aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/func/honeycomb/mgmt-cfg-routing-apihc-apivat-func.robot
diff options
context:
space:
mode:
Diffstat (limited to 'tests/vpp/func/honeycomb/mgmt-cfg-routing-apihc-apivat-func.robot')
-rw-r--r--tests/vpp/func/honeycomb/mgmt-cfg-routing-apihc-apivat-func.robot233
1 files changed, 0 insertions, 233 deletions
diff --git a/tests/vpp/func/honeycomb/mgmt-cfg-routing-apihc-apivat-func.robot b/tests/vpp/func/honeycomb/mgmt-cfg-routing-apihc-apivat-func.robot
deleted file mode 100644
index 540093fe07..0000000000
--- a/tests/vpp/func/honeycomb/mgmt-cfg-routing-apihc-apivat-func.robot
+++ /dev/null
@@ -1,233 +0,0 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.honeycomb.Routing.RoutingKeywords
-| Library | resources.libraries.python.Trace
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/ip/ip4.robot
-| Resource | resources/libraries/robot/ip/ip6.robot
-| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
-| Resource | resources/libraries/robot/honeycomb/interfaces.robot
-| Resource | resources/libraries/robot/honeycomb/routing.robot
-| ...
-| Test Setup | Clear Packet Trace on All DUTs | ${nodes}
-| ...
-| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node}
-| ...
-| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node}
-| ...
-| Test Teardown | Honeycomb routing test teardown | ${node} | ${table}
-| ...
-| Documentation | *Honeycomb routing test suite.*
-| ...
-| Force Tags | HC_FUNC
-
-*** Test Cases ***
-| TC01: Single hop IPv4 route
-| | [Documentation]
-| | ... | [Top] TG=DUT1=TG.
-| | ... | [Enc] Eth-IPv4-ICMP.
-| | ... | [Cfg] (Using Honeycomb API) On DUT1 add ARP entries to both TG\
-| | ... | interfaces and configure route with TG-if2 as next-hop.
-| | ... | [Ver] Send ICMP packet from first TG interface to configured route
-| | ... | destination. Receive packet on the second TG interface.
-| | ...
-| | ${table}= | Set Variable | table1
-| | Given Setup interfaces and neighbors for IPv4 routing test
-| | When Honeycomb configures routing table
-| | ... | ${node} | table1 | ipv4 | ${table1} | ${1}
-| | Then Routing data from Honeycomb should contain
-| | ... | ${node} | table1 | ipv4 | ${table1_oper}
-| | And Verify route IPv4 | ${nodes['TG']}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-
-| TC02: Multi hop IPv4 route
-| | [Documentation]
-| | ... | [Top] TG=DUT1=TG.
-| | ... | [Enc] Eth-IPv4-ICMP.
-| | ... | [Cfg] (Using Honeycomb API) On DUT1 add ARP entries to both TG\
-| | ... | interfaces and configure two routes through the second DUT interface.
-| | ... | [Ver] Send 100 ICMP packets from first TG interface to configured
-| | ... | route destination. Receive all packets on the second TG interface and\
-| | ... | verify that each destination MAC was used by exactly 50 packets.
-| | ... | Receive packet on the second TG interface.
-| | ...
-| | ${table}= | Set Variable | table2
-| | Given Setup interfaces and neighbors for IPv4 routing test
-| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2}
-| | ... | ${next_hop1} | ${next_hop_mac1}
-| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2}
-| | ... | ${next_hop2} | ${next_hop_mac2}
-| | When Honeycomb configures routing table
-| | ... | ${node} | table2 | ipv4 | ${table2} | ${1}
-| | Then Routing data from Honeycomb should contain
-| | ... | ${node} | table2 | ipv4 | ${table2_oper}
-| | And Verify multipath Route | ${nodes['TG']}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | ${dut_to_tg_if2_mac} | ${next_hop_mac1} | ${next_hop_mac2}
-
-| TC03: Special hop - blackhole IPv4 route
-| | [Documentation]
-| | ... | [Top] TG=DUT1=TG.
-| | ... | [Enc] Eth-IPv4-ICMP.
-| | ... | [Cfg] (Using Honeycomb API) On DUT1 add ARP entries to both TG\
-| | ... | interfaces and configure route with special rule blackhole.
-| | ... | [Ver] Send ICMP packet from first TG interface to configured route
-| | ... | destination. Make sure no packet is received on the second TG\
-| | ... | interface.
-| | ...
-| | ${table}= | Set Variable | table3
-| | Given Setup interfaces and neighbors for IPv4 routing test
-| | When Honeycomb configures routing table
-| | ... | ${node} | table3 | ipv4 | ${table3} | ${1} | special=${TRUE}
-| | Then Routing data from Honeycomb should contain
-| | ... | ${node} | table3 | ipv4 | ${table3_oper}
-| | And Run keyword and Expect Error | ICMP echo Rx timeout
-| | ... | Verify route IPv4 | ${nodes['TG']}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-
-| TC04: Single hop IPv6 route
-| | [Documentation]
-| | ... | [Top] TG=DUT1=TG.
-| | ... | [Enc] Eth-IPv6-ICMPv6.
-| | ... | [Cfg] (Using Honeycomb API) On DUT1 add ARP entries to both TG\
-| | ... | interfaces and configure route with TG-if2 as next-hop.
-| | ... | [Ver] Send ICMP packet from first TG interface to configured route
-| | ... | destination. Receive packet on the second TG interface.
-| | ...
-| | ${table}= | Set Variable | table4
-| | Given Setup interfaces and neighbors for IPv6 routing test
-| | When Honeycomb configures routing table
-| | ... | ${node} | table4 | ipv6 | ${table4} | ${1}
-| | Then Routing data from Honeycomb should contain
-| | ... | ${node} | table4 | ipv6 | ${table4_oper}
-| | And Verify route IPv6 | ${nodes['TG']}
-| | ... | ${src_ip} | ${next_hop}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-
-| TC05: Multi hop IPv6 route
-| | [Documentation]
-| | ... | [Top] TG=DUT1=TG.
-| | ... | [Enc] Eth-IPv6-ICMPv6.
-| | ... | [Cfg] (Using Honeycomb API) On DUT1 add ARP entries to both TG\
-| | ... | interfaces and configure two routes through the second DUT interface.
-| | ... | [Ver] Send 100 ICMP packets from first TG interface to configured
-| | ... | route destination. Receive all packets on the second TG interface and\
-| | ... | verify that each destination MAC was used by exactly 50 packets.
-| | ... | Receive packet on the second TG interface.
-| | ...
-| | ${table}= | Set Variable | table5
-| | Given Setup interfaces and neighbors for IPv6 routing test
-| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2}
-| | ... | ${next_hop1} | ${next_hop_mac1}
-| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2}
-| | ... | ${next_hop2} | ${next_hop_mac2}
-| | When Honeycomb configures routing table
-| | ... | ${node} | table5 | ipv6 | ${table5} | ${1}
-| | Then Routing data from Honeycomb should contain
-| | ... | ${node} | table5 | ipv6 | ${table5_oper}
-| | And Verify multipath Route | ${nodes['TG']}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | ${dut_to_tg_if2_mac} | ${next_hop_mac1} | ${next_hop_mac2}
-
-| TC06: Special hop - blackhole IPv6 route
-| | [Documentation]
-| | ... | [Top] TG=DUT1=TG.
-| | ... | [Enc] Eth-IPv6-ICMPv6.
-| | ... | [Cfg] (Using Honeycomb API) On DUT1 add ARP entries to both TG\
-| | ... | interfaces and configure route with special rule blackhole.
-| | ... | [Ver] Send ICMP packet from first TG interface to configured route
-| | ... | destination. Make sure no packet is received on the second TG\
-| | ... | interface.
-| | ...
-# HC2VPP-254 Operational data for Blackhole IPv6 route is incorrect
-| | [Tags] | EXPECTED_FAILING
-| | ${table}= | Set Variable | table6
-| | Given Setup interfaces and neighbors for IPv6 routing test
-| | When Honeycomb configures routing table
-| | ... | ${node} | table6 | ipv6 | ${table6} | ${1} | special=${TRUE}
-| | Then Routing data from Honeycomb should contain
-| | ... | ${node} | table6 | ipv6 | ${table6_oper}
-| | And Run keyword and Expect Error | ICMP echo Rx timeout
-| | ... | Verify route IPv6 | ${nodes['TG']}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-
-*** Keywords ***
-| Setup interfaces and neighbors for IPv4 routing test
-| | Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | Import Variables | resources/test_data/honeycomb/routing.py
-| | ... | ${nodes['DUT1']} | ipv4 | ${dut_to_tg_if2}
-| | Setup vrf IDs | ${dut_node} | ${dut_to_tg_if1} | ${1}
-| | Setup vrf IDs | ${dut_node} | ${dut_to_tg_if2} | ${1}
-| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up
-| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up
-| | Honeycomb sets interface IPv4 address with prefix | ${dut_node}
-| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_len}
-| | Honeycomb sets interface IPv4 address with prefix | ${dut_node}
-| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_len}
-| | Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if1}
-| | ... | ${src_ip} | ${tg_to_dut_if1_mac}
-| | Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2}
-| | ... | ${next_hop} | ${tg_to_dut_if2_mac}
-
-| Setup interfaces and neighbors for IPv6 routing test
-| | Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | Import Variables | resources/test_data/honeycomb/routing.py
-| | ... | ${nodes['DUT1']} | ipv6 | ${dut_to_tg_if2}
-| | Honeycomb sets interface VRF ID
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${1} | ipv6
-| | Honeycomb sets interface VRF ID
-| | ... | ${dut_node} | ${dut_to_tg_if2} | ${1} | ipv6
-| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up
-| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up
-| | Honeycomb sets interface IPv6 address | ${dut_node}
-| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_len}
-| | Honeycomb sets interface IPv6 address | ${dut_node}
-| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_len}
-| | Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if1}
-| | ... | ${src_ip} | ${tg_to_dut_if1_mac}
-| | Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2}
-| | ... | ${next_hop} | ${tg_to_dut_if2_mac}
-| | Vpp all ra suppress link layer | ${nodes}
-
-| Honeycomb routing test teardown
-| | ...
-| | [arguments] | ${node} | ${routing_table}
-| | ...
-| | Show Packet Trace on All DUTs | ${nodes}
-| | Log routing configuration from VAT | ${node}
-| | Honeycomb removes routing configuration | ${node} | ${routing_table}
-
-| Setup vrf IDs
-| | ...
-| | [Arguments] | ${node} | ${interface} | ${vrf}
-| | ...
-| | Honeycomb sets interface VRF ID
-| | ... | ${node} | ${interface} | ${vrf} | ipv4
-| | Honeycomb sets interface VRF ID
-| | ... | ${node} | ${interface} | ${vrf} | ipv6 \ No newline at end of file