC14: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity - different integrity alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\ +| | ... | mode. +| | ... | [Ver] Send an ESP packet authenticated by integrity key different\ +| | ... | from integrity key stored on VPP node from TG to VPP node and expect\ +| | ... | no response to be received on TG. +| | ... | [Ref] RFC4303. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC15: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity - different encryption and integrity alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\ +| | ... | mode. +| | ... | [Ver] Send an ESP packet authenticated by integrity key and encrypted\ +| | ... | by encryption key different from integrity and encryption keys stored\ +| | ... | on VPP node from TG to VPP node and expect no response to be received\ +| | ... | on TG. +| | ... | [Ref] RFC4303. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto +| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC16: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\ +| | ... | mode. Then update SA keys - use new keys. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node before\ +| | ... | and after SA keys update. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} +| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto +| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ +| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} +| | ... | ${new_encr_key} | ${new_auth_key} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${new_encr_key} | ${auth_alg} | ${new_auth_key} +| | ... | ${tg_spi} | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC17: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different encryption alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\ +| | ... | mode. Then update SA keys - use new keys. +| | ... | [Ver] Send an ESP packet encrypted by encryption key different from\ +| | ... | encryption key stored on VPP node from TG to VPP node and expect no\ +| | ... | response to be received on TG before and after SA keys update. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} +| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto +| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ +| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} +| | ... | ${new_encr_key} | ${new_auth_key} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${new_auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC18: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different integrity alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\ +| | ... | mode. Then update SA keys - use new keys. +| | ... | [Ver] Send an ESP packet authenticated by integrity key different\ +| | ... | from integrity key stored on VPP node from TG to VPP node and expect\ +| | ... | no response to be received on TG before and after SA keys update. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} +| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto +| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ +| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} +| | ... | ${new_encr_key} | ${new_auth_key} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${new_encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC19: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different encryption and integrity alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\ +| | ... | mode. Then update SA keys - use new keys. +| | ... | [Ver] Send an ESP packet authenticated by integrity key and encrypted\ +| | ... | by encryption key different from integrity and encryption keys stored\ +| | ... | on VPP node from TG to VPP node and expect no response to be received\ +| | ... | on TG before and after SA keys update. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto +| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} +| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto +| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ +| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} +| | ... | ${new_encr_key} | ${new_auth_key} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +*** Keywords *** +| Get Second Random String +| | [Arguments] | ${req_alg} | ${req_type} +| | ${req_key_len}= | Run Keyword | Get ${req_type} Alg Key Len | ${req_alg} +| | ${key}= | Set Variable If | '${req_type}' == 'Crypto' | ${encr_key} +| | ... | '${req_type}' == 'Integ' | ${auth_key} +| | :FOR | ${index} | IN RANGE | 100 +| | | ${req_key}= | Generate Random String | ${req_key_len} +| | | Return From Keyword If | '${req_key}' != '${key}' | ${req_key} diff --git a/tests/vpp/func/crypto/eth2p-ethip4ipsectptlispgpe-ip4base-func.robot b/tests/vpp/func/crypto/eth2p-ethip4ipsectptlispgpe-ip4base-func.robot new file mode 100644 index 0000000000..c77fb69c5c --- /dev/null +++ b/tests/vpp/func/crypto/eth2p-ethip4ipsectptlispgpe-ip4base-func.robot @@ -0,0 +1,269 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.LispUtil +| Library | resources.libraries.python.VhostUser +| Library | resources.libraries.python.QemuUtils +| Library | resources.libraries.python.VPPUtil +| Library | resources.libraries.python.IPsecUtil +| Resource | resources/libraries/robot/shared/traffic.robot +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/shared/interfaces.robot +| Resource | resources/libraries/robot/shared/testing_path.robot +| Resource | resources/libraries/robot/vrf.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| Resource | resources/libraries/robot/vm/qemu.robot +| Resource | resources/libraries/robot/overlay/lispgpe.robot +| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot +| Resource | resources/libraries/robot/overlay/l2lisp.robot +# Import configuration and test data: +| Variables | resources/test_data/lisp/ipv4_ipsec_lispgpe_ipv4/ipv4_ipsec_lispgpe_ipv4.py +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP | SKIP_VPP_PATCH +| ... +| Test Setup | Set up functional test +| ... +| Test Teardown | Tear down LISP functional test +| ... +| Documentation | *IPv4-ip4-ipsec-lispgpe-ip4 - main fib, vrf (gpe_vni-to-vrf)* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* ICMPv4-IPv4-IPSec-LISPGPE-IPv4-ICMPv4. +| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec.\ +| ... | IPsec is in transport mode. Tests cases are for IPsec configured both\ +| ... | on RLOC interface or lisp_gpe0 interface. +| ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1 to\ +| ... | DUT2 where it is forwarded to TG(if2). +| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303. + +*** Variables *** +| ${dut2_spi}= | ${1000} +| ${dut1_spi}= | ${1001} + +| ${ESP_PROTO}= | ${50} + +| ${bid}= | 10 + +*** Test Cases *** +| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on RLOC Int. +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2,\ +| | ... | Eth-IPv4-ICMPv4 on TG-DUTn. +| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\ +| | ... | IPsec in between DUTs. +| | ... | [Ver] Case: ip4-lispgpe-ipsec-ip4 - main fib +| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\ +| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830, RFC4303. +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Setup 3-node Topology +| | And Add IP Neighbors +| | And Configure LISP GPE topology in 3-node circular topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} +| | ... | ${dut1_to_dut2_ip4_static_adjacency} +| | ... | ${dut2_to_dut1_ip4_static_adjacency} +| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} +| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4} +| | And Configure manual keyed connection for IPSec +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} +| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} +| | Then Send packet and verify headers +| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send packet and verify headers +| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +| TC02: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) lisp_gpe0 Int. +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2,\ +| | ... | Eth-IPv4-ICMPv4 on TG-DUTn. +| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\ +| | ... | IPsec in between DUTs. +| | ... | [Ver] Case: ip4-ipsec-lispgpe-ip4 - main fib +| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\ +| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830, RFC4303. +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Setup 3-node Topology +| | And Add IP Neighbors +| | And Configure LISP GPE topology in 3-node circular topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} +| | ... | ${dut1_to_dut2_ip4_static_adjacency} +| | ... | ${dut2_to_dut1_ip4_static_adjacency} +| | ${lisp_if_idx}= | resources.libraries.python.InterfaceUtil.Get sw if index +| | ... | ${dut1_node} | lisp_gpe0 +| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut1_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} | ${tg1_ip4} +| | ... | ${tg2_ip4} +| | And Configure manual keyed connection for IPSec +| | ... | ${dut2_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} | ${tg2_ip4} +| | ... | ${tg1_ip4} +| | Then Send packet and verify headers +| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send packet and verify headers +| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +| TC03: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on RLOC Int and VRF on EID is enabled. +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2,\ +| | ... | Eth-IPv4-ICMPv4 on TG-DUTn. +| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\ +| | ... | IPsec in between DUTs. +| | ... | [Ver] Case: ip4-lispgpe-ipsec-ip4 - vrf, main fib +| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\ +| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830, RFC4303. +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Setup 3-node Topology | ${fib_table_1} +| | And Add IP Neighbors +| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | And Configure LISP GPE topology in 3-node circular topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} +| | ... | ${dut1_to_dut2_ip4_static_adjacency} +| | ... | ${dut2_to_dut1_ip4_static_adjacency} +| | ... | ${dut1_dut2_vni} | ${fib_table_1} +| | And Configure manual keyed connection for IPSec +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} +| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4} +| | And Configure manual keyed connection for IPSec +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} +| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} +| | Then Send packet and verify headers +| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send packet and verify headers +| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +| TC04: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int and VRF is enabled. +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2,\ +| | ... | Eth-IPv4-ICMPv4 on TG-DUTn. +| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\ +| | ... | IPsec in between DUTs. +| | ... | [Ver] Case: ip4-ipsec-lispgpe-ip4 - vrf, main fib +| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\ +| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830, RFC4303. +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Setup 3-node Topology | ${fib_table_1} +| | And Add IP Neighbors +| | And Configure LISP GPE topology in 3-node circular topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} +| | ... | ${dut1_to_dut2_ip4_static_adjacency} +| | ... | ${dut2_to_dut1_ip4_static_adjacency} +| | ... | ${dut1_dut2_vni} | ${fib_table_1} +| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | ${lisp_if_idx}= | resources.libraries.python.InterfaceUtil.Get sw if index +| | ... | ${dut1_node} | lisp_gpe0 +| | And Configure manual keyed connection for IPSec +| | ... | ${dut1_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} | ${tg1_ip4} +| | ... | ${tg2_ip4} +| | And Configure manual keyed connection for IPSec +| | ... | ${dut2_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} | ${tg2_ip4} +| | ... | ${tg1_ip4} +| | Then Send packet and verify headers +| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send packet and verify headers +| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +*** Keywords *** +| Setup 3-node Topology +| | [Documentation] +| | ... | Setup 3-node topology for this test suite. Set all physical\ +| | ... | interfaces up and assing IP adresses to them.\ +| | ... | You can specify fib table ID where the DUT-TG interfaces assign to.\ +| | ... | Default is 0. +| | ... +| | [Arguments] | ${fib_table}=0 +| | Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | Set interfaces in 3-node circular topology up +| | Assign Interface To Fib Table | ${dut1_node} +| | ... | ${dut1_to_tg} | ${fib_table} +| | Assign Interface To Fib Table | ${dut2_node} +| | ... | ${dut2_to_tg} | ${fib_table} +| | Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} +| | ... | ${prefix4} +| | Set Interface Address | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} +| | ... | ${prefix4} +| | Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} +| | ... | ${prefix4} +| | Set Interface Address | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} +| | ... | ${prefix4} + +| Add IP Neighbors +| | [Documentation] +| | ... | Add IP neighbors to physical interfaces on DUTs. +| | ... +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4} +| | ... | ${tg_to_dut1_mac} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4} +| | ... | ${tg_to_dut2_mac} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4} +| | ... | ${dut2_to_dut1_mac} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4} +| | ... | ${dut1_to_dut2_mac} diff --git a/tests/vpp/func/crypto/eth2p-ethip4ipsectptlispgpe-ip6base-func.robot b/tests/vpp/func/crypto/eth2p-ethip4ipsectptlispgpe-ip6base-func.robot new file mode 100644 index 0000000000..550c9405cc --- /dev/null +++ b/tests/vpp/func/crypto/eth2p-ethip4ipsectptlispgpe-ip6base-func.robot @@ -0,0 +1,160 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.IPUtil +| Library | resources.libraries.python.L2Util +| Library | resources.libraries.python.LispUtil +| Library | resources.libraries.python.IPsecUtil +| Library | resources.libraries.python.VatJsonUtil +| Library | resources.libraries.python.IPv6Setup +| Library | resources.libraries.python.VhostUser +| Library | resources.libraries.python.QemuUtils +| Library | resources.libraries.python.VPPUtil +| Library | String +| Resource | resources/libraries/robot/shared/traffic.robot +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/shared/interfaces.robot +| Resource | resources/libraries/robot/shared/testing_path.robot +| Resource | resources/libraries/robot/ip/ip6.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| Resource | resources/libraries/robot/vm/qemu.robot +| Resource | resources/libraries/robot/overlay/lispgpe.robot +| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot +# Import configuration and test data: +| Variables | resources/test_data/lisp/ipv6_lispgpe_ipv4/ipv6_lispgpe_ipsec_ipv4.py +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP | SKIP_VPP_PATCH +| ... +| Test Setup | Set up functional test +| ... +| Test Teardown | Tear down LISP functional test +| ... +| Documentation | *IPv6 - ip4-ipsec-lispgpe-ip6 - main fib, vrf, virt2lisp,\ +| ... | phy2lisp* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISPGPE-IPSec-IPv6-ICMP,\ +| ... | Eth-IPv4-IPSec-LISPGPE-IPv6-ICMP +| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec.\ +| ... | IPsec is in transport mode. Tests cases are for IPsec configured both\ +| ... | on RLOC interface or lisp_gpe0 interface. +| ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1 to\ +| ... | DUT2 where it is forwarded to TG(if2). +| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303. + +*** Test Cases *** +| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on RLOC Int. +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv4-LISPGPE-IPSec-IPv6-ICMP on DUT1-DUT2, Eth-IPv6-ICMP\ +| | ... | on TG-DUTn. +| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ +| | ... | IPsec in between DUTS. +| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across\ +| | ... | both DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830, RFC4303. +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Setup Topology And Lisp +| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} +| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4} +| | And Configure manual keyed connection for IPSec +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} +| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} +| | Then Send packet and verify headers +| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send packet and verify headers +| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +| TC02: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int. +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMP\ +| | ... | on TG-DUTn. +| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\ +| | ... | IPsec in between DUTS. +| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across\ +| | ... | both DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830, RFC4303. +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Setup Topology And Lisp +| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | ${lisp_if_idx}= | resources.libraries.python.InterfaceUtil.get sw if index +| | ... | ${dut1_node} | ${lisp_gpe_int} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut1_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} +| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4} +| | And Configure manual keyed connection for IPSec +| | ... | ${dut2_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} +| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} +| | Then Send packet and verify headers +| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send packet and verify headers +| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +*** Keywords *** +| Setup Topology And Lisp +| | [Documentation] | Setup IPs and neighbors for interfaces on DUT1 and DUT2\ +| | ... | and then setup LISP. +| | [Arguments] | ${fib_table}=0 | ${vni_table}=0 | ${ip6}=${FALSE} +| | Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | Set interfaces in 3-node circular topology up +| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} +| | ... | ${prefix4} +| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} +| | ... | ${prefix6} +| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} +| | ... | ${prefix4} +| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} +| | ... | ${prefix6} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6} +| | ... | ${tg_to_dut2_mac} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4} +| | ... | ${dut2_to_dut1_mac} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4} +| | ... | ${dut1_to_dut2_mac} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6} +| | ... | ${tg_to_dut1_mac} +| | Vpp All RA Suppress Link Layer | ${nodes} +| | Configure LISP GPE topology in 3-node circular topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_to_dut2_ip_static_adjacency} +| | ... | ${dut2_to_dut1_ip_static_adjacency} +| | ... | ${vni_table} | ${fib_table} diff --git a/tests/vpp/func/crypto/eth2p-ethip4ipsectptlispgpe-ip6basevrf-func.robot b/tests/vpp/func/crypto/eth2p-ethip4ipsectptlispgpe-ip6basevrf-func.robot new file mode 100644 index 0000000000..e85ef57d1f --- /dev/null +++ b/tests/vpp/func/crypto/eth2p-ethip4ipsectptlispgpe-ip6basevrf-func.robot @@ -0,0 +1,133 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.IPUtil +| Library | resources.libraries.python.L2Util +| Library | resources.libraries.python.LispUtil +| Library | resources.libraries.python.IPsecUtil +| Library | resources.libraries.python.VatJsonUtil +| Library | resources.libraries.python.IPv6Setup +| Library | resources.libraries.python.VhostUser +| Library | resources.libraries.python.QemuUtils +| Library | resources.libraries.python.VPPUtil +| Library | String +| Resource | resources/libraries/robot/shared/traffic.robot +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/shared/interfaces.robot +| Resource | resources/libraries/robot/shared/testing_path.robot +| Resource | resources/libraries/robot/ip/ip6.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| Resource | resources/libraries/robot/vm/qemu.robot +| Resource | resources/libraries/robot/overlay/lispgpe.robot +| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot +# Import configuration and test data: +| Variables | resources/test_data/lisp/ipv6_lispgpe_ipv4/ipv6_lispgpe_ipsec_ipv4.py +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP | SKIP_VPP_PATCH +| ... +| Test Setup | Set up functional test +| ... +| Test Teardown | Tear down LISP functional test +| ... +| Documentation | *IPv6 - ip4-ipsec-lispgpe-ip6 - main fib, vrf, virt2lisp,\ +| ... | phy2lisp* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISPGPE-IPSec-IPv6-ICMP,\ +| ... | Eth-IPv4-IPSec-LISPGPE-IPv6-ICMP +| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec.\ +| ... | IPsec is in transport mode. Tests cases are for IPsec configured both\ +| ... | on RLOC interface or lisp_gpe0 interface. +| ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1 to\ +| ... | DUT2 where it is forwarded to TG(if2). +| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303. + +*** Test Cases *** +| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using physical interfaces and VRF is enabled +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv4-IPSec-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2,\ +| | ... | Eth-IPv6-ICMPv6, on TG-DUTn. +| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with\ +| | ... | IPsec in between DUTS. +| | ... | [Ver] Case: ip4-ipsec-lispgpe-ip6 - vrf, phy2lisp +| | ... | Make TG send ICMPv6 Echo Req between its interfaces across both\ +| | ... | DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830, RFC4303. +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | Assign Interface To Fib Table | ${dut1_node} +| | ... | ${dut1_to_tg} | ${fib_table_1} | ip6=${TRUE} +| | Assign Interface To Fib Table | ${dut2_node} +| | ... | ${dut2_to_tg} | ${fib_table_1} | ip6=${TRUE} +| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} +| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4} +| | And Configure manual keyed connection for IPSec +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} +| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} +| | Setup Topology And Lisp | ${fib_table_1} | ${dut1_dut2_vni} +| | Then Send packet and verify headers +| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send packet and verify headers +| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +*** Keywords *** +| Setup Topology And Lisp +| | [Documentation] | Setup IPs and neighbors for interfaces on DUT1 and DUT2\ +| | ... | and then setup LISP. +| | [Arguments] | ${fib_table}=0 | ${vni_table}=0 | ${ip6}=${FALSE} +| | Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | Set interfaces in 3-node circular topology up +| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} +| | ... | ${prefix4} +| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} +| | ... | ${prefix6} +| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} +| | ... | ${prefix4} +| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} +| | ... | ${prefix6} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6} +| | ... | ${tg_to_dut2_mac} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4} +| | ... | ${dut2_to_dut1_mac} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4} +| | ... | ${dut1_to_dut2_mac} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6} +| | ... | ${tg_to_dut1_mac} +| | Vpp All RA Suppress Link Layer | ${nodes} +| | Configure LISP GPE topology in 3-node circular topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_to_dut2_ip_static_adjacency} +| | ... | ${dut2_to_dut1_ip_static_adjacency} +| | ... | ${vni_table} | ${fib_table} diff --git a/tests/vpp/func/crypto/eth2p-ethip6ipsectnl-ip6base-func.robot b/tests/vpp/func/crypto/eth2p-ethip6ipsectnl-ip6base-func.robot new file mode 100644 index 0000000000..26d109a0b7 --- /dev/null +++ b/tests/vpp/func/crypto/eth2p-ethip6ipsectnl-ip6base-func.robot @@ -0,0 +1,523 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/crypto/ipsec.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO +| ... | VM_ENV | HW_ENV | SKIP_VPP_PATCH +| Test Setup | Set up IPv6 IPSec functional test +| ... +| Test Teardown | Tear down IPSec functional test | ${dut_node} +| ... +| Documentation | *IPv6 IPsec tunnel mode test suite.* +| ... +| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ +| ... | between nodes. +| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure +| ... | loopback an physical interface IPv6 addresses, static ARP record, route +| ... | and IPsec manual keyed connection in tunnel mode. +| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet +| ... | is received on TG from DUT1. +| ... | *[Ref] Applicable standard specifications:* RFC4303. + +*** Variables *** +| ${tg_spi}= | ${1000} +| ${dut_spi}= | ${1001} +| ${ESP_PROTO}= | ${50} +| ${tg_if_ip6}= | 3ffe:5f::1 +| ${dut_if_ip6}= | 3ffe:5f::2 +| ${tg_lo_ip6}= | 3ffe:60::3 +| ${dut_lo_ip6}= | 3ffe:60::4 +| ${ip6_plen}= | ${64} +| ${ip6_plen_rt}= | ${128} + +*** Test Cases *** +| TC01: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC02: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA1-96 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-192 and integrity algorithm SHA1-96 in tunnel mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 192 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC03: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA1-96 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-256 and integrity algorithm SHA1-96 in tunnel mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 256 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC04: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA-256-128 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-256-128 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC05: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA-256-128 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-256-128 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | ${encr_alg}= | Crypto Alg AES CBC 192 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC06: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA-256-128 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-256-128 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 256 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC07: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA-384-192 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-384-192 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 384 192 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC08: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA-384-192 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-384-192 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 192 +| | ${auth_alg}= | Integ Alg SHA 384 192 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC09: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA-384-192 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-384-192 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | ${encr_alg}= | Crypto Alg AES CBC 256 +| | ${auth_alg}= | Integ Alg SHA 384 192 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC10: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA-512-256 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-512-256 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC11: VPP process ESP packet in Tunnel Mode with AES-CBC-192 encryption and SHA-512-256 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-512-256 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 192 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC12: VPP process ESP packet in Tunnel Mode with AES-CBC-256 encryption and SHA-512-256 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-512-256 in tunnel\ +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | ${encr_alg}= | Crypto Alg AES CBC 256 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC13: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity - different encryption alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode. +| | ... | [Ver] Send an ESP packet encrypted by encryption key different from\ +| | ... | encryption key stored on VPP node from TG to VPP node and expect no\ +| | ... | response to be received on TG. +| | ... | [Ref] RFC4303. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC14: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity - different integrity alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode. +| | ... | [Ver] Send an ESP packet authenticated by integrity key different\ +| | ... | from integrity key stored on VPP node from TG to VPP node and expect\ +| | ... | no response to be received on TG. +| | ... | [Ref] RFC4303. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC15: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity - different encryption and integrity alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel mode. +| | ... | [Ver] Send an ESP packet authenticated by integrity key and encrypted\ +| | ... | by encryption key different from integrity and encryption keys stored\ +| | ... | on VPP node from TG to VPP node and expect no response to be received\ +| | ... | on TG. +| | ... | [Ref] RFC4303. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto +| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC16: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel\ +| | ... | mode. Then update SA keys - use new keys. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node before\ +| | ... | and after SA keys update. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} +| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto +| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ +| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} +| | ... | ${new_encr_key} | ${new_auth_key} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${new_encr_key} | ${auth_alg} | ${new_auth_key} +| | ... | ${tg_spi} | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC17: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different encryption alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel +| | ... | mode. Then update SA keys - use new keys. +| | ... | [Ver] Send an ESP packet encrypted by encryption key different from\ +| | ... | encryption key stored on VPP node from TG to VPP node and expect no\ +| | ... | response to be received on TG before and after SA keys update. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} +| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto +| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ +| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} +| | ... | ${new_encr_key} | ${new_auth_key} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${new_auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC18: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different integrity alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel\ +| | ... | mode. Then update SA keys - use new keys. +| | ... | [Ver] Send an ESP packet authenticated by integrity key different\ +| | ... | from integrity key stored on VPP node from TG to VPP node and expect\ +| | ... | no response to be received on TG before and after SA keys update. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} +| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto +| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ +| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} +| | ... | ${new_encr_key} | ${new_auth_key} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${new_encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +| TC19: VPP process ESP packet in Tunnel Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different encryption and integrity alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in tunnel\ +| | ... | mode. Then update SA keys - use new keys. +| | ... | [Ver] Send an ESP packet authenticated by integrity key and encrypted\ +| | ... | by encryption key different from integrity and encryption keys stored\ +| | ... | on VPP node from TG to VPP node and expect no response to be received\ +| | ... | on TG before and after SA keys update. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip} +| | ... | ${dut_tun_ip} | ${tg_tun_ip} +| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto +| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} +| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto +| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ +| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} +| | ... | ${new_encr_key} | ${new_auth_key} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip} +| | ... | ${dut_tun_ip} + +*** Keywords *** +| Get Second Random String +| | [Arguments] | ${req_alg} | ${req_type} +| | ${req_key_len}= | Run Keyword | Get ${req_type} Alg Key Len | ${req_alg} +| | ${key}= | Set Variable If | '${req_type}' == 'Crypto' | ${encr_key} +| | ... | '${req_type}' == 'Integ' | ${auth_key} +| | :FOR | ${index} | IN RANGE | 100 +| | | ${req_key}= | Generate Random String | ${req_key_len} +| | | Return From Keyword If | '${req_key}' != '${key}' | ${req_key} diff --git a/tests/vpp/func/crypto/eth2p-ethip6ipsectpt-ip6base-func.robot b/tests/vpp/func/crypto/eth2p-ethip6ipsectpt-ip6base-func.robot new file mode 100644 index 0000000000..e36630b681 --- /dev/null +++ b/tests/vpp/func/crypto/eth2p-ethip6ipsectpt-ip6base-func.robot @@ -0,0 +1,487 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/crypto/ipsec.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO +| ... | VM_ENV | HW_ENV | SKIP_VPP_PATCH +| Test Setup | Set up IPv6 IPSec functional test +| ... +| Test Teardown | Tear down IPSec functional test | ${dut_node} +| ... +| Documentation | *IPv6 IPsec transport mode test suite.* +| ... +| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\ +| ... | between nodes. +| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure +| ... | loopback an physical interface IPv6 addresses, static ARP record, route +| ... | and IPsec manual keyed connection in transport mode. +| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet +| ... | is received on TG from DUT1. +| ... | *[Ref] Applicable standard specifications:* RFC4303. + +*** Variables *** +| ${tg_spi}= | ${1000} +| ${dut_spi}= | ${1001} +| ${ESP_PROTO}= | ${50} +| ${tg_if_ip6}= | 3ffe:5f::1 +| ${dut_if_ip6}= | 3ffe:5f::2 +| ${tg_lo_ip6}= | 3ffe:60::3 +| ${dut_lo_ip6}= | 3ffe:60::4 +| ${ip6_plen}= | ${64} +| ${ip6_plen_rt}= | ${128} + +*** Test Cases *** +| TC01: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC02: VPP process ESP packet in Transport Mode with AES-CBC-192 encryption and SHA1-96 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-192 and integrity algorithm SHA1-96 in transport +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 192 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC03: VPP process ESP packet in Transport Mode with AES-CBC-256 encryption and SHA1-96 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-256 and integrity algorithm SHA1-96 in transport +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 256 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC04: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA-256-128 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-256-128 in transport +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC05: VPP process ESP packet in Transport Mode with AES-CBC-192 encryption and SHA-256-128 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-256-128 in transport +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | ${encr_alg}= | Crypto Alg AES CBC 192 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC06: VPP process ESP packet in Transport Mode with AES-CBC-256 encryption and SHA-256-128 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-256-128 in transport +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 256 +| | ${auth_alg}= | Integ Alg SHA 256 128 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC07: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA-384-192 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-384-192 in transport +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 384 192 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC08: VPP process ESP packet in Transport Mode with AES-CBC-192 encryption and SHA-384-192 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-384-192 in transport +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 192 +| | ${auth_alg}= | Integ Alg SHA 384 192 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC09: VPP process ESP packet in Transport Mode with AES-CBC-256 encryption and SHA-384-192 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-384-192 in transport +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | ${encr_alg}= | Crypto Alg AES CBC 256 +| | ${auth_alg}= | Integ Alg SHA 384 192 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC10: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA-512-256 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-512-256 in transport +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC11: VPP process ESP packet in Transport Mode with AES-CBC-192 encryption and SHA-512-256 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-512-256 in transport +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | [Tags] | SKIP_PATCH +| | ${encr_alg}= | Crypto Alg AES CBC 192 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC12: VPP process ESP packet in Transport Mode with AES-CBC-256 encryption and SHA-512-256 integrity +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-512-256 in transport +| | ... | mode. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node. +| | ${encr_alg}= | Crypto Alg AES CBC 256 +| | ${auth_alg}= | Integ Alg SHA 512 256 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC13: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity - different encryption alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\ +| | ... | mode. +| | ... | [Ver] Send an ESP packet encrypted by encryption key different from\ +| | ... | encryption key stored on VPP node from TG to VPP node and expect no\ +| | ... | response to be received on TG. +| | ... | [Ref] RFC4303. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC14: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity - different integrity alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\ +| | ... | mode. +| | ... | [Ver] Send an ESP packet authenticated by integrity key different\ +| | ... | from integrity key stored on VPP node from TG to VPP node and expect\ +| | ... | no response to be received on TG. +| | ... | [Ref] RFC4303. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC15: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity - different encryption and integrity alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\ +| | ... | mode. +| | ... | [Ver] Send an ESP packet authenticated by integrity key and encrypted\ +| | ... | by encryption key different from integrity and encryption keys stored\ +| | ... | on VPP node from TG to VPP node and expect no response to be received\ +| | ... | on TG. +| | ... | [Ref] RFC4303. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto +| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC16: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\ +| | ... | mode. Then update SA keys - use new keys. +| | ... | [Ver] Send and receive ESP packet between TG and VPP node before\ +| | ... | and after SA keys update. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} +| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto +| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ +| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} +| | ... | ${new_encr_key} | ${new_auth_key} +| | Then Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${new_encr_key} | ${auth_alg} | ${new_auth_key} +| | ... | ${tg_spi} | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC17: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different encryption alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\ +| | ... | mode. Then update SA keys - use new keys. +| | ... | [Ver] Send an ESP packet encrypted by encryption key different from\ +| | ... | encryption key stored on VPP node from TG to VPP node and expect no\ +| | ... | response to be received on TG before and after SA keys update. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} +| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto +| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ +| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} +| | ... | ${new_encr_key} | ${new_auth_key} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${new_auth_key} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC18: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different integrity alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\ +| | ... | mode. Then update SA keys - use new keys. +| | ... | [Ver] Send an ESP packet authenticated by integrity key different\ +| | ... | from integrity key stored on VPP node from TG to VPP node and expect\ +| | ... | no response to be received on TG before and after SA keys update. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} +| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto +| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ +| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} +| | ... | ${new_encr_key} | ${new_auth_key} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${new_encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +| TC19: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different encryption and integrity alogrithms used +| | [Documentation] +| | ... | [Top] TG-DUT1. +| | ... | [Ref] RFC4303. +| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\ +| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\ +| | ... | mode. Then update SA keys - use new keys. +| | ... | [Ver] Send an ESP packet authenticated by integrity key and encrypted\ +| | ... | by encryption key different from integrity and encryption keys stored\ +| | ... | on VPP node from TG to VPP node and expect no response to be received\ +| | ... | on TG before and after SA keys update. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg} +| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip} +| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto +| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} +| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto +| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ +| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id} +| | ... | ${new_encr_key} | ${new_auth_key} +| | Then Run Keyword And Expect Error | ESP packet Rx timeout +| | ... | Send IPsec Packet and verify ESP encapsulation in received packet +| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac} +| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi} +| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip} + +*** Keywords *** +| Get Second Random String +| | [Arguments] | ${req_alg} | ${req_type} +| | ${req_key_len}= | Run Keyword | Get ${req_type} Alg Key Len | ${req_alg} +| | ${key}= | Set Variable If | '${req_type}' == 'Crypto' | ${encr_key} +| | ... | '${req_type}' == 'Integ' | ${auth_key} +| | :FOR | ${index} | IN RANGE | 100 +| | | ${req_key}= | Generate Random String | ${req_key_len} +| | | Return From Keyword If | '${req_key}' != '${key}' | ${req_key} diff --git a/tests/vpp/func/crypto/eth2p-ethip6ipsectptlispgpe-ip4base-func.robot b/tests/vpp/func/crypto/eth2p-ethip6ipsectptlispgpe-ip4base-func.robot new file mode 100644 index 0000000000..f3bc2e28b1 --- /dev/null +++ b/tests/vpp/func/crypto/eth2p-ethip6ipsectptlispgpe-ip4base-func.robot @@ -0,0 +1,158 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.IPUtil +| Library | resources.libraries.python.L2Util +| Library | resources.libraries.python.LispUtil +| Library | resources.libraries.python.IPsecUtil +| Library | resources.libraries.python.VatJsonUtil +| Library | resources.libraries.python.IPv6Setup +| Library | resources.libraries.python.VhostUser +| Library | resources.libraries.python.QemuUtils +| Library | String +| Resource | resources/libraries/robot/shared/traffic.robot +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/shared/interfaces.robot +| Resource | resources/libraries/robot/shared/testing_path.robot +| Resource | resources/libraries/robot/ip/ip6.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| Resource | resources/libraries/robot/vm/qemu.robot +| Resource | resources/libraries/robot/overlay/lispgpe.robot +| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot +# Import configuration and test data: +| Variables | resources/test_data/lisp/ipv4_lispgpe_ipv6/ipv4_lispgpe_ipsec_ipv6.py +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP | SKIP_VPP_PATCH +| ... +| Test Setup | Set up functional test +| ... +| Test Teardown | Tear down functional test +| ... +| Documentation | *IPv6 - ip4-ipsec-lispgpe-ip6 - main fib, virt2lisp, phy2lisp* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISPGPE-IPSec-IPv4-ICMP,\ +| ... | Eth-IPv6-IPSec-LISPGPE-IPv4-ICMP +| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec.\ +| ... | IPsec is in transport mode. Tests cases are for IPsec configured both\ +| ... | on RLOC interface or lisp_gpe0 interface. +| ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1 to\ +| ... | DUT2 where it is forwarded to TG(if2). +| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303. + +*** Test Cases *** +| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on RLOC Int. +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv6-LISPGPE-IPSec-IPv4-ICMP on DUT1-DUT2, Eth-IPv4-ICMP\ +| | ... | on TG-DUTn. +| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ +| | ... | IPsec in between DUTS. +| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across\ +| | ... | both DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830, RFC4303. +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Setup Topology And Lisp +| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} +| | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6} +| | And Configure manual keyed connection for IPSec +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} +| | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6} +| | Then Send packet and verify headers +| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send packet and verify headers +| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +| TC02: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int. +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv6-IPSec-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMP\ +| | ... | on TG-DUTn. +| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ +| | ... | IPsec in between DUTS. +| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across\ +| | ... | both DUTs and LISP GPE tunnel between them; verify IPv4 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830, RFC4303. +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Setup Topology And Lisp +| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | ${lisp_if_idx}= | resources.libraries.python.InterfaceUtil.get sw if index +| | ... | ${dut1_node} | ${lisp_gpe_int} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut1_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} +| | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6} +| | And Configure manual keyed connection for IPSec +| | ... | ${dut2_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} +| | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6} +| | Then Send packet and verify headers +| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send packet and verify headers +| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +*** Keywords *** +| Setup Topology And Lisp +| | [Documentation] | Setup IPs and neighbors for interfaces on DUT1 and DUT2\ +| | ... | and then setup LISP. +| | Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | Set interfaces in 3-node circular topology up +| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} +| | ... | ${prefix6} +| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} +| | ... | ${prefix6} +| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} +| | ... | ${prefix4} +| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} +| | ... | ${prefix6} +| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} +| | ... | ${prefix4} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4} +| | ... | ${tg_to_dut2_mac} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_dut1_mac} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6} +| | ... | ${dut1_to_dut2_mac} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4} +| | ... | ${tg_to_dut1_mac} +| | Vpp All RA Suppress Link Layer | ${nodes} +| | Configure LISP GPE topology in 3-node circular topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} +| | ... | ${dut1_to_dut2_ip_static_adjacency} +| | ... | ${dut2_to_dut1_ip_static_adjacency} diff --git a/tests/vpp/func/crypto/eth2p-ethip6ipsectptlispgpe-ip6base-func.robot b/tests/vpp/func/crypto/eth2p-ethip6ipsectptlispgpe-ip6base-func.robot new file mode 100644 index 0000000000..ca81b425c8 --- /dev/null +++ b/tests/vpp/func/crypto/eth2p-ethip6ipsectptlispgpe-ip6base-func.robot @@ -0,0 +1,174 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.Trace +| Library | resources.libraries.python.IPUtil +| Library | resources.libraries.python.L2Util +| Library | resources.libraries.python.LispUtil +| Library | resources.libraries.python.VPPUtil +| Library | resources.libraries.python.IPsecUtil +| Library | resources.libraries.python.VatJsonUtil +| Library | resources.libraries.python.IPv6Setup +| Library | resources.libraries.python.VhostUser +| Library | resources.libraries.python.QemuUtils +| Library | String +| Resource | resources/libraries/robot/shared/traffic.robot +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/shared/interfaces.robot +| Resource | resources/libraries/robot/shared/testing_path.robot +| Resource | resources/libraries/robot/ip/ip6.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| Resource | resources/libraries/robot/vm/qemu.robot +| Resource | resources/libraries/robot/overlay/lispgpe.robot +| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot +# Import configuration and test data: +| Variables | resources/test_data/lisp/ipv6_lispgpe_ipv6/ipv6_lispgpe_ipsec_ipv6.py +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP | SKIP_VPP_PATCH +| ... +| Test Setup | Run Keywords | Set up functional test +| ... | AND | Vpp All Ra Suppress Link Layer | ${nodes} +| ... +| Test Teardown | Tear down functional test +| ... +| Documentation | *IPv6 - ip6-ipsec-lispgpe-ip6 - main fib, +| ... | vrf (gpe_vni-to-vrf), phy2lisp, virt2lisp* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-IPSec-LISPGPE-IPv6-ICMPv6,\ +| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec.\ +| ... | IPsec is in transport mode. Tests cases are for IPsec configured both\ +| ... | on RLOC interface or lisp_gpe0 interface. +| ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1\ +| ... | to DUT2 where it is forwarded to TG(if2). +| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303. + +*** Variables *** +| ${dut2_spi}= | ${1000} +| ${dut1_spi}= | ${1001} + +| ${ESP_PROTO}= | ${50} + +| ${bid}= | 10 + +*** Test Cases *** +| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using IPsec (transport) on RLOC Int. +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv6-IPSec-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2,\ +| | ... | Eth-IPv6-ICMPv6 on TG-DUTn. +| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ +| | ... | IPsec in between DUTS. +| | ... | [Ver] Case: ip6-lispgpe-ipsec-ip6 - main fib, phys2lisp\ +| | ... | Make TG send ICMPv6 Echo Req between its interfaces across\ +| | ... | both DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830, RFC4303. +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Setup Topology +| | And Configure LISP GPE topology in 3-node circular topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_to_dut2_ip6_static_adjacency} +| | ... | ${dut2_to_dut1_ip6_static_adjacency} +| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} +| | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6} +| | And Configure manual keyed connection for IPSec +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} +| | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6} +| | Then Send packet and verify headers +| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send packet and verify headers +| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +| TC02: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using IPsec (transport) lisp_gpe0 Int. +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv6-IPSec-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2,\ +| | ... | Eth-IPv6-ICMPv6 on TG-DUTn. +| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ +| | ... | IPsec in between DUTS. +| | ... | [Ver] Case: ip6-ipsec-lispgpe-ip6 - main fib, phys2lisp\ +| | ... | Make TG send ICMPv6 Echo Req between its interfaces across\ +| | ... | both DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ +| | ... | received packets are correct. +| | ... | [Ref] RFC6830, RFC4303. +| | ... +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 +| | Given Setup Topology +| | And Configure LISP GPE topology in 3-node circular topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_to_dut2_ip6_static_adjacency} +| | ... | ${dut2_to_dut1_ip6_static_adjacency} +| | ${lisp_if_idx}= | resources.libraries.python.InterfaceUtil.get sw if index +| | ... | ${dut1_node} | lisp_gpe0 +| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Configure manual keyed connection for IPSec +| | ... | ${dut1_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} | ${tg1_ip6} +| | ... | ${tg2_ip6} +| | And Configure manual keyed connection for IPSec +| | ... | ${dut2_node} | ${lisp_if_idx} | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} | ${tg2_ip6} +| | ... | ${tg1_ip6} +| | Then Send packet and verify headers +| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send packet and verify headers +| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} + +*** Keywords *** +| Setup Topology +| | Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | Set interfaces in 3-node circular topology up +| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} +| | ... | ${prefix6} +| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} +| | ... | ${prefix6} +| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} +| | ... | ${prefix6} +| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} +| | ... | ${prefix6} +| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} +| | ... | ${prefix6} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6} +| | ... | ${tg_to_dut1_mac} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6} +| | ... | ${tg_to_dut2_mac} +| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_dut1_mac} +| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6} +| | ... | ${dut1_to_dut2_mac} +| | Vpp All RA Suppress Link Layer | ${nodes} |