aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/func/ip4_tunnels/vxlan
diff options
context:
space:
mode:
Diffstat (limited to 'tests/vpp/func/ip4_tunnels/vxlan')
-rw-r--r--tests/vpp/func/ip4_tunnels/vxlan/eth2p-dot1qip4vxlan-l2bdbasemaclrn-func.robot74
-rw-r--r--tests/vpp/func/ip4_tunnels/vxlan/eth2p-ethip4vxlan-l2bdbasemaclrn-func.robot78
-rw-r--r--tests/vpp/func/ip4_tunnels/vxlan/eth2p-ethip4vxlan-l2xcbase-func.robot66
-rw-r--r--tests/vpp/func/ip4_tunnels/vxlan/eth4p-ethip4vxlan-l2bdbasemaclrn-l2shg-func.robot200
4 files changed, 418 insertions, 0 deletions
diff --git a/tests/vpp/func/ip4_tunnels/vxlan/eth2p-dot1qip4vxlan-l2bdbasemaclrn-func.robot b/tests/vpp/func/ip4_tunnels/vxlan/eth2p-dot1qip4vxlan-l2bdbasemaclrn-func.robot
new file mode 100644
index 0000000000..e4c8c25f0a
--- /dev/null
+++ b/tests/vpp/func/ip4_tunnels/vxlan/eth2p-dot1qip4vxlan-l2bdbasemaclrn-func.robot
@@ -0,0 +1,74 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/overlay/vxlan.robot
+| Resource | resources/libraries/robot/l2/l2_traffic.robot
+| Library | resources.libraries.python.Trace
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV
+| Test Setup | Set up functional test
+| Test Teardown | Tear down functional test
+| Documentation | *RFC7348 VXLAN: Bridge-domain with VXLAN over VLAN test cases*
+| ...
+| ... | *[Top] Network topologies:* TG-DUT1-DUT2-TG 3-node circular topology with
+| ... | single links between nodes.
+| ... | *[Enc] Packet encapsulations:* Eth-dot1q-IPv4-VXLAN-Eth-IPv4-ICMPv4 on
+| ... | DUT1-DUT2, Eth-dot1q-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
+| ... | bridge-domain (L2BD) switching combined with static MACs, MAC learning
+| ... | enabled and Split Horizon Groups (SHG) depending on test case; VXLAN
+| ... | tunnels are configured between L2BDs on DUT1 and DUT2.
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are
+| ... | sent in both directions by TG on links to DUT1 and DUT2; on receive TG
+| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr and
+| ... | MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC7348.
+
+*** Variables ***
+| ${VNI}= | 23
+| ${BID}= | 23
+| ${VLAN}= | 10
+
+*** Test Cases ***
+| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv4oVLAN tunnels switch ICMPv4 between TG links
+| | [Tags] | EXPECTED_FAILING
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-VXLAN-Eth-IPv4-ICMPv4 on\
+| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 and DUT2
+| | ... | configure L2 bridge-domain (MAC learning enabled), each with one
+| | ... | interface to TG and one VXLAN tunnel interface towards the other DUT
+| | ... | over VLAN sub-interface. [Ver] Make TG send ICMPv4 Echo Req between
+| | ... | two of its interfaces, verify all packets are received. [Ref] RFC7348.
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | And Create vlan interfaces for VXLAN | ${VLAN}
+| | ... | ${dut1_node} | ${dut1_to_dut2}
+| | ... | ${dut2_node} | ${dut2_to_dut1}
+| | And Configure IP addresses and neighbors on interfaces
+| | ... | ${dut1_node} | ${dut1s_vlan_name} | ${dut1s_vlan_index}
+| | ... | ${dut2_node} | ${dut2s_vlan_name} | ${dut2s_vlan_index}
+| | ${dut1s_vxlan}= | When Create VXLAN interface | ${dut1_node} | ${VNI}
+| | | ... | ${dut1s_ip_address} | ${dut2s_ip_address}
+| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan} | up
+| | And Add interfaces to L2BD | ${dut1_node} | ${BID}
+| | ... | ${dut1_to_tg} | ${dut1s_vxlan}
+| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${VNI}
+| | | ... | ${dut2s_ip_address} | ${dut1s_ip_address}
+| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan} | up
+| | And Add interfaces to L2BD | ${dut2_node} | ${BID}
+| | ... | ${dut2_to_tg} | ${dut2s_vxlan}
+| | Then Send ICMPv4 bidirectionally and verify received packets
+| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
diff --git a/tests/vpp/func/ip4_tunnels/vxlan/eth2p-ethip4vxlan-l2bdbasemaclrn-func.robot b/tests/vpp/func/ip4_tunnels/vxlan/eth2p-ethip4vxlan-l2bdbasemaclrn-func.robot
new file mode 100644
index 0000000000..32014e5985
--- /dev/null
+++ b/tests/vpp/func/ip4_tunnels/vxlan/eth2p-ethip4vxlan-l2bdbasemaclrn-func.robot
@@ -0,0 +1,78 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/overlay/vxlan.robot
+| Resource | resources/libraries/robot/l2/l2_traffic.robot
+| Resource | resources/libraries/robot/vm/qemu.robot
+| Resource | resources/libraries/robot/vm/double_qemu_setup.robot
+| Library | resources.libraries.python.Trace
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV
+| Test Setup | Set up functional test
+| Test Teardown | Tear down functional test
+| Documentation | *Bridge-domain with VXLAN test cases - IPv4*
+| ...
+| ... | *[Top] Network topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet encapsulations:* Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on
+| ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
+| ... | bridge-domain (L2BD) switching combined with MAC learning enabled;
+| ... | VXLAN tunnels are configured between L2BDs on DUT1 and DUT2.
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent
+| ... | in both directions by TG on links to DUT1 and DUT2; on receive TG
+| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr
+| ... | and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC7348.
+
+*** Variables ***
+| ${vni_1}= | 23
+| ${vni_2}= | 35
+
+| ${bd_id1}= | 10
+| ${bd_id2}= | 20
+| ${bd_id3}= | 30
+| ${shg1}= | 1
+| ${shg2}= | 2
+
+| ${ip4_addr1}= | 172.16.0.1
+| ${ip4_addr2}= | 172.16.0.2
+| ${ip4_prefix}= | 24
+
+*** Test Cases ***
+| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv4 tunnels switch ICMPv4 between TG links
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \
+| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 and DUT2
+| | ... | configure two i/fs into L2BD with MAC learning. [Ver] Make TG
+| | ... | verify ICMPv4 Echo Req pkts are switched thru DUT1 and DUT2 in
+| | ... | both directions and are correct on receive. [Ref] RFC7348.
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | ${dut1_to_dut2_name}= | Get interface name | ${dut1_node} | ${dut1_to_dut2}
+| | ${dut2_to_dut1_name}= | Get interface name | ${dut2_node} | ${dut2_to_dut1}
+| | And Configure IP addresses and neighbors on interfaces | ${dut1_node} | ${dut1_to_dut2_name} | ${NONE}
+| | ... | ${dut2_node} | ${dut2_to_dut1_name} | ${NONE}
+| | ${dut1s_vxlan}= | When Create VXLAN interface | ${dut1_node} | ${vni_1}
+| | | ... | ${dut1s_ip_address} | ${dut2s_ip_address}
+| | And Add interfaces to L2BD | ${dut1_node} | ${bd_id1}
+| | ... | ${dut1_to_tg} | ${dut1s_vxlan}
+| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${vni_1}
+| | | ... | ${dut2s_ip_address} | ${dut1s_ip_address}
+| | And Add interfaces to L2BD | ${dut2_node} | ${bd_id1}
+| | ... | ${dut2_to_tg} | ${dut2s_vxlan}
+| | Then Send ICMPv4 bidirectionally and verify received packets
+| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
diff --git a/tests/vpp/func/ip4_tunnels/vxlan/eth2p-ethip4vxlan-l2xcbase-func.robot b/tests/vpp/func/ip4_tunnels/vxlan/eth2p-ethip4vxlan-l2xcbase-func.robot
new file mode 100644
index 0000000000..aa88be5731
--- /dev/null
+++ b/tests/vpp/func/ip4_tunnels/vxlan/eth2p-ethip4vxlan-l2xcbase-func.robot
@@ -0,0 +1,66 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/overlay/vxlan.robot
+| Resource | resources/libraries/robot/l2/l2_traffic.robot
+| Resource | resources/libraries/robot/l2/l2_xconnect.robot
+| Library | resources.libraries.python.Trace
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV
+| Test Setup | Set up functional test
+| Test Teardown | Tear down functional test
+| Documentation | *RFC7348 VXLAN: L2 cross-connect with VXLAN test cases*
+| ...
+| ... | *[Top] Network topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet encapsulations:* Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on
+| ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
+| ... | cross-connect (L2XC) switching; VXLAN tunnels are configured between
+| ... | L2XCs on DUT1 and DUT2.
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets
+| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive
+| ... | TG verifies packets for correctness and their IPv4 src-addr, dst-addr
+| ... | and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC7348.
+
+*** Variables ***
+| ${VNI}= | 24
+
+*** Test Cases ***
+| TC01: DUT1 and DUT2 with L2XC and VXLANoIPv4 tunnels switch ICMPv4 between TG links
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \
+| | ... | [Ref] RFC7348.DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On
+| | ... | DUT1 and DUT2 configure L2 cross-connect (L2XC), each with one
+| | ... | interface to TG and one VXLAN tunnel interface towards the other
+| | ... | DUT. [Ver] Make TG send ICMPv4 Echo Req between two of its
+| | ... | interfaces; verify all packets are received. [Ref] RFC7348.
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | ${dut1_to_dut2_name}= | Get interface name | ${dut1_node} | ${dut1_to_dut2}
+| | ${dut2_to_dut1_name}= | Get interface name | ${dut2_node} | ${dut2_to_dut1}
+| | And Configure IP addresses and neighbors on interfaces
+| | ... | ${dut1_node} | ${dut1_to_dut2_name} | ${NONE}
+| | ... | ${dut2_node} | ${dut2_to_dut1_name} | ${NONE}
+| | ${dut1s_vxlan}= | When Create VXLAN interface | ${dut1_node} | ${VNI}
+| | | ... | ${dut1s_ip_address} | ${dut2s_ip_address}
+| | And Configure L2XC | ${dut1_node} | ${dut1_to_tg} | ${dut1s_vxlan}
+| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${VNI}
+| | | ... | ${dut2s_ip_address} | ${dut1s_ip_address}
+| | And Configure L2XC | ${dut2_node} | ${dut2_to_tg} | ${dut2s_vxlan}
+| | Then Send ICMPv4 bidirectionally and verify received packets
+| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
diff --git a/tests/vpp/func/ip4_tunnels/vxlan/eth4p-ethip4vxlan-l2bdbasemaclrn-l2shg-func.robot b/tests/vpp/func/ip4_tunnels/vxlan/eth4p-ethip4vxlan-l2bdbasemaclrn-l2shg-func.robot
new file mode 100644
index 0000000000..8fd608eada
--- /dev/null
+++ b/tests/vpp/func/ip4_tunnels/vxlan/eth4p-ethip4vxlan-l2bdbasemaclrn-l2shg-func.robot
@@ -0,0 +1,200 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/overlay/vxlan.robot
+| Resource | resources/libraries/robot/l2/l2_traffic.robot
+| Resource | resources/libraries/robot/vm/qemu.robot
+| Resource | resources/libraries/robot/vm/double_qemu_setup.robot
+| Library | resources.libraries.python.Trace
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV
+| Test Setup | Set up functional test
+| Test Teardown | Tear down functional test
+| Documentation | *L2BD with SHG combined with VXLAN test cases - IPv4*
+| ...
+| ... | *[Top] Network topologies:* TG=DUT1=DUT2=TG 3-node circular topology
+| ... | with double parallel links.
+| ... | *[Enc] Packet encapsulations:* Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on
+| ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
+| ... | bridge-domain (L2BD) switching combined with MAC learning enabled
+| ... | and Split Horizon Groups (SHG); VXLAN tunnels are configured
+| ... | between L2BDs on DUT1 and DUT2.
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent
+| ... | in both directions by TG on links to DUT1 and DUT2; on receive TG
+| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr
+| ... | and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC7348.
+
+*** Variables ***
+| ${vni_1}= | 23
+| ${vni_2}= | 35
+
+| ${bd_id1}= | 10
+| ${bd_id2}= | 20
+| ${bd_id3}= | 30
+| ${shg1}= | 1
+| ${shg2}= | 2
+
+| ${ip4_addr1}= | 172.16.0.1
+| ${ip4_addr2}= | 172.16.0.2
+| ${ip4_prefix}= | 24
+
+*** Test Cases ***
+| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv4 tunnels in SHG switch ICMPv4 between TG links
+| | [Documentation]
+| | ... | [Top] TG=DUT1=DUT2=TG. [Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \
+| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 configure L2
+| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces
+| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN
+| | ... | interfaces into the same Split-Horizon-Group (SHG). On DUT2 configure
+| | ... | two L2 bridge-domain (MAC learning enabled), each with one untagged
+| | ... | interface to TG and one VXLAN interface towards the DUT1. [Ver] Make
+| | ... | TG send ICMPv4 Echo Reqs between all four of its interfaces to be
+| | ... | switched by DUT1 and DUT2; verify packets are not switched between
+| | ... | TG interfaces connected to DUT2 that are isolated by SHG on DUT1.
+| | ... | [Ref] RFC7348.
+| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO
+| | Given Configure path for 3-node BD-SHG test | ${nodes['TG']}
+| | ... | ${nodes['DUT1']}
+| | ... | ${nodes['DUT2']}
+| | And Set interfaces in 3-node BD-SHG test up
+| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr1}
+| | ... | ${ip4_prefix}
+| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr2}
+| | ... | ${ip4_prefix}
+| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr2}
+| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr1}
+| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1}
+| | | ... | ${ip4_addr1} | ${ip4_addr2}
+| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2}
+| | | ... | ${ip4_addr1} | ${ip4_addr2}
+| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1}
+| | | ... | ${ip4_addr2} | ${ip4_addr1}
+| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2}
+| | | ... | ${ip4_addr2} | ${ip4_addr1}
+| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up
+| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up
+| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up
+| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up
+| | And Vpp Node Interfaces Ready Wait | ${dut1_node}
+| | And Vpp Node Interfaces Ready Wait | ${dut2_node}
+| | And Create bridge domain | ${dut1_node} | ${bd_id1}
+| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg_if1}
+| | ... | ${bd_id1}
+| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg_if2}
+| | ... | ${bd_id1}
+| | And Add interface to bridge domain | ${dut1_node} | ${dut1s_vxlan1}
+| | ... | ${bd_id1} | ${shg1}
+| | And Add interface to bridge domain | ${dut1_node} | ${dut1s_vxlan2}
+| | ... | ${bd_id1} | ${shg1}
+| | And Create bridge domain | ${dut2_node} | ${bd_id2}
+| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg_if1}
+| | ... | ${bd_id2}
+| | And Add interface to bridge domain | ${dut2_node} | ${dut2s_vxlan1}
+| | ... | ${bd_id2}
+| | And Create bridge domain | ${dut2_node} | ${bd_id3}
+| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg_if2}
+| | ... | ${bd_id3}
+| | And Add interface to bridge domain | ${dut2_node} | ${dut2s_vxlan2}
+| | ... | ${bd_id3}
+| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg_node}
+| | ... | ${tg_to_dut1_if1}
+| | ... | ${tg_to_dut2_if1}
+| | And Send ICMPv4 bidirectionally and verify received packets | ${tg_node}
+| | ... | ${tg_to_dut1_if1}
+| | ... | ${tg_to_dut2_if2}
+| | And Send ICMPv4 bidirectionally and verify received packets | ${tg_node}
+| | ... | ${tg_to_dut1_if2}
+| | ... | ${tg_to_dut2_if1}
+| | And Send ICMPv4 bidirectionally and verify received packets | ${tg_node}
+| | ... | ${tg_to_dut1_if2}
+| | ... | ${tg_to_dut2_if2}
+| | And Run Keyword And Expect Error | ICMP echo Rx timeout
+| | ... | Send ICMPv4 bidirectionally and verify received packets
+| | | ... | ${tg_node} | ${tg_to_dut2_if1}
+| | | ... | ${tg_to_dut2_if2}
+
+| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv4 tunnels in different SHGs switch ICMPv4 between TG links
+| | [Documentation]
+| | ... | [Top] TG=DUT1=DUT2=TG.[Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \
+| | ... | DUT1-DUT2; Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 configure L2
+| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces
+| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN
+| | ... | interfaces into the different Split-Horizon-Group (SHGs). On DUT2
+| | ... | configure two L2 bridge-domain (MAC learning enabled), each with one
+| | ... | untagged interface to TG and one VXLAN interface towards the DUT1.
+| | ... | [Ver] Make TG send ICMPv4 Echo Req between all four of its interfaces
+| | ... | to be switched by DUT1 and DUT2; verify packets are switched between
+| | ... | all TG interfaces. [Ref] RFC7348.
+| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO
+| | Given Configure path for 3-node BD-SHG test | ${nodes['TG']}
+| | ... | ${nodes['DUT1']}
+| | ... | ${nodes['DUT2']}
+| | And Set interfaces in 3-node BD-SHG test up
+| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr1}
+| | ... | ${ip4_prefix}
+| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr2}
+| | ... | ${ip4_prefix}
+| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip4_addr2}
+| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip4_addr1}
+| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1}
+| | | ... | ${ip4_addr1} | ${ip4_addr2}
+| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2}
+| | | ... | ${ip4_addr1} | ${ip4_addr2}
+| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1}
+| | | ... | ${ip4_addr2} | ${ip4_addr1}
+| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2}
+| | | ... | ${ip4_addr2} | ${ip4_addr1}
+| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up
+| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up
+| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up
+| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up
+| | And Vpp Node Interfaces Ready Wait | ${dut1_node}
+| | And Vpp Node Interfaces Ready Wait | ${dut2_node}
+| | And Create bridge domain | ${dut1_node} | ${bd_id1}
+| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg_if1}
+| | ... | ${bd_id1}
+| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg_if2}
+| | ... | ${bd_id1}
+| | And Add interface to bridge domain | ${dut1_node} | ${dut1s_vxlan1}
+| | ... | ${bd_id1} | ${shg1}
+| | And Add interface to bridge domain | ${dut1_node} | ${dut1s_vxlan2}
+| | ... | ${bd_id1} | ${shg2}
+| | And Create bridge domain | ${dut2_node} | ${bd_id2}
+| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg_if1}
+| | ... | ${bd_id2}
+| | And Add interface to bridge domain | ${dut2_node} | ${dut2s_vxlan1}
+| | ... | ${bd_id2}
+| | And Create bridge domain | ${dut2_node} | ${bd_id3}
+| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg_if2}
+| | ... | ${bd_id3}
+| | And Add interface to bridge domain | ${dut2_node} | ${dut2s_vxlan2}
+| | ... | ${bd_id3}
+| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg_node}
+| | ... | ${tg_to_dut1_if1}
+| | ... | ${tg_to_dut2_if1}
+| | And Send ICMPv4 bidirectionally and verify received packets | ${tg_node}
+| | ... | ${tg_to_dut1_if1}
+| | ... | ${tg_to_dut2_if2}
+| | And Send ICMPv4 bidirectionally and verify received packets | ${tg_node}
+| | ... | ${tg_to_dut1_if2}
+| | ... | ${tg_to_dut2_if1}
+| | And Send ICMPv4 bidirectionally and verify received packets | ${tg_node}
+| | ... | ${tg_to_dut1_if2}
+| | ... | ${tg_to_dut2_if2}
+| | And Send ICMPv4 bidirectionally and verify received packets | ${tg_node}
+| | ... | ${tg_to_dut2_if1}
+| | ... | ${tg_to_dut2_if2}