aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/func/l2bd/eth2p-eth-l2bdbasemacstc-func.robot
diff options
context:
space:
mode:
Diffstat (limited to 'tests/vpp/func/l2bd/eth2p-eth-l2bdbasemacstc-func.robot')
-rw-r--r--tests/vpp/func/l2bd/eth2p-eth-l2bdbasemacstc-func.robot85
1 files changed, 85 insertions, 0 deletions
diff --git a/tests/vpp/func/l2bd/eth2p-eth-l2bdbasemacstc-func.robot b/tests/vpp/func/l2bd/eth2p-eth-l2bdbasemacstc-func.robot
new file mode 100644
index 0000000000..ce99a35fcb
--- /dev/null
+++ b/tests/vpp/func/l2bd/eth2p-eth-l2bdbasemacstc-func.robot
@@ -0,0 +1,85 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/vm/qemu.robot
+| Library | resources.libraries.python.Trace
+| Force Tags | HW_ENV | VM_ENV | SKIP_VPP_PATCH
+| Test Setup | Set up functional test
+| Test Teardown | Tear down functional test
+| Documentation | *L2 bridge-domain test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of
+| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply
+| ... | to all links.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
+| ... | bridge-domain (L2BD) switching combined with static MACs.
+| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets
+| ... | are sent in both directions by TG on links to DUT1 and DUT2; on
+| ... | receive TG verifies packets for correctness and their IPv4 (IPv6)
+| ... | src-addr, dst-addr and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:*
+
+*** Variables ***
+| ${bd_id1}= | 1
+| ${bd_id2}= | 2
+
+*** Test Cases ***
+| TC01: DUT1 and DUT2 with L2BD (static MACs) switch between two TG links
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 and \
+| | ... | DUT2 configure two i/fs into L2BD with static MACs. [Ver] Make
+| | ... | TG verify ICMPv4 Echo Req pkts are switched thru DUT1 and DUT2
+| | ... | in both directions and are correct on receive. [Ref]
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | When Create bridge domain | ${dut1_node} | ${bd_id1} | learn=${FALSE}
+| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg}
+| | ... | ${bd_id1}
+| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2}
+| | ... | ${bd_id1}
+| | And Add destination port to L2FIB | ${tg_node}
+| | ... | ${tg_to_dut1}
+| | ... | ${dut1_node}
+| | ... | ${dut1_to_tg}
+| | ... | ${bd_id1}
+| | And Add destination port to L2FIB | ${tg_node}
+| | ... | ${tg_to_dut2}
+| | ... | ${dut1_node}
+| | ... | ${dut1_to_dut2}
+| | ... | ${bd_id1}
+| | And Create bridge domain | ${dut2_node} | ${bd_id2}
+| | ... | learn=${FALSE}
+| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg}
+| | ... | ${bd_id2}
+| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_dut1}
+| | ... | ${bd_id2}
+| | And Add destination port to L2FIB | ${tg_node}
+| | ... | ${tg_to_dut1}
+| | ... | ${dut2_node}
+| | ... | ${dut2_to_dut1}
+| | ... | ${bd_id2}
+| | And Add destination port to L2FIB | ${tg_node}
+| | ... | ${tg_to_dut2}
+| | ... | ${dut2_node}
+| | ... | ${dut2_to_tg}
+| | ... | ${bd_id2}
+| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg_node} | ${tg_to_dut1}
+| | ... | ${tg_to_dut2}