diff options
Diffstat (limited to 'tests/vpp/func/vm_vhost/ip6')
4 files changed, 0 insertions, 650 deletions
diff --git a/tests/vpp/func/vm_vhost/ip6/eth2p-ethip6ipsectptlispgpe-ip4base-eth-2vhost-1vm-func.robot b/tests/vpp/func/vm_vhost/ip6/eth2p-ethip6ipsectptlispgpe-ip4base-eth-2vhost-1vm-func.robot deleted file mode 100644 index d2083612d0..0000000000 --- a/tests/vpp/func/vm_vhost/ip6/eth2p-ethip6ipsectptlispgpe-ip4base-eth-2vhost-1vm-func.robot +++ /dev/null @@ -1,181 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.topology.Topology -| Library | resources.libraries.python.NodePath -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.L2Util -| Library | resources.libraries.python.LispUtil -| Library | resources.libraries.python.IPsecUtil -| Library | resources.libraries.python.VatJsonUtil -| Library | resources.libraries.python.IPv6Setup -| Library | resources.libraries.python.VhostUser -| Library | resources.libraries.python.VPPUtil -| Library | String -| Resource | resources/libraries/robot/shared/traffic.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/ip/ip6.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| Resource | resources/libraries/robot/overlay/lispgpe.robot -| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot -# Import configuration and test data: -| Variables | resources/test_data/lisp/ipv4_lispgpe_ipv6/ipv4_lispgpe_ipsec_ipv6.py -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP | SKIP_VPP_PATCH -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down LISP functional test with QEMU -| ... -| Documentation | *IPv6 - ip4-ipsec-lispgpe-ip6 - main fib, virt2lisp, phy2lisp* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISPGPE-IPSec-IPv4-ICMP,\ -| ... | Eth-IPv6-IPSec-LISPGPE-IPv4-ICMP -| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec.\ -| ... | IPsec is in transport mode. Test cases are for IPsec configured both\ -| ... | on RLOC interface or lisp_gpe0 interface. -| ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1 to\ -| ... | DUT2 where it is forwarded to TG(if2). -| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303. - -*** Test Cases *** -| TC01: DUT1 and DUT2 route IPv4 over Vhost to LISP GPE tunnel using IPsec (transport) on RLOC Int. -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv6-LISPGPE-IPSec-IPv4-ICMP on DUT1-DUT2, Eth-IPv4-ICMP\ -| | ... | on TG-DUTn. -| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTS. Create Qemu vm on DUT1 and configure bridge\ -| | ... | between two vhosts. -| | ... | [Ver] Case: ip6-ipsec-lispgpe-ip4 - main fib, virt2lisp\ -| | ... | Make TG send ICMPv6 Echo Req between its interfaces across\ -| | ... | both DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Setup Topology And Lisp -| | And Setup Qemu DUT1 -| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} -| | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6} -| | And Configure manual keyed connection for IPSec -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} -| | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6} -| | Then Send packet and verify headers -| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers -| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -| TC02: DUT1 and DUT2 route IPv4 over Vhost to LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int. -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv6-IPSec-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2,\ -| | ... | Eth-IPv6-ICMPv6, on TG-DUTn. -| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTS. -| | ... | [Ver] Case: ip6-ipsec-lispgpe-ip4 - main fib, virt2lisp\ -| | ... | Make TG send ICMPv6 Echo Req between its interfaces across\ -| | ... | both DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Setup Topology And Lisp -| | And Setup Qemu DUT1 -| | ${lisp1_if_idx}= | resources.libraries.python.InterfaceUtil.get sw if index -| | ... | ${dut1_node} | ${lisp_gpe_int} -| | ${lisp2_if_idx}= | resources.libraries.python.InterfaceUtil.get sw if index -| | ... | ${dut2_node} | ${lisp_gpe_int} -| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut1_node} | ${lisp1_if_idx} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} -| | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6} -| | And Configure manual keyed connection for IPSec -| | ... | ${dut2_node} | ${lisp2_if_idx} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} -| | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6} -| | Then Send packet and verify headers -| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers -| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -*** Keywords *** -| Setup Topology And Lisp -| | [Documentation] | Setup IPs and neighbors for interfaces on DUT1 and DUT2\ -| | ... | and then setup LISP. -| | Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | Set interfaces in 3-node circular topology up -| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} -| | ... | ${prefix6} -| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} -| | ... | ${prefix6} -| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} -| | ... | ${prefix4} -| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} -| | ... | ${prefix6} -| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} -| | ... | ${prefix4} -| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4} -| | ... | ${tg_to_dut2_mac} -| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_dut1_mac} -| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6} -| | ... | ${dut1_to_dut2_mac} -| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4} -| | ... | ${tg_to_dut1_mac} -| | Vpp All RA Suppress Link Layer | ${nodes} -| | Configure LISP GPE topology in 3-node circular topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} -| | ... | ${dut1_to_dut2_ip_static_adjacency} -| | ... | ${dut2_to_dut1_ip_static_adjacency} - -| Setup Qemu DUT1 -| | [Documentation] | Setup Vhosts on DUT1 and setup IP to one of them. Setup\ -| | ... | Qemu and bridge the vhosts. -| | ${vhost1}= | And Vpp Create Vhost User Interface | ${dut1_node} | ${sock1} -| | ${vhost2}= | And Vpp Create Vhost User Interface | ${dut1_node} | ${sock2} -| | Set Interface Address | ${dut1_node} | ${vhost2} | ${vhost_ip} | ${prefix4} -| | Set Interface State | ${dut1_node} | ${vhost1} | up -| | Set Interface State | ${dut1_node} | ${vhost2} | up -| | Create bridge domain | ${dut1_node} | ${bid} | learn=${TRUE} -| | Add interface to bridge domain | ${dut1_node} -| | ... | ${dut1_to_tg} | ${bid} | 0 -| | Add interface to bridge domain | ${dut1_node} -| | ... | ${vhost1} | ${bid} | 0 -| | ${vhost_mac}= | Get Vhost User Mac By SW Index | ${dut1_node} | ${vhost2} -| | Set test variable | ${dst_vhost_mac} | ${vhost_mac} -| | Configure VM for vhost L2BD forwarding | ${dut1_node} | ${sock1} | ${sock2} diff --git a/tests/vpp/func/vm_vhost/ip6/eth2p-ethip6ipsectptlispgpe-ip6base-eth-2vhost-1vm-func.robot b/tests/vpp/func/vm_vhost/ip6/eth2p-ethip6ipsectptlispgpe-ip6base-eth-2vhost-1vm-func.robot deleted file mode 100644 index 69a5b71c57..0000000000 --- a/tests/vpp/func/vm_vhost/ip6/eth2p-ethip6ipsectptlispgpe-ip6base-eth-2vhost-1vm-func.robot +++ /dev/null @@ -1,200 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.topology.Topology -| Library | resources.libraries.python.NodePath -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.L2Util -| Library | resources.libraries.python.LispUtil -| Library | resources.libraries.python.VPPUtil -| Library | resources.libraries.python.IPsecUtil -| Library | resources.libraries.python.VatJsonUtil -| Library | resources.libraries.python.IPv6Setup -| Library | resources.libraries.python.VhostUser -| Library | String -| Resource | resources/libraries/robot/shared/traffic.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/ip/ip6.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| Resource | resources/libraries/robot/overlay/lispgpe.robot -| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot -# Import configuration and test data: -| Variables | resources/test_data/lisp/ipv6_lispgpe_ipv6/ipv6_lispgpe_ipsec_ipv6.py -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP | SKIP_VPP_PATCH -| ... | EXPECTED_FAILING -| ... -| Test Setup | Run Keywords | Set up functional test -| ... | AND | Vpp All Ra Suppress Link Layer | ${nodes} -| ... -| Test Teardown | Tear down LISP functional test with QEMU -| ... -| Documentation | *IPv6 - ip6-ipsec-lispgpe-ip6 - main fib, -| ... | vrf (gpe_vni-to-vrf), phy2lisp, virt2lisp* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-IPSec-LISPGPE-IPv6-ICMPv6,\ -| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec.\ -| ... | IPsec is in transport mode. Tests cases are for IPsec configured both\ -| ... | on RLOC interface or lisp_gpe0 interface. -| ... | *[Ver] TG verification:* Packet is send from TG(if1) across the DUT1\ -| ... | via VM to DUT2 where it is forwarded to TG(if2). -| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303. - -*** Variables *** -| ${dut2_spi}= | ${1000} -| ${dut1_spi}= | ${1001} - -| ${ESP_PROTO}= | ${50} - -| ${sock1}= | /tmp/sock1 -| ${sock2}= | /tmp/sock2 - -| ${bid}= | 10 - -*** Test Cases *** -| TC01: DUT1 and DUT2 route IPv6 over Vhost to LISP GPE tunnel using IPsec (transport) on RLOC Int. -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv6-IPSec-LISPGPE-IPv6-ICMP on DUT1-DUT2, Eth-IPv6-ICMP\ -| | ... | on TG-DUTn. -| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTS. Create Qemu vm on DUT1 and configure bridge\ -| | ... | between two vhosts. -| | ... | [Ver] Case: ip6-ipsec-lispgpe-ip6 - main fib, virt2lisp\ -| | ... | Make TG send ICMPv6 Echo Req between its interfaces across\ -| | ... | both DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Setup Topology -| | And Setup Qemu DUT1 -| | And Configure LISP GPE topology in 3-node circular topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_to_dut2_ip6_static_adjacency} -| | ... | ${dut2_to_dut1_ip6_static_adjacency} -| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} -| | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6} -| | And Configure manual keyed connection for IPSec -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} -| | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6} -| | Then Send packet and verify headers -| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers -| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -| TC02: DUT1 and DUT2 route IPv6 over Vhost to LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int. -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv6-IPSec-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2,\ -| | ... | Eth-IPv6-ICMPv6 on TG-DUTn. -| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with\ -| | ... | IPsec in between DUTS. -| | ... | [Ver] Case: ip6-ipsec-lispgpe-ip6 - main fib, virt2lisp\ -| | ... | Make TG send ICMPv6 Echo Req between its interfaces across\ -| | ... | both DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830, RFC4303. -| | ... -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Setup Topology -| | And Setup Qemu DUT1 -| | And Configure LISP GPE topology in 3-node circular topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_to_dut2_ip6_static_adjacency} -| | ... | ${dut2_to_dut1_ip6_static_adjacency} -| | ${lisp1_if_idx}= | resources.libraries.python.InterfaceUtil.get sw if index -| | ... | ${dut1_node} | lisp_gpe0 -| | ${lisp2_if_idx}= | resources.libraries.python.InterfaceUtil.get sw if index -| | ... | ${dut2_node} | lisp_gpe0 -| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Configure manual keyed connection for IPSec -| | ... | ${dut1_node} | ${lisp1_if_idx} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} -| | ... | ${dut1_to_dut2_ip6} | ${dut2_to_dut1_ip6} -| | And Configure manual keyed connection for IPSec -| | ... | ${dut2_node} | ${lisp2_if_idx} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} -| | ... | ${dut2_to_dut1_ip6} | ${dut1_to_dut2_ip6} -| | Then Send packet and verify headers -| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers -| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -*** Keywords *** -| Setup Topology -| | Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | Set interfaces in 3-node circular topology up -| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} -| | ... | ${prefix6} -| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} -| | ... | ${prefix6} -| | Vpp Set If IPv6 Addr | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} -| | ... | ${prefix6} -| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} -| | ... | ${prefix6} -| | Vpp Set If IPv6 Addr | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} -| | ... | ${prefix6} -| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6} -| | ... | ${tg_to_dut1_mac} -| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6} -| | ... | ${tg_to_dut2_mac} -| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_dut1_mac} -| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6} -| | ... | ${dut1_to_dut2_mac} -| | Vpp All RA Suppress Link Layer | ${nodes} - -| Setup Qemu DUT1 -| | [Documentation] | Setup Vhosts on DUT1 and setup IP to one of them. Setup \ -| | ... | Qemu and bridge the vhosts. -| | ${vhost1}= | And Vpp Create Vhost User Interface | ${dut1_node} | ${sock1} -| | ${vhost2}= | And Vpp Create Vhost User Interface | ${dut1_node} | ${sock2} -| | Vpp Set If IPv6 Addr | ${dut1_node} | ${vhost2} | 2001:cdba:1::9 -| | ... | ${prefix6} -| | Set Interface State | ${dut1_node} | ${vhost1} | up -| | Set Interface State | ${dut1_node} | ${vhost2} | up -| | Vpp RA Suppress Link Layer | ${dut1_node} | ${vhost2} -| | Create bridge domain | ${dut1_node} | ${bid} | learn=${TRUE} -| | Add interface to bridge domain | ${dut1_node} -| | ... | ${dut1_to_tg} | ${bid} | 0 -| | Add interface to bridge domain | ${dut1_node} -| | ... | ${vhost1} | ${bid} | 0 -| | ${vhost_mac}= | Get Vhost User Mac By SW Index | ${dut1_node} | ${vhost2} -| | Set test variable | ${dst_vhost_mac} | ${vhost_mac} -| | Configure VM for vhost L2BD forwarding | ${dut1_node} | ${sock1} | ${sock2} diff --git a/tests/vpp/func/vm_vhost/ip6/eth2p-ethip6lispgpe-ip6base-eth-2vhost-1vm-func.robot b/tests/vpp/func/vm_vhost/ip6/eth2p-ethip6lispgpe-ip6base-eth-2vhost-1vm-func.robot deleted file mode 100644 index c19a2b042b..0000000000 --- a/tests/vpp/func/vm_vhost/ip6/eth2p-ethip6lispgpe-ip6base-eth-2vhost-1vm-func.robot +++ /dev/null @@ -1,130 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.topology.Topology -| Library | resources.libraries.python.NodePath -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.IPv6Setup -| Library | resources.libraries.python.VPPUtil -| Resource | resources/libraries/robot/shared/traffic.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot -| Resource | resources/libraries/robot/overlay/lispgpe.robot -# Import configuration and test data: -| Variables | resources/test_data/lisp/ipv6_lispgpe_ipv6/ipv6_lispgpe_ipv6.py -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP -| ... -| Test Setup | Run Keywords | Set up functional test -| ... | AND | Vpp All Ra Suppress Link Layer | ${nodes} -| ... -| Test Teardown | Tear down LISP functional test with QEMU -| ... -| Documentation | *ip6-lispgpe-ip6 encapsulation test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv6-ICMPv6 on DUT1-DUT2,\ -| ... | Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and static routes. LISPoIPv6 tunnel is configured between\ -| ... | DUT1 and DUT2. -| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in\ -| ... | both directions by TG on links to DUT1 and DUT2; on receive\ -| ... | TG verifies packets for correctness and their IPv6 src-addr, dst-addr\ -| ... | and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC6830. - -*** Test Cases *** -| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using vhost interfaces -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv6-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\ -| | ... | TG-DUTn. -| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2. -| | ... | [Ver] Case: ip6-ipsec-lispgpe-ip6 - main fib, virt2lisp -| | ... | Make TG send ICMPv6 Echo Req between its interfaces across both\ -| | ... | DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ -| | ... | received packets are correct. -| | ... -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And Vpp Set If IPv6 Addr -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} | ${prefix6} -| | And Vpp Set If IPv6 Addr -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} | ${prefix6} -| | And Vpp Set If IPv6 Addr -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} | ${prefix6} -| | And Vpp Set If IPv6 Addr -| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} | ${prefix6} -| | And Add IP Neighbors -| | And Vpp All RA Suppress Link Layer | ${nodes} -| | When Configure LISP GPE topology in 3-node circular topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_to_dut2_ip6_static_adjacency} -| | ... | ${dut2_to_dut1_ip6_static_adjacency} -| | And Setup Qemu DUT1 -| | Then Send packet and verify headers -| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers -| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -*** Keywords *** -| Setup Qemu DUT1 -| | [Documentation] | Setup Vhosts on DUT1 and setup IP on one of them. Setup\ -| | ... | Qemu and bridge the vhosts. Optionally, you can set fib table ID\ -| | ... | where the vhost2 interface should be assigned to. -| | ... -| | [Arguments] | ${fib_table}=0 -| | ... -| | ${vhost1}= | Vpp Create Vhost User Interface | ${dut1_node} | ${sock1} -| | ${vhost2}= | Vpp Create Vhost User Interface | ${dut1_node} | ${sock2} -| | And Add Fib Table | ${dut1_node} | ${fib_table} | ipv6={TRUE} -| | Assign Interface To Fib Table | ${dut1_node} -| | ... | ${vhost2} | ${fib_table} | ipv6=${TRUE} -| | Vpp Set If IPv6 Addr | ${dut1_node} | ${vhost2} | ${vhost_ip} -| | ... | ${prefix6} -| | Set Interface State | ${dut1_node} | ${vhost1} | up -| | Set Interface State | ${dut1_node} | ${vhost2} | up -| | Create bridge domain | ${dut1_node} | ${bid} | learn=${TRUE} -| | Add interface to bridge domain | ${dut1_node} -| | ... | ${dut1_to_tg} | ${bid} | 0 -| | Add interface to bridge domain | ${dut1_node} -| | ... | ${vhost1} | ${bid} | 0 -| | ${vhost_mac}= | Get Vhost User Mac By SW Index | ${dut1_node} | ${vhost2} -| | Set test variable | ${dst_vhost_mac} | ${vhost_mac} -| | Configure VM for vhost L2BD forwarding | ${dut1_node} | ${sock1} | ${sock2} - -| Add IP Neighbors -| | [Documentation] -| | ... | Add IP neighbors to physical interfaces on DUTs. -| | ... -| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6} -| | ... | ${tg_to_dut1_mac} -| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6} -| | ... | ${tg_to_dut2_mac} -| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_dut1_mac} -| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6} -| | ... | ${dut1_to_dut2_mac} diff --git a/tests/vpp/func/vm_vhost/ip6/eth2p-ethip6lispgpe-ip6basevrf-eth-2vhost-1vm-func.robot b/tests/vpp/func/vm_vhost/ip6/eth2p-ethip6lispgpe-ip6basevrf-eth-2vhost-1vm-func.robot deleted file mode 100644 index 5b0dc9c0d5..0000000000 --- a/tests/vpp/func/vm_vhost/ip6/eth2p-ethip6lispgpe-ip6basevrf-eth-2vhost-1vm-func.robot +++ /dev/null @@ -1,139 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.topology.Topology -| Library | resources.libraries.python.NodePath -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.IPv6Setup -| Library | resources.libraries.python.VPPUtil -| Resource | resources/libraries/robot/shared/traffic.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot -| Resource | resources/libraries/robot/overlay/lispgpe.robot -# Import configuration and test data: -| Variables | resources/test_data/lisp/ipv6_lispgpe_ipv6/ipv6_lispgpe_ipv6.py -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP -| ... -| Test Setup | Run Keywords | Set up functional test -| ... | AND | Vpp All Ra Suppress Link Layer | ${nodes} -| ... -| Test Teardown | Tear down LISP functional test with QEMU -| ... -| Documentation | *ip6-lispgpe-ip6 encapsulation test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv6-ICMPv6 on DUT1-DUT2,\ -| ... | Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ -| ... | routing and static routes. LISPoIPv6 tunnel is configured between\ -| ... | DUT1 and DUT2. -| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in\ -| ... | both directions by TG on links to DUT1 and DUT2; on receive\ -| ... | TG verifies packets for correctness and their IPv6 src-addr, dst-addr\ -| ... | and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* RFC6830. - -*** Test Cases *** -| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using vhost interfaces and VRF is enabled -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. -| | ... | [Enc] Eth-IPv6-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\ -| | ... | TG-DUTn. -| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2. -| | ... | [Ver] Case: ip6-lispgpe-ip6 - vrf, virt2lisp -| | ... | Make TG send ICMPv6 Echo Req between its interfaces across both\ -| | ... | DUTs and LISP GPE tunnel between them; verify IPv6 headers on\ -| | ... | received packets are correct. -| | ... | [Ref] RFC6830. -| | ... -| | ... -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And Add Fib Table | ${dut1_node} | ${fib_table_1} | ipv6=${TRUE} -| | And Add Fib Table | ${dut2_node} | ${fib_table_1} | ipv6=${TRUE} -| | And Assign Interface To Fib Table | ${dut1_node} -| | ... | ${dut1_to_tg} | ${fib_table_1} | ipv6=${TRUE} -| | And Assign Interface To Fib Table | ${dut2_node} -| | ... | ${dut2_to_tg} | ${fib_table_1} | ipv6=${TRUE} -| | And Vpp Set If IPv6 Addr -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} | ${prefix6} -| | And Vpp Set If IPv6 Addr -| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} | ${prefix6} -| | And Vpp Set If IPv6 Addr -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} | ${prefix6} -| | And Vpp Set If IPv6 Addr -| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} | ${prefix6} -| | And Add IP Neighbors -| | And Vpp All RA Suppress Link Layer | ${nodes} -| | When Configure LISP GPE topology in 3-node circular topology -| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE} -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_to_dut2_ip6_static_adjacency} -| | ... | ${dut2_to_dut1_ip6_static_adjacency} -| | ... | ${dut1_dut2_vni} | ${fib_table_1} -| | And Setup Qemu DUT1 | ${fib_table_1} -| | Then Send packet and verify headers -| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6} -| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac} -| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac} -| | And Send packet and verify headers -| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6} -| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac} -| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac} - -*** Keywords *** -| Setup Qemu DUT1 -| | [Documentation] | Setup Vhosts on DUT1 and setup IP on one of them. Setup\ -| | ... | Qemu and bridge the vhosts. Optionally, you can set fib table ID\ -| | ... | where the vhost2 interface should be assigned to. -| | ... -| | [Arguments] | ${fib_table}=0 -| | ... -| | ${vhost1}= | Vpp Create Vhost User Interface | ${dut1_node} | ${sock1} -| | ${vhost2}= | Vpp Create Vhost User Interface | ${dut1_node} | ${sock2} -| | And Add Fib Table | ${dut1_node} | ${fib_table} | ipv6=${TRUE} -| | Assign Interface To Fib Table | ${dut1_node} -| | ... | ${vhost2} | ${fib_table} | ipv6=${TRUE} -| | Vpp Set If IPv6 Addr | ${dut1_node} | ${vhost2} | ${vhost_ip} -| | ... | ${prefix6} -| | Set Interface State | ${dut1_node} | ${vhost1} | up -| | Set Interface State | ${dut1_node} | ${vhost2} | up -| | Create bridge domain | ${dut1_node} | ${bid} | learn=${TRUE} -| | Add interface to bridge domain | ${dut1_node} -| | ... | ${dut1_to_tg} | ${bid} | 0 -| | Add interface to bridge domain | ${dut1_node} -| | ... | ${vhost1} | ${bid} | 0 -| | ${vhost_mac}= | Get Vhost User Mac By SW Index | ${dut1_node} | ${vhost2} -| | Set test variable | ${dst_vhost_mac} | ${vhost_mac} -| | Configure VM for vhost L2BD forwarding | ${dut1_node} | ${sock1} | ${sock2} - -| Add IP Neighbors -| | [Documentation] -| | ... | Add IP neighbors to physical interfaces on DUTs. -| | ... -| | Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6} -| | ... | ${tg_to_dut1_mac} -| | Add IP Neighbor | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6} -| | ... | ${tg_to_dut2_mac} -| | Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_dut1_mac} -| | Add IP Neighbor | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6} -| | ... | ${dut1_to_dut2_mac} |