diff options
Diffstat (limited to 'tests/vpp/func/ip6/eth2p-ethip6-ip6base-iaclbase-func.robot')
| -rw-r--r-- | tests/vpp/func/ip6/eth2p-ethip6-ip6base-iaclbase-func.robot | 200 |
1 files changed, 0 insertions, 200 deletions
diff --git a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-iaclbase-func.robot b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-iaclbase-func.robot deleted file mode 100644 index ad0d322948..0000000000 --- a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-iaclbase-func.robot +++ /dev/null @@ -1,200 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.Classify.Classify -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.Trace -| ... -| Resource | resources/libraries/robot/ip/ip6.robot -| Resource | resources/libraries/robot/l2/l2_xconnect.robot -| Resource | resources/libraries/robot/shared/counters.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| ... -| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | SKIP_VPP_PATCH -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *IPv6 routing with ingress ACL test cases* -| ... -| ... | Encapsulations: Eth-IPv6 on links TG-DUT1, TG-DUT2, DUT1-DUT2. IPv6 -| ... | ingress ACL (iACL) tests use 3-node topology TG - DUT1 - DUT2 - TG with -| ... | one link between the nodes. DUT1 and DUT2 are configured with IPv6 -| ... | routing and static routes. DUT1 is configured with iACL on link to TG, -| ... | iACL classification and permit action are configured on a per test -| ... | case basis. Test ICMPv6 Echo Request packets are sent in one direction -| ... | by TG on link to DUT1 and received on TG link to DUT2. On receive TG -| ... | verifies if packets are accepted, or if received verifies packet IPv6 -| ... | src-addr, dst-addr and MAC addresses. - -*** Variables *** -| ${dut1_to_tg_ip}= | 3ffe:62::1 -| ${dut1_to_dut2_ip}= | 3ffe:63::1 -| ${dut1_to_dut2_ip_GW}= | 3ffe:63::2 -| ${dut2_to_dut1_ip}= | 3ffe:72::1 -| ${dut2_to_tg_ip}= | 3ffe:73::1 -| ${test_dst_ip}= | 3ffe:64::1 -| ${test_src_ip}= | 3ffe:61::1 -| ${non_drop_dst_ip}= | 3ffe:54::1 -| ${non_drop_src_ip}= | 3ffe:51::1 -| ${prefix_length}= | 64 -| ${ip_version}= | ip6 -| ${l2_table}= | l2 - -*** Test Cases *** -| TC01: DUT with iACL IPv6 src-addr and dst-addr accepts matching pkts -| | [Documentation] -| | ... | On DUT1 add source and destination IPv6 addresses to classify table\ -| | ... | with 'permit'. -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And VPP Interface Set IP Address -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length} -| | And VPP Add IP Neighbor -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW} -| | ... | ${tg_to_dut2_mac} -| | And Vpp Route Add -| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length} -| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2} -| | And Vpp Route Add -| | ... | ${dut1_node} | ${non_drop_dst_ip} | ${prefix_length} -| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2} -| | And Configure L2XC -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} -| | And Vpp All Ra Suppress Link Layer | ${nodes} -| | Then Send packet and verify headers | ${tg_node} -| | ... | ${non_drop_src_ip} | ${non_drop_dst_ip} | ${tg_to_dut1} -| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2} -| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers | ${tg_node} -| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} -| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} -| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} -| | ${table_index_1} | ${skip_n_1} | ${match_n_1}= -| | ... | When Vpp Creates Classify Table L3 | ${dut1_node} -| | ... | ${ip_version} | src | ${test_src_ip} -| | ${table_index_2} | ${skip_n_2} | ${match_n_2}= -| | ... | And Vpp Creates Classify Table L3 | ${dut1_node} | ${ip_version} -| | ... | dst | ${test_dst_ip} -| | And Vpp Configures Classify Session L3 -| | ... | ${dut1_node} | permit | ${table_index_1} -| | ... | ${ip_version} | src | ${test_src_ip} -| | And Vpp Configures Classify Session L3 -| | ... | ${dut1_node} | permit | ${table_index_2} -| | ... | ${ip_version} | dst | ${test_dst_ip} -| | And Vpp Enable Input Acl Interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index_1} -| | And Vpp Enable Input Acl Interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index_2} -| | Then Send packet and verify headers | ${tg_node} -| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} -| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} -| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers | ${tg_node} -| | ... | ${non_drop_src_ip} | ${non_drop_dst_ip} | ${tg_to_dut1} -| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2} -| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} - -| TC02: DUT with iACL IPv6 TCP src-ports and dst-ports accepts matching pkts -| | [Documentation] -| | ... | On DUT1 add TCP source and destination ports to classify table\ -| | ... | with 'permit'. -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And VPP Interface Set IP Address -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip} -| | ... | ${prefix_length} -| | And VPP Add IP Neighbor -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW} -| | ... | ${tg_to_dut2_mac} -| | And Vpp Route Add -| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length} -| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2} -| | And Configure L2XC -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} -| | And Vpp All Ra Suppress Link Layer | ${nodes} -| | Then Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} -| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 25 -| | And Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} -| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20 -| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | TCP -| | ... | source + destination -| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 80 | 20 -| | ${table_index} | ${skip_n} | ${match_n}= -| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask} -| | And Vpp Configures Classify Session Hex -| | ... | ${dut1_node} | permit | ${table_index} | ${hex_value} -| | And Vpp Enable Input Acl Interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index} -| | Then Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} -| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20 -| | And Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} -| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 25 - -| TC03: DUT with iACL IPv6 UDP src-ports and dst-ports accepts matching pkts -| | [Documentation] -| | ... | On DUT1 add UDP source and destination ports to classify table\ -| | ... | with 'permit'. -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And VPP Interface Set IP Address -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip} -| | ... | ${prefix_length} -| | And VPP Add IP Neighbor -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW} -| | ... | ${tg_to_dut2_mac} -| | And Vpp Route Add -| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length} -| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2} -| | And Configure L2XC -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} -| | And Vpp All Ra Suppress Link Layer | ${nodes} -| | Then Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} -| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 25 -| | And Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} -| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20 -| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | UDP -| | ... | source + destination -| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 80 | 20 -| | ${table_index} | ${skip_n} | ${match_n}= -| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask} -| | And Vpp Configures Classify Session Hex -| | ... | ${dut1_node} | permit | ${table_index} | ${hex_value} -| | And Vpp Enable Input Acl Interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index} -| | Then Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} -| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20 -| | And Send TCP or UDP packet and verify received packet | ${tg_node} -| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} -| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 25 |