diff options
Diffstat (limited to 'tests/vpp/func')
6 files changed, 0 insertions, 802 deletions
diff --git a/tests/vpp/func/telemetry/eth2p-ethip4-ip4base-ip4ipfixbase-func.robot b/tests/vpp/func/telemetry/eth2p-ethip4-ip4base-ip4ipfixbase-func.robot deleted file mode 100644 index 27b254bc11..0000000000 --- a/tests/vpp/func/telemetry/eth2p-ethip4-ip4base-ip4ipfixbase-func.robot +++ /dev/null @@ -1,205 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.Classify.Classify -| Library | resources.libraries.python.telemetry.IPFIXSetup -| Library | resources.libraries.python.Trace -| ... -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/telemetry/ipfix.robot -| ... -| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *IPFIX ipv4 test cases* -| ... -| ... | IPFIX tests use 3-node topology TG - DUT1 - DUT2 - TG with -| ... | one link between the nodes. DUT1 is configured with IPv4 -| ... | routing and static routes. IPFIX is configured on DUT1 with -| ... | DUT1->TG interface as collector. Test packets are -| ... | sent from TG to DUT1. TG listens for flow report packets -| ... | and verifies that they contains flow record of test packets sent. - -*** Variables *** -| ${dut1_to_tg_ip}= | 192.168.1.1 -| ${tg_to_dut1_ip}= | 192.168.1.2 -| ${dut2_to_dut1_ip}= | 192.168.2.1 -| ${prefix_length}= | 24 -| ${ip_version}= | ip4 -| ${port}= | 80 - -*** Test Cases *** -| TC01: DUT sends IPFIX template and data packets -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface -| | ... | address as collector and a basic classify session. -| | ... | [Ver] Make TG listen for IPFIX template and data packets, verify -| | ... | that packet is received and correct. No packets are sent from TG. -| | ... | [Ref] RFC 7011 -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And VPP Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip} -| | ... | ${tg_to_dut1_mac} -| | ${table_index} | ${skip_n} | ${match_n}= -| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | src -| | And VPP configures classify session L3 | ${dut1_node} | permit -| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | src -| | ... | ${tg_to_dut1_ip} -| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg} -| | ... | ${table_index} | ip_version=${ip_version} -| | And Setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip} -| | ... | ${dut1_to_tg_ip} | interval=5 -| | And Set IPFIX stream | ${dut1_node} | ${1} -| | And Assign classify table to exporter | ${dut1_node} | ${table_index} -| | ... | ${ip_version} -| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node} -| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip} -| | ... | count=0 - -| TC02: DUT reports packet flow for traffic by source address -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface -| | ... | address as collector and add classify session with TG source address. -| | ... | [Ver] Make TG send a packet to DUT1, then listen for IPFIX template -| | ... | and data packets, verify that IPFIX reported the received packet. -| | ... | [Ref] RFC 7011 -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And VPP Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip} -| | ... | ${tg_to_dut1_mac} -| | ${table_index} | ${skip_n} | ${match_n}= -| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | src -| | And VPP configures classify session L3 | ${dut1_node} | permit -| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | src -| | ... | ${tg_to_dut1_ip} -| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg} -| | ... | ${table_index} | ip_version=${ip_version} -| | And Setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip} -| | ... | ${dut1_to_tg_ip} | interval=5 -| | And Set IPFIX stream | ${dut1_node} | ${1} -| | And Assign classify table to exporter | ${dut1_node} | ${table_index} -| | ... | ${ip_version} -| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node} -| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip} - -| TC03: DUT reports packet flow for traffic with local destination address -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface -| | ... | address as collector and add classify session with destination -| | ... | address of DUT1. -| | ... | [Ver] Make TG send a packet to DUT1, then listen for IPFIX template -| | ... | and data packets, verify that IPFIX reported the received packet. -| | ... | [Ref] RFC 7011 -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And VPP Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip} -| | ... | ${tg_to_dut1_mac} -| | ${table_index} | ${skip_n} | ${match_n}= -| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | dst -| | And VPP configures classify session L3 | ${dut1_node} | permit -| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | dst -| | ... | ${dut1_to_tg_ip} -| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg} -| | ... | ${table_index} | ip_version=${ip_version} -| | And Setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip} -| | ... | ${dut1_to_tg_ip} | interval=5 -| | And Set IPFIX stream | ${dut1_node} | ${1} -| | And Assign classify table to exporter | ${dut1_node} | ${table_index} -| | ... | ${ip_version} -| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node} -| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip} - -| TC04: DUT reports packet flow for traffic with remote destination address -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface -| | ... | address as collector and add classify session with destination -| | ... | address of DUT2. -| | ... | [Ver] Make TG send a packet to DUT2 through DUT1, then listen -| | ... | for IPFIX template and data packets, verify that IPFIX reported -| | ... | the received packet. -| | ... | [Ref] RFC 7011 -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And VPP Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip} -| | ... | ${tg_to_dut1_mac} -| | And VPP Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${dut2_to_dut1_ip} | ${dut2_to_dut1_mac} -| | ${table_index} | ${skip_n} | ${match_n}= -| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | dst -| | And VPP configures classify session L3 | ${dut1_node} | permit -| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | dst -| | ... | ${dut2_to_dut1_ip} -| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg} -| | ... | ${table_index} | ip_version=${ip_version} -| | And Setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip} -| | ... | ${dut1_to_tg_ip} | interval=5 -| | And Set IPFIX stream | ${dut1_node} | ${1} -| | And Assign classify table to exporter | ${dut1_node} | ${table_index} -| | ... | ${ip_version} -| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node} -| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut2_to_dut1_ip} - -| TC05: DUT reports packet flow for traffic by source and destination port -| | [Tags] | SKIP_VPP_PATCH -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface -| | ... | address as collector and add classify session with TG source address -| | ... | and source and destination ports. -| | ... | [Ver] Make TG send a packet to DUT1, then listen for IPFIX template -| | ... | and data packets, verify that IPFIX reported the received packet. -| | ... | [Ref] RFC 7011 -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And VPP Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip} -| | ... | ${tg_to_dut1_mac} -| | ${table_index} | ${skip_n} | ${match_n}= -| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} -| | ... | src proto l4 src_port dst_port -| | And VPP configures classify session generic | ${dut1_node} -| | ... | acl-hit-next permit | ${table_index} | ${skip_n} | ${match_n} -| | ... | l3 ${ip_version} src ${tg_to_dut1_ip} -| | ... | proto 6 l4 src_port ${port} dst_port ${port} -| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg} -| | ... | ${table_index} | ip_version=${ip_version} -| | And Setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip} -| | ... | ${dut1_to_tg_ip} | interval=5 -| | And Set IPFIX stream | ${dut1_node} | ${1} -| | And Assign classify table to exporter | ${dut1_node} | ${table_index} -| | ... | ${ip_version} -| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node} -| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip} -| | ... | port=${port} - -# TODO: DUT reports packet flow when ACL is configured with wildcards diff --git a/tests/vpp/func/telemetry/eth2p-ethip4-ip4base-ip4ipfixscale-func.robot b/tests/vpp/func/telemetry/eth2p-ethip4-ip4base-ip4ipfixscale-func.robot deleted file mode 100644 index 41f86b4a36..0000000000 --- a/tests/vpp/func/telemetry/eth2p-ethip4-ip4base-ip4ipfixscale-func.robot +++ /dev/null @@ -1,115 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.Classify.Classify -| Library | resources.libraries.python.telemetry.IPFIXSetup -| Library | resources.libraries.python.Trace -| ... -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/telemetry/ipfix.robot -| ... -| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | SKIP_VPP_PATCH -| ... | EXPECTED_FAILING -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *IPFIX ipv4 test cases* -| ... -| ... | IPFIX tests use 3-node topology TG - DUT1 - DUT2 - TG with -| ... | one link between the nodes. DUT1 is configured with IPv4 -| ... | routing and static routes. IPFIX is configured on DUT1 with -| ... | DUT1->TG interface as collector. Test packets are -| ... | sent from TG to DUT1. TG listens for flow report packets -| ... | and verifies that they contains flow record of test packets sent. - -*** Variables *** -| ${dut1_to_tg_ip}= | 192.168.1.1 -| ${tg_to_dut1_ip}= | 192.168.1.2 -| ${prefix_length}= | 24 -| ${ip_version}= | ip4 -| ${sessions}= | 80 - -*** Test Cases *** -| TC01: DUT reports packet flow with a large number of packets -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface -| | ... | address as collector and add classify session with TG source address. -| | ... | [Ver] Make TG send packets to DUT1, then listen for IPFIX template -| | ... | and data packets, verify that IPFIX reported the received packets. -| | ... | [Ref] RFC 7011 -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And VPP Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip} -| | ... | ${tg_to_dut1_mac} -| | ${table_index} | ${skip_n} | ${match_n}= -| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | src -| | And VPP configures classify session L3 | ${dut1_node} | permit -| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | src -| | ... | ${tg_to_dut1_ip} -| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg} -| | ... | ${table_index} | ip_version=${ip_version} -| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip} -| | ... | ${dut1_to_tg_ip} | interval=5 -| | And Set IPFIX stream | ${dut1_node} | ${1} -| | And Assign classify table to exporter | ${dut1_node} | ${table_index} -| | ... | ${ip_version} -| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node} -| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip} -| | ... | count=20000 | timeout=10 - -| TC02: DUT reports packet flow when multiple sessions are configured -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface -| | ... | address as collector and add several classify sessions with different -| | ... | ports. -| | ... | [Ver] Make TG send packets to DUT1 using a range of ports matching -| | ... | configured sessions, then listen for IPFIX template and data packets, -| | ... | verify that IPFIX reported the received packets for each session. -| | ... | [Ref] RFC 7011 -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And VPP Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip} -| | ... | ${tg_to_dut1_mac} -| | ${table_index} | ${skip_n} | ${match_n}= -| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} -| | ... | src proto l4 src_port dst_port -| | :FOR | ${index} | IN RANGE | ${sessions} -| | | VPP configures classify session generic | ${dut1_node} -| | | ... | acl-hit-next permit | ${table_index} | ${skip_n} | ${match_n} -| | | ... | l3 ${ip_version} src ${tg_to_dut1_ip} -| | | ... | proto 6 l4 src_port ${index} dst_port ${index} -| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg} -| | ... | ${table_index} | ip_version=${ip_version} -| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip} -| | ... | ${dut1_to_tg_ip} -| | ... | mtu=1450 | interval=5 -| | And Set IPFIX stream | ${dut1_node} | ${1} -| | And Assign classify table to exporter | ${dut1_node} | ${table_index} -| | ... | ${ip_version} -| | Then Send session sweep and verify IPFIX | ${tg_node} | ${dut1_node} -| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip} -| | ... | ${sessions} | timeout=10 | count=3 - -# TODO: DUT reports packet flow when ACL is configured with wildcards diff --git a/tests/vpp/func/telemetry/eth2p-ethip4-ip4base-spanrx-func.robot b/tests/vpp/func/telemetry/eth2p-ethip4-ip4base-spanrx-func.robot deleted file mode 100644 index d3cf5636fd..0000000000 --- a/tests/vpp/func/telemetry/eth2p-ethip4-ip4base-spanrx-func.robot +++ /dev/null @@ -1,83 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.Trace -| Library | resources.libraries.python.telemetry.SPAN -| ... -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/telemetry/span.robot -| ... -| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *SPAN test suite* -| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two -| ... | links between nodes. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with SPAN mirroring from -| ... | the first DUT1-TG interface to the second one. -| ... | *[Ver] TG verification:* Test ARP or ICMP packets are sent by TG -| ... | on first link to DUT1; On receipt through second link TG verifies -| ... | the copy of packet sent and the copy of DUT's reply packet. -| ... | *[Ref] Applicable standard specifications: None?* - -*** Variables *** -| ${tg_to_dut_if1_ip4}= | 192.168.1.1 -| ${dut_to_tg_if1_ip4}= | 192.168.1.2 -| ${prefix}= | 24 - -*** Test Cases *** -| TC01: DUT mirrors L2 packets from one interface to another -| | [Documentation] -| | ... | [Top] TG=DUT1 -| | ... | [Cfg] On DUT1 configure IPv4 address and set SPAN mirroring\ -| | ... | from one DUT interface to the other. -| | ... | [Ver] Make TG send an ARP packet to DUT through one interface,\ -| | ... | then receive a copy of sent packet and of DUT's ARP reply\ -| | ... | on the second interface. -| | Given Configure path in 2-node circular topology | ${nodes['TG']} -| | ... | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | And VPP Interface Set IP Address | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${dut_to_tg_if1_ip4} | ${prefix} -| | And Set SPAN Mirroring | ${dut_node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} -| | Then Send Packet And Check Received Copies | ${tg_node} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${dut_to_tg__if1_mac} | ${tg_to_dut_if2} -| | ... | ${tg_to_dut_if1_ip4} | ${dut_to_tg_if1_ip4} | ARP - -| TC02: DUT mirrors IPv4 packets from one interface to another -| | [Documentation] -| | ... | [Top] TG=DUT1 -| | ... | [Cfg] On DUT1 configure IPv4 address, add ARP entry for one TG \ -| | ... | interface and set SPAN mirroring from one DUT interface to the other. -| | ... | [Ver] Make TG send an ICMP packet to DUT through one interface,\ -| | ... | then receive a copy of sent packet and of DUT's ICMP reply\ -| | ... | on the other interface. -| | Given Configure path in 2-node circular topology | ${nodes['TG']} -| | ... | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | And VPP Interface Set IP Address | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${dut_to_tg_if1_ip4} | ${prefix} -| | And VPP Add IP Neighbor | ${dut_node} | ${dut_to_tg_if1} -| | ... | ${tg_to_dut_if1_ip4} | ${tg_to_dut_if1_mac} -| | And Set SPAN Mirroring | ${dut_node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} -| | Then Send Packet And Check Received Copies | ${tg_node} -| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${dut_to_tg__if1_mac} | ${tg_to_dut_if2} -| | ... | ${tg_to_dut_if1_ip4} | ${dut_to_tg_if1_ip4} | ICMP diff --git a/tests/vpp/func/telemetry/eth2p-ethip6-ip6base-ip6ipfixbase-func.robot b/tests/vpp/func/telemetry/eth2p-ethip6-ip6base-ip6ipfixbase-func.robot deleted file mode 100644 index ccf8526fe7..0000000000 --- a/tests/vpp/func/telemetry/eth2p-ethip6-ip6base-ip6ipfixbase-func.robot +++ /dev/null @@ -1,202 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.Classify.Classify -| Library | resources.libraries.python.IPv6Util -| Library | resources.libraries.python.telemetry.IPFIXSetup -| Library | resources.libraries.python.Trace -| ... -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/telemetry/ipfix.robot -| ... -| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *IPFIX ipv6 test cases* -| ... -| ... | IPFIX tests use 3-node topology TG - DUT1 - DUT2 - TG with -| ... | one link between the nodes. DUT1 is configured with IPv4 and IPV6 -| ... | routing and static routes. IPFIX is configured on DUT1 with -| ... | DUT1->TG interface as collector.Test packets are -| ... | sent from TG to or through DUT1. TG listens for flow report packets -| ... | and verifies that they contains flow records of test packets sent. - -*** Variables *** -| ${dut1_to_tg_ip}= | 10::10 -| ${dut2_to_dut1_ip}= | 11::10 -| ${tg_to_dut1_ip}= | 12::10 -| ${prefix_length}= | 64 -| ${ip_version}= | ip6 -| ${port}= | 80 - -# IPv4 addresses used for IPFIX exporter. Export over IPv6 not (yet?) supported. -| ${dut1_to_tg_ip4}= | 192.168.1.1 -| ${tg_to_dut1_ip4}= | 192.168.1.2 - -*** Test Cases *** -| TC01: DUT reports packet flow for traffic by source address -| | [Tags] | EXPECTED_FAILING -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface -| | ... | address as collector and add classify session with TG source address. -| | ... | [Ver] Make TG send a packet to DUT1, then listen for IPFIX template -| | ... | and data packets, verify that IPFIX reported the received packet. -| | ... | [Ref] RFC 7011 -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24} -| | And VPP Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4} -| | ... | ${tg_to_dut1_mac} -| | And VPP Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip} -| | ... | ${tg_to_dut1_mac} -| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg} -| | ${table_index} | ${skip_n} | ${match_n}= -| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | src -| | And VPP configures classify session L3 | ${dut1_node} | permit -| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | src -| | ... | ${tg_to_dut1_ip} -| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg} -| | ... | ${table_index} | ip_version=${ip_version} -| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4} -| | ... | ${dut1_to_tg_ip4} | interval=5 -| | And Set IPFIX stream | ${dut1_node} | ${1} -| | And Assign classify table to exporter | ${dut1_node} | ${table_index} -| | ... | ${ip_version} -| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node} -| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip} - -| TC02: DUT reports packet flow for traffic with local destination address -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface -| | ... | address as collector and add classify session with destination -| | ... | address of DUT1. -| | ... | [Ver] Make TG send a packet to DUT1, then listen for IPFIX template -| | ... | and data packets, verify that IPFIX reported the received packet. -| | ... | [Ref] RFC 7011 -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24} -| | And VPP Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4} -| | ... | ${tg_to_dut1_mac} -| | And VPP Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip} -| | ... | ${tg_to_dut1_mac} -| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg} -| | ${table_index} | ${skip_n} | ${match_n}= -| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | dst -| | And VPP configures classify session L3 | ${dut1_node} | permit -| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | dst -| | ... | ${dut1_to_tg_ip} -| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg} -| | ... | ${table_index} | ip_version=${ip_version} -| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4} -| | ... | ${dut1_to_tg_ip4} | interval=5 -| | And Set IPFIX stream | ${dut1_node} | ${1} -| | And Assign classify table to exporter | ${dut1_node} | ${table_index} -| | ... | ${ip_version} -| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node} -| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip} - -| TC03: DUT reports packet flow for traffic with remote destination address -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface -| | ... | address as collector and add classify session with destination -| | ... | address of DUT2. -| | ... | [Ver] Make TG send a packet to DUT2 through DUT1, then listen -| | ... | for IPFIX template and data packets, verify that IPFIX reported -| | ... | the received packet. -| | ... | [Ref] RFC 7011 -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24} -| | And VPP Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4} -| | ... | ${tg_to_dut1_mac} -| | And VPP Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip} -| | ... | ${tg_to_dut1_mac} -| | And VPP Add IP Neighbor | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${dut2_to_dut1_ip} | ${dut2_to_dut1_mac} -| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg} -| | ${table_index} | ${skip_n} | ${match_n}= -| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | dst -| | And VPP configures classify session L3 | ${dut1_node} | permit -| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | dst -| | ... | ${dut2_to_dut1_ip} -| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg} -| | ... | ${table_index} | ip_version=${ip_version} -| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4} -| | ... | ${dut1_to_tg_ip4} | interval=5 -| | And Set IPFIX stream | ${dut1_node} | ${1} -| | And Assign classify table to exporter | ${dut1_node} | ${table_index} -| | ... | ${ip_version} -| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node} -| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} -| | ... | ${dut2_to_dut1_ip} - -| TC04: DUT reports packet flow for traffic by source and destination port -| | [Tags] | SKIP_VPP_PATCH -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface -| | ... | address as collector and add classify session with TG source address -| | ... | and source and destination ports. -| | ... | [Ver] Make TG send a packet to DUT1, then listen for IPFIX template -| | ... | and data packets, verify that IPFIX reported the received packet. -| | ... | [Ref] RFC 7011 -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24} -| | And VPP Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4} -| | ... | ${tg_to_dut1_mac} -| | And VPP Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip} -| | ... | ${tg_to_dut1_mac} -| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg} -| | ${table_index} | ${skip_n} | ${match_n}= -| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} -| | ... | src proto l4 src_port dst_port -| | And VPP configures classify session generic | ${dut1_node} -| | ... | acl-hit-next permit | ${table_index} | ${skip_n} | ${match_n} -| | ... | l3 ${ip_version} src ${tg_to_dut1_ip} -| | ... | proto 6 l4 src_port ${port} dst_port ${port} -| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg} -| | ... | ${table_index} | ip_version=${ip_version} -| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4} -| | ... | ${dut1_to_tg_ip4} | interval=5 -| | And Set IPFIX stream | ${dut1_node} | ${1} -| | And Assign classify table to exporter | ${dut1_node} | ${table_index} -| | ... | ${ip_version} -| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node} -| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip} -| | ... | port=${port} - -# TODO: DUT reports packet flow when ACL is configured with wildcards diff --git a/tests/vpp/func/telemetry/eth2p-ethip6-ip6base-ip6ipfixscale-func.robot b/tests/vpp/func/telemetry/eth2p-ethip6-ip6base-ip6ipfixscale-func.robot deleted file mode 100644 index d8b0444549..0000000000 --- a/tests/vpp/func/telemetry/eth2p-ethip6-ip6base-ip6ipfixscale-func.robot +++ /dev/null @@ -1,129 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.Classify.Classify -| Library | resources.libraries.python.telemetry.IPFIXSetup -| Library | resources.libraries.python.Trace -| ... -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/telemetry/ipfix.robot -| ... -| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | SKIP_VPP_PATCH -| ... | EXPECTED_FAILING -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *IPFIX ipv6 test cases* -| ... -| ... | IPFIX tests use 3-node topology TG - DUT1 - DUT2 - TG with -| ... | one link between the nodes. DUT1 is configured with IPv4 and IPV6 -| ... | routing and static routes. IPFIX is configured on DUT1 with -| ... | DUT1->TG interface as collector.Test packets are -| ... | sent from TG to or through DUT1. TG listens for flow report packets -| ... | and verifies that they contains flow records of test packets sent. - -*** Variables *** -| ${dut1_to_tg_ip}= | 10::10 -| ${tg_to_dut1_ip}= | 12::10 -| ${prefix_length}= | 64 -| ${ip_version}= | ip6 -| ${sessions}= | 45 - -# IPv4 addresses used for IPFIX exporter. Export over IPv6 not (yet?) supported. -| ${dut1_to_tg_ip4}= | 192.168.1.1 -| ${tg_to_dut1_ip4}= | 192.168.1.2 - -*** Test Cases *** -| TC01: DUT reports packet flow with a large number of packets -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface -| | ... | address as collector and add classify session with TG source address. -| | ... | [Ver] Make TG send packets to DUT1, then listen for IPFIX template -| | ... | and data packets, verify that IPFIX reported the received packets. -| | ... | [Ref] RFC 7011 -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24} -| | And VPP Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4} -| | ... | ${tg_to_dut1_mac} -| | And VPP Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip} -| | ... | ${tg_to_dut1_mac} -| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg} -| | ${table_index} | ${skip_n} | ${match_n}= -| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | src -| | And VPP configures classify session L3 | ${dut1_node} | permit -| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | src -| | ... | ${tg_to_dut1_ip} -| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg} -| | ... | ${table_index} | ip_version=${ip_version} -| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4} -| | ... | ${dut1_to_tg_ip4} | interval=5 -| | And Set IPFIX stream | ${dut1_node} | ${1} -| | And Assign classify table to exporter | ${dut1_node} | ${table_index} -| | ... | ${ip_version} -| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node} -| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip} -| | ... | count=20000 | timeout=10 - -| TC02: DUT reports packet flow when multiple sessions are configured -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface -| | ... | address as collector and add several classify sessions with different -| | ... | ports. -| | ... | [Ver] Make TG send packets to DUT1 using a range of ports matching -| | ... | configured sessions, then listen for IPFIX template and data packets, -| | ... | verify that IPFIX reported the received packets for each session. -| | ... | [Ref] RFC 7011 -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} -| | And VPP Interface Set IP Address | ${dut1_node} -| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24} -| | And VPP Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4} -| | ... | ${tg_to_dut1_mac} -| | And VPP Add IP Neighbor | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip} -| | ... | ${tg_to_dut1_mac} -| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg} -| | ${table_index} | ${skip_n} | ${match_n}= -| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} -| | ... | src proto l4 src_port dst_port -| | :FOR | ${index} | IN RANGE | ${sessions} -| | | VPP configures classify session generic | ${dut1_node} -| | | ... | acl-hit-next permit | ${table_index} | ${skip_n} | ${match_n} -| | | ... | l3 ${ip_version} src ${tg_to_dut1_ip} -| | | ... | proto 6 l4 src_port ${index} dst_port ${index} -| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg} -| | ... | ${table_index} | ip_version=${ip_version} -| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4} -| | ... | ${dut1_to_tg_ip4} | interval=5 -| | ... | mtu=1450 | interval=5 -| | And Set IPFIX stream | ${dut1_node} | ${1} -| | And Assign classify table to exporter | ${dut1_node} | ${table_index} -| | ... | ${ip_version} -| | Then Send session sweep and verify IPFIX | ${tg_node} | ${dut1_node} -| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip} -| | ... | ${sessions} | timeout=10 | count=3 - -# TODO: DUT reports packet flow when ACL is configured with wildcards diff --git a/tests/vpp/func/telemetry/eth2p-ethip6-ip6base-spanrx-func.robot b/tests/vpp/func/telemetry/eth2p-ethip6-ip6base-spanrx-func.robot deleted file mode 100644 index 4e7b452338..0000000000 --- a/tests/vpp/func/telemetry/eth2p-ethip6-ip6base-spanrx-func.robot +++ /dev/null @@ -1,68 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.IPv6Util -| Library | resources.libraries.python.telemetry.SPAN -| Library | resources.libraries.python.Trace -| ... -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/telemetry/span.robot -| ... -| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO -| ... -| Test Setup | Set up functional test -| ... -| Test Teardown | Tear down functional test -| ... -| Documentation | *SPAN test suite* -| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two -| ... | links between nodes. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with SPAN mirroring from -| ... | the first DUT1-TG interface to the second one. -| ... | *[Ver] TG verification:* Test ARP or ICMP packets are sent by TG -| ... | on first link to DUT1; On receipt through second link TG verifies -| ... | the copy of packet sent and the copy of DUT's reply packet. -| ... | *[Ref] Applicable standard specifications: None?* - -*** Variables *** -| ${tg_to_dut_if1_ip6}= | 11::1 -| ${dut_to_tg_if1_ip6}= | 10::1 -| ${prefix}= | 24 - -*** Test Cases *** -| TC01: DUT mirrors IPv6 packets from one interface to another -| | [Documentation] -| | ... | [Top] TG=DUT1 -| | ... | [Cfg] On DUT1 configure IPv6 address, add ARP entry for one TG \ -| | ... | interface and set SPAN mirroring from one DUT interface to the other. -| | ... | [Ver] Make TG send an ICMP packet to DUT through one interface,\ -| | ... | then receive a copy of sent packet and of DUT's ICMP reply\ -| | ... | on the other interface. -| | Given Configure path in 2-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | And Set interfaces in 2-node circular topology up -| | And VPP Interface Set IP Address -| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip6} | ${prefix} -| | And VPP Add IP Neighbor | ${dut_node} -| | ... | ${dut_to_tg_if1} | ${tg_to_dut_if1_ip6} | ${tg_to_dut_if1_mac} -| | And Vpp Route Add | ${dut_node} | ${tg_to_dut_if1_ip6} | ${prefix} -| | ... | gateway=${dut_to_tg_if1_ip6} | interface=${dut_to_tg_if1} -| | And Vpp Ra Suppress Link Layer | ${dut_node} | ${dut_to_tg_if1} -| | And Set SPAN Mirroring | ${dut_node} | ${dut_to_tg_if1} | ${dut_to_tg_if2} -| | Then Send Packet And Check Received Copies -| | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} -| | ... | ${dut_to_tg__if1_mac} | ${tg_to_dut_if2} -| | ... | ${tg_to_dut_if1_ip6} | ${dut_to_tg_if1_ip6} | ICMPv6 |