aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/func/ip6/eth2p-ethip6-ip6base-func.robot
diff options
context:
space:
mode:
Diffstat (limited to 'tests/vpp/func/ip6/eth2p-ethip6-ip6base-func.robot')
-rw-r--r--tests/vpp/func/ip6/eth2p-ethip6-ip6base-func.robot120
1 files changed, 0 insertions, 120 deletions
diff --git a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-func.robot b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-func.robot
deleted file mode 100644
index d4b7939a9b..0000000000
--- a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-func.robot
+++ /dev/null
@@ -1,120 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.Trace
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/ip/ip6.robot
-| Resource | resources/libraries/robot/shared/counters.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Variables | resources/libraries/python/IPv6NodesAddr.py | ${nodes}
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | SKIP_VPP_PATCH
-| Suite Setup | Run Keywords
-| ... | Configure IPv6 on all DUTs in topology | ${nodes} | ${nodes_ipv6_addr} | AND
-| ... | Suppress ICMPv6 router advertisement message | ${nodes} | AND
-| ... | Configure IPv6 routing on all DUTs | ${nodes} | ${nodes_ipv6_addr} | AND
-| ... | Configure all TGs for traffic script
-| Test Setup | Run Keywords | Save VPP PIDs | AND
-| ... | Reset PAPI History On All DUTs | ${nodes} | AND
-| ... | Clear interface counters on all vpp nodes in topology | ${nodes}
-| Test Teardown | Run Keywords
-| ... | Show packet trace on all DUTs | ${nodes} | AND
-| ... | Show PAPI History On All DUTs | ${nodes} | AND
-| ... | Verify VPP PID in Teardown
-| Documentation | *IPv6 routing test cases*
-| ...
-| ... | RFC2460 IPv6, RFC4443 ICMPv6, RFC4861 Neighbor Discovery.
-| ... | Encapsulations: Eth-IPv6-ICMPv6 on links TG-DUT1, TG-DUT2, DUT1-DUT2;
-| ... | Eth-IPv6-NS/NA on links TG-DUT. IPv6 routing tests use circular 3-node
-| ... | topology TG - DUT1 - DUT2 - TG with one link between the nodes. DUT1 and
-| ... | DUT2 are configured with IPv6 routing and static routes. Test ICMPv6
-| ... | Echo Request packets are sent in both directions by TG on links to DUT1
-| ... | and DUT2 and received on TG links on the other side of circular
-| ... | topology. On receive TG verifies packets IPv6 src-addr, dst-addr and MAC
-| ... | addresses.
-
-*** Test Cases ***
-| TC01: DUT replies to ICMPv6 Echo Req to its ingress interface
-| | [Tags] | VM_ENV
-| | [Documentation]
-| | ... | Make TG send ICMPv6 Echo Req to DUT ingress interface. Make TG\
-| | ... | verify ICMPv6 Echo Reply is correct.
-| | Send IPv6 icmp echo request to DUT1 ingress inteface and verify answer | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes_ipv6_addr}
-
-| TC02: DUT replies to ICMPv6 Echo Req pkt with size 64B-to-1500B-incr-1B
-| | [Tags] | VM_ENV
-| | [Documentation]
-| | ... | Make TG send ICMPv6 Echo Reqs to DUT ingress interface,\
-| | ... | incrementating frame size from 64B to 1500B with increment step
-| | ... | of 1Byte. Make TG verify ICMP Echo Replies are correct.
-| | Execute IPv6 ICMP echo sweep | ${nodes['TG']} | ${nodes['DUT1']} | 0 | 1452 | 1 | ${nodes_ipv6_addr}
-
-| TC03: DUT replies to ICMPv6 Echo Req pkt with size 1500B-to-9000B-incr-10B
-| | [Documentation]
-| | ... | Make TG send ICMPv6 Echo Reqs to DUT ingress interface,\
-| | ... | incrementating frame size from 1500B to 9000B with increment
-| | ... | step of 10Bytes. Make TG verify ICMPv6 Echo Replies are correct.
-| | [Setup] | Configure MTU on TG based on MTU on DUT | ${nodes['TG']} | ${nodes['DUT1']}
-| | [Teardown] | Run keywords
-| | ... | Set default Ethernet MTU on all interfaces on node | ${nodes['TG']}
-| | ... | AND | Verify VPP PID in Teardown
-| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']}
-| | Compute Path
-| | ${dut_port} | ${dut_node}= | Last Interface
-| | ${mtu}= | Get Interface MTU | ${dut_node} | ${dut_port}
-| | # ICMPv6 payload size is frame size minus size of Ehternet header, FCS,
-| | # IPv6 header and ICMPv6 header
-| | ${end_size}= | Evaluate | ${mtu} - 14 - 4 - 40 - 8
-| | Run Keyword If | ${mtu} > 1518
-| | ... | Execute IPv6 ICMP echo sweep | ${nodes['TG']} | ${nodes['DUT1']}
-| | ... | 1452 | ${end_size} | 10 | ${nodes_ipv6_addr}
-
-| TC04: DUT routes to its egress interface
-| | [Tags] | VM_ENV
-| | [Documentation]
-| | ... | Make TG send ICMPv6 Echo Req towards DUT1 egress interface\
-| | ... | connected to DUT2. Make TG verify ICMPv6 Echo Reply is correct.
-| | Send IPv6 ICMP echo request to DUT1 egress interface and verify answer | ${nodes['TG']} | ${nodes['DUT1']} |
-| | ... | ${nodes['DUT2']} | ${nodes_ipv6_addr}
-
-| TC05: DUT1 routes to DUT2 ingress interface
-| | [Tags] | VM_ENV
-| | [Documentation]
-| | ... | Make TG send ICMPv6 Echo Req towards DUT2 ingress interface\
-| | ... | connected to DUT1. Make TG verify ICMPv6 Echo Reply is correct.
-| | Send IPv6 ICMP echo request to DUT2 via DUT1 and verify answer | ${nodes['TG']} | ${nodes['DUT1']}
-| | ... | ${nodes['DUT2']} | ${nodes_ipv6_addr}
-
-| TC06: DUT1 routes to DUT2 egress interface
-| | [Tags] | VM_ENV
-| | [Documentation]
-| | ... | Make TG send ICMPv6 Echo Req towards DUT2 egress interface\
-| | ... | connected to TG. Make TG verify ICMPv6 Echo Reply is correct.
-| | Send IPv6 ICMP echo request to DUT2 egress interface via DUT1 and verify answer | ${nodes['TG']} | ${nodes['DUT1']}
-| | ... | ${nodes['DUT2']} | ${nodes_ipv6_addr}
-
-| TC07: DUT1 and DUT2 route between TG interfaces
-| | [Tags] | VM_ENV
-| | [Documentation]
-| | ... | Make TG send ICMPv6 Echo Req between its interfaces across DUT1\
-| | ... | and DUT2. Make TG verify ICMPv6 Echo Replies are correct.
-| | Ipv6 tg to tg routed | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']}
-| | ... | ${nodes_ipv6_addr}
-
-| TC08: DUT replies to IPv6 Neighbor Solicitation
-| | [Tags] | VM_ENV
-| | [Documentation]
-| | ... | On DUT configure interface IPv6 address in the main routing\
-| | ... | domain. Make TG send Neighbor Solicitation message on the link
-| | ... | to DUT and verify DUT Neighbor Advertisement reply is correct.
-| | Send IPv6 neighbor solicitation and verify answer | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes_ipv6_addr}