aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/func/l2xc/eth2p-dot1ad--dot1q-l2xcbase-vlantrans21-func.robot
diff options
context:
space:
mode:
Diffstat (limited to 'tests/vpp/func/l2xc/eth2p-dot1ad--dot1q-l2xcbase-vlantrans21-func.robot')
-rw-r--r--tests/vpp/func/l2xc/eth2p-dot1ad--dot1q-l2xcbase-vlantrans21-func.robot189
1 files changed, 189 insertions, 0 deletions
diff --git a/tests/vpp/func/l2xc/eth2p-dot1ad--dot1q-l2xcbase-vlantrans21-func.robot b/tests/vpp/func/l2xc/eth2p-dot1ad--dot1q-l2xcbase-vlantrans21-func.robot
new file mode 100644
index 0000000000..c0e8c5c899
--- /dev/null
+++ b/tests/vpp/func/l2xc/eth2p-dot1ad--dot1q-l2xcbase-vlantrans21-func.robot
@@ -0,0 +1,189 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/l2/tagging.robot
+| Resource | resources/libraries/robot/l2/l2_traffic.robot
+| Library | resources.libraries.python.Trace
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV | SKIP_VPP_PATCH
+| Test Setup | Set up functional test
+| Test Teardown | Tear down functional test
+| Documentation | *L2XC with VLAN tag rewrite test cases - translate-2-1*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet encapsulations:* Eth-dot1ad-IPv4-ICMPv4 or
+| ... | Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, Eth-dot1q-IPv4-ICMPv4 or
+| ... | Eth-dot1aq-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2
+| ... | for L2 switching of IPv4/IPv6.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect
+| ... | (L2XC) switching between VLAN sub-interface with VLAN tag rewrite
+| ... | translate-2-1 method of interface towards TG and interface towards DUT2.
+| ... | DUT2 is configured configured with L2 cross-connect (L2XC) switching
+| ... | between VLAN sub-interface with VLAN tag rewrite pop-1 method
+| ... | of interface towards DUT1 and interface towards TG.
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are
+| ... | sent from TG on link to DUT1 and received in TG on link form DUT2;
+| ... | on receive TG verifies packets for correctness and their IPv4 src-addr,
+| ... | dst-addr and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q, IEEE 802.1ad.
+
+*** Variables ***
+| ${subid}= | 10
+
+| ${outer_vlan_id1}= | 110
+| ${outer_vlan_id2}= | 120
+| ${outer_vlan_wrong}= | 150
+
+| ${inner_vlan_id1}= | 210
+
+| ${src_ip}= | 3ffe:63::1
+| ${dst_ip}= | 3ffe:63::2
+
+*** Test Cases ***
+| TC01: DUT1 and DUT2 with L2XC and VLAN translate-2-1 (DUT1) switch ICMPv4 between two TG links
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1, \
+| | ... | Eth-dot1q-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2.
+| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to
+| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite
+| | ... | translate-2-1 method; on DUT2 configure L2 cross-connect (L2XC) with
+| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with
+| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv4 Echo Req
+| | ... | tagged with Dot1ad tags from one of its interfaces to another one
+| | ... | via DUT1 and DUT2; verify that packet is received.
+| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
+| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
+| | ... | type_subif=two_tags dot1ad
+| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2}
+| | And Configure L2 tag rewrite method on interface | ${dut1_node}
+| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_id2}
+| | And Configure L2 tag rewrite method on interface | ${dut2_node}
+| | ... | ${vlan2_index} | pop-1
+| | And Connect interfaces and VLAN sub-interfaces using L2XC
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
+| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
+| | Then Send ICMP packet and verify received packet
+| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1ad
+| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1}
+
+| TC02: DUT1 and DUT2 with L2XC and VLAN translate-2-1 with wrong tag used (DUT1) switch ICMPv4 between two TG links
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1, \
+| | ... | Eth-dot1q-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2.
+| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to
+| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite
+| | ... | translate-2-1 method to set tag different from tag set on VLAN
+| | ... | sub-interface of DUT2; on DUT2 configure L2 cross-connect (L2XC) with
+| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with
+| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv4 Echo Req
+| | ... | tagged with Dot1ad tags from one of its interfaces to another one
+| | ... | via DUT1 and DUT2; verify that packet is not received.
+| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
+| | [Tags] | SKIP_PATCH
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
+| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
+| | ... | type_subif=two_tags dot1ad
+| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2}
+| | And Configure L2 tag rewrite method on interface | ${dut1_node}
+| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_wrong}
+| | And Configure L2 tag rewrite method on interface | ${dut2_node}
+| | ... | ${vlan2_index} | pop-1
+| | And Connect interfaces and VLAN sub-interfaces using L2XC
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
+| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
+| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
+| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1}
+| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1}
+| | ... | vlan2=${inner_vlan_id1}
+
+| TC03: DUT1 and DUT2 with L2XC and VLAN translate-2-1 (DUT1) switch ICMPv6 between two TG links
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, \
+| | ... | Eth-dot1q-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2.
+| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to
+| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite
+| | ... | translate-2-1 method; on DUT2 configure L2 cross-connect (L2XC) with
+| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with
+| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv6 Echo Req
+| | ... | tagegd with Dot1ad tags from one of its interfaces to another one
+| | ... | via DUT1 and DUT2; verify that packet is received.
+| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
+| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
+| | ... | type_subif=two_tags dot1ad
+| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2}
+| | And Configure L2 tag rewrite method on interface | ${dut1_node}
+| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_id2}
+| | And Configure L2 tag rewrite method on interface | ${dut2_node}
+| | ... | ${vlan2_index} | pop-1
+| | And Connect interfaces and VLAN sub-interfaces using L2XC
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
+| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
+| | Then Send ICMP packet and verify received packet
+| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip}
+| | ... | dst_ip=${dst_ip} | encaps=Dot1ad | vlan1=${outer_vlan_id1}
+| | ... | vlan2=${inner_vlan_id1}
+
+| TC04: DUT1 and DUT2 with L2XC and VLAN translate-2-1 with wrong tag used (DUT1) switch ICMPv6 between two TG links
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, \
+| | ... | Eth-dot1q-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2.
+| | ... | [Cfg] On DUT1 configure L2 cross-connect (L2XC) with one interface to
+| | ... | DUT2 and one Dot1ad sub-interface towards TG with VLAN tag rewrite
+| | ... | translate-2-1 method to set tag different from tag set on VLAN
+| | ... | sub-interface of DUT2; on DUT2 configure L2 cross-connect (L2XC) with
+| | ... | one interface to TG and one VLAN sub-interface towards DUT1 with
+| | ... | VLAN tag rewrite pop-1 method. [Ver] Make TG send ICMPv6 Echo Req
+| | ... | tagegd with Dot1ad tags from one of its interfaces to another one
+| | ... | via DUT1 and DUT2; verify that packet is not received.
+| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad
+| | [Tags] | SKIP_PATCH
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid}
+| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1}
+| | ... | type_subif=two_tags dot1ad
+| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${outer_vlan_id2}
+| | And Configure L2 tag rewrite method on interface | ${dut1_node}
+| | ... | ${vlan1_index} | translate-2-1 | tag1_id=${outer_vlan_wrong}
+| | And Configure L2 tag rewrite method on interface | ${dut2_node}
+| | ... | ${vlan2_index} | pop-1
+| | And Connect interfaces and VLAN sub-interfaces using L2XC
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index}
+| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index}
+| | Then Run Keyword And Expect Error | ICMP echo Rx timeout
+| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1}
+| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1ad
+| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1}