diff options
Diffstat (limited to 'tests/vpp/func/ip4')
3 files changed, 0 insertions, 373 deletions
diff --git a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4dhcpclient-func.robot b/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4dhcpclient-func.robot deleted file mode 100644 index 3dbb2abb11..0000000000 --- a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4dhcpclient-func.robot +++ /dev/null @@ -1,119 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.Trace -| ... -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/features/dhcp_client.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| ... -| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO | SKIP_VPP_PATCH -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | DHCPv4 Client related test cases - -*** Variables *** -| ${client_hostname}= | dhcp-client -| ${client_ip}= | 192.168.23.10 -| ${client_mask}= | 255.255.255.0 -| ${server_ip}= | 192.168.23.1 -| ${own_xid}= | 11112222 -| ${lease_time}= | ${15} - -*** Test Cases *** -| TC01: VPP sends a DHCP DISCOVER -| | [Documentation] | Configure DHCPv4 client on interface to TG without -| | ... | hostname and check if DHCPv4 DISCOVER message contains all -| | ... | required fields with expected values. -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | When Set DHCP client on Interface | ${dut_node} | ${dut_to_tg_if1} -| | Then Verify DHCP DISCOVER header | ${tg_node} -| | ... | ${tg_to_dut_if1} | ${dut_to_tg_if1_mac} - -| TC02: VPP sends a DHCPv4 DISCOVER with hostname -| | [Documentation] | Configure DHCPv4 client on interface to TG with hostname -| | ... | and check if DHCPv4 DISCOVER message contains all required -| | ... | fields with expected values. -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | When Set DHCP client on Interface | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${client_hostname} -| | Then Verify DHCP DISCOVER header | ${tg_node} -| | ... | ${tg_to_dut_if1} | ${dut_to_tg_if1_mac} | ${client_hostname} - -| TC03: VPP sends DHCPv4 REQUEST after OFFER -| | [Documentation] | Configure DHCPv4 client on interface to TG and check if -| | ... | DHCPv4 REQUEST message contains all required fields. -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | And VPP Route Add | ${dut_node} | 255.255.255.255 | 32 | local=${TRUE} -| | When Set DHCP client on Interface | ${dut_node} | ${dut_to_tg_if1} -| | Then Verify DHCP REQUEST after OFFER | ${tg_node} | ${tg_to_dut_if1} -| | ... | ${tg_to_dut_if1_mac} | ${server_ip} -| | ... | ${dut_to_tg_if1_mac} | ${client_ip} | ${client_mask} - -| TC04: VPP doesn't send DHCPv4 REQUEST after OFFER with wrong XID -| | [ Tags ] | EXPECTED_FAILING -| | [Documentation] | Configure DHCPv4 client on interface to TG. If server -| | ... | sends DHCPv4 OFFER with different XID as in DHCPv4 -| | ... | DISCOVER, DHCPv4 REQUEST message shouldn't be sent. -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | And VPP Route Add | ${dut_node} | 255.255.255.255 | 32 | local=${TRUE} -| | When Set DHCP client on Interface | ${dut_node} | ${dut_to_tg_if1} -| | Then Run Keyword And Expect Error | DHCP REQUEST Rx timeout -| | ... | Verify DHCP REQUEST after OFFER | ${tg_node} | ${tg_to_dut_if1} -| | ... | ${tg_to_dut_if1_mac} | ${server_ip} -| | ... | ${dut_to_tg_if1_mac} | ${client_ip} | ${client_mask} -| | ... | offer_xid=${own_xid} - -| TC05: VPP honors DHCPv4 lease time -| | [Documentation] | Send IP configuration to the VPP client via DHCPv4. -| | ... | Address is checked with ICMP echo request and there should -| | ... | be no reply for echo request when lease has expired. -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | And VPP Route Add | ${dut_node} | 255.255.255.255 | 32 | local=${TRUE} -| | When Set DHCP client on Interface | ${dut_node} | ${dut_to_tg_if1} -| | And Configure IP on client via DHCP -| | ... | ${tg_node} | ${tg_to_dut_if1} -| | ... | ${tg_to_dut_if1_mac} | ${server_ip} -| | ... | ${client_ip} | ${client_mask} -| | ... | ${lease_time} -| | And VPP Add IP Neighbor | ${dut_node} | ${dut_to_tg_if1} | ${server_ip} -| | ... | ${tg_to_dut_if1_mac} -| | Then Send ICMP echo request and verify answer -| | ... | ${tg_node} | ${tg_to_dut_if1} -| | ... | ${dut_to_tg_if1_mac} | ${tg_to_dut_if1_mac} | ${client_ip} -| | ... | ${server_ip} -| | And Sleep | ${lease_time} -| | And Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP echo request and verify answer | ${tg_node} -| | ... | ${tg_to_dut_if1} | ${dut_to_tg_if1_mac} | ${tg_to_dut_if1_mac} -| | ... | ${client_ip} | ${server_ip} diff --git a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4dhcpproxy-func.robot b/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4dhcpproxy-func.robot deleted file mode 100644 index 24514d018b..0000000000 --- a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4dhcpproxy-func.robot +++ /dev/null @@ -1,96 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.Trace -| ... -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/features/dhcp_proxy.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| ... -| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO | SKIP_VPP_PATCH -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *DHCPv4 proxy test cases* -| ... -| ... | *[Top] Network Topologies:* TG = DUT -| ... | with two links between the nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP-BOOTP-DHCP -| ... | *[Cfg] DUT configuration:* DUT is configured with DHCPv4 proxy. -| ... | *[Ver] TG verification:* Test DHCPv4 packets are sent -| ... | on TG on first link to DUT and received on TG on second link. -| ... | On receive TG verifies if DHCPv4 packets are valid. - -*** Variables *** -| ${dut_to_tg_if1_ip}= | 172.16.0.1 -| ${dut_to_tg_if2_ip}= | 192.168.0.1 -| ${dhcp_server_ip}= | 192.168.0.100 -| ${client_ip}= | 172.16.0.2 -| ${prefix_length}= | 24 - -| ${discover_src_ip}= | 0.0.0.0 -| ${valid_discover_dst_ip}= | 255.255.255.255 -| ${invalid_discover_dst_ip}= | 255.255.255.1 - -*** Test Cases *** -| TC01: VPP proxies valid DHCPv4 request to DHCPv4 server -| | [Documentation] | -| | ... | [Top] TG=DUT \ -| | ... | [Enc] Eth-IPv4-UDP-BOOTP-DHCP -| | ... | [Cfg] On DUT setup DHCPv4 proxy. -| | ... | [Ver] Make TG verify matching DHCPv4 packets between client and DHCPv4 -| | ... | server through DHCP proxy. -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | And VPP Route Add | ${dut_node} | 255.255.255.255 | 32 | local=${True} -| | And VPP Interface Set IP Address | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} -| | And VPP Interface Set IP Address | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} -| | And VPP Add IP Neighbor | ${dut_node} | ${dut_to_tg_if2} | ${dhcp_server_ip} -| | ... | ${tg_to_dut_if2_mac} -| | When DHCP Proxy Config | ${dut_node} | ${dhcp_server_ip} -| | ... | ${dut_to_tg_if1_ip} -| | Then Send DHCP messages and check answer | ${tg_node} | ${tg_to_dut_if1} -| | ... | ${tg_to_dut_if2} | ${dhcp_server_ip} | ${tg_to_dut_if2_mac} -| | ... | ${client_ip} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_ip} - -| TC02: VPP proxy ignores invalid DHCPv4 request -| | [Documentation] | -| | ... | [Top] TG=DUT \ -| | ... | [Enc] Eth-IPv4-UDP-BOOTP-DHCP -| | ... | [Cfg] On DUT setup DHCPv4 proxy. -| | ... | [Ver] Make TG verify matching invalid DHCPv4 packets are dropped. -| | ... -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | And VPP Route Add | ${dut_node} | 255.255.255.255 | 32 | local=${True} -| | And VPP Interface Set IP Address | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length} -| | And VPP Interface Set IP Address | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length} -| | And VPP Add IP Neighbor | ${dut_node} | ${dut_to_tg_if2} | ${dhcp_server_ip} -| | ... | ${tg_to_dut_if2_mac} -| | When DHCP Proxy Config | ${dut_node} | ${dhcp_server_ip} -| | ... | ${dut_to_tg_if1_ip} -| | Then Send DHCP DISCOVER and check answer | ${tg_node} | ${tg_to_dut_if1} -| | ... | ${tg_to_dut_if2} | ${discover_src_ip} | ${valid_discover_dst_ip} -| | And DHCP DISCOVER should fail | ${tg_node} | ${tg_to_dut_if1} -| | ... | ${tg_to_dut_if2} | ${discover_src_ip} | ${invalid_discover_dst_ip} diff --git a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4proxyarp-func.robot b/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4proxyarp-func.robot deleted file mode 100644 index da1988defe..0000000000 --- a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4proxyarp-func.robot +++ /dev/null @@ -1,158 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.ProxyArp -| Library | resources.libraries.python.Trace -| ... -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| ... -| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | SKIP_VPP_PATCH -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *RFC1027 Proxy ARP test cases* -| ... -| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with -| ... | single link between nodes. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with Proxy ARP -| ... | *[Ver] TG verification:* Test ARP Request packet is sent -| ... | from TG on link to DUT1; on receive TG verifies ARP reply packet -| ... | for correctness and their IPv4 src-addr, dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC1027. - -*** Variables *** -| ${tg_to_dut1_ip}= | 10.0.0.100 -| ${dut1_to_tg_ip}= | 10.0.0.1 -| ${prefix_length}= | 24 -| ${lo_ip4_addr}= | 192.168.1.2 -| ${hi_ip4_addr}= | 192.168.1.10 -| ${pass_test_ip}= | 192.168.1.5 -| ${pass_test_lo_ip}= | 192.168.1.2 -| ${pass_test_hi_ip}= | 192.168.1.10 -| ${fail_test_lo_ip}= | 192.168.1.1 -| ${fail_test_hi_ip}= | 192.168.1.11 - -*** Test Cases *** -| TC01: DUT sends ARP reply on behalf of another machine from the IP range -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC1027. -| | ... | [Cfg] On DUT1 configure interface IPv4 address and proxy ARP -| | ... | for IP range. -| | ... | [Ver] Make TG send ARP request to DUT1 interface, -| | ... | verify if DUT1 sends correct ARP reply on behalf of machine which -| | ... | IP is in range. -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${dut1_to_tg_name}= | Get interface name | ${dut1_node} | ${dut1_to_tg} -| | ${tg_to_dut1_name}= | Get interface name | ${tg_node} | ${tg_to_dut1} -| | When VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And Vpp Add Proxy ARP | ${dut1_node} | ${lo_ip4_addr} | ${hi_ip4_addr} -| | And Vpp Proxy ARP Interface Enable | ${dut1_node} | ${dut1_to_tg_name} -| | Then Send ARP Request | ${tg_node} | ${tg_to_dut1_name} | ${tg_to_dut1_mac} -| | ... | ${dut1_to_tg_mac} | ${tg_to_dut1_ip} | ${pass_test_ip} - -| TC02: DUT sends ARP reply on behalf of another machine from beginning of the IP range -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC1027. -| | ... | [Cfg] On DUT1 configure interface IPv4 address and proxy ARP -| | ... | for IP range. -| | ... | [Ver] Make TG send ARP request to DUT1 interface, -| | ... | verify if DUT1 sends correct ARP reply on behalf of machine which -| | ... | IP is from beginning of the IP range. -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${dut1_to_tg_name}= | Get interface name | ${dut1_node} | ${dut1_to_tg} -| | ${tg_to_dut1_name}= | Get interface name | ${tg_node} | ${tg_to_dut1} -| | When VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And Vpp Add Proxy ARP | ${dut1_node} | ${lo_ip4_addr} | ${hi_ip4_addr} -| | And Vpp Proxy ARP Interface Enable | ${dut1_node} | ${dut1_to_tg_name} -| | Then Send ARP Request | ${tg_node} | ${tg_to_dut1_name} | ${tg_to_dut1_mac} -| | ... | ${dut1_to_tg_mac} | ${tg_to_dut1_ip} | ${pass_test_lo_ip} - -| TC03: DUT sends ARP reply on behalf of another machine from end of the IP range -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC1027. -| | ... | [Cfg] On DUT1 configure interface IPv4 address and proxy ARP -| | ... | for IP range. -| | ... | [Ver] Make TG send ARP request to DUT1 interface, -| | ... | verify if DUT1 sends correct ARP reply on behalf of machine which -| | ... | IP is from end of the IP range. -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${dut1_to_tg_name}= | Get interface name | ${dut1_node} | ${dut1_to_tg} -| | ${tg_to_dut1_name}= | Get interface name | ${tg_node} | ${tg_to_dut1} -| | When VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And Vpp Add Proxy ARP | ${dut1_node} | ${lo_ip4_addr} | ${hi_ip4_addr} -| | And Vpp Proxy ARP Interface Enable | ${dut1_node} | ${dut1_to_tg_name} -| | Then Send ARP Request | ${tg_node} | ${tg_to_dut1_name} | ${tg_to_dut1_mac} -| | ... | ${dut1_to_tg_mac} | ${tg_to_dut1_ip} | ${pass_test_hi_ip} - -| TC04: DUT does not send ARP reply on behalf of another machine from below of the IP range -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC1027. -| | ... | [Cfg] On DUT1 configure interface IPv4 address and proxy ARP -| | ... | for IP range. -| | ... | [Ver] Make TG send ARP request to DUT1 interface, -| | ... | verify if DUT1 does not send ARP reply on behalf of machine which -| | ... | IP is from below of the IP range. -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${dut1_to_tg_name}= | Get interface name | ${dut1_node} | ${dut1_to_tg} -| | ${tg_to_dut1_name}= | Get interface name | ${tg_node} | ${tg_to_dut1} -| | When VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And Vpp Add Proxy ARP | ${dut1_node} | ${lo_ip4_addr} | ${hi_ip4_addr} -| | And Vpp Proxy ARP Interface Enable | ${dut1_node} | ${dut1_to_tg_name} -| | Then ARP request should fail | ${tg_node} | ${tg_to_dut1_name} -| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut1_ip} -| | ... | ${fail_test_lo_ip} - -| TC05: DUT does not send ARP reply on behalf of another machine from above of the IP range -| | [Documentation] -| | ... | [Top] TG-DUT1. -| | ... | [Ref] RFC1027. -| | ... | [Cfg] On DUT1 configure interface IPv4 address and proxy ARP -| | ... | for IP range. -| | ... | [Ver] Make TG send ARP request to DUT1 interface, -| | ... | verify if DUT1 does not send ARP reply on behalf of machine which -| | ... | IP is from above of the IP range. -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${dut1_to_tg_name}= | Get interface name | ${dut1_node} | ${dut1_to_tg} -| | ${tg_to_dut1_name}= | Get interface name | ${tg_node} | ${tg_to_dut1} -| | When VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And Vpp Add Proxy ARP | ${dut1_node} | ${lo_ip4_addr} | ${hi_ip4_addr} -| | And Vpp Proxy ARP Interface Enable | ${dut1_node} | ${dut1_to_tg_name} -| | Then ARP request should fail | ${tg_node} | ${tg_to_dut1_name} -| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut1_ip} -| | ... | ${fail_test_hi_ip} |