diff options
Diffstat (limited to 'tests/vpp/func/ip4')
3 files changed, 0 insertions, 310 deletions
diff --git a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4arp-func.robot b/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4arp-func.robot deleted file mode 100644 index 4f2bcfeb97..0000000000 --- a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4arp-func.robot +++ /dev/null @@ -1,87 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.Trace -| ... -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/l2/l2_xconnect.robot -| Resource | resources/libraries/robot/shared/counters.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| ... -| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | SKIP_VPP_PATCH -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *IPv4 ARP test cases* -| ... -| ... | RFC826 ARP: Eth-IPv4 and Eth-ARP on links TG-DUT1, TG-DUT2, DUT1-DUT2: -| ... | IPv4 ARP tests use 3-node topology TG - DUT1 - DUT2 - TG with one link -| ... | between the nodes. DUT1 and DUT2 are configured with IPv4 routing and -| ... | static routes. DUT ARP functionality is tested by making TG send ICMPv4 -| ... | Echo Requests towards its other interface via DUT1 and DUT2. - -*** Variables *** -| ${dut1_to_tg_ip}= | 192.168.1.1 -| ${dut1_to_dut2_ip}= | 192.168.2.1 -| ${dut1_to_dut2_ip_GW}= | 192.168.2.2 -| ${test_dst_ip}= | 32.0.0.1 -| ${test_src_ip}= | 16.0.0.1 -| ${prefix_length}= | 24 - -*** Test Cases *** -| TC01: DUT sends ARP Request for unresolved locally connected IPv4 address -| | [Documentation] -| | ... | Make TG send test packet destined to IPv4 address of its other\ -| | ... | interface connected to DUT2. Make TG verify DUT2 sends ARP -| | ... | Request for locally connected TG IPv4 address. -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And Configure L2XC -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} -| | When VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length} -| | Then Send packet and verify ARP request | ${tg_node} -| | ... | ${test_src_ip} | ${dut1_to_dut2_ip_GW} | ${tg_to_dut1} -| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac} -| | ... | ${dut1_to_dut2_ip} | ${dut1_to_dut2_ip_GW} - -| TC02: DUT sends ARP Request for route next hop IPv4 address -| | [Documentation] | -| | ... | Make TG send test packet destined to IPv4 address matching\ -| | ... | static route on DUT2. Make TG verify DUT2 sends ARP Request for -| | ... | next hop of the static route. -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And Configure L2XC -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} -| | When VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length} -| | And Vpp Route Add -| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length} -| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2} -| | Then Send packet and verify ARP request | ${tg_node} -| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} -| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac} -| | ... | ${dut1_to_dut2_ip} | ${dut1_to_dut2_ip_GW} diff --git a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4ecmp-func.robot b/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4ecmp-func.robot deleted file mode 100644 index 4738699803..0000000000 --- a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-ip4ecmp-func.robot +++ /dev/null @@ -1,79 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - - -*** Settings *** -| Library | resources.libraries.python.Trace -| ... -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/shared/counters.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| ... -| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO | SKIP_VPP_PATCH -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *Ipv4 Multipath routing test cases* -| ... -| ... | *[Top] Network topologies:* TG=DUT 2-node topology with two links\ -| ... | between nodes. -| ... | *[Cfg] DUT configuration:* On DUT configure interfaces IPv4 adresses,\ -| ... | and multipath routing. -| ... | *[Ver] TG verification:* Test packets are sent from TG on the first\ -| ... | link to DUT. Packet is received on TG on the second link from DUT1. - - -*** Variables *** -| ${ip_1}= | 192.168.1.1 -| ${ip_2}= | 192.168.2.1 -| ${test_dst_ip}= | 32.0.0.1 -| ${test_src_ip}= | 16.0.0.1 -| ${prefix_length}= | 24 -| ${neighbor_1_ip}= | 192.168.2.10 -| ${neighbor_1_mac}= | 02:00:00:00:00:02 -| ${neighbor_2_ip}= | 192.168.2.20 -| ${neighbor_2_mac}= | 02:00:00:00:00:03 - -*** Test Cases *** -| TC01: IPv4 Equal-cost multipath routing -| | [Documentation] -| | ... | [Top] TG=DUT -| | ... | [Cfg] On DUT configure multipath routing wiht two equal-cost paths. -| | ... | [Ver] TG sends 100 IPv4 ICMP packets traffic on the first link to\ -| | ... | DUT. On second link to TG verify if traffic is divided into two paths. -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | And VPP Interface Set IP Address | ${dut_node} -| | ... | ${dut_to_tg_if2} | ${ip_1} | ${prefix_length} -| | And VPP Interface Set IP Address | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${ip_2} | ${prefix_length} -| | And VPP Add IP Neighbor -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${neighbor_1_ip} | ${neighbor_1_mac} -| | And VPP Add IP Neighbor -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${neighbor_2_ip} | ${neighbor_2_mac} -| | When Vpp Route Add | ${dut_node} | ${test_dst_ip} | ${prefix_length} -| | ... | gateway=${neighbor_1_ip} | interface=${dut_to_tg_if1} -| | ... | multipath=${TRUE} -| | And Vpp Route Add | ${dut_node} | ${test_dst_ip} | ${prefix_length} -| | ... | gateway=${neighbor_2_ip} | interface=${dut_to_tg_if1} -| | ... | multipath=${TRUE} -| | Then Send packets and verify multipath routing | ${tg_node} -| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1} | ${test_src_ip} | ${test_dst_ip} -| | ... | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac} | ${dut_to_tg_if1_mac} -| | ... | ${neighbor_1_mac} | ${neighbor_2_mac} diff --git a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-rpf-func.robot b/tests/vpp/func/ip4/eth2p-ethip4-ip4base-rpf-func.robot deleted file mode 100644 index c98a05b344..0000000000 --- a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-rpf-func.robot +++ /dev/null @@ -1,144 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.Trace -| ... -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/l2/l2_xconnect.robot -| Resource | resources/libraries/robot/shared/counters.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| ... -| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *Source RPF check on IPv4 test cases* -| ... -| ... | *[Top] Network Topologies:* TG - DUT1 - DUT2 - TG -| ... | with one link between the nodes. -| ... | *[Cfg] DUT configuration:* DUT2 is configured with L2 Cross connect. -| ... | DUT1 is configured with IP source check on link to TG, -| ... | *[Ver] TG verification:* Test ICMP Echo Request packets are sent -| ... | in one direction by TG on link to DUT1 and received on TG link -| ... | to DUT2. On receive TG verifies if packets which source address -| ... | is not in routes are dropped. - -*** Variables *** -| ${dut1_to_tg_ip}= | 192.168.1.1 -| ${dut1_to_tg_ip_GW}= | 192.168.1.2 -| ${dut1_to_dut2_ip}= | 192.168.2.1 -| ${dut1_to_dut2_ip_GW}= | 192.168.2.2 -| ${test_dst_ip}= | 32.0.0.1 -| ${pass_test_src_ip}= | 16.0.0.1 -| ${drop_test_src_ip}= | 24.0.0.1 -| ${prefix_length}= | 24 - -*** Test Cases *** -| TC01: VPP source RPF check on IPv4 src-addr -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG -| | ... | [Cfg] On DUT1 setup IP source check. -| | ... | [Ver] Make TG verify matching packets which source address -| | ... | is not in routes are dropped. -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length} -| | And VPP Add IP Neighbor -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW} -| | ... | ${tg_to_dut2_mac} -| | And Vpp Route Add -| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length} -| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2} -| | ... | resolve_attempts=${NONE} -| | And VPP Add IP Neighbor -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip_GW} -| | ... | ${tg_to_dut1_mac} -| | And Vpp Route Add -| | ... | ${dut1_node} | ${pass_test_src_ip} | ${prefix_length} -| | ... | gateway=${dut1_to_tg_ip_GW} | interface=${dut1_to_tg} -| | ... | resolve_attempts=${NONE} -| | And Configure L2XC -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} -| | Then Send packet and verify headers | ${tg_node} -| | ... | ${pass_test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} -| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2} -| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers | ${tg_node} -| | ... | ${drop_test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} -| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2} -| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} -| | ${dut1_to_tg_name}= | Get Interface Name | ${dut1_node} | ${dut1_to_tg} -| | When VPP IP Source Check Setup | ${dut1_node} | ${dut1_to_tg_name} -| | Then Send packet and verify headers | ${tg_node} -| | ... | ${pass_test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} -| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2} -| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers | ${tg_node} -| | ... | ${dut1_to_tg_ip_GW} | ${test_dst_ip} | ${tg_to_dut1} -| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2} -| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} -| | And Packet transmission from port to port should fail | ${tg_node} -| | ... | ${drop_test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} -| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2} -| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} - -| TC02: VPP pass traffic on non-enabled RPF interface -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG -| | ... | [Cfg] On DUT1 setup IP source check. -| | ... | [Ver] Make TG verify matching packets on non-enabled RPF interface -| | ... | are passed. -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length} -| | And VPP Add IP Neighbor -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW} -| | ... | ${tg_to_dut2_mac} -| | And Vpp Route Add -| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length} -| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2} -| | ... | resolve_attempts=${NONE} -| | And VPP Add IP Neighbor -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip_GW} -| | ... | ${tg_to_dut1_mac} -| | And Vpp Route Add -| | ... | ${dut1_node} | ${pass_test_src_ip} | ${prefix_length} -| | ... | gateway=${dut1_to_tg_ip_GW} | interface=${dut1_to_tg} -| | ... | resolve_attempts=${NONE} -| | And Configure L2XC -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} -| | ${dut1_to_tg_name}= | Get Interface Name | ${dut1_node} | ${dut1_to_tg} -| | When VPP IP Source Check Setup | ${dut1_node} | ${dut1_to_tg_name} -| | Then Send packet and verify headers | ${tg_node} -| | ... | ${test_dst_ip} | ${pass_test_src_ip} | ${tg_to_dut2} -| | ... | ${tg_to_dut2_mac} | ${dut1_to_dut2_mac} | ${tg_to_dut1} -| | ... | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} -| | And Send packet and verify headers | ${tg_node} -| | ... | ${test_dst_ip} | ${dut1_to_tg_ip_GW} | ${tg_to_dut2} -| | ... | ${tg_to_dut2_mac} | ${dut1_to_dut2_mac} | ${tg_to_dut1} -| | ... | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} |