aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/func/ip6
diff options
context:
space:
mode:
Diffstat (limited to 'tests/vpp/func/ip6')
-rw-r--r--tests/vpp/func/ip6/eth2p-ethip6-ip6base-copblklistbase-func.robot101
-rw-r--r--tests/vpp/func/ip6/eth2p-ethip6-ip6base-copwhlistbase-func.robot101
-rw-r--r--tests/vpp/func/ip6/eth2p-ethip6-ip6base-func.robot120
-rw-r--r--tests/vpp/func/ip6/eth2p-ethip6-ip6base-iaclbase-func.robot577
-rw-r--r--tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6dhcpproxy-func.robot66
-rw-r--r--tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6ecmp-func.robot74
-rw-r--r--tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6ra-func.robot107
-rw-r--r--tests/vpp/func/ip6/eth2p-ethip6-ip6base-ipolicemarkbase-func.robot161
-rw-r--r--tests/vpp/func/ip6/eth2p-ethip6-ip6basevrf-func.robot409
9 files changed, 1716 insertions, 0 deletions
diff --git a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-copblklistbase-func.robot b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-copblklistbase-func.robot
new file mode 100644
index 0000000000..f4314500e5
--- /dev/null
+++ b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-copblklistbase-func.robot
@@ -0,0 +1,101 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library | resources.libraries.python.Trace
+| Library | resources.libraries.python.Cop
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/shared/interfaces.robot
+| Resource | resources/libraries/robot/ip/ip6.robot
+| Resource | resources/libraries/robot/shared/traffic.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/l2/l2_xconnect.robot
+| Variables | resources/libraries/python/IPv6NodesAddr.py | ${nodes}
+| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO
+| Test Setup | Set up functional test
+| Test Teardown | Tear down functional test
+| Documentation | *COP Security IPv6 Blacklist Tests*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-ICMPv6 on all links.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and
+| ... | static routes. COP security black-lists are applied on DUT1 ingress
+| ... | interface from TG. DUT2 is configured with L2XC.
+| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in
+| ... | one direction by TG on link to DUT1; on receive TG verifies packets for
+| ... | correctness and drops as applicable.
+| ... | *[Ref] Applicable standard specifications:*
+
+*** Variables ***
+| ${tg_node}= | ${nodes['TG']}
+| ${dut1_node}= | ${nodes['DUT1']}
+| ${dut2_node}= | ${nodes['DUT2']}
+
+| ${dut1_if1_ip}= | 3ffe:62::1
+| ${dut1_if2_ip}= | 3ffe:63::1
+| ${dut1_if1_ip_GW}= | 3ffe:62::2
+| ${dut1_if2_ip_GW}= | 3ffe:63::2
+
+| ${dut2_if1_ip}= | 3ffe:72::1
+| ${dut2_if2_ip}= | 3ffe:73::1
+
+| ${test_dst_ip}= | 3ffe:64::1
+| ${test_src_ip}= | 3ffe:61::1
+
+| ${cop_dut_ip}= | 3ffe:61::
+
+| ${ip_prefix}= | 64
+
+| ${nodes_ipv6_addresses}= | ${nodes_ipv6_addr}
+
+| ${fib_table_number}= | 1
+
+*** Test Cases ***
+| TC01: DUT drops IPv6 pkts with COP blacklist set with IPv6 src-addr
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 \
+| | ... | configure interface IPv6 addresses and routes in the main
+| | ... | routing domain, add COP blacklist on interface to TG with IPv6
+| | ... | src-addr matching packets generated by TG; on DUT2 configure L2
+| | ... | xconnect. [Ver] Make TG send ICMPv6 Echo Req on its interface to
+| | ... | DUT1; verify no ICMPv6 Echo Req pkts are received. [Ref]
+| | Given Configure path in 3-node circular topology
+| | ... | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg_node}
+| | And Set interfaces in 3-node circular topology up
+| | And Configure L2XC
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
+| | And VPP Set IF IPv6 Addr
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip} | ${ip_prefix}
+| | And VPP Set IF IPv6 Addr
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip} | ${ip_prefix}
+| | And VPP Set IF IPv6 Addr
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_if1_ip} | ${ip_prefix}
+| | And VPP Set IF IPv6 Addr
+| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_if2_ip} | ${ip_prefix}
+| | And Add IP Neighbor
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip_GW} | ${tg_to_dut1_mac}
+| | And Add IP Neighbor
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip_GW} | ${tg_to_dut2_mac}
+| | And Vpp Route Add | ${dut1_node}
+| | ... | ${test_dst_ip} | ${ip_prefix} | ${dut1_if2_ip_GW} | ${dut1_to_dut2}
+| | And Vpp All Ra Suppress Link Layer | ${nodes}
+| | And Add fib table | ${dut1_node}
+| | ... | ${cop_dut_ip} | ${ip_prefix} | ${fib_table_number} | drop
+| | When COP Add whitelist Entry
+| | ... | ${dut1_node} | ${dut1_to_tg} | ip6 | ${fib_table_number}
+| | And COP interface enable or disable | ${dut1_node} | ${dut1_to_tg} | enable
+| | Then Packet transmission from port to port should fail | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac}
+| | ... | ${tg_to_dut2_mac}
diff --git a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-copwhlistbase-func.robot b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-copwhlistbase-func.robot
new file mode 100644
index 0000000000..a60aa7760c
--- /dev/null
+++ b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-copwhlistbase-func.robot
@@ -0,0 +1,101 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library | resources.libraries.python.Trace
+| Library | resources.libraries.python.Cop
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/shared/interfaces.robot
+| Resource | resources/libraries/robot/ip/ip6.robot
+| Resource | resources/libraries/robot/shared/traffic.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/l2/l2_xconnect.robot
+| Variables | resources/libraries/python/IPv6NodesAddr.py | ${nodes}
+| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO
+| Test Setup | Set up functional test
+| Test Teardown | Tear down functional test
+| Documentation | *COP Security IPv6 Whitelist Tests*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-ICMPv6 on all links.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and
+| ... | static routes. COP security white-lists are applied on DUT1 ingress
+| ... | interface from TG. DUT2 is configured with L2XC.
+| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in
+| ... | one direction by TG on link to DUT1; on receive TG verifies packets for
+| ... | correctness and drops as applicable.
+| ... | *[Ref] Applicable standard specifications:*
+
+*** Variables ***
+| ${tg_node}= | ${nodes['TG']}
+| ${dut1_node}= | ${nodes['DUT1']}
+| ${dut2_node}= | ${nodes['DUT2']}
+
+| ${dut1_if1_ip}= | 3ffe:62::1
+| ${dut1_if2_ip}= | 3ffe:63::1
+| ${dut1_if1_ip_GW}= | 3ffe:62::2
+| ${dut1_if2_ip_GW}= | 3ffe:63::2
+
+| ${dut2_if1_ip}= | 3ffe:72::1
+| ${dut2_if2_ip}= | 3ffe:73::1
+
+| ${test_dst_ip}= | 3ffe:64::1
+| ${test_src_ip}= | 3ffe:61::1
+
+| ${cop_dut_ip}= | 3ffe:61::
+
+| ${ip_prefix}= | 64
+
+| ${nodes_ipv6_addresses}= | ${nodes_ipv6_addr}
+
+| ${fib_table_number}= | 1
+
+*** Test Cases ***
+| TC01: DUT permits IPv6 pkts with COP whitelist set with IPv6 src-addr
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 \
+| | ... | configure interface IPv6 addresses and routes in the main
+| | ... | routing domain, add COP whitelist on interface to TG with IPv6
+| | ... | src-addr matching packets generated by TG; on DUT2 configure L2
+| | ... | xconnect. [Ver] Make TG send ICMPv6 Echo Req on its interface to
+| | ... | DUT1; verify received ICMPv6 Echo Req pkts are correct. [Ref]
+| | Given Configure path in 3-node circular topology
+| | ... | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg_node}
+| | And Set interfaces in 3-node circular topology up
+| | And Configure L2XC
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
+| | And VPP Set IF IPv6 Addr
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip} | ${ip_prefix}
+| | And VPP Set IF IPv6 Addr
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip} | ${ip_prefix}
+| | And VPP Set IF IPv6 Addr
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_if1_ip} | ${ip_prefix}
+| | And VPP Set IF IPv6 Addr
+| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_if2_ip} | ${ip_prefix}
+| | And Add IP Neighbor
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip_GW} | ${tg_to_dut1_mac}
+| | And Add IP Neighbor
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip_GW} | ${tg_to_dut2_mac}
+| | And Vpp Route Add | ${dut1_node}
+| | ... | ${test_dst_ip} | ${ip_prefix} | ${dut1_if2_ip_GW} | ${dut1_to_dut2}
+| | And Vpp All Ra Suppress Link Layer | ${nodes}
+| | And Add fib table | ${dut1_node} | ${cop_dut_ip} | ${ip_prefix} |
+| | ... | ${fib_table_number} | local
+| | When COP Add whitelist Entry | ${dut1_node} | ${dut1_to_tg} | ip6 |
+| | ... | ${fib_table_number}
+| | And COP interface enable or disable | ${dut1_node} | ${dut1_to_tg} | enable
+| | Then Send packet and verify headers | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac}
+| | ... | ${tg_to_dut2_mac}
diff --git a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-func.robot b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-func.robot
new file mode 100644
index 0000000000..bd0b2a6b64
--- /dev/null
+++ b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-func.robot
@@ -0,0 +1,120 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library | resources.libraries.python.Trace
+| Resource | resources/libraries/robot/shared/interfaces.robot
+| Resource | resources/libraries/robot/ip/ip6.robot
+| Resource | resources/libraries/robot/shared/counters.robot
+| Resource | resources/libraries/robot/shared/default.robot
+| Variables | resources/libraries/python/IPv6NodesAddr.py | ${nodes}
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | SKIP_VPP_PATCH
+| Suite Setup | Run Keywords
+| ... | Configure IPv6 on all DUTs in topology | ${nodes} | ${nodes_ipv6_addr} | AND
+| ... | Suppress ICMPv6 router advertisement message | ${nodes} | AND
+| ... | Configure IPv6 routing on all DUTs | ${nodes} | ${nodes_ipv6_addr} | AND
+| ... | Configure all TGs for traffic script
+| Test Setup | Run Keywords | Save VPP PIDs | AND
+| ... | Reset VAT History On All DUTs | ${nodes} | AND
+| ... | Clear interface counters on all vpp nodes in topology | ${nodes}
+| Test Teardown | Run Keywords
+| ... | Show packet trace on all DUTs | ${nodes} | AND
+| ... | Show VAT History On All DUTs | ${nodes} | AND
+| ... | Verify VPP PID in Teardown
+| Documentation | *IPv6 routing test cases*
+| ...
+| ... | RFC2460 IPv6, RFC4443 ICMPv6, RFC4861 Neighbor Discovery.
+| ... | Encapsulations: Eth-IPv6-ICMPv6 on links TG-DUT1, TG-DUT2, DUT1-DUT2;
+| ... | Eth-IPv6-NS/NA on links TG-DUT. IPv6 routing tests use circular 3-node
+| ... | topology TG - DUT1 - DUT2 - TG with one link between the nodes. DUT1 and
+| ... | DUT2 are configured with IPv6 routing and static routes. Test ICMPv6
+| ... | Echo Request packets are sent in both directions by TG on links to DUT1
+| ... | and DUT2 and received on TG links on the other side of circular
+| ... | topology. On receive TG verifies packets IPv6 src-addr, dst-addr and MAC
+| ... | addresses.
+
+*** Test Cases ***
+| TC01: DUT replies to ICMPv6 Echo Req to its ingress interface
+| | [Tags] | VM_ENV
+| | [Documentation]
+| | ... | Make TG send ICMPv6 Echo Req to DUT ingress interface. Make TG\
+| | ... | verify ICMPv6 Echo Reply is correct.
+| | Send IPv6 icmp echo request to DUT1 ingress inteface and verify answer | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes_ipv6_addr}
+
+| TC02: DUT replies to ICMPv6 Echo Req pkt with size 64B-to-1500B-incr-1B
+| | [Tags] | VM_ENV
+| | [Documentation]
+| | ... | Make TG send ICMPv6 Echo Reqs to DUT ingress interface,\
+| | ... | incrementating frame size from 64B to 1500B with increment step
+| | ... | of 1Byte. Make TG verify ICMP Echo Replies are correct.
+| | Execute IPv6 ICMP echo sweep | ${nodes['TG']} | ${nodes['DUT1']} | 0 | 1452 | 1 | ${nodes_ipv6_addr}
+
+| TC03: DUT replies to ICMPv6 Echo Req pkt with size 1500B-to-9000B-incr-10B
+| | [Documentation]
+| | ... | Make TG send ICMPv6 Echo Reqs to DUT ingress interface,\
+| | ... | incrementating frame size from 1500B to 9000B with increment
+| | ... | step of 10Bytes. Make TG verify ICMPv6 Echo Replies are correct.
+| | [Setup] | Configure MTU on TG based on MTU on DUT | ${nodes['TG']} | ${nodes['DUT1']}
+| | [Teardown] | Run keywords
+| | ... | Set default Ethernet MTU on all interfaces on node | ${nodes['TG']}
+| | ... | AND | Verify VPP PID in Teardown
+| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']}
+| | Compute Path
+| | ${dut_port} | ${dut_node}= | Last Interface
+| | ${mtu}= | Get Interface MTU | ${dut_node} | ${dut_port}
+| | # ICMPv6 payload size is frame size minus size of Ehternet header, FCS,
+| | # IPv6 header and ICMPv6 header
+| | ${end_size}= | Evaluate | ${mtu} - 14 - 4 - 40 - 8
+| | Run Keyword If | ${mtu} > 1518
+| | ... | Execute IPv6 ICMP echo sweep | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | 1452 | ${end_size} | 10 | ${nodes_ipv6_addr}
+
+| TC04: DUT routes to its egress interface
+| | [Tags] | VM_ENV
+| | [Documentation]
+| | ... | Make TG send ICMPv6 Echo Req towards DUT1 egress interface\
+| | ... | connected to DUT2. Make TG verify ICMPv6 Echo Reply is correct.
+| | Send IPv6 ICMP echo request to DUT1 egress interface and verify answer | ${nodes['TG']} | ${nodes['DUT1']} |
+| | ... | ${nodes['DUT2']} | ${nodes_ipv6_addr}
+
+| TC05: DUT1 routes to DUT2 ingress interface
+| | [Tags] | VM_ENV
+| | [Documentation]
+| | ... | Make TG send ICMPv6 Echo Req towards DUT2 ingress interface\
+| | ... | connected to DUT1. Make TG verify ICMPv6 Echo Reply is correct.
+| | Send IPv6 ICMP echo request to DUT2 via DUT1 and verify answer | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | ${nodes['DUT2']} | ${nodes_ipv6_addr}
+
+| TC06: DUT1 routes to DUT2 egress interface
+| | [Tags] | VM_ENV
+| | [Documentation]
+| | ... | Make TG send ICMPv6 Echo Req towards DUT2 egress interface\
+| | ... | connected to TG. Make TG verify ICMPv6 Echo Reply is correct.
+| | Send IPv6 ICMP echo request to DUT2 egress interface via DUT1 and verify answer | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | ${nodes['DUT2']} | ${nodes_ipv6_addr}
+
+| TC07: DUT1 and DUT2 route between TG interfaces
+| | [Tags] | VM_ENV
+| | [Documentation]
+| | ... | Make TG send ICMPv6 Echo Req between its interfaces across DUT1\
+| | ... | and DUT2. Make TG verify ICMPv6 Echo Replies are correct.
+| | Ipv6 tg to tg routed | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']}
+| | ... | ${nodes_ipv6_addr}
+
+| TC08: DUT replies to IPv6 Neighbor Solicitation
+| | [Tags] | VM_ENV
+| | [Documentation]
+| | ... | On DUT configure interface IPv6 address in the main routing\
+| | ... | domain. Make TG send Neighbor Solicitation message on the link
+| | ... | to DUT and verify DUT Neighbor Advertisement reply is correct.
+| | Send IPv6 neighbor solicitation and verify answer | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes_ipv6_addr}
diff --git a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-iaclbase-func.robot b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-iaclbase-func.robot
new file mode 100644
index 0000000000..e0862ab9ef
--- /dev/null
+++ b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-iaclbase-func.robot
@@ -0,0 +1,577 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/shared/counters.robot
+| Resource | resources/libraries/robot/shared/interfaces.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/ip/ip6.robot
+| Resource | resources/libraries/robot/l2/l2_xconnect.robot
+| Resource | resources/libraries/robot/shared/traffic.robot
+| Library | resources.libraries.python.Classify.Classify
+| Library | resources.libraries.python.Trace
+| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO
+| Test Setup | Set up functional test
+| Test Teardown | Tear down functional test
+| Documentation | *IPv6 routing with ingress ACL test cases*
+| ...
+| ... | Encapsulations: Eth-IPv6 on links TG-DUT1, TG-DUT2, DUT1-DUT2. IPv6
+| ... | ingress ACL (iACL) tests use 3-node topology TG - DUT1 - DUT2 - TG with
+| ... | one link between the nodes. DUT1 and DUT2 are configured with IPv6
+| ... | routing and static routes. DUT1 is configured with iACL on link to TG,
+| ... | iACL classification and permit/deny action are configured on a per test
+| ... | case basis. Test ICMPv6 Echo Request packets are sent in one direction
+| ... | by TG on link to DUT1 and received on TG link to DUT2. On receive TG
+| ... | verifies if packets are dropped, or if received verifies packet IPv6
+| ... | src-addr, dst-addr and MAC addresses.
+
+*** Variables ***
+| ${dut1_to_tg_ip}= | 3ffe:62::1
+| ${dut1_to_dut2_ip}= | 3ffe:63::1
+| ${dut1_to_dut2_ip_GW}= | 3ffe:63::2
+| ${dut2_to_dut1_ip}= | 3ffe:72::1
+| ${dut2_to_tg_ip}= | 3ffe:73::1
+| ${test_dst_ip}= | 3ffe:64::1
+| ${test_src_ip}= | 3ffe:61::1
+| ${non_drop_dst_ip}= | 3ffe:54::1
+| ${non_drop_src_ip}= | 3ffe:51::1
+| ${prefix_length}= | 64
+| ${ip_version}= | ip6
+| ${l2_table}= | l2
+
+*** Test Cases ***
+| TC01: DUT with iACL IPv6 src-addr drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add source IPv6 address to classify table with 'deny'.\
+| | ... | Make TG verify matching packets are dropped.
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
+| | And Add Ip Neighbor
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
+| | ... | ${tg_to_dut2_mac}
+| | And Vpp Route Add
+| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
+| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
+| | And Configure L2XC
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
+| | And Vpp All Ra Suppress Link Layer | ${nodes}
+| | Then Send packet and verify headers | ${tg_node}
+| | ... | ${non_drop_src_ip} | ${test_dst_ip} | ${tg_to_dut1}
+| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
+| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
+| | And Send packet and verify headers | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
+| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
+| | ${table_index} | ${skip_n} | ${match_n}=
+| | ... | When Vpp Creates Classify Table L3 | ${dut1_node}
+| | ... | ${ip_version} | src
+| | And Vpp Configures Classify Session L3
+| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
+| | ... | ${ip_version} | src | ${test_src_ip}
+| | And Vpp Enable Input Acl Interface
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
+| | Then Packet transmission from port to port should fail | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
+| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
+| | And Send packet and verify headers | ${tg_node}
+| | ... | ${non_drop_src_ip} | ${test_dst_ip} | ${tg_to_dut1}
+| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
+| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
+
+| TC02: DUT with iACL IPv6 dst-addr drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add destination IPv6 address to classify table with 'deny'.\
+| | ... | Make TG verify matching packets are dropped.
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
+| | And Add Ip Neighbor
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
+| | ... | ${tg_to_dut2_mac}
+| | And Vpp Route Add
+| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
+| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
+| | And Vpp Route Add
+| | ... | ${dut1_node} | ${non_drop_dst_ip} | ${prefix_length}
+| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
+| | And Configure L2XC
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
+| | And Vpp All Ra Suppress Link Layer | ${nodes}
+| | Then Send packet and verify headers | ${tg_node}
+| | ... | ${test_src_ip} | ${non_drop_dst_ip} | ${tg_to_dut1}
+| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
+| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
+| | And Send packet and verify headers | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
+| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
+| | ${table_index} | ${skip_n} | ${match_n}=
+| | ... | When Vpp Creates Classify Table L3 | ${dut1_node}
+| | ... | ${ip_version} | dst
+| | And Vpp Configures Classify Session L3
+| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
+| | ... | ${ip_version} | dst | ${test_dst_ip}
+| | And Vpp Enable Input Acl Interface
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
+| | Then Packet transmission from port to port should fail | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
+| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
+| | And Send packet and verify headers | ${tg_node}
+| | ... | ${test_src_ip} | ${non_drop_dst_ip} | ${tg_to_dut1}
+| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
+| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
+
+| TC03: DUT with iACL IPv6 src-addr and dst-addr drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add source and destination IPv6 addresses to classify table\
+| | ... | with 'deny'. Make TG verify matching packets are dropped.
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
+| | And Add Ip Neighbor
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
+| | ... | ${tg_to_dut2_mac}
+| | And Vpp Route Add
+| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
+| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
+| | And Vpp Route Add
+| | ... | ${dut1_node} | ${non_drop_dst_ip} | ${prefix_length}
+| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
+| | And Configure L2XC
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
+| | And Vpp All Ra Suppress Link Layer | ${nodes}
+| | Then Send packet and verify headers | ${tg_node}
+| | ... | ${non_drop_src_ip} | ${non_drop_dst_ip} | ${tg_to_dut1}
+| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
+| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
+| | And Send packet and verify headers | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
+| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
+| | ${table_index_1} | ${skip_n_1} | ${match_n_1}=
+| | ... | When Vpp Creates Classify Table L3 | ${dut1_node}
+| | ... | ${ip_version} | src
+| | ${table_index_2} | ${skip_n_2} | ${match_n_2}=
+| | ... | And Vpp Creates Classify Table L3 | ${dut1_node} | ${ip_version} | dst
+| | And Vpp Configures Classify Session L3
+| | ... | ${dut1_node} | deny | ${table_index_1} | ${skip_n_1} | ${match_n_2}
+| | ... | ${ip_version} | src | ${test_src_ip}
+| | And Vpp Configures Classify Session L3
+| | ... | ${dut1_node} | deny | ${table_index_2} | ${skip_n_2} | ${match_n_2}
+| | ... | ${ip_version} | dst | ${test_dst_ip}
+| | And Vpp Enable Input Acl Interface
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index_1}
+| | And Vpp Enable Input Acl Interface
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index_2}
+| | Then Packet transmission from port to port should fail | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2}
+| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
+| | And Send packet and verify headers | ${tg_node}
+| | ... | ${non_drop_src_ip} | ${non_drop_dst_ip} | ${tg_to_dut1}
+| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
+| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
+
+| TC04: DUT with iACL IPv6 protocol set to TCP drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add protocol mask and TCP protocol (0x06) to classify table\
+| | ... | with 'deny'. Make TG verify matching packets are dropped.
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
+| | And Add Ip Neighbor
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
+| | ... | ${tg_to_dut2_mac}
+| | And Vpp Route Add
+| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
+| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
+| | And Configure L2XC
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
+| | And Vpp All Ra Suppress Link Layer | ${nodes}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
+| | ${table_index} | ${skip_n} | ${match_n}=
+| | ... | When Vpp Creates Classify Table Hex
+| | ... | ${dut1_node} | 0000000000000000000000000000000000000000FF
+| | And Vpp Configures Classify Session Hex
+| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
+| | ... | 000000000000000000000000000000000000000006
+| | And Vpp Enable Input Acl Interface
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
+| | Then TCP or UDP packet transmission should fail | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
+
+| TC05: DUT with iACL IPv6 protocol set to UDP drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add protocol mask and UDP protocol (0x11) to classify table\
+| | ... | with 'deny'. Make TG verify matching packets are dropped.
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
+| | And Add Ip Neighbor
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
+| | ... | ${tg_to_dut2_mac}
+| | And Vpp Route Add
+| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
+| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
+| | And Configure L2XC
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
+| | And Vpp All Ra Suppress Link Layer | ${nodes}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
+| | ${table_index} | ${skip_n} | ${match_n}=
+| | ... | When Vpp Creates Classify Table Hex
+| | ... | ${dut1_node} | 0000000000000000000000000000000000000000FF
+| | And Vpp Configures Classify Session Hex
+| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
+| | ... | 000000000000000000000000000000000000000011
+| | And Vpp Enable Input Acl Interface
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
+| | Then TCP or UDP packet transmission should fail | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
+
+| TC06: DUT with iACL IPv6 TCP src-ports drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add TCP source ports to classify table with 'deny'.\
+| | ... | Make TG verify matching packets are dropped.
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
+| | And Add Ip Neighbor
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
+| | ... | ${tg_to_dut2_mac}
+| | And Vpp Route Add
+| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
+| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
+| | And Configure L2XC
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
+| | And Vpp All Ra Suppress Link Layer | ${nodes}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 20
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
+| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | TCP | source
+| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 80 | 0
+| | ${table_index} | ${skip_n} | ${match_n}=
+| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
+| | And Vpp Configures Classify Session Hex
+| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
+| | ... | ${hex_value}
+| | And Vpp Enable Input Acl Interface
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
+| | Then TCP or UDP packet transmission should fail | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 20
+
+| TC07: DUT with iACL IPv6 TCP dst-ports drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add TCP destination ports to classify table with 'deny'.\
+| | ... | Make TG verify matching packets are dropped.
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
+| | And Add Ip Neighbor
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
+| | ... | ${tg_to_dut2_mac}
+| | And Vpp Route Add
+| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
+| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
+| | And Configure L2XC
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
+| | And Vpp All Ra Suppress Link Layer | ${nodes}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 20 | 110
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 20 | 80
+| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | TCP | destination
+| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 0 | 80
+| | ${table_index} | ${skip_n} | ${match_n}=
+| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
+| | And Vpp Configures Classify Session Hex
+| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
+| | ... | ${hex_value}
+| | And Vpp Enable Input Acl Interface
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
+| | Then TCP or UDP packet transmission should fail | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 20 | 80
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 20 | 110
+
+| TC08: DUT with iACL IPv6 TCP src-ports and dst-ports drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add TCP source and destination ports to classify table\
+| | ... | with 'deny'. Make TG verify matching packets are dropped.
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
+| | And Add Ip Neighbor
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
+| | ... | ${tg_to_dut2_mac}
+| | And Vpp Route Add
+| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
+| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
+| | And Configure L2XC
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
+| | And Vpp All Ra Suppress Link Layer | ${nodes}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 25
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
+| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | TCP
+| | ... | source + destination
+| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 80 | 20
+| | ${table_index} | ${skip_n} | ${match_n}=
+| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
+| | And Vpp Configures Classify Session Hex
+| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
+| | ... | ${hex_value}
+| | And Vpp Enable Input Acl Interface
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
+| | Then TCP or UDP packet transmission should fail | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 25
+
+| TC09: DUT with iACL IPv6 UDP src-ports drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add UDP source ports to classify table with 'deny'.\
+| | ... | Make TG verify matching packets are dropped.
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
+| | And Add Ip Neighbor
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
+| | ... | ${tg_to_dut2_mac}
+| | And Vpp Route Add
+| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
+| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
+| | And Configure L2XC
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
+| | And Vpp All Ra Suppress Link Layer | ${nodes}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 20
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
+| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | UDP | source
+| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 80 | 0
+| | ${table_index} | ${skip_n} | ${match_n}=
+| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
+| | And Vpp Configures Classify Session Hex
+| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
+| | ... | ${hex_value}
+| | And Vpp Enable Input Acl Interface
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
+| | Then TCP or UDP packet transmission should fail | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 20
+
+| TC10: DUT with iACL IPv6 UDP dst-ports drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add TCP destination ports to classify table with 'deny'.\
+| | ... | Make TG verify matching packets are dropped.
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
+| | And Add Ip Neighbor
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
+| | ... | ${tg_to_dut2_mac}
+| | And Vpp Route Add
+| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
+| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
+| | And Configure L2XC
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
+| | And Vpp All Ra Suppress Link Layer | ${nodes}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 20 | 110
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 20 | 80
+| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | UDP | destination
+| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 0 | 80
+| | ${table_index} | ${skip_n} | ${match_n}=
+| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
+| | And Vpp Configures Classify Session Hex
+| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
+| | ... | ${hex_value}
+| | And Vpp Enable Input Acl Interface
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
+| | Then TCP or UDP packet transmission should fail | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 20 | 80
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 20 | 110
+
+| TC11: DUT with iACL IPv6 UDP src-ports and dst-ports drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add UDP source and destination ports to classify table\
+| | ... | with 'deny'. Make TG verify matching packets are dropped.
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
+| | And Add Ip Neighbor
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
+| | ... | ${tg_to_dut2_mac}
+| | And Vpp Route Add
+| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
+| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
+| | And Configure L2XC
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
+| | And Vpp All Ra Suppress Link Layer | ${nodes}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 25
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
+| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | UDP
+| | ... | source + destination
+| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 80 | 20
+| | ${table_index} | ${skip_n} | ${match_n}=
+| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
+| | And Vpp Configures Classify Session Hex
+| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
+| | ... | ${hex_value}
+| | And Vpp Enable Input Acl Interface
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index}
+| | Then TCP or UDP packet transmission should fail | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 25
+
+| TC12: DUT with iACL MAC src-addr and iACL IPv6 UDP src-ports and dst-ports drops matching pkts
+| | [Documentation]
+| | ... | On DUT1 add source MAC address to classify (L2) table and add UDP\
+| | ... | source and destination ports to classify (hex) table with 'deny'.
+| | ... | Make TG verify matching packets are dropped.
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | And Configure L2XC
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_tg}
+| | And Configure L2XC
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
+| | And Vpp All Ra Suppress Link Layer | ${nodes}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 25
+| | And Send TCP or UDP packet and verify received packet | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
+| | ${table_index} | ${skip_n} | ${match_n}=
+| | ... | When Vpp Creates Classify Table L2 | ${dut1_node} | src
+| | And Vpp Configures Classify Session L2
+| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
+| | ... | src | ${tg_to_dut1_mac}
+| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | UDP
+| | ... | source + destination
+| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 80 | 20
+| | ${table_index} | ${skip_n} | ${match_n}=
+| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
+| | And Vpp Configures Classify Session Hex
+| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
+| | ... | ${hex_value}
+| | And Vpp Enable Input Acl Interface
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index}
+| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 25
+| | And TCP or UDP packet transmission should fail | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
+| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
diff --git a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6dhcpproxy-func.robot b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6dhcpproxy-func.robot
new file mode 100644
index 0000000000..2858f3743e
--- /dev/null
+++ b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6dhcpproxy-func.robot
@@ -0,0 +1,66 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/features/dhcp_proxy.robot
+| Resource | resources/libraries/robot/ip/ip6.robot
+| Library | resources.libraries.python.Trace
+| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO | SKIP_VPP_PATCH
+| Test Setup | Set up functional test
+| Test Teardown | Tear down functional test
+| Documentation | *DHCPv6 proxy test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG = DUT
+| ... | with two links between the nodes.
+| ... | *[Cfg] DUT configuration:* DUT is configured with DHCPv6 proxy.
+| ... | *[Ver] TG verification:* Test DHCPv6 packets are sent
+| ... | on TG on first link to DUT and received on TG on second link.
+| ... | On receive TG verifies if DHCPv6 packets are valid
+| ... | *[Ref] Applicable standard specifications:* RFC 3315
+
+
+*** Variables ***
+| ${dut_to_tg_if1_ip}= | 3ffe:62::1
+| ${dut_to_tg_if2_ip}= | 3ffe:63::1
+| ${dhcp_server_ip}= | 3ffe:63::2
+| ${prefix_length}= | 64
+
+
+*** Test Cases ***
+| TC01: VPP proxies valid DHCPv6 request to DHCPv6 server
+| | [Documentation] |
+| | ... | [Top] TG=DUT
+| | ... | [Cfg] On DUT setup DHCP proxy.
+| | ... | [Ver] Make TG verify matching DHCPv6 packets between client and \
+| | ... | DHCPv6 server through DHCPv6 proxy.
+| | ... | [Ref] RFC 3315
+| | ...
+| | Given Configure path in 2-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And Set interfaces in 2-node circular topology up
+| | And Vpp Set If Ipv6 Addr | ${dut_node}
+| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length}
+| | And Vpp Set If Ipv6 Addr | ${dut_node}
+| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length}
+| | And VPP Route Add | ${dut_node} | ff02::1:2 | 128 | ${NONE} | local
+| | ... | ${FALSE} | ${NONE}
+| | And Add IP Neighbor | ${dut_node} | ${dut_to_tg_if2} | ${dhcp_server_ip}
+| | ... | ${tg_to_dut_if2_mac}
+| | And Vpp All Ra Suppress Link Layer | ${nodes}
+| | When DHCP Proxy Config | ${dut_node} | ${dhcp_server_ip}
+| | ... | ${dut_to_tg_if1_ip}
+| | Then Send DHCPv6 Messages | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2}
+| | ... | ${dut_to_tg_if1_ip} | ${dut_to_tg_if1_mac} | ${dhcp_server_ip}
+| | ... | ${tg_to_dut_if2_mac} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if2_mac}
diff --git a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6ecmp-func.robot b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6ecmp-func.robot
new file mode 100644
index 0000000000..1f4b6c7270
--- /dev/null
+++ b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6ecmp-func.robot
@@ -0,0 +1,74 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/shared/counters.robot
+| Resource | resources/libraries/robot/shared/interfaces.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/ip/ip6.robot
+| Resource | resources/libraries/robot/shared/traffic.robot
+| Library | resources.libraries.python.Trace
+| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO
+| Test Setup | Set up functional test
+| Test Teardown | Tear down functional test
+| Documentation | *Ipv6 Multipath routing test cases*
+| ...
+| ... | *[Top] Network topologies:* TG=DUT 2-node topology with two links\
+| ... | between nodes.
+| ... | *[Cfg] DUT configuration:* On DUT configure interfaces IPv4 adresses,\
+| ... | and multipath routing.
+| ... | *[Ver] TG verification:* Test packets are sent from TG on the first\
+| ... | link to DUT. Packet is received on TG on the second link from DUT1.
+
+*** Variables ***
+| ${ip_1}= | 3ffe:61::1
+| ${ip_2}= | 3ffe:62::1
+| ${test_dst_ip}= | 3ffe:71::1
+| ${test_src_ip}= | 3ffe:51::1
+| ${prefix_length}= | 64
+| ${neighbor_1_ip}= | 3ffe:62::2
+| ${neighbor_1_mac}= | 02:00:00:00:00:02
+| ${neighbor_2_ip}= | 3ffe:62::3
+| ${neighbor_2_mac}= | 02:00:00:00:00:03
+
+*** Test Cases ***
+| TC01: IPv6 Equal-cost multipath routing
+| | [Documentation]
+| | ... | [Top] TG=DUT
+| | ... | [Cfg] On DUT configure multipath routing wiht two equal-cost paths.
+| | ... | [Ver] TG sends 100 IPv6 ICMP packets traffic on the first link to\
+| | ... | DUT. On second link to TG verify if traffic is divided into two paths.
+| | Given Configure path in 2-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And Set interfaces in 2-node circular topology up
+| | And Vpp Set If Ipv6 Addr | ${dut_node}
+| | ... | ${dut_to_tg_if2} | ${ip_1} | ${prefix_length}
+| | And Vpp Set If Ipv6 Addr | ${dut_node}
+| | ... | ${dut_to_tg_if1} | ${ip_2} | ${prefix_length}
+| | And Add Ip Neighbor
+| | ... | ${dut_node} | ${dut_to_tg_if1} | ${neighbor_1_ip} | ${neighbor_1_mac}
+| | And Add Ip Neighbor
+| | ... | ${dut_node} | ${dut_to_tg_if1} | ${neighbor_2_ip} | ${neighbor_2_mac}
+| | And Suppress ICMPv6 router advertisement message | ${nodes}
+| | When Vpp Route Add
+| | ... | ${dut_node} | ${test_dst_ip} | ${prefix_length} | ${neighbor_1_ip}
+| | ... | ${dut_to_tg_if1} | resolve_attempts=${NONE} | multipath=${TRUE}
+| | And Vpp Route Add
+| | ... | ${dut_node} | ${test_dst_ip} | ${prefix_length} | ${neighbor_2_ip}
+| | ... | ${dut_to_tg_if1} | resolve_attempts=${NONE} | multipath=${TRUE}
+| | Then Send packets and verify multipath routing | ${tg_node}
+| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1} | ${test_src_ip} | ${test_dst_ip}
+| | ... | ${tg_to_dut_if2_mac} | ${dut_to_tg_if2_mac} | ${dut_to_tg_if1_mac}
+| | ... | ${neighbor_1_mac} | ${neighbor_2_mac}
diff --git a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6ra-func.robot b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6ra-func.robot
new file mode 100644
index 0000000000..20fa1bd876
--- /dev/null
+++ b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ip6ra-func.robot
@@ -0,0 +1,107 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/shared/counters.robot
+| Resource | resources/libraries/robot/shared/interfaces.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/ip/ip6.robot
+| Resource | resources/libraries/robot/shared/traffic.robot
+| Library | resources.libraries.python.Trace
+| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO
+| Test Setup | Set up functional test
+| Test Teardown | Tear down functional test
+| Documentation | *IPv6 Router Advertisement test cases*
+| ...
+| ... | RFC4861 Neighbor Discovery. Encapsulations: Eth-IPv6-RA on links
+| ... | TG-DUT1. IPv6 Router Advertisement tests use 3-node topology TG - DUT1 -
+| ... | DUT2 - TG with one link between the nodes. DUT1 and DUT2 are configured
+| ... | with IPv6 routing and static routes. TG verifies received RA packets.
+
+
+*** Variables ***
+| ${dut1_to_tg_ip}= | 3ffe:62::1
+| ${tg_to_dut1_ip}= | 3ffe:62::2
+| ${prefix_length}= | 64
+| ${interval}= | 2
+
+*** Test Cases ***
+| TC01: DUT transmits RA on IPv6 enabled interface
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG.
+| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG.
+| | ... | [Ver] Make TG wait for IPv6 Router Advertisement packet to be sent\
+| | ... | by DUT1 and verify the received RA packet is correct.
+| | [Tags] | EXPECTED_FAILING
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | When Vpp RA Send After Interval | ${dut1_node} | ${dut1_to_tg}
+| | Then Receive and verify router advertisement packet
+| | ... | ${tg_node} | ${tg_to_dut1} | ${dut1_to_tg_mac}
+
+| TC02: DUT retransmits RA on IPv6 enabled interface after a set interval
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG.
+| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG.
+| | ... | [Ver] Make TG wait for two IPv6 Router Advertisement packets\
+| | ... | to be sent by DUT1 and verify the received RA packets are correct.
+| | [Tags] | EXPECTED_FAILING
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | When Vpp RA Send After Interval | ${dut1_node} | ${dut1_to_tg}
+| | ... | interval=${interval}
+| | :FOR | ${n} | IN RANGE | ${2}
+| | | Then Receive and verify router advertisement packet
+| | | ... | ${tg_node} | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${interval}
+
+| TC03: DUT responds to Router Solicitation request
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG.
+| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG and suppress\
+| | ... | sending of Router Advertisement packets periodically.
+| | ... | [Ver] Make TG send IPv6 Router Solicitation request to DUT1, listen\
+| | ... | for response from DUT1 and verify the received RA packet is correct.
+| | [Tags] | EXPECTED_FAILING
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | When VPP RA Suppress Link Layer | ${dut1_node} | ${dut1_to_tg}
+| | Then Send router solicitation and verify response
+| | ... | ${tg_node} | ${dut1_node} | ${tg_to_dut1} | ${dut1_to_tg}
+| | ... | ${tg_to_dut1_ip}
+
+| TC04: DUT responds to Router Solicitation request sent from link local address
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG.
+| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG and suppress\
+| | ... | sending of Router Advertisement packets periodically.
+| | ... | [Ver] Make TG send IPv6 Router Solicitation request to DUT1, listen\
+| | ... | for response from DUT1 and verify the received RA packet is correct.
+| | [Tags] | EXPECTED_FAILING
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | And Vpp Set If Ipv6 Addr | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | When VPP RA Suppress Link Layer | ${dut1_node} | ${dut1_to_tg}
+| | Then Send router solicitation and verify response
+| | ... | ${tg_node} | ${dut1_node} | ${tg_to_dut1} | ${dut1_to_tg}
diff --git a/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ipolicemarkbase-func.robot b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ipolicemarkbase-func.robot
new file mode 100644
index 0000000000..788d74ba92
--- /dev/null
+++ b/tests/vpp/func/ip6/eth2p-ethip6-ip6base-ipolicemarkbase-func.robot
@@ -0,0 +1,161 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Force Tags | 3_NODE_DOUBLE_LINK_TOPO | VM_ENV | HW_ENV
+| Resource | resources/libraries/robot/features/policer.robot
+| Library | resources.libraries.python.Trace
+| Test Setup | Run Keywords | Set up functional test
+| ... | AND | Configure topology for IPv6 policer test
+| Test Teardown | Tear down functional test
+| Documentation | *IPv6 policer test cases*
+| ...
+| ... | *[Top] Network topologies:* TG=DUT1 2-node topology with two links\
+| ... | between nodes.
+| ... | *[Cfg] DUT configuration:* On DUT1 configure interfaces IPv6 adresses,\
+| ... | and static neighbor record on the second interface.
+| ... | *[Ver] TG verification:* Test packet is sent from TG on the first link\
+| ... | to DUT1. Packet is received on TG on the second link from DUT1.
+| ... | *[Ref] Applicable standard specifications:* RFC2474, RFC2697, RFC2698.
+
+*** Variables ***
+| ${tg_to_dut_if1_ip6}= | 3ffe:5f::2
+| ${tg_to_dut_if2_ip6}= | 3ffe:60::2
+| ${dut_to_tg_if1_ip6}= | 3ffe:5f::1
+| ${dut_to_tg_if2_ip6}= | 3ffe:60::1
+| ${ip6_plen}= | ${64}
+
+| ${cir}= | ${100}
+| ${eir}= | ${150}
+| ${cb}= | ${200}
+| ${eb}= | ${300}
+
+*** Test Cases ***
+| TC01: VPP policer 2R3C Color-aware marks packet
+| | [Documentation]
+| | ... | [Top] TG=DUT1.
+| | ... | [Ref] RFC2474, RFC2698.
+| | ... | [Cfg] On DUT1 configure 2R3C color-aware policer on the first\
+| | ... | interface.
+| | ... | [Ver] TG sends IPv6 TCP packet on the first link to DUT1.\
+| | ... | On DUT1 packet is marked with DSCP tag. Verify if DUT1 sends\
+| | ... | correct IPv6 TCP packet with correct DSCP on the second link to TG.
+| | ${dscp}= | DSCP AF22
+| | Given Policer Set Name | policer1
+| | And Policer Set Node | ${dut_node}
+| | And Policer Set CIR | ${cir}
+| | And Policer Set EIR | ${eir}
+| | And Policer Set CB | ${cb}
+| | And Policer Set EB | ${eb}
+| | And Policer Set Rate Type pps
+| | And Policer Set Round Type Closest
+| | And Policer Set Type 2R3C 2698
+| | And Policer Set Conform Action Transmit
+| | And Policer Set Exceed Action Mark and Transmit | ${dscp}
+| | And Policer Set Violate Action Drop
+| | And Policer Enable Color Aware
+| | And Policer Classify Set Precolor Exceed
+| | And Policer Classify Set Interface | ${dut_to_tg_if1}
+| | And Policer Classify Set Match IP | ${tg_to_dut_if1_ip}
+| | When Policer Set Configuration
+| | Then Send packet and verify marking | ${tg_node} | ${tg_to_dut_if1}
+| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
+| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if2_ip} | ${dscp}
+
+| TC02: VPP policer 2R3C Color-blind marks packet
+| | [Documentation]
+| | ... | [Top] TG=DUT1.
+| | ... | [Ref] RFC2474, RFC2698.
+| | ... | [Cfg] On DUT1 configure 2R3C color-blind policer on the first\
+| | ... | interface.
+| | ... | [Ver] TG sends IPv6 TCP packet on the first link to DUT1.\
+| | ... | On DUT1 packet is marked with DSCP tag. Verify if DUT1 sends\
+| | ... | correct IPv6 TCP packet with correct DSCP on the second link to TG.
+| | ${dscp}= | DSCP AF22
+| | Given Policer Set Name | policer1
+| | And Policer Set Node | ${dut_node}
+| | And Policer Set CIR | ${cir}
+| | And Policer Set EIR | ${eir}
+| | And Policer Set CB | ${cb}
+| | And Policer Set EB | ${eb}
+| | And Policer Set Rate Type pps
+| | And Policer Set Round Type Closest
+| | And Policer Set Type 2R3C 2698
+| | And Policer Set Conform Action Mark and Transmit | ${dscp}
+| | And Policer Set Exceed Action Transmit
+| | And Policer Set Violate Action Drop
+| | And Policer Classify Set Precolor Conform
+| | And Policer Classify Set Interface | ${dut_to_tg_if1}
+| | And Policer Classify Set Match IP | ${tg_to_dut_if1_ip}
+| | When Policer Set Configuration
+| | Then Send packet and verify marking | ${tg_node} | ${tg_to_dut_if1}
+| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
+| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if2_ip} | ${dscp}
+
+| TC03: VPP policer 1R3C Color-aware marks packet
+| | [Documentation]
+| | ... | [Top] TG=DUT1.
+| | ... | [Ref] RFC2474, RFC2697.
+| | ... | [Cfg] On DUT1 configure 1R3C color-aware policer on the first\
+| | ... | interface.
+| | ... | [Ver] TG sends IPv6 TCP packet on the first link to DUT1.\
+| | ... | On DUT1 packet is marked with DSCP tag. Verify if DUT1 sends\
+| | ... | correct IPv6 TCP packet with correct DSCP on the second link to TG.
+| | ${dscp}= | DSCP AF22
+| | Given Policer Set Name | policer1
+| | And Policer Set Node | ${dut_node}
+| | And Policer Set CIR | ${1}
+| | And Policer Set CB | ${2}
+| | And Policer Set EB | ${eb}
+| | And Policer Set Rate Type pps
+| | And Policer Set Round Type Closest
+| | And Policer Set Type 1R3C
+| | And Policer Set Conform Action Transmit
+| | And Policer Set Exceed Action Mark and Transmit | ${dscp}
+| | And Policer Set Violate Action Drop
+| | And Policer Enable Color Aware
+| | And Policer Classify Set Precolor Exceed
+| | And Policer Classify Set Interface | ${dut_to_tg_if1}
+| | And Policer Classify Set Match IP | ${tg_to_dut_if1_ip}
+| | When Policer Set Configuration
+| | Then Send packet and verify marking | ${tg_node} | ${tg_to_dut_if1}
+| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
+| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if2_ip} | ${dscp}
+
+| TC04: VPP policer 1R3C Color-blind marks packet
+| | [Documentation]
+| | ... | [Top] TG=DUT1.
+| | ... | [Ref] RFC2474, RFC2697.
+| | ... | [Cfg] On DUT1 configure 1R3C color-blind policer on the first\
+| | ... | interface.
+| | ... | [Ver] TG sends IPv6 TCP packet on the first link to DUT1.\
+| | ... | On DUT1 packet is marked with DSCP tag. Verify if DUT1 sends\
+| | ... | correct IPv6 TCP packet with correct DSCP on the second link to TG.
+| | ${dscp}= | DSCP AF22
+| | Given Policer Set Name | policer1
+| | And Policer Set Node | ${dut_node}
+| | And Policer Set CIR | ${cir}
+| | And Policer Set CB | ${cb}
+| | And Policer Set Rate Type pps
+| | And Policer Set Round Type Closest
+| | And Policer Set Type 1R3C
+| | And Policer Set Conform Action Mark and Transmit | ${dscp}
+| | And Policer Set Exceed Action Transmit
+| | And Policer Set Violate Action Drop
+| | And Policer Classify Set Precolor Conform
+| | And Policer Classify Set Interface | ${dut_to_tg_if1}
+| | And Policer Classify Set Match IP | ${tg_to_dut_if1_ip}
+| | When Policer Set Configuration
+| | Then Send packet and verify marking | ${tg_node} | ${tg_to_dut_if1}
+| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
+| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if2_ip} | ${dscp}
diff --git a/tests/vpp/func/ip6/eth2p-ethip6-ip6basevrf-func.robot b/tests/vpp/func/ip6/eth2p-ethip6-ip6basevrf-func.robot
new file mode 100644
index 0000000000..cf0ed43a4a
--- /dev/null
+++ b/tests/vpp/func/ip6/eth2p-ethip6-ip6basevrf-func.robot
@@ -0,0 +1,409 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/ip/ip4.robot
+| Resource | resources/libraries/robot/ip/ip6.robot
+| Resource | resources/libraries/robot/shared/interfaces.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/shared/traffic.robot
+| Resource | resources/libraries/robot/l2/l2_traffic.robot
+| Library | resources.libraries.python.Trace
+| Library | resources.libraries.python.IPUtil
+| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO | SKIP_VPP_PATCH
+| Test Setup | Set up functional test
+| Test Teardown | Tear down functional test
+| Documentation | *Vpn routed forwarding - baseline IPv6*
+| ... | *[Top] Network Topologies:* TG=DUT1=DUT2=TG 3-node topology with two
+| ... | links in between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-ICMPv6
+| ... | *[Cfg] DUT configuration:* Each DUT is configured with two VRF tables;
+| ... | Separation of traffic is tested by IP packets; Neighbors and Routes are
+| ... | set on DUT nodes; IP addresses are set on DUT interfaces.
+| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets
+| ... | are sent by TG on link to DUT1, DUT2 or back to TG; On receipt TG
+| ... | verifies packets for correctness and their IPv6 src-addr, dst-addr,
+| ... | and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:*
+
+*** Variables ***
+| ${fib_table_1}= | 9
+| ${fib_table_2}= | 99
+
+| ${dut1_to_tg_ip1}= | 2001:62::3
+| ${dut1_to_tg_ip2}= | 2001:62::4
+| ${dut2_to_tg_ip1}= | 2003:62::3
+| ${dut2_to_tg_ip2}= | 2003:62::4
+
+| ${dut1_to_dut2_ip1}= | 2002:62::1
+| ${dut1_to_dut2_ip2}= | 2002:62::2
+| ${dut2_to_dut1_ip1}= | 2002:62::3
+| ${dut2_to_dut1_ip2}= | 2002:62::4
+
+| ${tg_dut1_ip1}= | 2001:62::1
+| ${tg_dut1_ip2}= | 2001:62::2
+| ${tg_dut2_ip1}= | 2003:62::1
+| ${tg_dut2_ip2}= | 2003:62::2
+
+| ${ip_prefix}= | 64
+| ${timeout}= | 5
+
+*** Test Cases ***
+| TC01: TG packets routed to DUT ingress interface, VPP configured with two VRFs
+| | [Documentation]
+| | ... | [Top] TG=DUT1=DUT2=TG
+| | ... | [Enc] Eth-IPv6-ICMPv6.
+| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
+| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
+| | ... | are configured with IP addresses from *Variables*. Neighbors are
+| | ... | configured for each DUTs ingress/egress ports, and each VRF is
+| | ... | configured with just one route.
+| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT1->TG-if1 and from
+| | ... | TG->DUT1-if2 to DUT1->TG-if2 and checked if arrived.
+| | Given Configure path in double-link 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in double-link 3-node circular topology up
+| | When Setup Env - 2xVRF Each Node
+| | Then Send ICMP echo request and verify answer | ${tg_node}
+| | ... | ${tg_to_dut1_if1} | ${dut1_to_tg_if1_mac}
+| | ... | ${tg_to_dut1_if1_mac} | ${dut1_to_tg_ip1}
+| | ... | ${tg_dut1_ip1} | ${timeout}
+| | And Send ICMP echo request and verify answer | ${tg_node}
+| | ... | ${tg_to_dut1_if2} | ${dut1_to_tg_if2_mac}
+| | ... | ${tg_to_dut1_if2_mac} | ${dut1_to_tg_ip2}
+| | ... | ${tg_dut1_ip2} | ${timeout}
+
+| TC02: TG packets routed to DUT egress interface, VPP configured with two VRFs
+| | [Documentation]
+| | ... | [Top] TG=DUT1=DUT2=TG
+| | ... | [Enc] Eth-IPv6-ICMPv6.
+| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
+| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
+| | ... | are configured with IP addresses from *Variables*. Neighbors are
+| | ... | configured for each DUTs ingress/egress ports, and each VRF is
+| | ... | configured with just one route.
+| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT1->DUT2-if1 and from
+| | ... | TG->DUT1-if2 to DUT1->DUT2-if2 and checked if arrived.
+| | Given Configure path in double-link 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in double-link 3-node circular topology up
+| | When Setup Env - 2xVRF Each Node
+| | Then Send ICMP echo request and verify answer | ${tg_node} | ${tg_to_dut1_if1}
+| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac}
+| | ... | ${dut1_to_dut2_ip1} | ${tg_dut1_ip1} | ${timeout}
+| | And Send ICMP echo request and verify answer | ${tg_node} | ${tg_to_dut1_if2}
+| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac}
+| | ... | ${dut1_to_dut2_ip2} | ${tg_dut1_ip2} | ${timeout}
+
+| TC03: TG packets routed to DUT2 ingress interface through DUT1, VPP configured with two VRFs
+| | [Documentation]
+| | ... | [Top] TG=DUT1=DUT2=TG
+| | ... | [Enc] Eth-IPv6-ICMPv6.
+| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
+| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
+| | ... | are configured with IP addresses from *Variables*. Neighbors are
+| | ... | configured for each DUTs ingress/egress ports, and each VRF is
+| | ... | configured with just one route.
+| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT2->DUT1-if1 and from
+| | ... | TG->DUT1-if2 to DUT2->DUT1-if2 and checked if arrived.
+| | Given Configure path in double-link 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in double-link 3-node circular topology up
+| | When Setup Env - 2xVRF Each Node
+| | Then Send ICMP echo request and verify answer | ${tg_node} | ${tg_to_dut1_if1}
+| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac}
+| | ... | ${dut2_to_dut1_ip1} | ${tg_dut1_ip1} | ${timeout}
+| | And Send ICMP echo request and verify answer | ${tg_node} | ${tg_to_dut1_if2}
+| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac}
+| | ... | ${dut2_to_dut1_ip2} | ${tg_dut1_ip2} | ${timeout}
+
+| TC04: TG packets routed to DUT2 egress interface through DUT1, VPP configured with two VRFs
+| | [Documentation]
+| | ... | [Top] TG=DUT1=DUT2=TG
+| | ... | [Enc] Eth-IPv6-ICMPv6.
+| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
+| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
+| | ... | are configured with IP addresses from *Variables*. Neighbors are
+| | ... | configured for each DUTs ingress/egress ports, and each VRF is
+| | ... | configured with just one route.
+| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT2->TG-if1 and from
+| | ... | TG->DUT1-if2 to DUT2->TG-if2 and checked if arrived.
+| | Given Configure path in double-link 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in double-link 3-node circular topology up
+| | When Setup Env - 2xVRF Each Node
+| | Then Send ICMP echo request and verify answer | ${tg_node} | ${tg_to_dut1_if1}
+| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac}
+| | ... | ${dut2_to_tg_ip1} | ${tg_dut1_ip1} | ${timeout}
+| | And Send ICMP echo request and verify answer | ${tg_node} | ${tg_to_dut1_if2}
+| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac}
+| | ... | ${dut2_to_tg_ip2} | ${tg_dut1_ip2} | ${timeout}
+
+| TC05: TG packets routed to TG through DUT1 and DUT2, VPP configured with two VRFs
+| | [Documentation]
+| | ... | [Top] TG=DUT1=DUT2=TG
+| | ... | [Enc] Eth-IPv6-ICMPv6.
+| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
+| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
+| | ... | are configured with IP addresses from *Variables*. Neighbors are
+| | ... | configured for each DUTs ingress/egress ports, and each VRF is
+| | ... | configured with just one route.
+| | ... | [Ver] Packet is sent from TG->DUT1-if1 to TG->DUT2-if1 and from
+| | ... | TG->DUT1-if2 to TG->DUT2-if2 and checked if arrived.
+| | Given Configure path in double-link 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in double-link 3-node circular topology up
+| | When Setup Env - 2xVRF Each Node
+| | Then Send packet and verify headers | ${tg_node} | ${tg_dut1_ip1}
+| | ... | ${tg_dut2_ip1} | ${tg_to_dut1_if1} | ${tg_to_dut1_if1_mac}
+| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut2_if1} | ${dut2_to_tg_if1_mac}
+| | ... | ${tg_to_dut2_if1_mac}
+| | And Send packet and verify headers | ${tg_node}
+| | ... | ${tg_dut1_ip2} | ${tg_dut2_ip2} | ${tg_to_dut1_if2}
+| | ... | ${tg_to_dut1_if2_mac} | ${dut1_to_tg_if2_mac} | ${tg_to_dut2_if2}
+| | ... | ${dut2_to_tg_if2_mac} | ${tg_to_dut2_if2_mac}
+
+| TC06: TG packets not routed to DUT ingress interface in different VRF, VPP configured with two VRFs
+| | [Documentation]
+| | ... | [Top] TG=DUT1=DUT2=TG
+| | ... | [Enc] Eth-IPv6-ICMPv6.
+| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
+| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
+| | ... | are configured with IP addresses from *Variables*. Neighbors are
+| | ... | configured for each DUTs ingress/egress ports, and each VRF is
+| | ... | configured with just one route.
+| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT1->TG-if2 where it
+| | ... | should not arrive.
+| | [Tags] | SKIP_PATCH
+| | Given Configure path in double-link 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in double-link 3-node circular topology up
+| | When Setup Env - 2xVRF Each Node
+| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
+| | ... | Send ICMP echo request and verify answer
+| | ... | ${tg_node} | ${tg_to_dut1_if1}
+| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac}
+| | ... | ${dut1_to_tg_ip2} | ${tg_dut1_ip1} | ${timeout}
+| | And Run Keyword And Expect Error | ICMP echo Rx timeout
+| | ... | Send ICMP echo request and verify answer
+| | ... | ${tg_node} | ${tg_to_dut1_if2}
+| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac}
+| | ... | ${dut1_to_tg_ip1} | ${tg_dut1_ip2} | ${timeout}
+
+| TC07: TG packets not routed to DUT egress interface in different VRF, VPP configured with two VRFs
+| | [Documentation]
+| | ... | [Top] TG=DUT1=DUT2=TG
+| | ... | [Enc] Eth-IPv6-ICMPv6.
+| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
+| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
+| | ... | are configured with IP addresses from *Variables*. Neighbors are
+| | ... | configured for each DUTs ingress/egress ports, and each VRF is
+| | ... | configured with just one route.
+| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT1->DUT2-if2 where it
+| | ... | should not arrive.
+| | [Tags] | SKIP_PATCH
+| | Given Configure path in double-link 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in double-link 3-node circular topology up
+| | When Setup Env - 2xVRF Each Node
+| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
+| | ... | Send ICMP echo request and verify answer
+| | ... | ${tg_node} | ${tg_to_dut1_if1}
+| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac}
+| | ... | ${dut1_to_dut2_ip2} | ${tg_dut1_ip1} | ${timeout}
+| | And Run Keyword And Expect Error | ICMP echo Rx timeout
+| | ... | Send ICMP echo request and verify answer
+| | ... | ${tg_node} | ${tg_to_dut1_if2}
+| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac}
+| | ... | ${dut1_to_dut2_ip1} | ${tg_dut1_ip2} | ${timeout}
+
+
+| TC08: TG packets not routed to DUT2 ingress interface in different VRF through DUT1, VPP configured with two VRFs
+| | [Documentation]
+| | ... | [Top] TG=DUT1=DUT2=TG
+| | ... | [Enc] Eth-IPv6-ICMPv6.
+| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
+| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
+| | ... | are configured with IP addresses from *Variables*. Neighbors are
+| | ... | configured for each DUTs ingress/egress ports, and each VRF is
+| | ... | configured with just one route.
+| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT2->DUT1-if2 where it
+| | ... | should not arrive.
+| | [Tags] | SKIP_PATCH
+| | Given Configure path in double-link 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in double-link 3-node circular topology up
+| | When Setup Env - 2xVRF Each Node
+| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
+| | ... | Send ICMP echo request and verify answer
+| | ... | ${tg_node} | ${tg_to_dut1_if1}
+| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac}
+| | ... | ${dut2_to_dut1_ip2} | ${tg_dut1_ip1} | ${timeout}
+| | And Run Keyword And Expect Error | ICMP echo Rx timeout
+| | ... | Send ICMP echo request and verify answer
+| | ... | ${tg_node} | ${tg_to_dut1_if2}
+| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac}
+| | ... | ${dut2_to_dut1_ip1} | ${tg_dut1_ip2} | ${timeout}
+
+| TC09: TG packets not routed to DUT2 egress interface in different VRF through DUT1, VPP configured with two VRFs
+| | [Documentation]
+| | ... | [Top] TG=DUT1=DUT2=TG
+| | ... | [Enc] Eth-IPv6-ICMPv6.
+| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
+| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
+| | ... | are configured with IP addresses from *Variables*. Neighbors are
+| | ... | configured for each DUTs ingress/egress ports, and each VRF is
+| | ... | configured with just one route.
+| | ... | [Ver] Packet is sent from TG->DUT1-if1 to DUT2->TG-if2 where it
+| | ... | should not arrive.
+| | [Tags] | SKIP_PATCH
+| | Given Configure path in double-link 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in double-link 3-node circular topology up
+| | When Setup Env - 2xVRF Each Node
+| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
+| | ... | Send ICMP echo request and verify answer
+| | ... | ${tg_node} | ${tg_to_dut1_if1}
+| | ... | ${dut1_to_tg_if1_mac} | ${tg_to_dut1_if1_mac}
+| | ... | ${dut2_to_tg_ip2} | ${tg_dut1_ip1} | ${timeout}
+| | And Run Keyword And Expect Error | ICMP echo Rx timeout
+| | ... | Send ICMP echo request and verify answer
+| | ... | ${tg_node} | ${tg_to_dut1_if2}
+| | ... | ${dut1_to_tg_if2_mac} | ${tg_to_dut1_if2_mac}
+| | ... | ${dut2_to_tg_ip1} | ${tg_dut1_ip2} | ${timeout}
+
+| TC10: TG packets not routed to TG in different VRF through DUT1 and DUT2, VPP configured with two VRFs
+| | [Documentation]
+| | ... | [Top] TG=DUT1=DUT2=TG.
+| | ... | [Enc] Eth-IPv6-ICMPv6.
+| | ... | [Cfg] DUT1 and DUT2 are both configured with two fib tables. Each
+| | ... | table is assigned to 2 interfaces to separate the traffic. Interfaces
+| | ... | are configured with IP addresses from *Variables*. Neighbors are
+| | ... | configured for each DUTs ingress/egress ports, and each VRF is
+| | ... | configured with just one route.
+| | ... | [Ver] Packet is sent from TG->DUT1-if1 to TG->DUT2-if2 where it
+| | ... | should not arrive.
+| | [Tags] | SKIP_PATCH
+| | Given Configure path in double-link 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in double-link 3-node circular topology up
+| | When Setup Env - 2xVRF Each Node
+| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
+| | ... | Send packet and verify headers | ${tg_node} | ${tg_dut1_ip1}
+| | ... | ${tg_dut2_ip2} | ${tg_to_dut1_if1}
+| | ... | ${tg_to_dut1_if1_mac} | ${dut1_to_tg_if1_mac} | ${tg_to_dut2_if2}
+| | ... | ${dut2_to_tg_if2_mac} | ${tg_to_dut2_if2_mac}
+| | And Run Keyword And Expect Error | ICMP echo Rx timeout
+| | ... | Send packet and verify headers | ${tg_node} | ${tg_dut1_ip2}
+| | ... | ${tg_dut2_ip1} | ${tg_to_dut1_if2}
+| | ... | ${tg_to_dut1_if2_mac} | ${dut1_to_tg_if2_mac} | ${tg_to_dut2_if1}
+| | ... | ${dut2_to_tg_if1_mac} | ${tg_to_dut2_if1_mac}
+
+*** Keywords ***
+| Setup Env - 2xVRF Each Node
+| | [Documentation]
+| | ... | Environment is set up with 2 fib tables on each DUT. DUT1-TG-IF1 and \
+| | ... | DUT1-DUT2-IF1 are assigned to FIB1, and DUT1-TG-IF2 and DUT1-DUT2-IF2
+| | ... | are assigned to FIB2 (the same done on DUT2, just opposite).
+| | ... | IP addresses and IP Neighbors are subsequently set for interfaces.
+| | ... | The last setting is route for each fib table.
+| | ...
+| | ${dut1_if1_idx}= | Get Interface SW Index
+| | ... | ${dut1_node} | ${dut1_to_dut2_if1}
+| | ${dut1_if2_idx}= | Get Interface SW Index
+| | ... | ${dut1_node} | ${dut1_to_dut2_if2}
+| | ${dut2_if1_idx}= | Get Interface SW Index
+| | ... | ${dut2_node} | ${dut2_to_dut1_if1}
+| | ${dut2_if2_idx}= | Get Interface SW Index
+| | ... | ${dut2_node} | ${dut2_to_dut1_if2}
+
+| | Assign Interface To Fib Table
+| | ... | ${dut1_node} | ${dut1_to_dut2_if1} | ${fib_table_1} | ipv6=${TRUE}
+| | Assign Interface To Fib Table
+| | ... | ${dut1_node} | ${dut1_to_dut2_if2} | ${fib_table_2} | ipv6=${TRUE}
+| | Assign Interface To Fib Table
+| | ... | ${dut1_node} | ${dut1_to_tg_if1} | ${fib_table_1} | ipv6=${TRUE}
+| | Assign Interface To Fib Table
+| | ... | ${dut1_node} | ${dut1_to_tg_if2} | ${fib_table_2} | ipv6=${TRUE}
+
+| | Assign Interface To Fib Table
+| | ... | ${dut2_node} | ${dut2_to_dut1_if1} | ${fib_table_1} | ipv6=${TRUE}
+| | Assign Interface To Fib Table
+| | ... | ${dut2_node} | ${dut2_to_dut1_if2} | ${fib_table_2} | ipv6=${TRUE}
+| | Assign Interface To Fib Table
+| | ... | ${dut2_node} | ${dut2_to_tg_if1} | ${fib_table_1} | ipv6=${TRUE}
+| | Assign Interface To Fib Table
+| | ... | ${dut2_node} | ${dut2_to_tg_if2} | ${fib_table_2} | ipv6=${TRUE}
+
+| | And Set Interface Address
+| | ... | ${dut1_node} | ${dut1_to_tg_if1} | ${dut1_to_tg_ip1} | ${ip_prefix}
+| | And Set Interface Address
+| | ... | ${dut1_node} | ${dut1_to_tg_if2} | ${dut1_to_tg_ip2} | ${ip_prefix}
+| | And Set Interface Address
+| | ... | ${dut1_node} | ${dut1_to_dut2_if1}
+| | ... | ${dut1_to_dut2_ip1} | ${ip_prefix}
+| | And Set Interface Address
+| | ... | ${dut1_node} | ${dut1_to_dut2_if2}
+| | ... | ${dut1_to_dut2_ip2} | ${ip_prefix}
+
+| | And Set Interface Address
+| | ... | ${dut2_node} | ${dut2_to_tg_if1} | ${dut2_to_tg_ip1} | ${ip_prefix}
+| | And Set Interface Address
+| | ... | ${dut2_node} | ${dut2_to_tg_if2} | ${dut2_to_tg_ip2} | ${ip_prefix}
+| | And Set Interface Address
+| | ... | ${dut2_node} | ${dut2_to_dut1_if1}
+| | ... | ${dut2_to_dut1_ip1} | ${ip_prefix}
+| | And Set Interface Address
+| | ... | ${dut2_node} | ${dut2_to_dut1_if2}
+| | ... | ${dut2_to_dut1_ip2} | ${ip_prefix}
+
+| | And Add IP Neighbor | ${dut1_node} | ${dut1_to_tg_if1}
+| | ... | ${tg_dut1_ip1} | ${tg_to_dut1_if1_mac}
+| | And Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2_if1}
+| | ... | ${dut2_to_dut1_ip1} | ${dut2_to_dut1_if1_mac}
+| | And Add IP Neighbor | ${dut2_node} | ${dut2_to_tg_if1}
+| | ... | ${tg_dut2_ip1} | ${tg_to_dut2_if1_mac}
+| | And Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1_if1}
+| | ... | ${dut1_to_dut2_ip1} | ${dut1_to_dut2_if1_mac}
+
+| | And Add IP Neighbor | ${dut1_node} | ${dut1_to_tg_if2}
+| | ... | ${tg_dut1_ip2} | ${tg_to_dut1_if2_mac}
+| | And Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2_if2}
+| | ... | ${dut2_to_dut1_ip2} | ${dut2_to_dut1_if2_mac}
+| | And Add IP Neighbor | ${dut2_node} | ${dut2_to_tg_if2}
+| | ... | ${tg_dut2_ip2} | ${tg_to_dut2_if2_mac}
+| | And Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1_if2}
+| | ... | ${dut1_to_dut2_ip2} | ${dut1_to_dut2_if2_mac}
+
+| | And Vpp Route Add | ${dut1_node} | ${tg_dut2_ip1} | ${ip_prefix}
+| | ... | ${dut2_to_dut1_ip1} | ${dut1_to_dut2_if1} | vrf=${fib_table_1}
+| | And Vpp Route Add | ${dut2_node} | ${tg_dut1_ip1} | ${ip_prefix}
+| | ... | ${dut1_to_dut2_ip1} | ${dut2_to_dut1_if1} | vrf=${fib_table_1}
+
+| | And Vpp Route Add | ${dut1_node} | ${tg_dut2_ip2} | ${ip_prefix}
+| | ... | ${dut2_to_dut1_ip2} | ${dut1_to_dut2_if2} | vrf=${fib_table_2}
+| | And Vpp Route Add | ${dut2_node} | ${tg_dut1_ip2} | ${ip_prefix}
+| | ... | ${dut1_to_dut2_ip2} | ${dut2_to_dut1_if2} | vrf=${fib_table_2}
+
+| | Vpp All RA Suppress Link Layer | ${nodes}