diff options
Diffstat (limited to 'tests/vpp/perf/crypto')
| -rw-r--r-- | tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr.robot | 152 |
1 files changed, 152 insertions, 0 deletions
diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr.robot new file mode 100644 index 0000000000..864d24f7fb --- /dev/null +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr.robot @@ -0,0 +1,152 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| Resource | resources/libraries/robot/crypto/ipsec.robot +| Resource | resources/libraries/robot/overlay/lispgpe.robot +| ... +| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR | IP4FWD +| ... | LISPGPE | IPSEC | IPSECHW | IPSECTRAN | ENCAP | IP4UNRLAY | IP4OVRLAY +| ... | NIC_Intel-XL710 +| ... +| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710 +| ... | HW_cryptodev +| ... +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Setup | Set up performance test +| ... +| Test Teardown | Tear down performance mrr test +| ... +| Test Template | Local Template +| ... +| Documentation | *IPv4 IPsec transport mode performance test suite.* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,\ +| ... | Eth-IPv4-IPSec-LISPGPE-IPv4 on DUT1-DUT2 +| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec\ +| ... | in each direction. IPsec is in transport mode. DUTs get IPv4 traffic\ +| ... | from TG, encrypt it and send to another DUT, where packets are\ +| ... | decrypted and sent back to TG. +| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic +| ... | at line rate and reports total received/sent packets over trial period. +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, number of flows per flow-group equals to\ +| ... | number of IPSec tunnels) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and\ +| ... | static payload. MAC addresses are matching MAC addresses of the TG\ +| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address)\ +| ... | field is applied to both streams. +| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303 and\ +| ... | RFC2544. + +*** Variables *** +# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps +| ${s_24.5G}= | ${24500000000} +# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps +| ${s_18.75Mpps}= | ${18750000} +| ${dut2_spi}= | ${1000} +| ${dut1_spi}= | ${1001} +| ${ESP_PROTO}= | ${50} +| ${overhead}= | ${54} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\ +| | ... | IPsec is in transport mode. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | ... +| | ${encr_alg} = | Crypto Alg AES CBC 128 +| | ${auth_alg} = | Integ Alg SHA1 96 +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead} +| | ... | pps_limit=${s_18.75Mpps} +| | And Add cryptodev to all DUTs | ${phy_cores} +| | And Add DPDK dev default RXD to all DUTs | 2048 +| | And Add DPDK dev default TXD to all DUTs | 2048 +| | And Apply startup configuration on all VPP DUTs +| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology +| | ... | ${encr_alg} | ${auth_alg} +| | Then Traffic should pass with maximum rate +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-64B-1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr +| | [Tags] | 64B | 1C +| | framesize=${64} | phy_cores=${1} + +| tc02-64B-2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} + +| tc03-64B-4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr +| | [Tags] | 1518B | 1C +| | framesize=${1518} | phy_cores=${1} + +| tc05-1518B-2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} + +| tc06-1518B-4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} + +| tc07-9000B-1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} + +| tc08-9000B-2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr +| | [Tags] | 9000B | 2C +| | framesize=${9000} | phy_cores=${2} + +| tc09-9000B-4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr +| | [Tags] | IMIX | 4C +| | framesize=IMIX_v4_1 | phy_cores=${4} |