diff options
Diffstat (limited to 'tests/vpp/perf/honeycomb')
4 files changed, 0 insertions, 332 deletions
diff --git a/tests/vpp/perf/honeycomb/__init__.robot b/tests/vpp/perf/honeycomb/__init__.robot deleted file mode 100644 index b984993139..0000000000 --- a/tests/vpp/perf/honeycomb/__init__.robot +++ /dev/null @@ -1,61 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables*** -# Honeycomb node to run tests on. -| ${node}= | ${nodes['DUT1']} - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/performance.robot -| Library | resources.libraries.python.SetupFramework -| Library | resources.libraries.python.CpuUtils -| Library | resources.libraries.python.honeycomb.Performance -| Suite Setup | Setup suite for Honeycomb performance tests -| Suite Teardown | Run Keywords -| ... | Stop VPP Service on DUT | ${node} -| ... | AND | Archive Honeycomb Log File | ${node} | perf=${True} -| ... | AND | Stop honeycomb service on DUTs | ${node} - -*** Keywords *** -| Setup suite for Honeycomb performance tests -| | [Documentation] | Setup variables and configure VPP and Honeycomb -| | ... | for performance testing. -| | ... -| | Set Global Variable | ${node} -| | ${cores}= | Get Length | ${node['cpuinfo']} -| | Set Global Variable | ${cores} -| | Stop VPP Service on DUT | ${node} -| | Stop Honeycomb service on DUTs | ${node} -| | Generate VPP Startup Configuration for Honeycomb Test on DUT | ${node} -| | Configure Restconf binding address | ${node} -| | Configure Log Level | ${node} | INFO -| | Configure Persistence | ${node} | disable -| | Configure jVPP timeout | ${node} | ${14} -| | Generate Honeycomb startup configuration for performance test -| | ... | ${node} | ${cores} -| | Clear Persisted Honeycomb Configuration | ${node} - -| Configure ODL Client for performance tests -| | [Documentation] | Setup ODL client for performance testing. -| | ... -| | ${use_odl_client}= | Get Variable Value | ${HC_ODL} -| | Run Keyword If | '${use_odl_client}' != '${NONE}' -| | ... | Run Keywords -| | ... | Set Global Variable | ${use_odl_client} -| | ... | AND | Copy ODL client | ${node} | ${HC_ODL} | ~ | ${install_dir} -| | ... | AND | Configure ODL Client Service On DUT | ${node} | ${install_dir} -| | ... | ELSE | Log | Variable HC_ODL is not present. Not using ODL. -| | ... | level=INFO diff --git a/tests/vpp/perf/honeycomb/localhostp1-tcp-netconf16t-crud-read.robot b/tests/vpp/perf/honeycomb/localhostp1-tcp-netconf16t-crud-read.robot deleted file mode 100644 index c13851cc62..0000000000 --- a/tests/vpp/perf/honeycomb/localhostp1-tcp-netconf16t-crud-read.robot +++ /dev/null @@ -1,87 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/honeycomb/performance.robot -| ... -| Suite Setup | Run Keywords -| ... | Configure Honeycomb Netconf threads | ${node} | ${16} -| ... | AND | Honeycomb Performance Suite Setup Generic | ${node} -| ... -| Suite Teardown | Honeycomb Performance Suite Teardown Generic | ${node} -| ... -| Force Tags | HC_PERF -| ... -| Documentation | *Base Netconf operational read test suite with sixteen Netconf -| ... | threads.* -| ... -| ... | *[Top] Network Topologies:* DUT1 single-node topology. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP. -| ... | *[Cfg] DUT configuration:* Default -| ... | *[Ver] verification:* DUT verifies Honeycomb's response times with zero -| ... | error or loss tolerance. Test packets are generated by DUT1 on localhost -| ... | loopback interface. -| ... | Traffic profile contains flow-groups containing REST requests -| ... | for operational reads. -| ... | *[Ref] Applicable standard specifications:* RFC6241. - -*** Test Cases *** -| TC01: Base operational read with 1 TG thread -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in a single thread. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${1} -| | ${entries}= | Set Variable | ${100000} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} - -| TC02: Base operational read with 2 TG threads -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in two threads. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${2} -| | ${entries}= | Set Variable | ${50000} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} - -| TC03: Base operational read with 4 TG threads -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in four threads. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${4} -| | ${entries}= | Set Variable | ${25000} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} - -| TC04: Base operational read with 8 TG threads -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in eigth threads. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${8} -| | ${entries}= | Set Variable | ${12500} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} - -| TC05: Base operational read with 16 TG threads -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in sixteen threads. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${16} -| | ${entries}= | Set Variable | ${6250} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} diff --git a/tests/vpp/perf/honeycomb/localhostp1-tcp-netconf1t-crud-read.robot b/tests/vpp/perf/honeycomb/localhostp1-tcp-netconf1t-crud-read.robot deleted file mode 100644 index d46fdf795b..0000000000 --- a/tests/vpp/perf/honeycomb/localhostp1-tcp-netconf1t-crud-read.robot +++ /dev/null @@ -1,87 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/honeycomb/performance.robot -| ... -| Suite Setup | Run Keywords -| ... | Configure Honeycomb Netconf threads | ${node} | ${1} -| ... | AND | Honeycomb Performance Suite Setup Generic | ${node} -| ... -| Suite Teardown | Honeycomb Performance Suite Teardown Generic | ${node} -| ... -| Force Tags | HC_PERF -| ... -| Documentation | *Base Netconf operational read test suite with one Netconf -| ... | thread.* -| ... -| ... | *[Top] Network Topologies:* DUT1 single-node topology. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP. -| ... | *[Cfg] DUT configuration:* Default -| ... | *[Ver] verification:* DUT verifies Honeycomb's response times with zero -| ... | error or loss tolerance. Test packets are generated by DUT1 on localhost -| ... | loopback interface. -| ... | Traffic profile contains flow-groups containing REST requests -| ... | for operational reads. -| ... | *[Ref] Applicable standard specifications:* RFC6241. - -*** Test Cases *** -| TC01: Base operational read with 1 TG thread -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in a single thread. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${1} -| | ${entries}= | Set Variable | ${100000} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} - -| TC02: Base operational read with 2 TG threads -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in two threads. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${2} -| | ${entries}= | Set Variable | ${50000} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} - -| TC03: Base operational read with 4 TG threads -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in four threads. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${4} -| | ${entries}= | Set Variable | ${25000} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} - -| TC04: Base operational read with 8 TG threads -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in eigth threads. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${8} -| | ${entries}= | Set Variable | ${12500} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} - -| TC05: Base operational read with 16 TG threads -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in sixteen threads. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${16} -| | ${entries}= | Set Variable | ${6250} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} diff --git a/tests/vpp/perf/honeycomb/localhostp1-tcp-netconf8t-crud-read.robot b/tests/vpp/perf/honeycomb/localhostp1-tcp-netconf8t-crud-read.robot deleted file mode 100644 index 9928f15f1d..0000000000 --- a/tests/vpp/perf/honeycomb/localhostp1-tcp-netconf8t-crud-read.robot +++ /dev/null @@ -1,97 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/honeycomb/performance.robot -| ... -| Suite Setup | Run Keywords -| ... | Configure Honeycomb Netconf threads | ${node} | ${8} -| ... | AND | Honeycomb Performance Suite Setup Generic | ${node} -| ... -| Suite Teardown | Honeycomb Performance Suite Teardown Generic | ${node} -| ... -| Force Tags | HC_PERF -| ... -| Documentation | *Base Netconf operational read test suite with eight Netconf -| ... | threads.* -| ... -| ... | *[Top] Network Topologies:* DUT1 single-node topology. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-TCP. -| ... | *[Cfg] DUT configuration:* Default -| ... | *[Ver] verification:* DUT verifies Honeycomb's response times with zero -| ... | error or loss tolerance. Test packets are generated by DUT1 on localhost -| ... | loopback interface. -| ... | Traffic profile contains flow-groups containing REST requests -| ... | for operational reads. -| ... | *[Ref] Applicable standard specifications:* RFC6241. - -*** Test Cases *** -| TC01: Base operational read with 1 TG thread -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in a single thread. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${1} -| | ${entries}= | Set Variable | ${100000} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} - -| TC02: Base operational read with 2 TG threads -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in two threads. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${2} -| | ${entries}= | Set Variable | ${50000} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} - -| TC03: Base operational read with 4 TG threads -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in four threads. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${4} -| | ${entries}= | Set Variable | ${25000} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} - -| TC04: Base operational read with 8 TG threads -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in eigth threads. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${8} -| | ${entries}= | Set Variable | ${12500} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} - -| TC05: Base operational read with 16 TG threads -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in sixteen threads. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${16} -| | ${entries}= | Set Variable | ${6250} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} - -| TC05: Base operational read with 24 TG threads -| | [Documentation] -| | ... | [Ver] Measure response time using single trial throughput test -| | ... | with 100K requests generated in sixteen threads. -| | ${cycles}= | Set Variable | ${1} -| | ${threads}= | Set Variable | ${24} -| | ${entries}= | Set Variable | ${6250} -| | Run base operational read performance trial -| | ... | ${node} | ${cores} | ${cycles} | ${threads} | ${entries} |