diff options
Diffstat (limited to 'tests/vpp/func/ip4_tunnels/vxlan/eth2p-dot1qip4vxlan-l2bdbasemaclrn-func.robot')
-rw-r--r-- | tests/vpp/func/ip4_tunnels/vxlan/eth2p-dot1qip4vxlan-l2bdbasemaclrn-func.robot | 74 |
1 files changed, 74 insertions, 0 deletions
diff --git a/tests/vpp/func/ip4_tunnels/vxlan/eth2p-dot1qip4vxlan-l2bdbasemaclrn-func.robot b/tests/vpp/func/ip4_tunnels/vxlan/eth2p-dot1qip4vxlan-l2bdbasemaclrn-func.robot new file mode 100644 index 0000000000..e4c8c25f0a --- /dev/null +++ b/tests/vpp/func/ip4_tunnels/vxlan/eth2p-dot1qip4vxlan-l2bdbasemaclrn-func.robot @@ -0,0 +1,74 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/shared/testing_path.robot +| Resource | resources/libraries/robot/overlay/vxlan.robot +| Resource | resources/libraries/robot/l2/l2_traffic.robot +| Library | resources.libraries.python.Trace +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV +| Test Setup | Set up functional test +| Test Teardown | Tear down functional test +| Documentation | *RFC7348 VXLAN: Bridge-domain with VXLAN over VLAN test cases* +| ... +| ... | *[Top] Network topologies:* TG-DUT1-DUT2-TG 3-node circular topology with +| ... | single links between nodes. +| ... | *[Enc] Packet encapsulations:* Eth-dot1q-IPv4-VXLAN-Eth-IPv4-ICMPv4 on +| ... | DUT1-DUT2, Eth-dot1q-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 +| ... | bridge-domain (L2BD) switching combined with static MACs, MAC learning +| ... | enabled and Split Horizon Groups (SHG) depending on test case; VXLAN +| ... | tunnels are configured between L2BDs on DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are +| ... | sent in both directions by TG on links to DUT1 and DUT2; on receive TG +| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr and +| ... | MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC7348. + +*** Variables *** +| ${VNI}= | 23 +| ${BID}= | 23 +| ${VLAN}= | 10 + +*** Test Cases *** +| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv4oVLAN tunnels switch ICMPv4 between TG links +| | [Tags] | EXPECTED_FAILING +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-VXLAN-Eth-IPv4-ICMPv4 on\ +| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 and DUT2 +| | ... | configure L2 bridge-domain (MAC learning enabled), each with one +| | ... | interface to TG and one VXLAN tunnel interface towards the other DUT +| | ... | over VLAN sub-interface. [Ver] Make TG send ICMPv4 Echo Req between +| | ... | two of its interfaces, verify all packets are received. [Ref] RFC7348. +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | And Create vlan interfaces for VXLAN | ${VLAN} +| | ... | ${dut1_node} | ${dut1_to_dut2} +| | ... | ${dut2_node} | ${dut2_to_dut1} +| | And Configure IP addresses and neighbors on interfaces +| | ... | ${dut1_node} | ${dut1s_vlan_name} | ${dut1s_vlan_index} +| | ... | ${dut2_node} | ${dut2s_vlan_name} | ${dut2s_vlan_index} +| | ${dut1s_vxlan}= | When Create VXLAN interface | ${dut1_node} | ${VNI} +| | | ... | ${dut1s_ip_address} | ${dut2s_ip_address} +| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan} | up +| | And Add interfaces to L2BD | ${dut1_node} | ${BID} +| | ... | ${dut1_to_tg} | ${dut1s_vxlan} +| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${VNI} +| | | ... | ${dut2s_ip_address} | ${dut1s_ip_address} +| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan} | up +| | And Add interfaces to L2BD | ${dut2_node} | ${BID} +| | ... | ${dut2_to_tg} | ${dut2s_vxlan} +| | Then Send ICMPv4 bidirectionally and verify received packets +| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} |