aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot
diff options
context:
space:
mode:
Diffstat (limited to 'tests/vpp/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot')
-rw-r--r--tests/vpp/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot224
1 files changed, 224 insertions, 0 deletions
diff --git a/tests/vpp/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot b/tests/vpp/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot
new file mode 100644
index 0000000000..ac5af9ab83
--- /dev/null
+++ b/tests/vpp/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot
@@ -0,0 +1,224 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Variables***
+| ${ip_address}= | 192.168.0.4
+| @{ip_addresses}= | 192.168.0.4 | 192.168.0.5 | 192.168.0.6 | 192.168.0.7
+| ${state}= | enabled
+| ${interface}= | ${node['interfaces']['port1']['name']}
+| ${bd_name}= | bd_lisp
+| ${bd2_name}= | bd2_lisp
+| &{bd_settings}= | flood=${True} | forward=${True} | learn=${True}
+| ... | unknown-unicast-flood=${True} | arp-termination=${True}
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
+| Resource | resources/libraries/robot/honeycomb/lisp.robot
+| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot
+| Variables | resources/test_data/honeycomb/lisp.py
+| ...
+| Documentation | *Honeycomb Lisp test suite.*
+| ...
+| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node}
+| ...
+| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node}
+| ...
+| Force Tags | HC_FUNC
+
+*** Test Cases ***
+| TC01: Honeycomb enables LISP feature
+| | [Documentation] | Check if Honeycomb can enable the Lisp feature.
+| | ...
+| | Given Lisp Should Not Be Configured | ${node}
+| | When Honeycomb enables LISP | ${node}
+| | Then LISP state from Honeycomb should be | ${node} | ${state}
+| | And LISP state from VAT should be | ${node} | ${state}
+
+| TC02: Honeycomb adds locator set and locator
+| | [Documentation] | Check if Honeycomb can configure a locator set.
+| | ...
+| | Given LISP state from Honeycomb should be | ${node} | ${state}
+| | When Honeycomb adds locator set | ${node} | ${interface} | ${locator_set}
+| | Then Locator Set From Honeycomb Should Be
+| | ... | ${node} | ${interface} | ${locator_set}
+
+| TC03: Honeycomb configures Lisp - remote mapping - Bridge Domain
+| | [Documentation] | Check if Honeycomb can configure a remote Lisp mapping\
+| | ... | with a bridge domain.
+| | ...
+| | Given LISP state from Honeycomb should be | ${node} | ${state}
+| | And Honeycomb creates first l2 bridge domain
+| | ... | ${node} | ${bd_name} | ${bd_settings}
+| | When Honeycomb adds LISP mapping | ${node} | ${lisp_settings_remote_bd}
+| | Then LISP mapping from Honeycomb should be
+| | ... | ${node} | ${remote_bd_subtable}
+| | And LISP mapping from VAT should be
+| | ... | ${node} | ${vat_remote_bd}
+
+| TC04: Honeycomb can remove Lisp mapping
+| | [Documentation] | Check if Honeycomb can remove a configured Lisp mapping.
+| | ...
+| | Given LISP mapping from Honeycomb should be
+| | ... | ${node} | ${remote_bd_subtable}
+| | And LISP mapping from VAT should be
+| | ... | ${node} | ${vat_remote_bd}
+| | When Honeycomb removes all lisp mappings | ${node}
+| | Then LISP mappings from Honeycomb should not exist
+| | ... | ${node}
+| | And LISP mappings from VAT should not exist
+| | ... | ${node}
+
+| TC05: Honeycomb configures Lisp - remote mapping - VRF
+| | [Documentation] | Check if Honeycomb can configure a remote Lisp mapping\
+| | ... | with VRF.
+| | ...
+| | [Teardown] | Honeycomb removes all lisp mappings | ${node}
+| | ...
+| | Given LISP mappings from Honeycomb should not exist
+| | ... | ${node}
+| | And LISP mappings from VAT should not exist
+| | ... | ${node}
+| | When Honeycomb adds LISP mapping | ${node} | ${lisp_settings_remote_vrf}
+| | Then LISP mapping from Honeycomb should be
+| | ... | ${node} | ${remote_vrf_subtable}
+| | And LISP mapping from VAT should be | ${node} | ${vat_remote_vrf}
+
+| TC06: Honeycomb configures Lisp - local mapping - Bridge Domain
+| | [Documentation] | Check if Honeycomb can configure a local Lisp mapping\
+| | ... | with a bridge domain.
+| | ...
+| | [Teardown] | Honeycomb removes all lisp mappings | ${node}
+| | ...
+| | Given Locator Set From Honeycomb Should Be
+| | ... | ${node} | ${interface} | ${locator_set}
+| | And LISP mappings from Honeycomb should not exist
+| | ... | ${node}
+| | And LISP mappings from VAT should not exist
+| | ... | ${node}
+| | And Honeycomb creates first l2 bridge domain
+| | ... | ${node} | ${bd2_name} | ${bd_settings}
+| | When Honeycomb adds LISP mapping | ${node} | ${lisp_settings_local_bd}
+| | Then LISP mapping from Honeycomb should be | ${node} | ${local_bd_subtable}
+| | And LISP mapping from VAT should be | ${node} | ${vat_local_bd}
+
+| TC07: Honeycomb configures Lisp - local mapping - VRF
+| | [Documentation] | Check if Honeycomb can configure a local Lisp mapping\
+| | ... | with VRF.
+| | ...
+| | [Teardown] | Honeycomb removes all lisp mappings | ${node}
+| | ...
+| | Given Locator Set From Honeycomb Should Be
+| | ... | ${node} | ${interface} | ${locator_set}
+| | And LISP mappings from Honeycomb should not exist
+| | ... | ${node}
+| | And LISP mappings from VAT should not exist
+| | ... | ${node}
+| | When Honeycomb adds LISP mapping | ${node} | ${lisp_settings_local_vrf}
+| | Then LISP mapping from Honeycomb should be | ${node} | ${local_vrf_subtable}
+| | And LISP mapping from VAT should be | ${node} | ${vat_local_vrf}
+
+| TC08: Honeycomb configures Lisp mapping with adjacency
+| | [Documentation] | Check if Honeycomb can configure local and remote Lisp\
+| | ... | mappings with VRF, and configure adjacency.
+| | ...
+| | [Teardown] | Honeycomb removes all lisp mappings | ${node}
+| | ...
+| | Given Locator Set From Honeycomb Should Be
+| | ... | ${node} | ${interface} | ${locator_set}
+| | And Honeycomb creates first l2 bridge domain
+| | ... | ${node} | ${bd2_name} | ${bd_settings}
+| | And LISP mappings from Honeycomb should not exist
+| | ... | ${node}
+| | And LISP mappings from VAT should not exist
+| | ... | ${node}
+| | And Honeycomb adds LISP mapping | ${node} | ${lisp_settings_both_vrf}
+| | When Honeycomb adds LISP adjacency | ${node} | ${7} | remote_map_vrf
+| | ... | adj01 | ${vrf_adjacency}
+| | Then Lisp mapping from Honeycomb should be
+| | ... | ${node} | ${adj_subtable}
+
+| TC09: Honeycomb configures Lisp Map Resolver
+| | [Documentation] | Check if Honeycomb can configure a Lisp Map Resolver.
+| | ...
+| | Given LISP state from Honeycomb should be | ${node} | ${state}
+| | And LISP state from VAT should be | ${node} | ${state}
+| | When Honeycomb adds Lisp Map Resolver | ${node} | ${ip_address}
+| | Then Map Resolver from Honeycomb should be | ${node} | ${ip_address}
+| | And Map Resolver from VAT should be | ${node} | ${ip_address}
+
+| TC10: Honeycomb configures Lisp Map Server
+| | [Documentation] | Check if Honeycomb can configure a Lisp Map Server.
+| | ...
+| | Given LISP state from Honeycomb should be | ${node} | ${state}
+| | And LISP state from VAT should be | ${node} | ${state}
+| | When Honeycomb adds Lisp Map Server | ${node} | @{ip_addresses}
+| | Then Map Server from Honeycomb should be | ${node} | @{ip_addresses}
+| | And Map Server from VAT should be | ${node} | @{ip_addresses}
+
+| TC11: Honeycomb configures Lisp PETR configuration
+| | [Documentation] | Check if Honeycomb can configure Lisp
+| | ... | PETR configuration.
+| | ...
+| | Given LISP state from Honeycomb should be | ${node} | ${state}
+| | And LISP state from VAT should be | ${node} | ${state}
+| | When Honeycomb enables LISP PETR feature | ${node} | ${ip_address}
+| | Then PETR configuration from Honeycomb should be | ${node} | ${ip_address}
+| | And PETR configuration from VAT should be | ${node} | enabled
+
+| TC12: Honeycomb configures Lisp RLOC Probing
+| | [Documentation] | Check if Honeycomb can configure Lisp RLOC Probing.
+| | ...
+| | Given LISP state from Honeycomb should be | ${node} | ${state}
+| | And LISP state from VAT should be | ${node} | ${state}
+| | When Honeycomb enables LISP RLOC feature | ${node}
+| | Then RLOC Probing from Honeycomb should be | ${node} | ${True}
+| | And RLOC Probing from VAT should be | ${node} | enabled
+
+| TC13: Honeycomb configures Lisp Map Register
+| | [Documentation] | Check if Honeycomb can configure a Lisp Map Register.
+| | ...
+| | Given LISP state from Honeycomb should be | ${node} | ${state}
+| | And LISP state from VAT should be | ${node} | ${state}
+| | When Honeycomb adds Lisp Map Register | ${node} | ${True}
+| | Then Map Register from Honeycomb should be | ${node} | ${True}
+| | And Map Register from VAT should be | ${node} | enabled
+
+| TC14: Honeycomb enabled Lisp PITR feature
+| | [Documentation] | Check if Honeycomb can configure the Lisp PITR feature.
+| | ...
+| | Given Locator Set From Honeycomb Should Be
+| | ... | ${node} | ${interface} | ${locator_set}
+| | When Honeycomb enables LISP PITR feature | ${node} | ${locator_set}
+| | Then PITR config from Honeycomb should be | ${node} | ${locator_set}
+| | And PITR config from VAT should be | ${node} | ${locator_set}
+
+| TC15: Honeycomb can remove configuration of Lisp features
+| | [Documentation] | Check if Honeycomb can disable all Lisp features.
+| | ...
+| | Given Map resolver from Honeycomb should be | ${node} | ${ip_address}
+| | And PITR config from Honeycomb should be | ${node} | ${locator_set}
+| | When Honeycomb disables all LISP features | ${node}
+| | Then Lisp Should Not Be Configured | ${node}
+
+| TC16: Honeycomb configures Lisp Map Request Mode
+| | [Documentation] | Check if Honeycomb can configure Lisp Map Request mode.
+| | ... | Note: Map Request Mode cannot be removed once configured.
+| | ...
+| | [Teardown] | Honeycomb disables LISP | ${node}
+| | ...
+| | Given Honeycomb enables LISP | ${node}
+| | When Honeycomb sets Lisp Map Request Mode | ${node} | ${True}
+| | Then Map Request Mode from Honeycomb should be
+| | ... | ${node} | source-destination
+| | And Map Request Mode from VAT should be | ${node} | src-dst