aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot
diff options
context:
space:
mode:
Diffstat (limited to 'tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot')
-rw-r--r--tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot157
1 files changed, 157 insertions, 0 deletions
diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot
new file mode 100644
index 0000000000..760e8458e1
--- /dev/null
+++ b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot
@@ -0,0 +1,157 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | BASE | MEMIF | LXC
+| ...
+| Suite Setup | Run Keywords
+| ... | Set up 3-node performance topology with DUT's NIC model | L2
+| ... | Intel-X520-DA2
+| ... | AND | Set up performance test suite with MEMIF
+| ... | AND | Set up performance topology with containers
+| ...
+| Suite Teardown | Tear down 3-node performance topology with container
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *Raw results L2BD test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2
+| ... | bridge domains and MAC learning enabled. LXC is connected to VPP via
+| ... | Memif interface. LXC is running same VPP version as running on DUT. LXC
+| ... | is limited via cgroup to use 3 cores allocated from pool of isolated
+| ... | CPUs. There are no memory constraints. DUT1 and DUT2 tested with
+| ... | 2p10GE NIC X520 Niantic by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
+| ... | at line rate and reports total received/sent packets over trial period.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+# X520-DA2 bandwidth limit
+| ${s_limit} | ${10000000000}
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+# LXC container
+| ${container_count}= | ${1}
+| ${container_engine}= | LXC
+| ${container_image}= | ${EMPTY}
+# CPU settings
+| ${system_cpus}= | ${1}
+| ${vpp_cpus}= | ${5}
+| ${container_cpus}= | ${3}
+
+*** Keywords ***
+| Check RR for l2bdbasemaclrn-eth-2memif-1lxc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with ${wt} thread(s), ${wt}\
+| | ... | phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${framesize} | ${wt} | ${rxq}
+| | ...
+| | # Test Variables required for test teardown
+| | Set Test Variable | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Initialize L2 Bridge Domain for '1' memif pairs in 3-node circular topology
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-64B-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD
+| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc
+| | framesize=${64} | wt=1 | rxq=1
+
+| tc02-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD
+| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc
+| | framesize=IMIX_v4_1 | wt=1 | rxq=1
+
+| tc03-1518B-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc
+| | framesize=${1518} | wt=1 | rxq=1
+
+| tc04-64B-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD
+| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc
+| | framesize=${64} | wt=2 | rxq=1
+
+| tc05-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate forIMIX_v4_1 frames using single trial\
+| | ... | throughput test.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD
+| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc
+| | framesize=IMIX_v4_1 | wt=2 | rxq=1
+
+| tc06-1518B-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
+| | ... | throughput test.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc
+| | framesize=${1518} | wt=2 | rxq=1 \ No newline at end of file