diff options
Diffstat (limited to 'tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot')
| -rw-r--r-- | tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot | 169 |
1 files changed, 0 insertions, 169 deletions
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot deleted file mode 100644 index fb16f2ae07..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot +++ /dev/null @@ -1,169 +0,0 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | RECONF | TNL_20000 -| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE -| ... | AES_128_CBC | HMAC_SHA_256 | HMAC | AES | 1_ADDED_TUNNEL | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha -| -| Suite Setup | Setup suite topology interfaces | performance -| Suite Teardown | Tear down suite | performance -| Test Setup | Setup test | performance -| Test Teardown | Tear down test | performance | ipsec_sa -| -| Test Template | Local Template -| -| Documentation | *RFC2544: Packet loss IPv4 IPsec tunnel mode.* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple\ -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it\ -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds throughput NDR (Non Drop Rate)\ -| ... | with zero packet loss tolerance, then measures loss at this load\ -| ... | while additional chain is configured.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so -| ... | crypto_native_plugin.so -| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | Intel-X710 -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${osi_layer}= | L3 -| ${overhead}= | ${62} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 200.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${20000} -| ${n_added_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_256 config.\ -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure packet loss during reconfig at NDR load.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 256 128 -| | -| | ${n_total_tunnels} = | Evaluate | ${n_tunnels} + ${n_added_tunnels} -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch -| | Start Traffic on Background | ${unidirectional_throughput} -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] -| | ... | ${DUT2_${int}1}[0] | ${n_total_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_tunnels} -| | ${result}= | Stop Running Traffic -| | Display Reconfig Test Message | ${result} - -*** Test Cases *** -| 64B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| 64B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| 64B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| 1518B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| 1518B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| 1518B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| 9000B-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| 9000B-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| 9000B-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| IMIX-1c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| IMIX-2c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| IMIX-4c-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} |