diff options
Diffstat (limited to 'tests/vpp/func/honeycomb/mgmt-cfg-l2fib-apihc-apivat-func.robot')
| -rw-r--r-- | tests/vpp/func/honeycomb/mgmt-cfg-l2fib-apihc-apivat-func.robot | 232 |
1 files changed, 0 insertions, 232 deletions
diff --git a/tests/vpp/func/honeycomb/mgmt-cfg-l2fib-apihc-apivat-func.robot b/tests/vpp/func/honeycomb/mgmt-cfg-l2fib-apihc-apivat-func.robot deleted file mode 100644 index 9aae85c7ac..0000000000 --- a/tests/vpp/func/honeycomb/mgmt-cfg-l2fib-apihc-apivat-func.robot +++ /dev/null @@ -1,232 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot -| Resource | resources/libraries/robot/honeycomb/l2_fib.robot -| Variables | resources/test_data/honeycomb/l2_fib.py | ${node} | ${interface} -| ... | ${interface2} -| ... -| Documentation | *Honeycomb L2 FIB management test suite.* -| ... -| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node} -| ... -| Force Tags | HC_FUNC - -*** Variables *** -# Interface to run tests on. -| ${interface}= | ${node['interfaces']['port1']['name']} -| ${interface2}= | ${node['interfaces']['port3']['name']} - -*** Test Cases *** -| TC01: Honeycomb adds L2 FIB entry (forward) -| | [Documentation] | Honeycomb creates a bridge domain and assignes an \ -| | ... | interface to it. Then adds an L2 FIB entry (forward) to the bridge \ -| | ... | domain. -| | ... -| | [Teardown] | Honeycomb removes L2 FIB entry -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper['phys-address']} -| | ... -| | Given Interface state from Honeycomb should be -| | ... | ${node} | ${interface} | down -| | When Honeycomb configures interface state -| | ... | ${node} | ${interface} | up -| | Then Interface state from Honeycomb should be -| | ... | ${node} | ${interface} | up -| | When Honeycomb creates first l2 bridge domain -| | ... | ${node} | ${bd_name} | ${bd_settings} -| | Then Bridge domain Operational Data From Honeycomb Should Be -| | ... | ${node} | ${bd_name} | ${bd_settings} -| | Given Bridge domain Operational Interface Assignment should be empty -| | ... | ${node} | ${interface} -| | When Honeycomb adds interface to bridge domain -| | ... | ${node} | ${interface} | ${bd_name} | ${if_bd_settings} -| | Then Bridge domain Operational Interface Assignment should be -| | ... | ${node} | ${interface} | ${if_bd_settings} -| | Given L2 FIB Table from Honeycomb should be empty -| | ... | ${node} | ${bd_name} -| | And L2 FIB Table from VAT should be empty -| | ... | ${node} | ${bd_index} -| | When Honeycomb adds L2 FIB entry to bridge domain -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg} -| | Then L2 FIB Entry from Honeycomb should be -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper} -| | And L2 FIB entry from VAT should be -| | ... | ${node} | ${bd_index} | ${l2_fib_forward_vat} - -| TC02: Honeycomb adds L2 FIB entry (static, forward) -| | [Documentation] | Honeycomb adds an L2 FIB entry (static, forward) to the \ -| | ... | bridge domain. -| | ... -| | [Teardown] | Honeycomb removes L2 FIB entry -| | ... | ${node} | ${bd_name} | ${l2_fib_static_forward_oper['phys-address']} -| | ... -| | Given Bridge domain Operational Interface Assignment should be -| | ... | ${node} | ${interface} | ${if_bd_settings} -| | And L2 FIB Table from Honeycomb should be empty -| | ... | ${node} | ${bd_name} -| | And L2 FIB Table from VAT should be empty -| | ... | ${node} | ${bd_index} -| | When Honeycomb adds L2 FIB entry to bridge domain -| | ... | ${node} | ${bd_name} | ${l2_fib_static_forward_cfg} -| | Then L2 FIB Entry from Honeycomb should be -| | ... | ${node} | ${bd_name} | ${l2_fib_static_forward_oper} -| | And L2 FIB entry from VAT should be -| | ... | ${node} | ${bd_index} | ${l2_fib_static_forward_vat} - -| TC03: Honeycomb adds L2 FIB entry (static, filter) -| | [Documentation] | Honeycomb adds an L2 FIB entry (static, filter) to the \ -| | ... | bridge domain. -| | ... -| | [Teardown] | Honeycomb removes L2 FIB entry -| | ... | ${node} | ${bd_name} | ${l2_fib_filter_oper['phys-address']} -| | ... -| | Given Bridge domain Operational Interface Assignment should be -| | ... | ${node} | ${interface} | ${if_bd_settings} -| | And L2 FIB Table from Honeycomb should be empty -| | ... | ${node} | ${bd_name} -| | And L2 FIB Table from VAT should be empty -| | ... | ${node} | ${bd_index} -| | When Honeycomb adds L2 FIB entry to bridge domain -| | ... | ${node} | ${bd_name} | ${l2_fib_filter_cfg} -| | Then L2 FIB Entry from Honeycomb should be -| | ... | ${node} | ${bd_name} | ${l2_fib_filter_oper} -| | And L2 FIB entry from VAT should be -| | ... | ${node} | ${bd_index} | ${l2_fib_filter_vat} - -| TC04: Honeycomb adds and removes L2 FIB entry (forward) -| | [Documentation] | Honeycomb adds an L2 FIB entry (forward) to the bridge \ -| | ... | domain and then Honeycomb removes it from the bridge domain. -| | ... -| | [Teardown] | Honeycomb removes L2 FIB entry -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper['phys-address']} -| | ... -| | Given Bridge domain Operational Interface Assignment should be -| | ... | ${node} | ${interface} | ${if_bd_settings} -| | And L2 FIB Table from Honeycomb should be empty -| | ... | ${node} | ${bd_name} -| | And L2 FIB Table from VAT should be empty -| | ... | ${node} | ${bd_index} -| | When Honeycomb adds L2 FIB entry to bridge domain -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg} -| | Then L2 FIB Entry from Honeycomb should be -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper} -| | And L2 FIB entry from VAT should be -| | ... | ${node} | ${bd_index} | ${l2_fib_forward_vat} -| | When Honeycomb removes L2 FIB entry -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper['phys-address']} -| | Then L2 FIB Table from Honeycomb should be empty -| | ... | ${node} | ${bd_name} -| | And L2 FIB Table from VAT should be empty -| | ... | ${node} | ${bd_index} - -| TC05: Honeycomb adds more than one L2 FIB entry -| | [Documentation] | Honeycomb adds three L2 FIB entries to the bridge domain. -| | ... -| | [Teardown] | Honeycomb removes all L2 FIB entries -| | ... | ${node} | ${bd_name} -| | ... -| | Given Bridge domain Operational Interface Assignment should be -| | ... | ${node} | ${interface} | ${if_bd_settings} -| | And L2 FIB Table from Honeycomb should be empty -| | ... | ${node} | ${bd_name} -| | And L2 FIB Table from VAT should be empty -| | ... | ${node} | ${bd_index} -| | When Honeycomb adds L2 FIB entry to bridge domain -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg} -| | And Honeycomb adds L2 FIB entry to bridge domain -| | ... | ${node} | ${bd_name} | ${l2_fib_static_forward_cfg} -| | And Honeycomb adds L2 FIB entry to bridge domain -| | ... | ${node} | ${bd_name} | ${l2_fib_filter_cfg} -| | Then L2 FIB Entry from Honeycomb should be -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper} -| | And L2 FIB Entry from Honeycomb should be -| | ... | ${node} | ${bd_name} | ${l2_fib_static_forward_oper} -| | And L2 FIB Entry from Honeycomb should be -| | ... | ${node} | ${bd_name} | ${l2_fib_filter_oper} -| | And L2 FIB entry from VAT should be -| | ... | ${node} | ${bd_index} | ${l2_fib_forward_vat} -| | And L2 FIB entry from VAT should be -| | ... | ${node} | ${bd_index} | ${l2_fib_static_forward_vat} -| | And L2 FIB entry from VAT should be -| | ... | ${node} | ${bd_index} | ${l2_fib_filter_vat} - -| TC06: Honeycomb fails to set wrong L2 FIB entry -| | [Documentation] | Honeycomb tries to add an L2 FIB entry with wrong \ -| | ... | parameters to the bridge domain. It must fail. -| | ... -| | [Teardown] | Honeycomb removes all L2 FIB entries -| | ... | ${node} | ${bd_name} -| | ... -| | Given Bridge domain Operational Interface Assignment should be -| | ... | ${node} | ${interface} | ${if_bd_settings} -| | And L2 FIB Table from Honeycomb should be empty -| | ... | ${node} | ${bd_name} -| | And L2 FIB Table from VAT should be empty -| | ... | ${node} | ${bd_index} -| | When Honeycomb fails to add wrong L2 FIB entry -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg_wrong_mac} -| | Then L2 FIB Table from Honeycomb should be empty -| | ... | ${node} | ${bd_name} -| | And L2 FIB Table from VAT should be empty -| | ... | ${node} | ${bd_index} -| | When Honeycomb fails to add wrong L2 FIB entry -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg_wrong_if} -| | Then L2 FIB Table from Honeycomb should be empty -| | ... | ${node} | ${bd_name} -| | And L2 FIB Table from VAT should be empty -| | ... | ${node} | ${bd_index} -| | When Honeycomb fails to add wrong L2 FIB entry -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg_wrong_action} -| | Then L2 FIB Table from Honeycomb should be empty -| | ... | ${node} | ${bd_name} -| | And L2 FIB Table from VAT should be empty -| | ... | ${node} | ${bd_index} - -| TC07: Honeycomb fails to modify existing L2 FIB entry -| | [Documentation] | Honeycomb tries to modify an existing L2 FIB entry. It \ -| | ... | must fail. -| | ... -| | [Teardown] | Honeycomb removes all L2 FIB entries -| | ... | ${node} | ${bd_name} -| | ... -| | Given Bridge domain Operational Interface Assignment should be -| | ... | ${node} | ${interface} | ${if_bd_settings} -| | And L2 FIB Table from Honeycomb should be empty -| | ... | ${node} | ${bd_name} -| | And L2 FIB Table from VAT should be empty -| | ... | ${node} | ${bd_index} -| | When Honeycomb adds L2 FIB entry to bridge domain -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg} -| | Then L2 FIB Entry from Honeycomb should be -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper} -| | When Honeycomb fails to modify L2 FIB entry -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper['phys-address']} -| | ... | outgoing-interface -| | ... | ${l2_fib_forward_modified_cfg['outgoing-interface']} -| | Then L2 FIB Entry from Honeycomb should be -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper} -| | And L2 FIB entry from VAT should be -| | ... | ${node} | ${bd_index} | ${l2_fib_forward_vat} - -*** Keywords *** -| Set test interface down -| | [Documentation] | Set the interface used in tests down. -| | ... -| | Honeycomb configures interface state -| | ... | ${node} | ${interface} | down |