diff options
Diffstat (limited to 'tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnl-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot')
-rw-r--r-- | tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnl-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot | 152 |
1 files changed, 0 insertions, 152 deletions
diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnl-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnl-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot deleted file mode 100644 index 95ca0c202c..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnl-ip4base-int-aes128cbc-hmac512sha-ndrpdr.robot +++ /dev/null @@ -1,152 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | BASE -| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES -| ... -| Suite Setup | Run Keywords -| ... | Set up IPSec performance test suite | L3 | ${nic_name} | HW_DH895xcc -| ... | AND | Set up performance test suite with crypto ipsecmb -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| Test Teardown | Tear down performance test -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -| ${nic_name}= | Intel-X710 -| ${overhead}= | ${58} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 100.0.0.1 -| ${dut2_if1_ip4}= | 100.0.0.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${24} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES_128_CBC / HMAC_SHA_512 config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | \${frame_size} -| | ... -| | # These are enums (not strings) so they cannot be in Variables table. -| | ${encr_alg}= | Crypto Alg AES CBC 128 -| | ${auth_alg}= | Integ Alg SHA 512 256 -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | Set Max Rate And Jumbo And Handle Multi Seg -| | And Add cryptodev to all DUTs | ${phy_cores} -| | And Apply startup configuration on all VPP DUTs -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} -| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg} -| | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecbasetnl-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecbasetnl-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 64B | 2C -| | frame_size=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecbasetnl-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 64B | 4C -| | frame_size=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecbasetnl-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 1518B | 1C -| | frame_size=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecbasetnl-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 1518B | 2C -| | frame_size=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecbasetnl-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 1518B | 4C -| | frame_size=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecbasetnl-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 9000B | 1C -| | frame_size=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecbasetnl-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 9000B | 2C -| | frame_size=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecbasetnl-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | 9000B | 4C -| | frame_size=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecbasetnl-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | IMIX | 1C -| | frame_size=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecbasetnl-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | IMIX | 2C -| | frame_size=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecbasetnl-ip4base-int-aes128cbc-hmac512sha-ndrpdr -| | [Tags] | IMIX | 4C -| | frame_size=IMIX_v4_1 | phy_cores=${4} |