diff options
Diffstat (limited to 'tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrpdr.robot')
| -rw-r--r-- | tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrpdr.robot | 144 |
1 files changed, 72 insertions, 72 deletions
diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrpdr.robot index c58515121e..a6579e0fb2 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrpdr.robot @@ -12,28 +12,6 @@ # limitations under the License. *** Settings *** -| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing and two static IPv4 /24 route entries. DUT1 and DUT2 tested with -| ... | 2p10GE NIC X520 Niantic by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. -| ... | Resource | resources/libraries/robot/performance/performance_setup.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR @@ -44,87 +22,109 @@ | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test -| ... | Test Teardown | Tear down performance discovery test | ${min_rate}pps | ... | ${framesize} | ${traffic_profile} | ... -| Test Template | Local template +| Test Template | Local Template +| ... +| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 +| ... | routing and two static IPv4 /24 route entries. DUT1 and DUT2 tested with +| ... | 2p10GE NIC X520 Niantic by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per +| ... | flow-group) with all packets containing Ethernet header, IPv4 header +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | addresses of the TG node interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** # X520-DA2 bandwidth limit -| ${s_limit} | ${10000000000} +| ${s_limit}= | ${10000000000} # Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip4-ip4src253 +| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Local template +| Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Find NDR and PDR for ${framesize} frames using optimized search\ -| | ... | start at 10GE linerate. +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... | | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${20000} -| | ${get_framesize}= | Get Frame Size | ${framesize} -| | ${max_uniditrectional_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | ${max_rate}= | Evaluate | 2*${max_uniditrectional_rate} +| | Set Test Variable | ${min_rate} | ${10000} +| | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | And Run Keyword If | ${get_framesize} < ${1522} -| | ... | Add no multi seg to all DUTs +| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg +| | ... | ${s_limit} | ${framesize} | | And Apply startup configuration on all VPP DUTs -| | And Initialize IPv4 forwarding in 3-node circular topology +| | When Initialize IPv4 forwarding in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} *** Test Cases *** -| tc01-64B-1t1c-ethip4-ip4base-ndrpdr +| tc01-64B-1c-ethip4-ip4base-ndrpdr | | [Tags] | 64B | 1C -| | phy_cores=${1} | framesize=${64} +| | framesize=${64} | phy_cores=${1} -| tc02-1518B-1t1c-ethip4-ip4base-ndrpdr -| | [Tags] | 1518B | 1C -| | phy_cores=${1} | framesize=${1518} +| tc02-64B-2c-ethip4-ip4base-ndrpdr +| | [Tags] | 64B | 2C +| | framesize=${64} | phy_cores=${2} -| tc03-9000B-1t1c-ethip4-ip4base-ndrpdr +| tc03-64B-4c-ethip4-ip4base-ndrpdr +| | [Tags] | 64B | 4C +| | framesize=${64} | phy_cores=${4} + +| tc04-1518B-1c-ethip4-ip4base-ndrpdr | | [Tags] | 1518B | 1C -| | phy_cores=${1} | framesize=${9000} +| | framesize=${1518} | phy_cores=${1} -| tc04-IMIX-1t1c-ethip4-ip4base-ndrpdr -| | [Tags] | IMIX | 1C -| | phy_cores=${1} | framesize=IMIX_v4_1 +| tc05-1518B-2c-ethip4-ip4base-ndrpdr +| | [Tags] | 1518B | 2C +| | framesize=${1518} | phy_cores=${2} -| tc05-64B-2t2c-ethip4-ip4base-ndrpdr -| | [Tags] | 64B | 2C -| | phy_cores=${2} | framesize=${64} +| tc06-1518B-4c-ethip4-ip4base-ndrpdr +| | [Tags] | 1518B | 4C +| | framesize=${1518} | phy_cores=${4} -| tc06-1518B-2t2c-ethip4-ip4base-ndrpdr -| | [Tags] | 1518B | 2C -| | phy_cores=${2} | framesize=${1518} +| tc07-9000B-1c-ethip4-ip4base-ndrpdr +| | [Tags] | 9000B | 1C +| | framesize=${9000} | phy_cores=${1} -| tc07-9000B-2t2c-ethip4-ip4base-ndrpdr +| tc08-9000B-2c-ethip4-ip4base-ndrpdr | | [Tags] | 9000B | 2C -| | phy_cores=${2} | framesize=${9000} - -| tc08-IMIX-2t2c-ethip4-ip4base-ndrpdr -| | [Tags] | IMIX | 2C -| | phy_cores=${2} | framesize=IMIX_v4_1 +| | framesize=${9000} | phy_cores=${2} -| tc09-64B-4t4c-ethip4-ip4base-ndrpdr -| | [Tags] | 64B | 4C -| | phy_cores=${4} | framesize=${64} +| tc09-9000B-4c-ethip4-ip4base-ndrpdr +| | [Tags] | 9000B | 4C +| | framesize=${9000} | phy_cores=${4} -| tc10-1518B-4t4c-ethip4-ip4base-ndrpdr -| | [Tags] | 1518B | 4C -| | phy_cores=${4} | framesize=${1518} +| tc10-IMIX-1c-ethip4-ip4base-ndrpdr +| | [Tags] | IMIX | 1C +| | framesize=IMIX_v4_1 | phy_cores=${1} -| tc11-9000B-4t4c-ethip4-ip4base-ndrpdr -| | [Tags] | 9000B | 4C -| | phy_cores=${4} | framesize=${9000} +| tc11-IMIX-2c-ethip4-ip4base-ndrpdr +| | [Tags] | IMIX | 2C +| | framesize=IMIX_v4_1 | phy_cores=${2} -| tc12-IMIX-4t4c-ethip4-ip4base-ndrpdr +| tc12-IMIX-4c-ethip4-ip4base-ndrpdr | | [Tags] | IMIX | 4C -| | phy_cores=${4} | framesize=IMIX_v4_1 +| | framesize=IMIX_v4_1 | phy_cores=${4} |