diff options
Diffstat (limited to 'tests/vpp/func/honeycomb/mgmt-cfg-apihcv6-func.robot')
| -rw-r--r-- | tests/vpp/func/honeycomb/mgmt-cfg-apihcv6-func.robot | 181 |
1 files changed, 181 insertions, 0 deletions
diff --git a/tests/vpp/func/honeycomb/mgmt-cfg-apihcv6-func.robot b/tests/vpp/func/honeycomb/mgmt-cfg-apihcv6-func.robot new file mode 100644 index 0000000000..0be827eaaf --- /dev/null +++ b/tests/vpp/func/honeycomb/mgmt-cfg-apihcv6-func.robot @@ -0,0 +1,181 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Variables *** +# IP addresses for IPv6 link +| ${tg_to_dut_if2_ip}= | fd00:1234::1 +| ${dut_to_tg_if2_ip}= | fd00:1234::2 +| ${ipv6_prefix}= | ${64} +# Configuration which will be set and verified during tests. +| ${bd1_name}= | bd-01 +| ${bd2_name}= | bd-02 +| &{bd_settings}= | flood=${True} | forward=${True} | learn=${True} +| ... | unknown-unicast-flood=${True} | arp-termination=${True} +| &{if_settings}= | split_horizon_group=${1} | bvi=${False} +| &{if_settings2}= | split_horizon_group=${2} | bvi=${True} +| ${vhost_interface}= | test_vhost +| &{vhost_user_server}= | socket=/tmp/soc1 | role=server +| &{vhost_user_server_edit_1}= | socket=/tmp/soc12 | role=server +| &{vhost_user_server_edit_2}= | socket=/tmp/soc12 | role=client + +*** Settings *** +| Library | resources.libraries.python.honeycomb.IPv6Management +| Library | resources.libraries.python.VPPUtil +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/honeycomb/honeycomb.robot +| Resource | resources/libraries/robot/honeycomb/interfaces.robot +| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot +| Resource | resources/libraries/robot/honeycomb/ipv6_control.robot +| Resource | resources/libraries/robot/shared/testing_path.robot +| Resource | resources/libraries/robot/honeycomb/netconf.robot +| Resource | resources/libraries/robot/honeycomb/vhost_user.robot +| Variables | resources/test_data/honeycomb/netconf/triggers.py +| ... +| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} +| ... +| Suite Teardown | Run Keywords +| ... | Unconfigure IPv6 Management Interface | AND +| ... | Tear Down Honeycomb Functional Test Suite | ${node} +| ... +# IPv6 is disabled in VIRL images +| Force Tags | HC_FUNC | EXPECTED_FAILING +| ... +| Documentation | *Honeycomb IPv6 control interface test suite.* + +*** Test Cases *** +| TC01: Honeycomb sets up l2 bridge domain +| | [Documentation] | Check if Honeycomb can create bridge domains on VPP node. +| | ... +| | [Setup] | Configure IPv6 Management Interface +| | When Honeycomb creates first l2 bridge domain +| | ... | ${tunneled_node} | ${bd1_name} | ${bd_settings} +| | Then Bridge domain Operational Data From Honeycomb Should Be +| | ... | ${tunneled_node} | ${bd1_name} | ${bd_settings} + +| TC02: Honeycomb removes bridge domains +| | [Documentation] | Check if Honeycomb can remove bridge domains from a VPP\ +| | ... | node. +| | ... +| | Given Bridge domain Operational Data From Honeycomb Should Be +| | ... | ${tunneled_node} | ${bd1_name} | ${bd_settings} +| | When Honeycomb removes all bridge domains | ${tunneled_node} +| | Then Honeycomb should show no bridge domains | ${tunneled_node} + +| TC03: Honeycomb creates vhost-user interface - server +| | [Documentation] | Check if Honeycomb creates a vhost-user interface, role:\ +| | ... | server. +| | ... +| | Given vhost-user Operational Data From Honeycomb Should Be empty +| | ... | ${tunneled_node} | ${vhost_interface} +| | When Honeycomb creates vhost-user interface +| | ... | ${tunneled_node} | ${vhost_interface} | ${vhost_user_server} +| | Then vhost-user Operational Data From Honeycomb Should Be +| | ... | ${tunneled_node} | ${vhost_interface} | ${vhost_user_server} + +| TC04: Honeycomb modifies vhost-user interface - server +| | [Documentation] | Check if Honeycomb can modify properties of existing\ +| | ... | vhost-user interface, role: server. +| | ... +| | Given vhost-user Operational Data From Honeycomb Should Be +| | ... | ${tunneled_node} | ${vhost_interface} | ${vhost_user_server} +| | When Honeycomb configures vhost-user interface +| | ... | ${tunneled_node} | ${vhost_interface} | ${vhost_user_server_edit_1} +| | Then vhost-user Operational Data From Honeycomb Should Be +| | ... | ${tunneled_node} | ${vhost_interface} | ${vhost_user_server_edit_1} +| | When Honeycomb configures vhost-user interface +| | ... | ${tunneled_node} | ${vhost_interface} | ${vhost_user_server_edit_2} +| | Then vhost-user Operational Data From Honeycomb Should Be +| | ... | ${tunneled_node} | ${vhost_interface} | ${vhost_user_server_edit_2} +| | When Honeycomb configures vhost-user interface +| | ... | ${tunneled_node} | ${vhost_interface} | ${vhost_user_server} +| | Then vhost-user Operational Data From Honeycomb Should Be +| | ... | ${tunneled_node} | ${vhost_interface} | ${vhost_user_server} + +| TC05: Honeycomb deletes vhost-user interface - server +| | [Documentation] | Check if Honeycomb can delete an existing vhost-user\ +| | ... | interface, role: server. +| | ... +| | Given vhost-user Operational Data From Honeycomb Should Be +| | ... | ${tunneled_node} | ${vhost_interface} | ${vhost_user_server} +| | When Honeycomb removes vhost-user interface +| | ... | ${tunneled_node} | ${vhost_interface} +| | Then vhost-user Operational Data From Honeycomb Should Be empty +| | ... | ${tunneled_node} | ${vhost_interface} + +| TC06: Honeycomb can create and delete interfaces +| | [Documentation] | Repeatedly create and delete an interface through Netconf\ +| | ... | and check the reply for any errors. +| | ... +| | Given Netconf session should be established | ${tunneled_node} +| | And Honeycomb creates first L2 bridge domain +| | ... | ${tunneled_node} | bd_netconf | ${bd_settings} +| | :FOR | ${index} | IN RANGE | 20 +| | | When Error trigger is sent | ${trigger_105} +| | | Then Replies should not contain RPC errors + +| TC07: Honeycomb can create vlan subinterface +| | [Documentation] | Configure a Vlan sub-interface under a physical interface. +| | ... +| | Given Netconf session should be established | ${tunneled_node} +| | When Error Trigger Is Sent +| | ... | ${trigger_vlan} | interface=${interface} +| | Then Replies should not contain RPC errors + +*** Keywords *** +| Configure IPv6 Management Interface +| | [Documentation] | Change one of VPP's data-plane interfaces on DUT into\ +| | ... | a control-plane interface that Honeycomb can listen on. Setup IPv6\ +| | ... | addresses on the link. Create an IPv4 to IPv6 tunnel on TG and create\ +| | ... | suite variables. +| | ... +| | Configure path in 2-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | Stop VPP service on DUT | ${dut_node} +| | Stop Honeycomb Service on DUTs | ${dut_node} +| | Convert data-plane interface to control-plane +| | ... | ${dut_node} | ${dut_to_tg_if2} +| | Sleep | 5sec | Wait until Linux reclaims the interface. +| | ${tg_to_dut_if2_name}= | Get Interface Name by MAC +| | ... | ${tg_node} | ${tg_to_dut_if2_mac} +| | ${dut_to_tg_if2_name}= | Get Interface Name by MAC +| | ... | ${dut_node} | ${dut_to_tg_if2_mac} +| | ${tunneled_node}= | Copy Dictionary | ${dut_node} +| | Set To Dictionary | ${tunneled_node} | host | ${tg_node['host']} +| | ${interface}= | Get Interface Name | ${dut_node} | ${dut_to_tg_if1} +| | Set Suite Variable | ${interface} +| | Set Suite Variable | ${tunneled_node} +| | Set Suite Variable | ${tg_node} +| | Set Suite Variable | ${dut_node} +| | Set Suite Variable | ${dut_to_tg_if2} +| | Set Suite Variable | ${dut_to_tg_if2_name} +| | Set Suite Variable | ${tg_to_dut_if2_name} +| | Set management interface address +| | ... | ${tg_node} | ${tg_to_dut_if2_name} +| | ... | ${tg_to_dut_if2_ip} | ${ipv6_prefix} +| | Set management interface address +| | ... | ${dut_node} | ${dut_to_tg_if2_name} +| | ... | ${dut_to_tg_if2_ip} | ${ipv6_prefix} +| | Configure Control Interface Tunnel +| | ... | ${tg_node} | ${dut_node['honeycomb']['port']} +| | ... | ${dut_to_tg_if2_ip} | ${dut_node['honeycomb']['port']} +| | Configure Control Interface Tunnel +| | ... | ${tg_node} | ${dut_node['honeycomb']['netconf_port']} +| | ... | ${dut_to_tg_if2_ip} | ${dut_node['honeycomb']['netconf_port']} +| | Start VPP service on DUT | ${dut_node} +| | Configure Honeycomb service on DUTs | ${dut_node} + +| Unconfigure IPv6 Management Interface +| | [Documentation] | Remove all IP addresses from interfaces in the IPv6 link. +| | ... +| | Clear Interface Configuration | ${tg_node} | ${tg_to_dut_if2_name} +| | Clear Interface Configuration | ${dut_node} | ${dut_to_tg_if2_name} |