diff options
Diffstat (limited to 'tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-ndrpdrdisc.robot')
| -rw-r--r-- | tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-ndrpdrdisc.robot | 168 |
1 files changed, 0 insertions, 168 deletions
diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-ndrpdrdisc.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-ndrpdrdisc.robot deleted file mode 100644 index 021c61ba22..0000000000 --- a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-ndrpdrdisc.robot +++ /dev/null @@ -1,168 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | BASE | MEMIF | LXC -| ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | Intel-X520-DA2 -| ... | AND | Set up performance test suite with MEMIF -| ... | AND | Set up performance topology with containers -| ... -| Suite Teardown | Tear down 3-node performance topology with container -| ... -| Test Setup | Run Keywords -| ... | Set up performance test -| ... | AND | Restart VPP in all 'VNF' containers -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local template -| ... -| Documentation | *RFC2544: Pkt throughput L2XC test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. -| ... | LXC is connected to VPP via Memif interface. LXC is running same VPP -| ... | version as running on DUT. LXC is limited via cgroup to use 3 cores -| ... | allocated from pool of isolated CPUs. There are no memory contraints. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -| ${avg_imix_framesize}= | ${357.833} -# X520-DA2 bandwidth limit -| ${s_limit} | ${10000000000} -# Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 -# LXC container -| ${container_count}= | ${1} -| ${container_engine}= | LXC -| ${container_image}= | ${EMPTY} -| ${container_install_dkms}= | ${FALSE} -| ${container_chain_topology}= | chain -# CPU settings -| ${system_cpus}= | ${1} -| ${vpp_cpus}= | ${5} -| ${container_cpus}= | ${5} - -*** Keywords *** -| L2 Cross Connect over Memif Binary Search -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Find ${search_type} for ${framesize}B frames using binary search\ -| | ... | start at linerate, step ${min_rate}pps. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - search_type - NDR or PDR. Type: string -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... | - min_rate - Min rate for binary search, default value: ${50000}. -| | ... | Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${search_type} -| | ... | ${rxq}=${None} | ${min_rate}=${50000} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} -| | ${get_framesize}= | Set Variable If -| | ... | "${framesize}" == "IMIX_v4_1" | ${avg_imix_framesize} | ${framesize} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | Add PCI devices to all DUTs -| | Run Keyword If | ${get_framesize} < ${1522} | Add No Multi Seg to all DUTs -| | Apply startup configuration on all VPP DUTs -| | Initialize L2 xconnect for '1' memif pairs in 3-node circular topology -| | Run Keyword If | '${search_type}' == 'NDR' -| | ... | Find NDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ELSE IF | '${search_type}' == 'PDR' -| | ... | Find PDR using binary search and pps -| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} -| | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} - -*** Test Cases *** -| tc01-64B-1t1c-eth-l2xcbase-eth-2memif-1lxc-ndrdisc -| | [Tags] | 64B | 1C | NDRDISC -| | framesize=${64} | phy_cores=${1} | search_type=NDR - -| tc02-64B-1t1c-eth-l2xcbase-eth-2memif-1lxc-pdrdisc -| | [Tags] | 64B | 1C | PDRDISC -| | framesize=${64} | phy_cores=${1} | search_type=PDR - -| tc03-IMIX-1t1c-eth-l2xcbase-eth-2memif-1lxc-ndrdisc -| | [Tags] | IMIX | 1C | NDRDISC -| | framesize=IMIX_v4_1 | phy_cores=${1} | search_type=NDR - -| tc04-IMIX-1t1c-eth-l2xcbase-eth-2memif-1lxc-pdrdisc -| | [Tags] | IMIX | 1C | PDRDISC -| | framesize=IMIX_v4_1 | phy_cores=${1} | search_type=PDR - -| tc05-1518B-1t1c-eth-l2xcbase-eth-2memif-1lxc-ndrdisc -| | [Tags] | 1518B | 1C | NDRDISC -| | framesize=${1518} | phy_cores=${1} | search_type=NDR - -| tc06-1518B-1t1c-eth-l2xcbase-eth-2memif-1lxc-pdrdisc -| | [Tags] | 1518B | 1C | PDRDISC -| | framesize=${1518} | phy_cores=${1} | search_type=PDR - -| tc07-64B-2t2c-eth-l2xcbase-eth-2memif-1lxc-ndrdisc -| | [Tags] | 64B | 2C | NDRDISC -| | framesize=${64} | phy_cores=${2} | search_type=NDR - -| tc08-64B-2t2c-eth-l2xcbase-eth-2memif-1lxc-pdrdisc -| | [Tags] | 64B | 2C | PDRDISC -| | framesize=${64} | phy_cores=${2} | search_type=PDR - -| tc09-IMIX-2t2c-eth-l2xcbase-eth-2memif-1lxc-ndrdisc -| | [Tags] | IMIX | 2C | NDRDISC -| | framesize=IMIX_v4_1 | phy_cores=${2} | search_type=NDR - -| tc10-IMIX-2t2c-eth-l2xcbase-eth-2memif-1lxc-pdrdisc -| | [Tags] | IMIX | 2C | PDRDISC -| | framesize=IMIX_v4_1 | phy_cores=${2} | search_type=PDR - -| tc11-1518B-2t2c-eth-l2xcbase-eth-2memif-1lxc-ndrdisc -| | [Tags] | 1518B | 2C | NDRDISC -| | framesize=${1518} | phy_cores=${2} | search_type=NDR - -| tc12-1518B-2t2c-eth-l2xcbase-eth-2memif-1lxc-pdrdisc -| | [Tags] | 1518B | 2C | PDRDISC -| | framesize=${1518} | phy_cores=${2} | search_type=PDR |