aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/func/vm_vhost/ip6/eth2p-ethip6ipsectptlispgpe-ip4base-eth-2vhost-1vm-func.robot
diff options
context:
space:
mode:
Diffstat (limited to 'tests/vpp/func/vm_vhost/ip6/eth2p-ethip6ipsectptlispgpe-ip4base-eth-2vhost-1vm-func.robot')
-rw-r--r--tests/vpp/func/vm_vhost/ip6/eth2p-ethip6ipsectptlispgpe-ip4base-eth-2vhost-1vm-func.robot181
1 files changed, 0 insertions, 181 deletions
diff --git a/tests/vpp/func/vm_vhost/ip6/eth2p-ethip6ipsectptlispgpe-ip4base-eth-2vhost-1vm-func.robot b/tests/vpp/func/vm_vhost/ip6/eth2p-ethip6ipsectptlispgpe-ip4base-eth-2vhost-1vm-func.robot
deleted file mode 100644
index d2083612d0..0000000000
--- a/tests/vpp/func/vm_vhost/ip6/eth2p-ethip6ipsectptlispgpe-ip4base-eth-2vhost-1vm-func.robot
+++ /dev/null
@@ -1,181 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.topology.Topology
-| Library | resources.libraries.python.NodePath
-| Library | resources.libraries.python.Trace
-| Library | resources.libraries.python.IPUtil
-| Library | resources.libraries.python.L2Util
-| Library | resources.libraries.python.LispUtil
-| Library | resources.libraries.python.IPsecUtil
-| Library | resources.libraries.python.VatJsonUtil
-| Library | resources.libraries.python.IPv6Setup
-| Library | resources.libraries.python.VhostUser
-| Library | resources.libraries.python.VPPUtil
-| Library | String
-| Resource | resources/libraries/robot/shared/traffic.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/ip/ip6.robot
-| Resource | resources/libraries/robot/crypto/ipsec.robot
-| Resource | resources/libraries/robot/overlay/lispgpe.robot
-| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot
-# Import configuration and test data:
-| Variables | resources/test_data/lisp/ipv4_lispgpe_ipv6/ipv4_lispgpe_ipsec_ipv6.py
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP | SKIP_VPP_PATCH
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down LISP functional test with QEMU
-| ...
-| Documentation | *IPv6 - ip4-ipsec-lispgpe-ip6 - main fib, virt2lisp, phy2lisp*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISPGPE-IPSec-IPv4-ICMP,\
-| ... | Eth-IPv6-IPSec-LISPGPE-IPv4-ICMP
-| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec.\
-| ... | IPsec is in transport mode. Test cases are for IPsec configured both\
-| ... | on RLOC interface or lisp_gpe0 interface.
-| ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1 to\
-| ... | DUT2 where it is forwarded to TG(if2).
-| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303.
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 route IPv4 over Vhost to LISP GPE tunnel using IPsec (transport) on RLOC Int.
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Enc] Eth-IPv6-LISPGPE-IPSec-IPv4-ICMP on DUT1-DUT2, Eth-IPv4-ICMP\
-| | ... | on TG-DUTn.
-| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\
-| | ... | IPsec in between DUTS. Create Qemu vm on DUT1 and configure bridge\
-| | ... | between two vhosts.
-| | ... | [Ver] Case: ip6-ipsec-lispgpe-ip4 - main fib, virt2lisp\
-| | ... | Make TG send ICMPv6 Echo Req between its interfaces across\
-| | ... | both DUTs and LISP GPE tunnel between them; verify IPv6 headers on\
-| | ... | received packets are correct.
-| | ... | [Ref] RFC6830, RFC4303.
-| | ...
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Setup Topology And Lisp
-| | And Setup Qemu DUT1
-| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | When Configure manual keyed connection for IPSec
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key}
-| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi}
-| | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6}
-| | And Configure manual keyed connection for IPSec
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key}
-| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi}
-| | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6}
-| | Then Send packet and verify headers
-| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers
-| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-
-| TC02: DUT1 and DUT2 route IPv4 over Vhost to LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int.
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Enc] Eth-IPv6-IPSec-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2,\
-| | ... | Eth-IPv6-ICMPv6, on TG-DUTn.
-| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\
-| | ... | IPsec in between DUTS.
-| | ... | [Ver] Case: ip6-ipsec-lispgpe-ip4 - main fib, virt2lisp\
-| | ... | Make TG send ICMPv6 Echo Req between its interfaces across\
-| | ... | both DUTs and LISP GPE tunnel between them; verify IPv6 headers on\
-| | ... | received packets are correct.
-| | ... | [Ref] RFC6830, RFC4303.
-| | ...
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Setup Topology And Lisp
-| | And Setup Qemu DUT1
-| | ${lisp1_if_idx}= | resources.libraries.python.InterfaceUtil.get sw if index
-| | ... | ${dut1_node} | ${lisp_gpe_int}
-| | ${lisp2_if_idx}= | resources.libraries.python.InterfaceUtil.get sw if index
-| | ... | ${dut2_node} | ${lisp_gpe_int}
-| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | When Configure manual keyed connection for IPSec
-| | ... | ${dut1_node} | ${lisp1_if_idx} | ${encr_alg} | ${encr_key}
-| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi}
-| | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6}
-| | And Configure manual keyed connection for IPSec
-| | ... | ${dut2_node} | ${lisp2_if_idx} | ${encr_alg} | ${encr_key}
-| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi}
-| | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6}
-| | Then Send packet and verify headers
-| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers
-| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-
-*** Keywords ***
-| Setup Topology And Lisp
-| | [Documentation] | Setup IPs and neighbors for interfaces on DUT1 and DUT2\
-| | ... | and then setup LISP.
-| | Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | Set interfaces in 3-node circular topology up
-| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6}
-| | ... | ${prefix6}
-| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6}
-| | ... | ${prefix6}
-| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4}
-| | ... | ${prefix4}
-| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6}
-| | ... | ${prefix6}
-| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4}
-| | ... | ${prefix4}
-| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4}
-| | ... | ${tg_to_dut2_mac}
-| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6}
-| | ... | ${dut2_to_dut1_mac}
-| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6}
-| | ... | ${dut1_to_dut2_mac}
-| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4}
-| | ... | ${tg_to_dut1_mac}
-| | Vpp All RA Suppress Link Layer | ${nodes}
-| | Configure LISP GPE topology in 3-node circular topology
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
-| | ... | ${dut1_to_dut2_ip_static_adjacency}
-| | ... | ${dut2_to_dut1_ip_static_adjacency}
-
-| Setup Qemu DUT1
-| | [Documentation] | Setup Vhosts on DUT1 and setup IP to one of them. Setup\
-| | ... | Qemu and bridge the vhosts.
-| | ${vhost1}= | And Vpp Create Vhost User Interface | ${dut1_node} | ${sock1}
-| | ${vhost2}= | And Vpp Create Vhost User Interface | ${dut1_node} | ${sock2}
-| | Set Interface Address | ${dut1_node} | ${vhost2} | ${vhost_ip} | ${prefix4}
-| | Set Interface State | ${dut1_node} | ${vhost1} | up
-| | Set Interface State | ${dut1_node} | ${vhost2} | up
-| | Create bridge domain | ${dut1_node} | ${bid} | learn=${TRUE}
-| | Add interface to bridge domain | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${bid} | 0
-| | Add interface to bridge domain | ${dut1_node}
-| | ... | ${vhost1} | ${bid} | 0
-| | ${vhost_mac}= | Get Vhost User Mac By SW Index | ${dut1_node} | ${vhost2}
-| | Set test variable | ${dst_vhost_mac} | ${vhost_mac}
-| | Configure VM for vhost L2BD forwarding | ${dut1_node} | ${sock1} | ${sock2}