diff options
Diffstat (limited to 'tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-vlantrans22-func.robot')
| -rw-r--r-- | tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-vlantrans22-func.robot | 346 |
1 files changed, 0 insertions, 346 deletions
diff --git a/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-vlantrans22-func.robot b/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-vlantrans22-func.robot deleted file mode 100644 index 14406da97f..0000000000 --- a/tests/vpp/func/l2xc/eth2p-dot1ad-l2xcbase-vlantrans22-func.robot +++ /dev/null @@ -1,346 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/l2/tagging.robot -| Resource | resources/libraries/robot/l2/l2_traffic.robot -| Library | resources.libraries.python.Trace -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV | SKIP_VPP_PATCH -| Test Setup | Set up functional test -| Test Teardown | Tear down functional test -| Documentation | *L2XC with VLAN tag rewrite test cases - translate-2-2* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet encapsulations:* Eth-dot1ad-IPv4-ICMPv4 or -| ... | Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and DUT1-DUT2, Eth-IPv4-ICMPv4 or -| ... | Eth-IPv6-ICMPv6 on TG-DUT2 for L2 switching of IPv4/IPv6. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect -| ... | (L2XC) switching between VLAN sub-interface with VLAN tag rewrite -| ... | translate-2-2 method of interface towards TG and interface towards DUT2. -| ... | DUT2 is configured configured with L2 cross-connect (L2XC) switching -| ... | between VLAN sub-interface with VLAN tag rewrite pop-2 method -| ... | of interface towards DUT1 and interface towards TG. -| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are -| ... | sent from TG on link to DUT1 and received in TG on link form DUT2; -| ... | on receive TG verifies packets for correctness and their IPv4 src-addr, -| ... | dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q, IEEE 802.1ad. - -*** Variables *** -| ${subid}= | 10 - -| ${outer_vlan_id1}= | 110 -| ${outer_vlan_id2}= | 120 -| ${outer_vlan_wrong}= | 150 - -| ${inner_vlan_id1}= | 210 -| ${inner_vlan_id2}= | 220 -| ${inner_vlan_wrong}= | 250 - -| ${src_ip}= | 3ffe:63::1 -| ${dst_ip}= | 3ffe:63::2 - -*** Test Cases *** -| TC01: DUT1 and DUT2 with L2XC and VLAN translate-2-2 switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method; -| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG and -| | ... | one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1 -| | ... | tagged with Dot1ad tags from one of its interfaces to another one -| | ... | method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; verify -| | ... | that packet is received. [Ref] IEEE 802.1ad -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id2} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Connect interfaces and VLAN sub-interfaces using L2XC -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} -| | Then Send ICMP packet and verify received packet -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1ad -| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} - -| TC02: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong inner tag used (DUT1) switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to -| | ... | set inner tag different from inner tag set on Dot1ad sub-interface of -| | ... | DUT2; on DUT2 configure L2 cross-connect (L2XC) with one interface to -| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite -| | ... | pop-1 tagged with Dot1ad tags from one of its interfaces to another one -| | ... | method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; verify -| | ... | that packet is not received. [Ref] IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_wrong} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Connect interfaces and VLAN sub-interfaces using L2XC -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} -| | ... | vlan2=${inner_vlan_id1} - -| TC03: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong outer tag used (DUT1) switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to -| | ... | set outer tag different from outer tag set on Dot1ad sub-interface of -| | ... | DUT2; on DUT2 configure L2 cross-connect (L2XC) with one interface to -| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite -| | ... | pop-1 tagged with Dot1ad tags from one of its interfaces to another -| | ... | one method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; -| | ... | verify that packet is not received. [Ref] IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id2} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Connect interfaces and VLAN sub-interfaces using L2XC -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} -| | ... | vlan2=${inner_vlan_id1} - -| TC04: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong outer and inner tags used (DUT1) switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv4-ICMPv4 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to -| | ... | set tags different from tags set on Dot1ad sub-interface of DUT2; -| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG -| | ... | and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1 -| | ... | tagged with Dot1ad tags from one of its interfaces to another one -| | ... | method. [Ver] Make TG send ICMPv4 Echo Req via DUT1 and DUT2; verify -| | ... | that packet is not received. [Ref] IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_wrong} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Connect interfaces and VLAN sub-interfaces using L2XC -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | encaps=Dot1ad | vlan1=${outer_vlan_id1} -| | ... | vlan2=${inner_vlan_id1} - -| TC05: DUT1 and DUT2 with L2XC and VLAN translate-2-2 switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method; -| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG and -| | ... | one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1 -| | ... | tagegd with Dot1ad tags from one of its interfaces to another one -| | ... | method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; verify -| | ... | that packet is received. [Ref] IEEE 802.1ad -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id2} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Connect interfaces and VLAN sub-interfaces using L2XC -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} -| | Then Send ICMP packet and verify received packet -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip} -| | ... | dst_ip=${dst_ip} | encaps=Dot1ad | vlan1=${outer_vlan_id1} -| | ... | vlan2=${inner_vlan_id1} - -| TC06: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong inner tag used (DUT1) switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to -| | ... | set inner tag different from inner tag set on Dot1ad sub-interface of -| | ... | DUT2; on DUT2 configure L2 cross-connect (L2XC) with one interface to -| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite -| | ... | pop-1 tagegd with Dot1ad tags from one of its interfaces to another one -| | ... | method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; verify -| | ... | that packet is not received. [Ref] IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_wrong} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Connect interfaces and VLAN sub-interfaces using L2XC -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1ad -| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} - -| TC07: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong outer tag used (DUT1) switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to -| | ... | set outer tag different from outer tag set on Dot1ad sub-interface of -| | ... | DUT2; on DUT2 configure L2 cross-connect (L2XC) with one interface to -| | ... | TG and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite -| | ... | pop-1 tagegd with Dot1ad tags from one of its interfaces to another -| | ... | one method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; -| | ... | verify that packet is not received. [Ref] IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id2} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Connect interfaces and VLAN sub-interfaces using L2XC -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1ad -| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} - -| TC08: DUT1 and DUT2 with L2XC and VLAN translate-2-2 with wrong outer and inner tags used (DUT1) switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and \ -| | ... | on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. [Cfg] On DUT1 configure L2 -| | ... | cross-connect (L2XC) with one interface to DUT2 and one Dot1ad -| | ... | sub-interface towards TG with VLAN tag rewrite translate-2-2 method to -| | ... | set tags different from tags set on Dot1ad sub-interface of DUT2; -| | ... | on DUT2 configure L2 cross-connect (L2XC) with one interface to TG -| | ... | and one Dot1ad sub-interface towards DUT1 with VLAN tag rewrite pop-1 -| | ... | tagegd with Dot1ad tags from one of its interfaces to another one -| | ... | method. [Ver] Make TG send ICMPv6 Echo Req via DUT1 and DUT2; verify -| | ... | that packet is not received. [Ref] IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create tagged sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id1} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-2-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_wrong} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Connect interfaces and VLAN sub-interfaces using L2XC -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${vlan1_index} -| | ... | ${dut2_node} | ${dut2_to_tg} | ${vlan2_index} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | src_ip=${src_ip} | dst_ip=${dst_ip} | encaps=Dot1ad -| | ... | vlan1=${outer_vlan_id1} | vlan2=${inner_vlan_id1} |