diff options
Diffstat (limited to 'tests/vpp/perf/crypto')
51 files changed, 405 insertions, 6540 deletions
diff --git a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr.robot b/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr.robot deleted file mode 100644 index 7548df73a6..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr.robot +++ /dev/null @@ -1,160 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X553 | BASE -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-X553 -| ... | HW_C3xxx -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# X553 bandwidth limit 20Gbps/2=10Gbps -| ${s_10G}= | ${10000000000} -# X553 Mpps limit 29.76Mpps/2=14.88Mpps -| ${s_14.88Mpps}= | ${14880952} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${54} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES GCM config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | ${encr_alg} = | Crypto Alg AES GCM 128 -| | ${auth_alg} = | Integ Alg AES GCM 128 -| | ${ipsec_proto} = | IPsec Proto ESP -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_10G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_14.88Mpps} -| | And Add cryptodev to all DUTs | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Backend Dump | ${dut1} -| | And VPP IPsec Backend Dump | ${dut2} -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} -| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr.robot b/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr.robot deleted file mode 100644 index b6e40ad345..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr.robot +++ /dev/null @@ -1,155 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X553 | BASE -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-X553 -| ... | HW_C3xxx -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# X553 bandwidth limit 20Gbps/2=10Gbps -| ${s_10G}= | ${10000000000} -# X553 Mpps limit 29.76Mpps/2=14.88Mpps -| ${s_14.88Mpps}= | ${14880952} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${58} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling CBC-SHA1 config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | ${encr_alg} = | Crypto Alg AES CBC 128 -| | ${auth_alg} = | Integ Alg SHA1 96 -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_10G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_14.88Mpps} -| | And Add cryptodev to all DUTs | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} -| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr.robot b/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr.robot deleted file mode 100644 index 5c48610bbc..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr.robot +++ /dev/null @@ -1,166 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X553 | BASE -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-X553 -| ... | HW_C3xxx -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# X553 bandwidth limit 20Gbps/2=10Gbps -| ${s_10G}= | ${10000000000} -# X553 Mpps limit 29.76Mpps/2=14.88Mpps -| ${s_14.88Mpps}= | ${14880952} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${54} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | ${encr_alg} = | Crypto Alg AES GCM 128 -| | ${auth_alg} = | Integ Alg AES GCM 128 -| | ${ipsec_proto} = | IPsec Proto ESP -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_10G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_14.88Mpps} -| | And Add cryptodev to all DUTs | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Backend Dump | ${dut1} -| | And VPP IPsec Backend Dump | ${dut2} -| | And Initialize IPSec in 3-node circular topology -| | And Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | gateway=${dut2_if1_ip4} -| | ... | interface=${dut1_if2} -| | And Vpp Route Add | ${dut2} | ${laddr_ip4} | 8 | gateway=${dut1_if2_ip4} -| | ... | interface=${dut2_if1} -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${dut1} | ${dut2} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} -| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${laddr_ip4} | ${raddr_ip4} -| | ... | ${addr_range} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr.robot deleted file mode 100644 index 2628d62659..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr.robot +++ /dev/null @@ -1,171 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X553 | BASE -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-X553 -| ... | HW_C3xxx -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in number -| ... | of packets transmitted. NDR is discovered for different -| ... | number of IPsec tunnels using MLRsearch library. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# X553 bandwidth limit 20Gbps/2=10Gbps -| ${s_10G}= | ${10000000000} -# X553 Mpps limit 29.76Mpps/2=14.88Mpps -| ${s_14.88Mpps}= | ${14880952} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${54} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ${encr_alg} = | Crypto Alg AES GCM 128 -| | ${auth_alg} = | Integ Alg AES GCM 128 -| | ${ipsec_proto} = | IPsec Proto ESP -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_10G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_14.88Mpps} -| | And Add cryptodev to all DUTs | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Backend Dump | ${dut1} -| | And VPP IPsec Backend Dump | ${dut2} -| | And Initialize IPSec in 3-node circular topology -| | And Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | gateway=${dut2_if1_ip4} -| | ... | interface=${dut1_if2} -| | And Vpp Route Add | ${dut2} | ${laddr_ip4} | 8 | gateway=${dut1_if2_ip4} -| | ... | interface=${dut2_if1} -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${dut1} | ${dut2} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} -| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${laddr_ip4} | ${raddr_ip4} -| | ... | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr.robot b/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr.robot deleted file mode 100644 index 21e2609ac0..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr.robot +++ /dev/null @@ -1,160 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X553 | BASE -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-X553 -| ... | HW_C3xxx -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# X553 bandwidth limit 20Gbps/2=10Gbps -| ${s_10G}= | ${10000000000} -# X553 Mpps limit 29.76Mpps/2=14.88Mpps -| ${s_14.88Mpps}= | ${14880952} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${58} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | ${encr_alg} = | Crypto Alg AES CBC 128 -| | ${auth_alg} = | Integ Alg SHA1 96 -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_10G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_14.88Mpps} -| | And Add cryptodev to all DUTs | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And Initialize IPSec in 3-node circular topology -| | And Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | gateway=${dut2_if1_ip4} -| | ... | interface=${dut1_if2} -| | And Vpp Route Add | ${dut2} | ${laddr_ip4} | 8 | gateway=${dut1_if2_ip4} -| | ... | interface=${dut2_if1} -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${dut1} | ${dut2} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} -| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${laddr_ip4} | ${raddr_ip4} -| | ... | ${addr_range} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr.robot deleted file mode 100644 index b9eed98beb..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr.robot +++ /dev/null @@ -1,165 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X553 | BASE -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-X553 -| ... | HW_C3xxx -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in number -| ... | of packets transmitted. NDR is discovered for different -| ... | number of IPsec tunnels using MLRsearch library. -| ... | TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# X553 bandwidth limit 20Gbps/2=10Gbps -| ${s_10G}= | ${10000000000} -# X553 Mpps limit 29.76Mpps/2=14.88Mpps -| ${s_14.88Mpps}= | ${14880952} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${58} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ${encr_alg} = | Crypto Alg AES CBC 128 -| | ${auth_alg} = | Integ Alg SHA1 96 -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_10G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_14.88Mpps} -| | And Add cryptodev to all DUTs | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And Initialize IPSec in 3-node circular topology -| | And Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | gateway=${dut2_if1_ip4} -| | ... | interface=${dut1_if2} -| | And Vpp Route Add | ${dut2} | ${laddr_ip4} | 8 | gateway=${dut1_if2_ip4} -| | ... | interface=${dut2_if1} -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${dut1} | ${dut2} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} -| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${laddr_ip4} | ${raddr_ip4} -| | ... | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr.robot b/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr.robot deleted file mode 100644 index d7ff1dac04..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr.robot +++ /dev/null @@ -1,162 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X553 | BASE -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-X553 -| ... | SW_cryptodev -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. -| ... | DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# X553 bandwidth limit 20Gbps/2=10Gbps -| ${s_10G}= | ${10000000000} -# X553 Mpps limit 29.76Mpps/2=14.88Mpps -| ${s_14.88Mpps}= | ${14880952} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${54} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES GCM config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | ${encr_alg} = | Crypto Alg AES GCM 128 -| | ${auth_alg} = | Integ Alg AES GCM 128 -| | ${ipsec_proto} = | IPsec Proto ESP -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_10G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_14.88Mpps} -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_gcm | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Backend Dump | ${dut1} -| | And VPP IPsec Backend Dump | ${dut2} -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} -| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr.robot b/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr.robot deleted file mode 100644 index c0a9059a1d..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr.robot +++ /dev/null @@ -1,157 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X553 | BASE -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-X553 -| ... | SW_cryptodev -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. -| ... | DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# X553 bandwidth limit 20Gbps/2=10Gbps -| ${s_10G}= | ${10000000000} -# X553 Mpps limit 29.76Mpps/2=14.88Mpps -| ${s_14.88Mpps}= | ${14880952} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${54} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling CBC-SHA1 config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | ${encr_alg} = | Crypto Alg AES CBC 128 -| | ${auth_alg} = | Integ Alg SHA1 96 -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_10G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_14.88Mpps} -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_mb | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} -| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr.robot b/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr.robot deleted file mode 100644 index e96b307537..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr.robot +++ /dev/null @@ -1,171 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X553 | BASE -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-X553 -| ... | SW_cryptodev -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. DUTs get IPv4 -| ... | traffic from TG, encrypt it and send to another DUT, where packets are -| ... | decrypted and sent back to TG. -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# X553 bandwidth limit 20Gbps/2=10Gbps -| ${s_10G}= | ${10000000000} -# X553 Mpps limit 29.76Mpps/2=14.88Mpps -| ${s_14.88Mpps}= | ${14880952} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${54} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES GCM config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - search_type - NDR or PDR. Type: string -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... | - min_rate - Min rate for binary search, default value: ${50000}. -| | ... | Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | ${encr_alg} = | Crypto Alg AES GCM 128 -| | ${auth_alg} = | Integ Alg AES GCM 128 -| | ${ipsec_proto} = | IPsec Proto ESP -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_10G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_14.88Mpps} -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_gcm | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Backend Dump | ${dut1} -| | And VPP IPsec Backend Dump | ${dut2} -| | And Initialize IPSec in 3-node circular topology -| | And Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | gateway=${dut2_if1_ip4} -| | ... | interface=${dut1_if2} -| | And Vpp Route Add | ${dut2} | ${laddr_ip4} | 8 | gateway=${dut1_if2_ip4} -| | ... | interface=${dut2_if1} -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${dut1} | ${dut2} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} -| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${laddr_ip4} | ${raddr_ip4} -| | ... | ${addr_range} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr.robot b/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr.robot deleted file mode 100644 index 1a9802e172..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr.robot +++ /dev/null @@ -1,166 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X553 | BASE -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-X553 -| ... | SW_cryptodev -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. DUTs get IPv4 -| ... | traffic from TG, encrypt it and send to another DUT, where packets are -| ... | decrypted and sent back to TG. -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# X553 bandwidth limit 20Gbps/2=10Gbps -| ${s_10G}= | ${10000000000} -# X553 Mpps limit 29.76Mpps/2=14.88Mpps -| ${s_14.88Mpps}= | ${14880952} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${54} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling CBC-SHA1 config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - search_type - NDR or PDR. Type: string -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... | - min_rate - Min rate for binary search, default value: ${50000}. -| | ... | Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | ${encr_alg} = | Crypto Alg AES CBC 128 -| | ${auth_alg} = | Integ Alg SHA1 96 -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_10G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_14.88Mpps} -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_mb | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And Initialize IPSec in 3-node circular topology -| | And Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | gateway=${dut2_if1_ip4} -| | ... | interface=${dut1_if2} -| | And Vpp Route Add | ${dut2} | ${laddr_ip4} | 8 | gateway=${dut1_if2_ip4} -| | ... | interface=${dut2_if1} -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${dut1} | ${dut2} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} -| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${laddr_ip4} | ${raddr_ip4} -| | ... | ${addr_range} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr.robot b/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr.robot deleted file mode 100644 index d4f7ec366c..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr.robot +++ /dev/null @@ -1,162 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | MRR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X553 | TNL_1000 -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-X553 -| ... | HW_C3xxx -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# X553 bandwidth limit 20Gbps/2=10Gbps -| ${s_10G}= | ${10000000000} -# X553 Mpps limit 29.76Mpps/2=14.88Mpps -| ${s_14.88Mpps}= | ${14880952} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${54} -| ${n_tunnels}= | ${1000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES GCM config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | ${encr_alg} = | Crypto Alg AES GCM 128 -| | ${auth_alg} = | Integ Alg AES GCM 128 -| | ${ipsec_proto} = | IPsec Proto ESP -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_10G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_14.88Mpps} -| | And Add cryptodev to all DUTs | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And VPP IPsec Backend Dump | ${dut1} -| | And VPP IPsec Backend Dump | ${dut2} -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Backend Dump | ${dut1} -| | And VPP IPsec Backend Dump | ${dut2} -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} -| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr.robot b/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr.robot deleted file mode 100644 index dd1bdafb9c..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr.robot +++ /dev/null @@ -1,155 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | MRR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X553 | TNL_1000 -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-X553 -| ... | HW_C3xxx -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# X553 bandwidth limit 20Gbps/2=10Gbps -| ${s_10G}= | ${10000000000} -# X553 Mpps limit 29.76Mpps/2=14.88Mpps -| ${s_14.88Mpps}= | ${14880952} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${58} -| ${n_tunnels}= | ${1000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling CBC-SHA1 config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | ${encr_alg} = | Crypto Alg AES CBC 128 -| | ${auth_alg} = | Integ Alg SHA1 96 -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_10G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_14.88Mpps} -| | And Add cryptodev to all DUTs | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} -| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr.robot b/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr.robot deleted file mode 100644 index 09cae0bba7..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr.robot +++ /dev/null @@ -1,168 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | MR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X553 | TNL_1000 -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-X553 -| ... | HW_C3xxx -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# X553 bandwidth limit 20Gbps/2=10Gbps -| ${s_10G}= | ${10000000000} -# X553 Mpps limit 29.76Mpps/2=14.88Mpps -| ${s_14.88Mpps}= | ${14880952} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${54} -| ${n_tunnels}= | ${1000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | ${encr_alg} = | Crypto Alg AES GCM 128 -| | ${auth_alg} = | Integ Alg AES GCM 128 -| | ${ipsec_proto} = | IPsec Proto ESP -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_10G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_14.88Mpps} -| | And Add cryptodev to all DUTs | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And VPP IPsec Backend Dump | ${dut1} -| | And VPP IPsec Backend Dump | ${dut2} -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Backend Dump | ${dut1} -| | And VPP IPsec Backend Dump | ${dut2} -| | And Initialize IPSec in 3-node circular topology -| | And Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | gateway=${dut2_if1_ip4} -| | ... | interface=${dut1_if2} -| | And Vpp Route Add | ${dut2} | ${laddr_ip4} | 8 | gateway=${dut1_if2_ip4} -| | ... | interface=${dut2_if1} -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${dut1} | ${dut2} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} -| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${laddr_ip4} | ${raddr_ip4} -| | ... | ${addr_range} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr.robot b/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr.robot deleted file mode 100644 index 072a74c801..0000000000 --- a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr.robot +++ /dev/null @@ -1,161 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | MRR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X553 | TNL_1000 -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-X553 -| ... | HW_C3xxx -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# X553 bandwidth limit 20Gbps/2=10Gbps -| ${s_10G}= | ${10000000000} -# X553 Mpps limit 29.76Mpps/2=14.88Mpps -| ${s_14.88Mpps}= | ${14880952} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${58} -| ${n_tunnels}= | ${1000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUTs run 1000 IPsec tunnels CBC-SHA1 in each direction. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | ${encr_alg} = | Crypto Alg AES CBC 128 -| | ${auth_alg} = | Integ Alg SHA1 96 -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_10G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_14.88Mpps} -| | And Add cryptodev to all DUTs | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And Initialize IPSec in 3-node circular topology -| | And Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | gateway=${dut2_if1_ip4} -| | ... | interface=${dut1_if2} -| | And Vpp Route Add | ${dut2} | ${laddr_ip4} | 8 | gateway=${dut1_if2_ip4} -| | ... | interface=${dut2_if1} -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${dut1} | ${dut2} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} -| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${laddr_ip4} | ${raddr_ip4} -| | ... | ${addr_range} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr.robot index 34fd80d2d6..c586652b1d 100644 --- a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr.robot @@ -16,16 +16,14 @@ | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X553 | BASE +| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | BASE | AES_GCM | ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-X553 -| ... | HW_C3xxx +| Suite Setup | Set up IPSec performance test suite | L3 | ${nic_name} +| ... | HW_DH895xcc | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} +| Test Teardown | Tear down performance test | ... | Test Template | Local Template | ... @@ -38,11 +36,11 @@ | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple | ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it | ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ | ... | Test packets are generated by TG on | ... | links to DUTs. TG traffic profile contains two L3 flow-groups | ... | (flow-group per direction, number of flows per flow-group equals to @@ -54,10 +52,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** -# X553 bandwidth limit 20Gbps/2=10Gbps -| ${s_10G}= | ${10000000000} -# X553 Mpps limit 29.76Mpps/2=14.88Mpps -| ${s_14.88Mpps}= | ${14880952} +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 | ${dut1_if2_ip4}= | 172.168.1.1 @@ -67,7 +63,6 @@ | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${32} -| ${overhead}= | ${54} | ${n_tunnels}= | ${1} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} @@ -80,24 +75,23 @@ | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ | | ... | | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). | | ... | Type: integer, string | | ... | - phy_cores - Number of physical cores. Type: integer | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} | | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ${encr_alg} = | Crypto Alg AES GCM 128 -| | ${auth_alg} = | Integ Alg AES GCM 128 -| | ${ipsec_proto} = | IPsec Proto ESP +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Integ Alg AES GCM 128 +| | ${ipsec_proto}= | IPsec Proto ESP | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_10G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_14.88Mpps} +| | Set Max Rate And Jumbo And Handle Multi Seg | | And Add cryptodev to all DUTs | ${phy_cores} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -113,53 +107,52 @@ | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} *** Test Cases *** | tc01-64B-1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr | | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} +| | frame_size=${64} | phy_cores=${1} | tc02-64B-2c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr | | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} +| | frame_size=${64} | phy_cores=${2} | tc03-64B-4c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr | | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} +| | frame_size=${64} | phy_cores=${4} | tc04-1518B-1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr | | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} +| | frame_size=${1518} | phy_cores=${1} | tc05-1518B-2c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr | | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} +| | frame_size=${1518} | phy_cores=${2} | tc06-1518B-4c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr | | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} +| | frame_size=${1518} | phy_cores=${4} | tc07-9000B-1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr | | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} +| | frame_size=${9000} | phy_cores=${1} | tc08-9000B-2c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr | | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} +| | frame_size=${9000} | phy_cores=${2} | tc09-9000B-4c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr | | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} +| | frame_size=${9000} | phy_cores=${4} | tc10-IMIX-1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr | | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} +| | frame_size=IMIX_v4_1 | phy_cores=${1} | tc11-IMIX-2c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr | | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} +| | frame_size=IMIX_v4_1 | phy_cores=${2} | tc12-IMIX-4c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr | | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr.robot index d6747e0e94..8b781ce175 100644 --- a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr.robot @@ -16,16 +16,14 @@ | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X553 | BASE +| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | BASE | CBC_SHA1 | ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-X553 -| ... | HW_C3xxx +| Suite Setup | Set up IPSec performance test suite | L3 | ${nic_name} +| ... | HW_DH895xcc | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} +| Test Teardown | Tear down performance test | ... | Test Template | Local Template | ... @@ -38,11 +36,11 @@ | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple | ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it | ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ | ... | Test packets are generated by TG on | ... | links to DUTs. TG traffic profile contains two L3 flow-groups | ... | (flow-group per direction, number of flows per flow-group equals to @@ -54,10 +52,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** -# X553 bandwidth limit 20Gbps/2=10Gbps -| ${s_10G}= | ${10000000000} -# X553 Mpps limit 29.76Mpps/2=14.88Mpps -| ${s_14.88Mpps}= | ${14880952} +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 | ${dut1_if2_ip4}= | 172.168.1.1 @@ -67,7 +63,6 @@ | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${32} -| ${overhead}= | ${58} | ${n_tunnels}= | ${1} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} @@ -80,23 +75,22 @@ | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ | | ... | | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). | | ... | Type: integer, string | | ... | - phy_cores - Number of physical cores. Type: integer | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} | | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ${encr_alg} = | Crypto Alg AES CBC 128 -| | ${auth_alg} = | Integ Alg SHA1 96 +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_10G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_14.88Mpps} +| | Set Max Rate And Jumbo And Handle Multi Seg | | And Add cryptodev to all DUTs | ${phy_cores} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -108,53 +102,52 @@ | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} *** Test Cases *** | tc01-64B-1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} +| | frame_size=${64} | phy_cores=${1} | tc02-64B-2c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} +| | frame_size=${64} | phy_cores=${2} | tc03-64B-4c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} +| | frame_size=${64} | phy_cores=${4} | tc04-1518B-1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} +| | frame_size=${1518} | phy_cores=${1} | tc05-1518B-2c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} +| | frame_size=${1518} | phy_cores=${2} | tc06-1518B-4c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} +| | frame_size=${1518} | phy_cores=${4} | tc07-9000B-1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} +| | frame_size=${9000} | phy_cores=${1} | tc08-9000B-2c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} +| | frame_size=${9000} | phy_cores=${2} | tc09-9000B-4c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} +| | frame_size=${9000} | phy_cores=${4} | tc10-IMIX-1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} +| | frame_size=IMIX_v4_1 | phy_cores=${1} | tc11-IMIX-2c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} +| | frame_size=IMIX_v4_1 | phy_cores=${2} | tc12-IMIX-4c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr.robot index 1cd17b4fc3..50c54725d8 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr.robot @@ -16,17 +16,14 @@ | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-XL710 | BASE +| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | BASE | AES_GCM | ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710 +| Suite Setup | Set up IPSec performance test suite | L3 | ${nic_name} | ... | HW_DH895xcc -| ... | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} +| Test Teardown | Tear down performance test | ... | Test Template | Local Template | ... @@ -39,11 +36,11 @@ | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple | ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it | ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in number -| ... | of packets transmitted. NDR is discovered for different -| ... | number of IPsec tunnels using MLRsearch library. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ | ... | Test packets are generated by TG on | ... | links to DUTs. TG traffic profile contains two L3 flow-groups | ... | (flow-group per direction, number of flows per flow-group equals to @@ -55,10 +52,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** -# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G}= | ${24500000000} -# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps}= | ${18750000} +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 | ${dut1_if2_ip4}= | 172.168.1.1 @@ -68,7 +63,6 @@ | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${32} -| ${overhead}= | ${54} | ${n_tunnels}= | ${1} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} @@ -81,24 +75,23 @@ | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ | | ... | | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). | | ... | Type: integer, string | | ... | - phy_cores - Number of physical cores. Type: integer | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} | | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ${encr_alg} = | Crypto Alg AES GCM 128 -| | ${auth_alg} = | Integ Alg AES GCM 128 -| | ${ipsec_proto} = | IPsec Proto ESP +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Integ Alg AES GCM 128 +| | ${ipsec_proto}= | IPsec Proto ESP | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_18.75Mpps} +| | Set Max Rate And Jumbo And Handle Multi Seg | | And Add cryptodev to all DUTs | ${phy_cores} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -119,53 +112,52 @@ | | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${laddr_ip4} | ${raddr_ip4} | | ... | ${addr_range} | | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} *** Test Cases *** | tc01-64B-1c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} +| | frame_size=${64} | phy_cores=${1} | tc02-64B-2c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} +| | frame_size=${64} | phy_cores=${2} | tc03-64B-4c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} +| | frame_size=${64} | phy_cores=${4} | tc04-1518B-1c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} +| | frame_size=${1518} | phy_cores=${1} | tc05-1518B-2c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} +| | frame_size=${1518} | phy_cores=${2} | tc06-1518B-4c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} +| | frame_size=${1518} | phy_cores=${4} | tc07-9000B-1c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} +| | frame_size=${9000} | phy_cores=${1} | tc08-9000B-2c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} +| | frame_size=${9000} | phy_cores=${2} | tc09-9000B-4c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} +| | frame_size=${9000} | phy_cores=${4} | tc10-IMIX-1c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} +| | frame_size=IMIX_v4_1 | phy_cores=${1} | tc11-IMIX-2c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} +| | frame_size=IMIX_v4_1 | phy_cores=${2} | tc12-IMIX-4c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr.robot index 4df6946999..89f993a4c9 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr.robot @@ -16,17 +16,14 @@ | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-XL710 | BASE +| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | BASE | CBC_SHA1 | ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710 +| Suite Setup | Set up IPSec performance test suite | L3 | ${nic_name} | ... | HW_DH895xcc -| ... | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} +| Test Teardown | Tear down performance test | ... | Test Template | Local Template | ... @@ -39,11 +36,11 @@ | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple | ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it | ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in number -| ... | of packets transmitted. NDR is discovered for different -| ... | number of IPsec tunnels using MLRsearch library. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ | ... | TG traffic profile contains two L3 flow-groups | ... | (flow-group per direction, number of flows per flow-group equals to | ... | number of IPSec tunnels) with all packets @@ -54,10 +51,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** -# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G}= | ${24500000000} -# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps}= | ${18750000} +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 | ${dut1_if2_ip4}= | 172.168.1.1 @@ -67,7 +62,6 @@ | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${32} -| ${overhead}= | ${58} | ${n_tunnels}= | ${1} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} @@ -80,23 +74,22 @@ | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ | | ... | | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). | | ... | Type: integer, string | | ... | - phy_cores - Number of physical cores. Type: integer | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} | | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ${encr_alg} = | Crypto Alg AES CBC 128 -| | ${auth_alg} = | Integ Alg SHA1 96 +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_18.75Mpps} +| | Set Max Rate And Jumbo And Handle Multi Seg | | And Add cryptodev to all DUTs | ${phy_cores} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -113,53 +106,52 @@ | | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${laddr_ip4} | ${raddr_ip4} | | ... | ${addr_range} | | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} *** Test Cases *** | tc01-64B-1c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} +| | frame_size=${64} | phy_cores=${1} | tc02-64B-2c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} +| | frame_size=${64} | phy_cores=${2} | tc03-64B-4c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} +| | frame_size=${64} | phy_cores=${4} | tc04-1518B-1c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} +| | frame_size=${1518} | phy_cores=${1} | tc05-1518B-2c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} +| | frame_size=${1518} | phy_cores=${2} | tc06-1518B-4c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} +| | frame_size=${1518} | phy_cores=${4} | tc07-9000B-1c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} +| | frame_size=${9000} | phy_cores=${1} | tc08-9000B-2c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} +| | frame_size=${9000} | phy_cores=${2} | tc09-9000B-4c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} +| | frame_size=${9000} | phy_cores=${4} | tc10-IMIX-1c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} +| | frame_size=IMIX_v4_1 | phy_cores=${1} | tc11-IMIX-2c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} +| | frame_size=IMIX_v4_1 | phy_cores=${2} | tc12-IMIX-4c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr.robot index 5e430f0443..6f0d2dbc32 100644 --- a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr.robot @@ -16,16 +16,14 @@ | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X553 | BASE +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE | AES_GCM | ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-X553 +| Suite Setup | Set up IPSec performance test suite | L3 | ${nic_name} | ... | SW_cryptodev | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} +| Test Teardown | Tear down performance test | ... | Test Template | Local Template | ... @@ -39,11 +37,11 @@ | ... | crypto devices and multiple IPsec tunnels between them. | ... | DUTs get IPv4 traffic from TG, encrypt it | ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ | ... | Test packets are generated by TG on | ... | links to DUTs. TG traffic profile contains two L3 flow-groups | ... | (flow-group per direction, number of flows per flow-group equals to @@ -55,10 +53,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** -# X553 bandwidth limit 20Gbps/2=10Gbps -| ${s_10G}= | ${10000000000} -# X553 Mpps limit 29.76Mpps/2=14.88Mpps -| ${s_14.88Mpps}= | ${14880952} +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 | ${dut1_if2_ip4}= | 172.168.1.1 @@ -68,7 +64,6 @@ | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${32} -| ${overhead}= | ${54} | ${n_tunnels}= | ${1} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} @@ -81,24 +76,23 @@ | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ | | ... | | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). | | ... | Type: integer, string | | ... | - phy_cores - Number of physical cores. Type: integer | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} | | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} +| | # These are enums (not strings) so they cannot be in Variables table. | | ${encr_alg} = | Crypto Alg AES GCM 128 | | ${auth_alg} = | Integ Alg AES GCM 128 | | ${ipsec_proto} = | IPsec Proto ESP | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_10G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_14.88Mpps} +| | Set Max Rate And Jumbo And Handle Multi Seg | | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology | | ... | aesni_gcm | ${phy_cores} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -115,53 +109,52 @@ | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} *** Test Cases *** | tc01-64B-1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr | | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} +| | frame_size=${64} | phy_cores=${1} | tc02-64B-2c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr | | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} +| | frame_size=${64} | phy_cores=${2} | tc03-64B-4c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr | | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} +| | frame_size=${64} | phy_cores=${4} | tc04-1518B-1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr | | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} +| | frame_size=${1518} | phy_cores=${1} | tc05-1518B-2c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr | | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} +| | frame_size=${1518} | phy_cores=${2} | tc06-1518B-4c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr | | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} +| | frame_size=${1518} | phy_cores=${4} | tc07-9000B-1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr | | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} +| | frame_size=${9000} | phy_cores=${1} | tc08-9000B-2c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr | | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} +| | frame_size=${9000} | phy_cores=${2} | tc09-9000B-4c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr | | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} +| | frame_size=${9000} | phy_cores=${4} | tc10-IMIX-1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr | | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} +| | frame_size=IMIX_v4_1 | phy_cores=${1} | tc11-IMIX-2c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr | | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} +| | frame_size=IMIX_v4_1 | phy_cores=${2} | tc12-IMIX-4c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr | | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr.robot index 85ec0a622a..5a78fedbee 100644 --- a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr.robot @@ -16,16 +16,14 @@ | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X553 | BASE +| ... | IP4FWD | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | BASE | CBC_SHA1 | ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-X553 +| Suite Setup | Set up IPSec performance test suite | L3 | ${nic_name} | ... | SW_cryptodev | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} +| Test Teardown | Tear down performance test | ... | Test Template | Local Template | ... @@ -39,11 +37,11 @@ | ... | crypto devices and multiple IPsec tunnels between them. | ... | DUTs get IPv4 traffic from TG, encrypt it | ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ | ... | Test packets are generated by TG on | ... | links to DUTs. TG traffic profile contains two L3 flow-groups | ... | (flow-group per direction, number of flows per flow-group equals to @@ -55,10 +53,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** -# X553 bandwidth limit 20Gbps/2=10Gbps -| ${s_10G}= | ${10000000000} -# X553 Mpps limit 29.76Mpps/2=14.88Mpps -| ${s_14.88Mpps}= | ${14880952} +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 | ${dut1_if2_ip4}= | 172.168.1.1 @@ -68,7 +64,6 @@ | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${32} -| ${overhead}= | ${54} | ${n_tunnels}= | ${1} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} @@ -81,23 +76,22 @@ | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ | | ... | | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). | | ... | Type: integer, string | | ... | - phy_cores - Number of physical cores. Type: integer | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} | | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ${encr_alg} = | Crypto Alg AES CBC 128 -| | ${auth_alg} = | Integ Alg SHA1 96 +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_10G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_14.88Mpps} +| | Set Max Rate And Jumbo And Handle Multi Seg | | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology | | ... | aesni_mb | ${phy_cores} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -110,53 +104,52 @@ | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} *** Test Cases *** | tc01-64B-1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} +| | frame_size=${64} | phy_cores=${1} | tc02-64B-2c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} +| | frame_size=${64} | phy_cores=${2} | tc03-64B-4c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} +| | frame_size=${64} | phy_cores=${4} | tc04-1518B-1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} +| | frame_size=${1518} | phy_cores=${1} | tc05-1518B-2c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} +| | frame_size=${1518} | phy_cores=${2} | tc06-1518B-4c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} +| | frame_size=${1518} | phy_cores=${4} | tc07-9000B-1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} +| | frame_size=${9000} | phy_cores=${1} | tc08-9000B-2c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} +| | frame_size=${9000} | phy_cores=${2} | tc09-9000B-4c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} +| | frame_size=${9000} | phy_cores=${4} | tc10-IMIX-1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} +| | frame_size=IMIX_v4_1 | phy_cores=${1} | tc11-IMIX-2c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} +| | frame_size=IMIX_v4_1 | phy_cores=${2} | tc12-IMIX-4c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr.robot index 28c68a7de9..7fbe75b1dc 100644 --- a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr.robot @@ -16,17 +16,14 @@ | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X553 | BASE +| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | BASE | AES_GCM | ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-X553 +| Suite Setup | Set up IPSec performance test suite | L3 | ${nic_name} | ... | SW_cryptodev -| ... | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} +| Test Teardown | Tear down performance test | ... | Test Template | Local Template | ... @@ -40,11 +37,11 @@ | ... | crypto devices and multiple IPsec tunnels between them. DUTs get IPv4 | ... | traffic from TG, encrypt it and send to another DUT, where packets are | ... | decrypted and sent back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ | ... | Test packets are generated by TG on | ... | links to DUTs. TG traffic profile contains two L3 flow-groups | ... | (flow-group per direction, number of flows per flow-group equals to @@ -56,10 +53,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** -# X553 bandwidth limit 20Gbps/2=10Gbps -| ${s_10G}= | ${10000000000} -# X553 Mpps limit 29.76Mpps/2=14.88Mpps -| ${s_14.88Mpps}= | ${14880952} +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 | ${dut1_if2_ip4}= | 172.168.1.1 @@ -69,7 +64,6 @@ | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${32} -| ${overhead}= | ${54} | ${n_tunnels}= | ${1} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} @@ -82,7 +76,7 @@ | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ | | ... | | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). | | ... | Type: integer, string | | ... | - phy_cores - Number of physical cores. Type: integer | | ... | - search_type - NDR or PDR. Type: string @@ -90,19 +84,18 @@ | | ... | - min_rate - Min rate for binary search, default value: ${50000}. | | ... | Type: integer | | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} | | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ${encr_alg} = | Crypto Alg AES GCM 128 -| | ${auth_alg} = | Integ Alg AES GCM 128 -| | ${ipsec_proto} = | IPsec Proto ESP +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Integ Alg AES GCM 128 +| | ${ipsec_proto}= | IPsec Proto ESP | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_10G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_14.88Mpps} +| | Set Max Rate And Jumbo And Handle Multi Seg | | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology | | ... | aesni_gcm | ${phy_cores} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -124,53 +117,52 @@ | | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${laddr_ip4} | ${raddr_ip4} | | ... | ${addr_range} | | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} *** Test Cases *** | tc01-64B-1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} +| | frame_size=${64} | phy_cores=${1} | tc02-64B-2c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} +| | frame_size=${64} | phy_cores=${2} | tc03-64B-4c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} +| | frame_size=${64} | phy_cores=${4} | tc04-1518B-1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} +| | frame_size=${1518} | phy_cores=${1} | tc05-1518B-2c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} +| | frame_size=${1518} | phy_cores=${2} | tc06-1518B-4c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} +| | frame_size=${1518} | phy_cores=${4} | tc07-9000B-1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} +| | frame_size=${9000} | phy_cores=${1} | tc08-9000B-2c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} +| | frame_size=${9000} | phy_cores=${2} | tc09-9000B-4c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} +| | frame_size=${9000} | phy_cores=${4} | tc10-IMIX-1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} +| | frame_size=IMIX_v4_1 | phy_cores=${1} | tc11-IMIX-2c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} +| | frame_size=IMIX_v4_1 | phy_cores=${2} | tc12-IMIX-4c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr.robot index 31fd30b50a..71d2ebc919 100644 --- a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr.robot @@ -16,17 +16,14 @@ | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X553 | BASE +| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-X710 | BASE | CBC_SHA1 | ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-X553 +| Suite Setup | Set up IPSec performance test suite | L3 | ${nic_name} | ... | SW_cryptodev -| ... | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} +| Test Teardown | Tear down performance test | ... | Test Template | Local Template | ... @@ -40,11 +37,11 @@ | ... | crypto devices and multiple IPsec tunnels between them. DUTs get IPv4 | ... | traffic from TG, encrypt it and send to another DUT, where packets are | ... | decrypted and sent back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ | ... | Test packets are generated by TG on | ... | links to DUTs. TG traffic profile contains two L3 flow-groups | ... | (flow-group per direction, number of flows per flow-group equals to @@ -56,10 +53,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** -# X553 bandwidth limit 20Gbps/2=10Gbps -| ${s_10G}= | ${10000000000} -# X553 Mpps limit 29.76Mpps/2=14.88Mpps -| ${s_14.88Mpps}= | ${14880952} +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 | ${dut1_if2_ip4}= | 172.168.1.1 @@ -69,7 +64,6 @@ | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${32} -| ${overhead}= | ${54} | ${n_tunnels}= | ${1} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} @@ -82,7 +76,7 @@ | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ | | ... | | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). | | ... | Type: integer, string | | ... | - phy_cores - Number of physical cores. Type: integer | | ... | - search_type - NDR or PDR. Type: string @@ -90,18 +84,17 @@ | | ... | - min_rate - Min rate for binary search, default value: ${50000}. | | ... | Type: integer | | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} | | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ${encr_alg} = | Crypto Alg AES CBC 128 -| | ${auth_alg} = | Integ Alg SHA1 96 +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_10G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_14.88Mpps} +| | Set Max Rate And Jumbo And Handle Multi Seg | | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology | | ... | aesni_mb | ${phy_cores} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -119,53 +112,52 @@ | | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${laddr_ip4} | ${raddr_ip4} | | ... | ${addr_range} | | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} *** Test Cases *** | tc01-64B-1c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} +| | frame_size=${64} | phy_cores=${1} | tc02-64B-2c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} +| | frame_size=${64} | phy_cores=${2} | tc03-64B-4c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} +| | frame_size=${64} | phy_cores=${4} | tc04-1518B-1c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} +| | frame_size=${1518} | phy_cores=${1} | tc05-1518B-2c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} +| | frame_size=${1518} | phy_cores=${2} | tc06-1518B-4c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} +| | frame_size=${1518} | phy_cores=${4} | tc07-9000B-1c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} +| | frame_size=${9000} | phy_cores=${1} | tc08-9000B-2c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} +| | frame_size=${9000} | phy_cores=${2} | tc09-9000B-4c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} +| | frame_size=${9000} | phy_cores=${4} | tc10-IMIX-1c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} +| | frame_size=IMIX_v4_1 | phy_cores=${1} | tc11-IMIX-2c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} +| | frame_size=IMIX_v4_1 | phy_cores=${2} | tc12-IMIX-4c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr.robot index c84588ea02..99f6c1030c 100644 --- a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr.robot @@ -16,16 +16,15 @@ | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X553 | TNL_1000 +| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | TNL_1000 +| ... | AES_GCM | ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-X553 -| ... | HW_C3xxx +| Suite Setup | Set up IPSec performance test suite | L3 | ${nic_name} +| ... | HW_DH895xcc | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} +| Test Teardown | Tear down performance test | ... | Test Template | Local Template | ... @@ -38,11 +37,11 @@ | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple | ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it | ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ | ... | Test packets are generated by TG on | ... | links to DUTs. TG traffic profile contains two L3 flow-groups | ... | (flow-group per direction, number of flows per flow-group equals to @@ -54,10 +53,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** -# X553 bandwidth limit 20Gbps/2=10Gbps -| ${s_10G}= | ${10000000000} -# X553 Mpps limit 29.76Mpps/2=14.88Mpps -| ${s_14.88Mpps}= | ${14880952} +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 | ${dut1_if2_ip4}= | 172.168.1.1 @@ -67,7 +64,6 @@ | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${32} -| ${overhead}= | ${54} | ${n_tunnels}= | ${1000} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} @@ -80,24 +76,23 @@ | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ | | ... | | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). | | ... | Type: integer, string | | ... | - phy_cores - Number of physical cores. Type: integer | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} | | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ${encr_alg} = | Crypto Alg AES GCM 128 -| | ${auth_alg} = | Integ Alg AES GCM 128 -| | ${ipsec_proto} = | IPsec Proto ESP +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Integ Alg AES GCM 128 +| | ${ipsec_proto}= | IPsec Proto ESP | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_10G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_14.88Mpps} +| | Set Max Rate And Jumbo And Handle Multi Seg | | And Add cryptodev to all DUTs | ${phy_cores} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -115,53 +110,52 @@ | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} *** Test Cases *** | tc01-64B-1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr | | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} +| | frame_size=${64} | phy_cores=${1} | tc02-64B-2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr | | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} +| | frame_size=${64} | phy_cores=${2} | tc03-64B-4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr | | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} +| | frame_size=${64} | phy_cores=${4} | tc04-1518B-1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr | | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} +| | frame_size=${1518} | phy_cores=${1} | tc05-1518B-2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr | | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} +| | frame_size=${1518} | phy_cores=${2} | tc06-1518B-4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr | | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} +| | frame_size=${1518} | phy_cores=${4} | tc07-9000B-1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr | | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} +| | frame_size=${9000} | phy_cores=${1} | tc08-9000B-2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr | | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} +| | frame_size=${9000} | phy_cores=${2} | tc09-9000B-4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr | | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} +| | frame_size=${9000} | phy_cores=${4} | tc10-IMIX-1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr | | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} +| | frame_size=IMIX_v4_1 | phy_cores=${1} | tc11-IMIX-2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr | | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} +| | frame_size=IMIX_v4_1 | phy_cores=${2} | tc12-IMIX-4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr | | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr.robot index cc3ab9366b..c12a1b17bc 100644 --- a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr.robot @@ -16,16 +16,15 @@ | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X553 | TNL_1000 +| ... | IP4FWD | IPSEC | IPSECHW | IPSECINT | NIC_Intel-X710 | TNL_1000 +| ... | CBC_SHA1 | ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-X553 -| ... | HW_C3xxx +| Suite Setup | Set up IPSec performance test suite | L3 | ${nic_name} +| ... | HW_DH895xcc | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} +| Test Teardown | Tear down performance test | ... | Test Template | Local Template | ... @@ -38,11 +37,11 @@ | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple | ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it | ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ | ... | Test packets are generated by TG on | ... | links to DUTs. TG traffic profile contains two L3 flow-groups | ... | (flow-group per direction, number of flows per flow-group equals to @@ -54,10 +53,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** -# X553 bandwidth limit 20Gbps/2=10Gbps -| ${s_10G}= | ${10000000000} -# X553 Mpps limit 29.76Mpps/2=14.88Mpps -| ${s_14.88Mpps}= | ${14880952} +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 | ${dut1_if2_ip4}= | 172.168.1.1 @@ -67,7 +64,6 @@ | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${32} -| ${overhead}= | ${58} | ${n_tunnels}= | ${1000} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} @@ -80,23 +76,22 @@ | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ | | ... | | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). | | ... | Type: integer, string | | ... | - phy_cores - Number of physical cores. Type: integer | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} | | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ${encr_alg} = | Crypto Alg AES CBC 128 -| | ${auth_alg} = | Integ Alg SHA1 96 +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_10G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_14.88Mpps} +| | Set Max Rate And Jumbo And Handle Multi Seg | | And Add cryptodev to all DUTs | ${phy_cores} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -108,53 +103,52 @@ | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg} | | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} *** Test Cases *** | tc01-64B-1c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} +| | frame_size=${64} | phy_cores=${1} | tc02-64B-2c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} +| | frame_size=${64} | phy_cores=${2} | tc03-64B-4c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} +| | frame_size=${64} | phy_cores=${4} | tc04-1518B-1c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} +| | frame_size=${1518} | phy_cores=${1} | tc05-1518B-2c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} +| | frame_size=${1518} | phy_cores=${2} | tc06-1518B-4c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} +| | frame_size=${1518} | phy_cores=${4} | tc07-9000B-1c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} +| | frame_size=${9000} | phy_cores=${1} | tc08-9000B-2c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} +| | frame_size=${9000} | phy_cores=${2} | tc09-9000B-4c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} +| | frame_size=${9000} | phy_cores=${4} | tc10-IMIX-1c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} +| | frame_size=IMIX_v4_1 | phy_cores=${1} | tc11-IMIX-2c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} +| | frame_size=IMIX_v4_1 | phy_cores=${2} | tc12-IMIX-4c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr | | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr.robot index c0c9f52f4d..0aaf6e304d 100644 --- a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr.robot @@ -16,17 +16,15 @@ | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X553 | TNL_1000 -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-X553 -| ... | HW_C3xxx +| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | TNL_1000 +| ... | AES_GCM | ... +| Suite Setup | Set up IPSec performance test suite | L3 | ${nic_name} +| ... | HW_DH895xcc | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} +| Test Teardown | Tear down performance test | ... | Test Template | Local Template | ... @@ -39,11 +37,11 @@ | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple | ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it | ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ | ... | Test packets are generated by TG on | ... | links to DUTs. TG traffic profile contains two L3 flow-groups | ... | (flow-group per direction, number of flows per flow-group equals to @@ -55,10 +53,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** -# X553 bandwidth limit 20Gbps/2=10Gbps -| ${s_10G}= | ${10000000000} -# X553 Mpps limit 29.76Mpps/2=14.88Mpps -| ${s_14.88Mpps}= | ${14880952} +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${54} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 | ${dut1_if2_ip4}= | 172.168.1.1 @@ -68,7 +64,6 @@ | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${32} -| ${overhead}= | ${54} | ${n_tunnels}= | ${1000} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} @@ -81,24 +76,23 @@ | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ | | ... | | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). | | ... | Type: integer, string | | ... | - phy_cores - Number of physical cores. Type: integer | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} | | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ${encr_alg} = | Crypto Alg AES GCM 128 -| | ${auth_alg} = | Integ Alg AES GCM 128 -| | ${ipsec_proto} = | IPsec Proto ESP +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES GCM 128 +| | ${auth_alg}= | Integ Alg AES GCM 128 +| | ${ipsec_proto}= | IPsec Proto ESP | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_10G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_14.88Mpps} +| | Set Max Rate And Jumbo And Handle Multi Seg | | And Add cryptodev to all DUTs | ${phy_cores} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -121,53 +115,52 @@ | | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${laddr_ip4} | ${raddr_ip4} | | ... | ${addr_range} | | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} *** Test Cases *** | tc01-64B-1c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} +| | frame_size=${64} | phy_cores=${1} | tc02-64B-2c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} +| | frame_size=${64} | phy_cores=${2} | tc03-64B-4c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} +| | frame_size=${64} | phy_cores=${4} | tc04-1518B-1c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} +| | frame_size=${1518} | phy_cores=${1} | tc05-1518B-2c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} +| | frame_size=${1518} | phy_cores=${2} | tc06-1518B-4c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} +| | frame_size=${1518} | phy_cores=${4} | tc07-9000B-1c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} +| | frame_size=${9000} | phy_cores=${1} | tc08-9000B-2c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} +| | frame_size=${9000} | phy_cores=${2} | tc09-9000B-4c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} +| | frame_size=${9000} | phy_cores=${4} | tc10-IMIX-1c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} +| | frame_size=IMIX_v4_1 | phy_cores=${1} | tc11-IMIX-2c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} +| | frame_size=IMIX_v4_1 | phy_cores=${2} | tc12-IMIX-4c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr | | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr.robot index d5bef4fa3f..0c26b546ca 100644 --- a/tests/vpp/perf/crypto/10ge2p1x553-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr.robot @@ -16,17 +16,15 @@ | Resource | resources/libraries/robot/crypto/ipsec.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X553 | TNL_1000 -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-X553 -| ... | HW_C3xxx +| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-X710 | TNL_1000 +| ... | CBC_SHA1 | ... +| Suite Setup | Set up IPSec performance test suite | L3 | ${nic_name} +| ... | HW_DH895xcc | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} +| Test Teardown | Tear down performance test | ... | Test Template | Local Template | ... @@ -39,11 +37,11 @@ | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple | ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it | ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ | ... | Test packets are generated by TG on | ... | links to DUTs. TG traffic profile contains two L3 flow-groups | ... | (flow-group per direction, number of flows per flow-group equals to @@ -55,10 +53,8 @@ | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. *** Variables *** -# X553 bandwidth limit 20Gbps/2=10Gbps -| ${s_10G}= | ${10000000000} -# X553 Mpps limit 29.76Mpps/2=14.88Mpps -| ${s_14.88Mpps}= | ${14880952} +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${58} | ${tg_if1_ip4}= | 192.168.10.2 | ${dut1_if1_ip4}= | 192.168.10.1 | ${dut1_if2_ip4}= | 172.168.1.1 @@ -68,7 +64,6 @@ | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${addr_range}= | ${32} -| ${overhead}= | ${58} | ${n_tunnels}= | ${1000} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} @@ -81,23 +76,22 @@ | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ | | ... | | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). | | ... | Type: integer, string | | ... | - phy_cores - Number of physical cores. Type: integer | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} | | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ${encr_alg} = | Crypto Alg AES CBC 128 -| | ${auth_alg} = | Integ Alg SHA1 96 +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_10G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_14.88Mpps} +| | Set Max Rate And Jumbo And Handle Multi Seg | | And Add cryptodev to all DUTs | ${phy_cores} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -114,53 +108,52 @@ | | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${laddr_ip4} | ${raddr_ip4} | | ... | ${addr_range} | | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} *** Test Cases *** | tc01-64B-1c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} +| | frame_size=${64} | phy_cores=${1} | tc02-64B-2c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} +| | frame_size=${64} | phy_cores=${2} | tc03-64B-4c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} +| | frame_size=${64} | phy_cores=${4} | tc04-1518B-1c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} +| | frame_size=${1518} | phy_cores=${1} | tc05-1518B-2c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} +| | frame_size=${1518} | phy_cores=${2} | tc06-1518B-4c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} +| | frame_size=${1518} | phy_cores=${4} | tc07-9000B-1c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} +| | frame_size=${9000} | phy_cores=${1} | tc08-9000B-2c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} +| | frame_size=${9000} | phy_cores=${2} | tc09-9000B-4c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} +| | frame_size=${9000} | phy_cores=${4} | tc10-IMIX-1c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} +| | frame_size=IMIX_v4_1 | phy_cores=${1} | tc11-IMIX-2c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} +| | frame_size=IMIX_v4_1 | phy_cores=${2} | tc12-IMIX-4c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr | | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdr.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdr.robot index ceec05835c..bb8e19ab81 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdr.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. +# Copyright (c) 2019 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -19,17 +19,14 @@ | Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | IP4FWD | ... | LISPGPE | IPSEC | IPSECHW | IPSECTRAN | ENCAP | IP4UNRLAY | IP4OVRLAY -| ... | NIC_Intel-XL710 +| ... | NIC_Intel-X710 | CBC_SHA1 | ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710 +| Suite Setup | Set up IPSec performance test suite | L3 | ${nic_name} | ... | HW_DH895xcc -| ... | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} +| Test Teardown | Tear down performance test | ... | Test Template | Local Template | ... @@ -43,11 +40,11 @@ | ... | in each direction. IPsec is in transport mode. DUTs get IPv4 traffic\ | ... | from TG, encrypt it and send to another DUT, where packets are\ | ... | decrypted and sent back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ | ... | Test packets are generated by TG on\ | ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ | ... | (flow-group per direction, number of flows per flow-group equals to\ @@ -60,14 +57,11 @@ | ... | RFC2544. *** Variables *** -# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G}= | ${24500000000} -# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps}= | ${18750000} +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${58} | ${dut2_spi}= | ${1000} | ${dut1_spi}= | ${1001} | ${ESP_PROTO}= | ${50} -| ${overhead}= | ${54} # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 @@ -80,23 +74,22 @@ | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ | | ... | | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). | | ... | Type: integer, string | | ... | - phy_cores - Number of physical cores. Type: integer | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} | | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ${encr_alg} = | Crypto Alg AES CBC 128 -| | ${auth_alg} = | Integ Alg SHA1 96 +| | # These are enums (not strings) so they cannot be in Variables table. +| | ${encr_alg}= | Crypto Alg AES CBC 128 +| | ${auth_alg}= | Integ Alg SHA1 96 | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_18.75Mpps} +| | Set Max Rate And Jumbo And Handle Multi Seg | | And Add cryptodev to all DUTs | ${phy_cores} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 @@ -105,53 +98,52 @@ | | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology | | ... | ${encr_alg} | ${auth_alg} | | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} *** Test Cases *** | tc01-64B-1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdr | | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} +| | frame_size=${64} | phy_cores=${1} | tc02-64B-2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdr | | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} +| | frame_size=${64} | phy_cores=${2} | tc03-64B-4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdr | | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} +| | frame_size=${64} | phy_cores=${4} | tc04-1518B-1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdr | | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} +| | frame_size=${1518} | phy_cores=${1} | tc05-1518B-2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdr | | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} +| | frame_size=${1518} | phy_cores=${2} | tc06-1518B-4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdr | | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} +| | frame_size=${1518} | phy_cores=${4} | tc07-9000B-1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdr | | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} +| | frame_size=${9000} | phy_cores=${1} | tc08-9000B-2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdr | | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} +| | frame_size=${9000} | phy_cores=${2} | tc09-9000B-4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdr | | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} +| | frame_size=${9000} | phy_cores=${4} | tc10-IMIX-1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdr | | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} +| | frame_size=IMIX_v4_1 | phy_cores=${1} | tc11-IMIX-2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdr | | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} +| | frame_size=IMIX_v4_1 | phy_cores=${2} | tc12-IMIX-4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdr | | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr.robot deleted file mode 100644 index c757fd7a13..0000000000 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr.robot +++ /dev/null @@ -1,160 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-XL710 | BASE -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710 -| ... | HW_DH895xcc -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G}= | ${24500000000} -# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps}= | ${18750000} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${54} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES GCM config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | ${encr_alg} = | Crypto Alg AES GCM 128 -| | ${auth_alg} = | Integ Alg AES GCM 128 -| | ${ipsec_proto} = | IPsec Proto ESP -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_18.75Mpps} -| | And Add cryptodev to all DUTs | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Backend Dump | ${dut1} -| | And VPP IPsec Backend Dump | ${dut2} -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} -| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr.robot deleted file mode 100644 index bf731862e6..0000000000 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr.robot +++ /dev/null @@ -1,165 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-XL710 | BASE -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710 -| ... | HW_DH895xcc -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G}= | ${24500000000} -# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps}= | ${18750000} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${54} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES GCM config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ${encr_alg} = | Crypto Alg AES GCM 128 -| | ${auth_alg} = | Integ Alg AES GCM 128 -| | ${ipsec_proto} = | IPsec Proto ESP -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_18.75Mpps} -| | And Add cryptodev to all DUTs | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Backend Dump | ${dut1} -| | And VPP IPsec Backend Dump | ${dut2} -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} -| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr.robot deleted file mode 100644 index ae029c6d9c..0000000000 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr.robot +++ /dev/null @@ -1,155 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-XL710 | BASE -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710 -| ... | HW_DH895xcc -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G}= | ${24500000000} -# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps}= | ${18750000} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${58} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling CBC-SHA1 config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | ${encr_alg} = | Crypto Alg AES CBC 128 -| | ${auth_alg} = | Integ Alg SHA1 96 -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_18.75Mpps} -| | And Add cryptodev to all DUTs | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} -| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr.robot deleted file mode 100644 index 2c698a5979..0000000000 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr.robot +++ /dev/null @@ -1,160 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-XL710 | BASE -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710 -| ... | HW_DH895xcc -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G}= | ${24500000000} -# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps}= | ${18750000} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${58} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling CBC-SHA1 config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ${encr_alg} = | Crypto Alg AES CBC 128 -| | ${auth_alg} = | Integ Alg SHA1 96 -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_18.75Mpps} -| | And Add cryptodev to all DUTs | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} -| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr.robot deleted file mode 100644 index 907273e35c..0000000000 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr.robot +++ /dev/null @@ -1,166 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-XL710 | BASE -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710 -| ... | HW_DH895xcc -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G}= | ${24500000000} -# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps}= | ${18750000} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${54} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | ${encr_alg} = | Crypto Alg AES GCM 128 -| | ${auth_alg} = | Integ Alg AES GCM 128 -| | ${ipsec_proto} = | IPsec Proto ESP -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_18.75Mpps} -| | And Add cryptodev to all DUTs | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Backend Dump | ${dut1} -| | And VPP IPsec Backend Dump | ${dut2} -| | And Initialize IPSec in 3-node circular topology -| | And Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | gateway=${dut2_if1_ip4} -| | ... | interface=${dut1_if2} -| | And Vpp Route Add | ${dut2} | ${laddr_ip4} | 8 | gateway=${dut1_if2_ip4} -| | ... | interface=${dut2_if1} -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${dut1} | ${dut2} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} -| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${laddr_ip4} | ${raddr_ip4} -| | ... | ${addr_range} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr.robot deleted file mode 100644 index c967034e71..0000000000 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr.robot +++ /dev/null @@ -1,160 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-XL710 | BASE -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710 -| ... | HW_DH895xcc -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G}= | ${24500000000} -# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps}= | ${18750000} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${58} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | ${encr_alg} = | Crypto Alg AES CBC 128 -| | ${auth_alg} = | Integ Alg SHA1 96 -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_18.75Mpps} -| | And Add cryptodev to all DUTs | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And Initialize IPSec in 3-node circular topology -| | And Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | gateway=${dut2_if1_ip4} -| | ... | interface=${dut1_if2} -| | And Vpp Route Add | ${dut2} | ${laddr_ip4} | 8 | gateway=${dut1_if2_ip4} -| | ... | interface=${dut2_if1} -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${dut1} | ${dut2} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} -| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${laddr_ip4} | ${raddr_ip4} -| | ... | ${addr_range} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr.robot deleted file mode 100644 index 74d2be1a43..0000000000 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr.robot +++ /dev/null @@ -1,162 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-XL710 | BASE -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710 -| ... | SW_cryptodev -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. -| ... | DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G}= | ${24500000000} -# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps}= | ${18750000} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${54} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES GCM config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | ${encr_alg} = | Crypto Alg AES GCM 128 -| | ${auth_alg} = | Integ Alg AES GCM 128 -| | ${ipsec_proto} = | IPsec Proto ESP -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_18.75Mpps} -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_gcm | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Backend Dump | ${dut1} -| | And VPP IPsec Backend Dump | ${dut2} -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} -| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr.robot deleted file mode 100644 index 90584b2bc9..0000000000 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr.robot +++ /dev/null @@ -1,167 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-XL710 | BASE -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710 -| ... | SW_cryptodev -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. -| ... | DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G}= | ${24500000000} -# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps}= | ${18750000} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${54} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES GCM config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ${encr_alg} = | Crypto Alg AES GCM 128 -| | ${auth_alg} = | Integ Alg AES GCM 128 -| | ${ipsec_proto} = | IPsec Proto ESP -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_18.75Mpps} -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_gcm | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Backend Dump | ${dut1} -| | And VPP IPsec Backend Dump | ${dut2} -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} -| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr.robot deleted file mode 100644 index be7b0afdfd..0000000000 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr.robot +++ /dev/null @@ -1,157 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-XL710 | BASE -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710 -| ... | SW_cryptodev -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. -| ... | DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G}= | ${24500000000} -# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps}= | ${18750000} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${54} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling CBC-SHA1 config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | ${encr_alg} = | Crypto Alg AES CBC 128 -| | ${auth_alg} = | Integ Alg SHA1 96 -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_18.75Mpps} -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_mb | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} -| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr.robot deleted file mode 100644 index 7af39faf87..0000000000 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr.robot +++ /dev/null @@ -1,162 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-XL710 | BASE -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710 -| ... | SW_cryptodev -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. -| ... | DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G}= | ${24500000000} -# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps}= | ${18750000} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${54} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling CBC-SHA1 config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ${encr_alg} = | Crypto Alg AES CBC 128 -| | ${auth_alg} = | Integ Alg SHA1 96 -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_18.75Mpps} -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_mb | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} -| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr.robot deleted file mode 100644 index 4e61f0191f..0000000000 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr.robot +++ /dev/null @@ -1,171 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-XL710 | BASE -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710 -| ... | SW_cryptodev -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. DUTs get IPv4 -| ... | traffic from TG, encrypt it and send to another DUT, where packets are -| ... | decrypted and sent back to TG. -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G}= | ${24500000000} -# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps}= | ${18750000} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${54} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES GCM config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - search_type - NDR or PDR. Type: string -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... | - min_rate - Min rate for binary search, default value: ${50000}. -| | ... | Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | ${encr_alg} = | Crypto Alg AES GCM 128 -| | ${auth_alg} = | Integ Alg AES GCM 128 -| | ${ipsec_proto} = | IPsec Proto ESP -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_18.75Mpps} -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_gcm | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Backend Dump | ${dut1} -| | And VPP IPsec Backend Dump | ${dut2} -| | And Initialize IPSec in 3-node circular topology -| | And Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | gateway=${dut2_if1_ip4} -| | ... | interface=${dut1_if2} -| | And Vpp Route Add | ${dut2} | ${laddr_ip4} | 8 | gateway=${dut1_if2_ip4} -| | ... | interface=${dut2_if1} -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${dut1} | ${dut2} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} -| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${laddr_ip4} | ${raddr_ip4} -| | ... | ${addr_range} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr.robot deleted file mode 100644 index e7518bf944..0000000000 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr.robot +++ /dev/null @@ -1,176 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-XL710 | BASE -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710 -| ... | SW_cryptodev -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. DUTs get IPv4 -| ... | traffic from TG, encrypt it and send to another DUT, where packets are -| ... | decrypted and sent back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G}= | ${24500000000} -# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps}= | ${18750000} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${54} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES GCM config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - search_type - NDR or PDR. Type: string -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... | - min_rate - Min rate for binary search, default value: ${50000}. -| | ... | Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ${encr_alg} = | Crypto Alg AES GCM 128 -| | ${auth_alg} = | Integ Alg AES GCM 128 -| | ${ipsec_proto} = | IPsec Proto ESP -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_18.75Mpps} -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_gcm | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Backend Dump | ${dut1} -| | And VPP IPsec Backend Dump | ${dut2} -| | And Initialize IPSec in 3-node circular topology -| | And Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | gateway=${dut2_if1_ip4} -| | ... | interface=${dut1_if2} -| | And Vpp Route Add | ${dut2} | ${laddr_ip4} | 8 | gateway=${dut1_if2_ip4} -| | ... | interface=${dut2_if1} -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${dut1} | ${dut2} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} -| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${laddr_ip4} | ${raddr_ip4} -| | ... | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr.robot deleted file mode 100644 index 57e19831de..0000000000 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr.robot +++ /dev/null @@ -1,166 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-XL710 | BASE -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710 -| ... | SW_cryptodev -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. DUTs get IPv4 -| ... | traffic from TG, encrypt it and send to another DUT, where packets are -| ... | decrypted and sent back to TG. -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G}= | ${24500000000} -# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps}= | ${18750000} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${54} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling CBC-SHA1 config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - search_type - NDR or PDR. Type: string -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... | - min_rate - Min rate for binary search, default value: ${50000}. -| | ... | Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | ${encr_alg} = | Crypto Alg AES CBC 128 -| | ${auth_alg} = | Integ Alg SHA1 96 -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_18.75Mpps} -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_mb | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And Initialize IPSec in 3-node circular topology -| | And Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | gateway=${dut2_if1_ip4} -| | ... | interface=${dut1_if2} -| | And Vpp Route Add | ${dut2} | ${laddr_ip4} | 8 | gateway=${dut1_if2_ip4} -| | ... | interface=${dut2_if1} -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${dut1} | ${dut2} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} -| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${laddr_ip4} | ${raddr_ip4} -| | ... | ${addr_range} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr.robot deleted file mode 100644 index c2ec7ef9fa..0000000000 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr.robot +++ /dev/null @@ -1,171 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR -| ... | IP4FWD | IPSEC | IPSECSW | IPSECTUN | NIC_Intel-XL710 | BASE -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710 -| ... | SW_cryptodev -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with DPDK SW -| ... | crypto devices and multiple IPsec tunnels between them. DUTs get IPv4 -| ... | traffic from TG, encrypt it and send to another DUT, where packets are -| ... | decrypted and sent back to TG. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G}= | ${24500000000} -# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps}= | ${18750000} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${54} -| ${n_tunnels}= | ${1} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling CBC-SHA1 config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - search_type - NDR or PDR. Type: string -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... | - min_rate - Min rate for binary search, default value: ${50000}. -| | ... | Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ${encr_alg} = | Crypto Alg AES CBC 128 -| | ${auth_alg} = | Integ Alg SHA1 96 -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_18.75Mpps} -| | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_mb | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And Initialize IPSec in 3-node circular topology -| | And Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | gateway=${dut2_if1_ip4} -| | ... | interface=${dut1_if2} -| | And Vpp Route Add | ${dut2} | ${laddr_ip4} | 8 | gateway=${dut1_if2_ip4} -| | ... | interface=${dut2_if1} -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${dut1} | ${dut2} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} -| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${laddr_ip4} | ${raddr_ip4} -| | ... | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr.robot deleted file mode 100644 index 4a24131026..0000000000 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr.robot +++ /dev/null @@ -1,162 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | MRR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-XL710 | TNL_1000 -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710 -| ... | HW_DH895xcc -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G}= | ${24500000000} -# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps}= | ${18750000} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${54} -| ${n_tunnels}= | ${1000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES GCM config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | ${encr_alg} = | Crypto Alg AES GCM 128 -| | ${auth_alg} = | Integ Alg AES GCM 128 -| | ${ipsec_proto} = | IPsec Proto ESP -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_18.75Mpps} -| | And Add cryptodev to all DUTs | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And VPP IPsec Backend Dump | ${dut1} -| | And VPP IPsec Backend Dump | ${dut2} -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Backend Dump | ${dut1} -| | And VPP IPsec Backend Dump | ${dut2} -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} -| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr.robot deleted file mode 100644 index a4b544d2d0..0000000000 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr.robot +++ /dev/null @@ -1,167 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-XL710 | TNL_1000 -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710 -| ... | HW_DH895xcc -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G}= | ${24500000000} -# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps}= | ${18750000} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${54} -| ${n_tunnels}= | ${1000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES GCM config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ${encr_alg} = | Crypto Alg AES GCM 128 -| | ${auth_alg} = | Integ Alg AES GCM 128 -| | ${ipsec_proto} = | IPsec Proto ESP -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_18.75Mpps} -| | And Add cryptodev to all DUTs | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And VPP IPsec Backend Dump | ${dut1} -| | And VPP IPsec Backend Dump | ${dut2} -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Backend Dump | ${dut1} -| | And VPP IPsec Backend Dump | ${dut2} -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} -| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr.robot deleted file mode 100644 index b05bd780c5..0000000000 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr.robot +++ /dev/null @@ -1,155 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | MRR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-XL710 | TNL_1000 -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710 -| ... | HW_DH895xcc -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G}= | ${24500000000} -# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps}= | ${18750000} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${58} -| ${n_tunnels}= | ${1000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling CBC-SHA1 config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | ${encr_alg} = | Crypto Alg AES CBC 128 -| | ${auth_alg} = | Integ Alg SHA1 96 -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_18.75Mpps} -| | And Add cryptodev to all DUTs | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} -| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr.robot deleted file mode 100644 index 9d83520773..0000000000 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr.robot +++ /dev/null @@ -1,160 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-XL710 | TNL_1000 -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710 -| ... | HW_DH895xcc -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *RFC2544: Pkt throughput IPv4 IPsec tunnel mode.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G}= | ${24500000000} -# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps}= | ${18750000} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${58} -| ${n_tunnels}= | ${1000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling CBC-SHA1 config. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ${encr_alg} = | Crypto Alg AES CBC 128 -| | ${auth_alg} = | Integ Alg SHA1 96 -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_18.75Mpps} -| | And Add cryptodev to all DUTs | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And Initialize IPSec in 3-node circular topology -| | And VPP IPsec Create Tunnel Interfaces -| | ... | ${dut1} | ${dut2} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2} -| | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${encr_key} | ${auth_alg} -| | ... | ${auth_key} | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr.robot deleted file mode 100644 index 212c71748a..0000000000 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr.robot +++ /dev/null @@ -1,168 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | MRR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-XL710 | TNL_1000 -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710 -| ... | HW_DH895xcc -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G}= | ${24500000000} -# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps}= | ${18750000} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${54} -| ${n_tunnels}= | ${1000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | ${encr_alg} = | Crypto Alg AES GCM 128 -| | ${auth_alg} = | Integ Alg AES GCM 128 -| | ${ipsec_proto} = | IPsec Proto ESP -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_18.75Mpps} -| | And Add cryptodev to all DUTs | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And VPP IPsec Backend Dump | ${dut1} -| | And VPP IPsec Backend Dump | ${dut2} -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Backend Dump | ${dut1} -| | And VPP IPsec Backend Dump | ${dut2} -| | And Initialize IPSec in 3-node circular topology -| | And Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | gateway=${dut2_if1_ip4} -| | ... | interface=${dut1_if2} -| | And Vpp Route Add | ${dut2} | ${laddr_ip4} | 8 | gateway=${dut1_if2_ip4} -| | ... | interface=${dut2_if1} -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${dut1} | ${dut2} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} -| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${laddr_ip4} | ${raddr_ip4} -| | ... | ${addr_range} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr.robot deleted file mode 100644 index dc15f5a77e..0000000000 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr.robot +++ /dev/null @@ -1,173 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-XL710 | TNL_1000 -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710 -| ... | HW_DH895xcc -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G}= | ${24500000000} -# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps}= | ${18750000} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${54} -| ${n_tunnels}= | ${1000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ${encr_alg} = | Crypto Alg AES GCM 128 -| | ${auth_alg} = | Integ Alg AES GCM 128 -| | ${ipsec_proto} = | IPsec Proto ESP -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_18.75Mpps} -| | And Add cryptodev to all DUTs | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And VPP IPsec Backend Dump | ${dut1} -| | And VPP IPsec Backend Dump | ${dut2} -| | And VPP IPsec Select Backend | ${dut1} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Select Backend | ${dut2} | ${ipsec_proto} | index=${1} -| | And VPP IPsec Backend Dump | ${dut1} -| | And VPP IPsec Backend Dump | ${dut2} -| | And Initialize IPSec in 3-node circular topology -| | And Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | gateway=${dut2_if1_ip4} -| | ... | interface=${dut1_if2} -| | And Vpp Route Add | ${dut2} | ${laddr_ip4} | 8 | gateway=${dut1_if2_ip4} -| | ... | interface=${dut2_if1} -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${dut1} | ${dut2} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} -| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${laddr_ip4} | ${raddr_ip4} -| | ... | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr.robot deleted file mode 100644 index 80cc921d4c..0000000000 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr.robot +++ /dev/null @@ -1,161 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | MRR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-XL710 | TNL_1000 -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710 -| ... | HW_DH895xcc -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G}= | ${24500000000} -# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps}= | ${18750000} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${58} -| ${n_tunnels}= | ${1000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUTs run 1000 IPsec tunnels CBC-SHA1 in each direction. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | ${encr_alg} = | Crypto Alg AES CBC 128 -| | ${auth_alg} = | Integ Alg SHA1 96 -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_18.75Mpps} -| | And Add cryptodev to all DUTs | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And Initialize IPSec in 3-node circular topology -| | And Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | gateway=${dut2_if1_ip4} -| | ... | interface=${dut1_if2} -| | And Vpp Route Add | ${dut2} | ${laddr_ip4} | 8 | gateway=${dut1_if2_ip4} -| | ... | interface=${dut2_if1} -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${dut1} | ${dut2} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} -| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${laddr_ip4} | ${raddr_ip4} -| | ... | ${addr_range} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr.robot deleted file mode 100644 index f87d9c4c50..0000000000 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr.robot +++ /dev/null @@ -1,166 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | SCALE | NDRPDR -| ... | IP4FWD | IPSEC | IPSECHW | IPSECTUN | NIC_Intel-XL710 | TNL_1000 -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710 -| ... | HW_DH895xcc -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} -| ... -| Test Template | Local Template -| ... -| Documentation | *IPv4 IPsec tunnel mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn, -| ... | Eth-IPv4-IPSec on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with multiple -| ... | IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it -| ... | and send to another DUT, where packets are decrypted and sent back to TG -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, number of flows per flow-group equals to -| ... | number of IPSec tunnels) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address) field -| ... | is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544. - -*** Variables *** -# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G}= | ${24500000000} -# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps}= | ${18750000} -| ${tg_if1_ip4}= | 192.168.10.2 -| ${dut1_if1_ip4}= | 192.168.10.1 -| ${dut1_if2_ip4}= | 172.168.1.1 -| ${dut2_if1_ip4}= | 172.168.1.2 -| ${dut2_if2_ip4}= | 192.168.20.1 -| ${tg_if2_ip4}= | 192.168.20.2 -| ${raddr_ip4}= | 20.0.0.0 -| ${laddr_ip4}= | 10.0.0.0 -| ${addr_range}= | ${32} -| ${overhead}= | ${58} -| ${n_tunnels}= | ${1000} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] DUTs run 1000 IPsec tunnels CBC-SHA1 in each direction. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} -| | ${encr_alg} = | Crypto Alg AES CBC 128 -| | ${auth_alg} = | Integ Alg SHA1 96 -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_18.75Mpps} -| | And Add cryptodev to all DUTs | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | And Initialize IPSec in 3-node circular topology -| | And Vpp Route Add | ${dut1} | ${raddr_ip4} | 8 | gateway=${dut2_if1_ip4} -| | ... | interface=${dut1_if2} -| | And Vpp Route Add | ${dut2} | ${laddr_ip4} | 8 | gateway=${dut1_if2_ip4} -| | ... | interface=${dut2_if1} -| | And VPP IPsec Add Multiple Tunnels -| | ... | ${dut1} | ${dut2} | ${dut1_if2} | ${dut2_if1} | ${n_tunnels} -| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} -| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${laddr_ip4} | ${raddr_ip4} -| | ... | ${addr_range} -| | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr.robot deleted file mode 100644 index c6ff69c307..0000000000 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr.robot +++ /dev/null @@ -1,152 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| Resource | resources/libraries/robot/crypto/ipsec.robot -| Resource | resources/libraries/robot/overlay/lispgpe.robot -| ... -| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR | IP4FWD -| ... | LISPGPE | IPSEC | IPSECHW | IPSECTRAN | ENCAP | IP4UNRLAY | IP4OVRLAY -| ... | NIC_Intel-XL710 -| ... -| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710 -| ... | HW_DH895xcc -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance mrr test -| ... -| Test Template | Local Template -| ... -| Documentation | *IPv4 IPsec transport mode performance test suite.* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,\ -| ... | Eth-IPv4-IPSec-LISPGPE-IPv4 on DUT1-DUT2 -| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec\ -| ... | in each direction. IPsec is in transport mode. DUTs get IPv4 traffic\ -| ... | from TG, encrypt it and send to another DUT, where packets are\ -| ... | decrypted and sent back to TG. -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, number of flows per flow-group equals to\ -| ... | number of IPSec tunnels) with all packets\ -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address)\ -| ... | field is applied to both streams. -| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303 and\ -| ... | RFC2544. - -*** Variables *** -# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G}= | ${24500000000} -# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps}= | ${18750000} -| ${dut2_spi}= | ${1000} -| ${dut1_spi}= | ${1001} -| ${ESP_PROTO}= | ${50} -| ${overhead}= | ${54} -# Traffic profile: -| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 - -*** Keywords *** -| Local Template -| | [Documentation] -| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\ -| | ... | IPsec is in transport mode. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ -| | ... | trial throughput test. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | ${encr_alg} = | Crypto Alg AES CBC 128 -| | ${auth_alg} = | Integ Alg SHA1 96 -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead} -| | ... | pps_limit=${s_18.75Mpps} -| | And Add cryptodev to all DUTs | ${phy_cores} -| | And Add DPDK dev default RXD to all DUTs | 2048 -| | And Add DPDK dev default TXD to all DUTs | 2048 -| | And Apply startup configuration on all VPP DUTs -| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology -| | ... | ${encr_alg} | ${auth_alg} -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/regenerate_testcases.py b/tests/vpp/perf/crypto/regenerate_testcases.py index 5fabf8b89d..2632018a80 100755 --- a/tests/vpp/perf/crypto/regenerate_testcases.py +++ b/tests/vpp/perf/crypto/regenerate_testcases.py @@ -1,6 +1,6 @@ #!/usr/bin/env python -# Copyright (c) 2018 Cisco and/or its affiliates. +# Copyright (c) 2019 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: |