aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
diff options
context:
space:
mode:
Diffstat (limited to 'tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot')
-rw-r--r--tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot169
1 files changed, 0 insertions, 169 deletions
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
deleted file mode 100644
index 8fc2c22ef1..0000000000
--- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot
+++ /dev/null
@@ -1,169 +0,0 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/crypto/ipsec.robot
-|
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_1000
-| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE
-| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI
-| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha
-|
-| Suite Setup | Setup suite topology interfaces | performance
-| Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test | performance
-| Test Teardown | Tear down test | performance | ipsec_sa
-|
-| Test Template | Local Template
-|
-| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,
-| ... | Eth-IPv4-IPSec on DUT1-DUT2
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\
-| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\
-| ... | and send to another DUT, where packets are decrypted and sent back to TG
-| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\
-| ... | with zero packet loss tolerance, then measures loss at this load\
-| ... | while additional chain is configured.\
-| ... | Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, number of flows per flow-group equals to
-| ... | number of IPSec tunnels) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and
-| ... | static payload. MAC addresses are matching MAC addresses of the TG
-| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field
-| ... | is applied to both streams.
-| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
-| ... | crypto_native_plugin.so
-| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | Intel-X710
-| ${nic_driver}= | vfio-pci
-| ${nic_rxq_size}= | 0
-| ${nic_txq_size}= | 0
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 0
-| ${osi_layer}= | L3
-| ${overhead}= | ${78}
-| ${tg_if1_ip4}= | 192.168.10.2
-| ${dut1_if1_ip4}= | 192.168.10.1
-| ${dut1_if2_ip4}= | 100.0.0.1
-| ${dut2_if1_ip4}= | 200.0.0.2
-| ${dut2_if2_ip4}= | 192.168.20.1
-| ${tg_if2_ip4}= | 192.168.20.2
-| ${raddr_ip4}= | 20.0.0.0
-| ${laddr_ip4}= | 10.0.0.0
-| ${addr_range}= | ${24}
-| ${n_tunnels}= | ${1000}
-| ${n_added_tunnels}= | ${1}
-# Traffic profile:
-| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config.\
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure packet loss during reconfig at NDR load.\
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | # These are enums (not strings) so they cannot be in Variables table.
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA 512 256
-| |
-| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels}
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Initialize IPSec in 3-node circular topology
-| | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
-| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg}
-| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range}
-| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch
-| | Start Traffic on Background | ${unidirectional_throughput}
-| | And VPP IPsec Create Tunnel Interfaces
-| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0]
-| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg}
-| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels}
-| | ${result}= | Stop Running Traffic
-| | Display Reconfig Test Message | ${result}
-
-*** Test Cases ***
-| 64B-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| 64B-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| 64B-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| 1518B-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| 1518B-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| 1518B-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| 9000B-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| 9000B-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| 9000B-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| IMIX-1c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| IMIX-2c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| IMIX-4c-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}