diff options
Diffstat (limited to 'tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-func.robot')
| -rw-r--r-- | tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-func.robot | 108 |
1 files changed, 108 insertions, 0 deletions
diff --git a/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-func.robot b/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-func.robot new file mode 100644 index 0000000000..08fc5c76c6 --- /dev/null +++ b/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-func.robot @@ -0,0 +1,108 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/shared/testing_path.robot +| Resource | resources/libraries/robot/ip/ip4.robot +| Resource | resources/libraries/robot/shared/traffic.robot +| Resource | resources/libraries/robot/overlay/lisp_static_adjacency.robot +| Resource | resources/libraries/robot/l2/l2_traffic.robot +| Library | resources.libraries.python.IPUtil +| Library | resources.libraries.python.Trace +# import additional Lisp settings from resource file +| Variables | resources/test_data/lisp/static_adjacency/lisp_static_adjacency.py +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO +| ... | VM_ENV | HW_ENV +| ... +| Test Setup | Set up functional test +| ... +| Test Teardown | Tear down functional test +| ... +| Documentation | *LISP static adjacency test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv4-ICMPv4 on\ +| ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv6\ +| ... | tunnel. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ +| ... | routing and static routes. LISPoIPv6 tunnel is configured\ +| ... | between DUT1 and DUT2. +| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets\ +| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive\ +| ... | TG verifies packets for correctness and their IPv4 src-addr,\ +| ... | dst-addr and MAC addresses. +| ... | *[Ref] Applicable standard specifications:* RFC6830. + +*** Test Cases *** +| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISPoIPv6 tunnel +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Enc] Eth-IPv6-LISP-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on\ +| | ... | TG-DUTn. +| | ... | [Cfg] On DUT1 and DUT2 configure IPv6 LISP static adjacencies. +| | ... | [Ver] Make TG send ICMPv4 Echo Req between its interfaces across both\ +| | ... | DUTs and LISP tunnel between them; verify IPv4 headers on received\ +| | ... | packets are correct. +| | ... | [Cfg2] Reconf LISP. +| | ... | [Ver2] Verify packets are received again via LISP tunnel. +| | ... | [Ref] RFC6830. +| | ... +| | Given Configure path in 3-node circular topology +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Set interfaces in 3-node circular topology up +| | And Configure IP addresses on interfaces +| | ... | ${dut1_node} | ${dut1_to_dut2} +| | ... | ${dut1_to_dut2_ip4o6} | ${dut_prefix4o6} +| | ... | ${dut1_node} | ${dut1_to_tg} +| | ... | ${dut1_to_tg_ip4o6} | ${tg_prefix4o6} +| | ... | ${dut2_node} | ${dut2_to_dut1} +| | ... | ${dut2_to_dut1_ip4o6} | ${dut_prefix4o6} +| | ... | ${dut2_node} | ${dut2_to_tg} +| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} +| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4o6} +| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4o6} +| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4o6} +| | ... | ${tg_to_dut2_mac} +| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4o6} +| | ... | ${tg_to_dut1_mac} +| | And Vpp All RA Suppress Link Layer | ${nodes} +| | When Configure LISP topology in 3-node circular topology +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid} +| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency} +| | Then Send packet and verify headers +| | ... | ${tg_node} | ${tg1_ip4o6} | ${tg2_ip4o6} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send packet and verify headers +| | ... | ${tg_node} | ${tg2_ip4o6} | ${tg1_ip4o6} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} +| | When Change LISP Configuration | ${dut1_node} | ${dut2_node} +| | ... | ${dut1_to_dut2} | ${dut2_to_dut1} | ${dut1_to_dut2_mac} +| | ... | ${dut2_to_dut1_mac} | ${dut1_to_dut2_ip4o6} +| | ... | ${dut2_to_dut1_ip4o6_reconf} | ${dut_prefix4o6} +| | ... | ${dut1_ip4o6_static_adjacency} +| | ... | ${dut1_ip4o6_static_adjacency_reconf} +| | Then Send packet and verify headers +| | ... | ${tg_node} | ${tg1_ip4o6} | ${tg2_ip4o6} +| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} +| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} +| | And Send packet and verify headers +| | ... | ${tg_node} | ${tg2_ip4o6} | ${tg1_ip4o6} +| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} +| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} |