diff options
Diffstat (limited to 'tests/vpp/perf/ip4_tunnels')
15 files changed, 411 insertions, 323 deletions
diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot index 1f650bc4df..34b6170257 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale100l2bd100vlan100vxlan-ndrpdr.robot @@ -27,27 +27,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4 -| ... | test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-Dot1Q-IPv4 for L2 switching of IPv4\ +| Documentation | **RFC2544: Pkt throughput L2BD with IEEE 802.1Q and \ +| ... | VXLANoIPv4 test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-Dot1Q-IPv4 for L2 switching of \ +| ... | IPv4. \ | ... | on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with 100 L2\ -| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and\ -| ... | DUT2. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k\ -| ... | flows per flow-group) with all packets containing Ethernet header, IEEE\ -| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload.\ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with 100 \ +| ... | L2 \ +| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and \ +| ... | DUT2. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k \ +| ... | flows per flow-group) with all packets containing Ethernet header, \ +| ... | IEEE \ +| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -69,9 +77,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD forwarding config with VLAN and VXLAN and\ -| | ... | uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD forwarding config with VLAN and \ +| | ... | VXLAN and uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale10l2bd10vlan10vxlan-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale10l2bd10vlan10vxlan-ndrpdr.robot index cf08ca9287..22021e1043 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale10l2bd10vlan10vxlan-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale10l2bd10vlan10vxlan-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4 -| ... | test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-Dot1Q-IPv4 for L2 switching of IPv4\ +| Documentation | **RFC2544: Pkt throughput L2BD with IEEE 802.1Q and \ +| ... | VXLANoIPv4 test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-Dot1Q-IPv4 for L2 switching of \ +| ... | IPv4. \ | ... | on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with 10 L2\ -| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and\ -| ... | DUT2. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k\ -| ... | flows per flow-group) with all packets containing Ethernet header, IEEE\ -| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload.\ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with 10 L2 \ +| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and \ +| ... | DUT2. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k \ +| ... | flows per flow-group) with all packets containing Ethernet header, \ +| ... | IEEE \ +| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -69,9 +76,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD forwarding config with VLAN and VXLAN and\ -| | ... | uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD forwarding config with VLAN and \ +| | ... | VXLAN and uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot index 37de1ec357..07050239d7 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4 -| ... | test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-Dot1Q-IPv4 for L2 switching of IPv4\ +| Documentation | **RFC2544: Pkt throughput L2BD with IEEE 802.1Q and \ +| ... | VXLANoIPv4 test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-Dot1Q-IPv4 for L2 switching of \ +| ... | IPv4. \ | ... | on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with 1k L2\ -| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and\ -| ... | DUT2. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k\ -| ... | flows per flow-group) with all packets containing Ethernet header, IEEE\ -| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload.\ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with 1k L2 \ +| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and \ +| ... | DUT2. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k \ +| ... | flows per flow-group) with all packets containing Ethernet header, \ +| ... | IEEE \ +| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -68,9 +75,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD forwarding config with VLAN and VXLAN and\ -| | ... | uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD forwarding config with VLAN and \ +| | ... | VXLAN and uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr.robot index 47f9da84b5..ed036a3363 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-dot1q--ethip4vxlan-l2bdscale1l2bd1vlan1vxlan-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4 -| ... | test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-Dot1Q-IPv4 for L2 switching of IPv4\ +| Documentation | **RFC2544: Pkt throughput L2BD with IEEE 802.1Q and \ +| ... | VXLANoIPv4 test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-Dot1Q-IPv4 for L2 switching of \ +| ... | IPv4. \ | ... | on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with 1 L2\ -| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and\ -| ... | DUT2. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k\ -| ... | flows per flow-group) with all packets containing Ethernet header, IEEE\ -| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload.\ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with 1 L2 \ +| ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and \ +| ... | DUT2. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k \ +| ... | flows per flow-group) with all packets containing Ethernet header, \ +| ... | IEEE \ +| ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload. \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -68,9 +75,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD forwarding config with VLAN and VXLAN and\ -| | ... | uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD forwarding config with VLAN and \ +| | ... | VXLAN and uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4gtpusw-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4gtpusw-ip4base-ndrpdr.robot index 0c4d5b3f74..743a2ec8aa 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4gtpusw-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4gtpusw-ip4base-ndrpdr.robot @@ -27,25 +27,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput gtpu test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-GTPU on DUT1-DUT2,\ +| Documentation | **RFC2544: Pkt throughput gtpu test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-GTPU on DUT1-DUT2, \ | ... | Eth-IPv4 on TG-DUTn for IPv4 routing over GTPU tunnel. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and static routes. GTPU tunnel is configured between DUT1\ -| ... | and DUT2. DUT1 and DUT2 tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups with all packets containing Ethernet\ -| ... | header, IPv4 header with IP protocol=61 and static payload. MAC\ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and static routes. GTPU tunnel is configured between DUT1 \ +| ... | and DUT2. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups with all packets containing Ethernet \ +| ... | header, IPv4 header with IP protocol=61 and static payload. MAC \ | ... | addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | gtpu_plugin.so @@ -65,9 +70,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs Gtpu hw offload routing config.\ +| | ... | - **[Cfg]** DUT runs Gtpu hw offload routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-ndrpdr.robot index ba594f7aca..687e3e1ba7 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-ndrpdr.robot @@ -30,26 +30,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput Lisp test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4 on DUT1-DUT2,\ +| Documentation | **RFC2544: Pkt throughput Lisp test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-LISP-IPv4 on DUT1-DUT2, \ | ... | Eth-IPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and static routes. LISPoIPv4 tunnel is configured between DUT1\ -| ... | and DUT2. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and static routes. LISPoIPv4 tunnel is configured between DUT1 \ +| ... | and DUT2. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ | ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC6830. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC6830. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so @@ -68,10 +73,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters\ -| | ... | config. +| | ... | - **[Cfg]** DUT runs IPv4 LISP remote static mappings and whitelist \ +| | ... | filters config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip6-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip6-ip4base-ndrpdr.robot index 32e270a13f..3b74615119 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip6-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip6-ip4base-ndrpdr.robot @@ -30,26 +30,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput Lisp test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv6 on DUT1-DUT2,\ +| Documentation | **RFC2544: Pkt throughput Lisp test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-LISP-IPv6 on DUT1-DUT2, \ | ... | Eth-IPv4 on TG-DUTn for IPv4 routing over LISPoIPv6 tunnel. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\ -| ... | routing and static routes. LISPoIPv6 tunnel is configured between DUT1\ -| ... | and DUT2. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \ +| ... | routing and static routes. LISPoIPv6 tunnel is configured between DUT1 \ +| ... | and DUT2. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ | ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC6830. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC6830. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so @@ -68,10 +73,10 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist filters\ -| | ... | config. +| | ... | - **[Cfg]** DUT runs IPv6 LISP remote static mappings and whitelist \ +| | ... | filters config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-ndrpdr.robot index b1692c7877..3b2bd801a6 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-ndrpdr.robot @@ -27,26 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD with VXLANoIPv4 test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4 on\ +| Documentation | **RFC2544: Pkt throughput L2BD with VXLANoIPv4 test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4 \ +| ... | on \ | ... | TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge\ -| ... | domain. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2.\ -| ... | DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\ +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 +| ... | bridge-\ +| ... | domain. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -65,9 +72,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD forwarding config with VXLAN and uses\ +| | ... | - **[Cfg]** Each DUT runs L2BD forwarding config with VXLAN and uses \ | | ... | ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-ndrpdr.robot index f540c9c9e1..5a94a7b350 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-ndrpdr.robot @@ -27,26 +27,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC with VXLANoIPv4 test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross-connect on TG-DUTn. -| ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. VXLAN tunnels are configured between L2XCs on DUT1 and DUT2. -| ... | DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| Documentation | **RFC2544: Pkt throughput L2XC with VXLANoIPv4 test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross-connect on \ +| ... | TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between \ +| ... | DUT1 and DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | cross- connect. VXLAN tunnels are configured between L2XCs on DUT1 \ +| ... | and DUT2. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ | ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -65,9 +71,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config. +| | ... | - **[Cfg]** DUT runs L2XC forwarding config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1024tun-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1024tun-ip4base-ndrpdr.robot index e8c12d3e94..e102e84430 100644 --- a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1024tun-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1024tun-ip4base-ndrpdr.robot @@ -28,29 +28,35 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput GENEVE tunnel L3 mode performance -| ... | test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput GENEVE tunnel L3 mode performance \ +| ... | test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\ -| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\ -| ... | routing over GENEVE tunnels. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\ -| ... | ${n_tunnels} GENEVE tunnels and ${${4} * ${n_tunnels}} static IPv4 /24\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 between TG-if1 and \ +| ... | DUT1-if1 and Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 \ +| ... | for IPv4 routing over GENEVE tunnels. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | over ${n_tunnels} GENEVE tunnels and ${${4} ** ${n_tunnels}} static \ +| ... | IPv4 /24 \ | ... | route entries. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC791, RFC768, -| ... | RFC8926. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC791, \ +| ... | RFC768 and RFC8926. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | geneve_plugin.so @@ -81,9 +87,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration. +| | ... | - **[Cfg]** DUT runs GENEVE ${gen_mode} mode configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-16tun-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-16tun-ip4base-ndrpdr.robot index 68ac42d623..e99117ba82 100644 --- a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-16tun-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-16tun-ip4base-ndrpdr.robot @@ -28,29 +28,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput GENEVE tunnel L3 mode performance -| ... | test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput GENEVE tunnel L3 mode performance \ +| ... | test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\ -| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\ -| ... | routing over GENEVE tunnels. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\ -| ... | ${n_tunnels} GENEVE tunnels and ${${4} * ${n_tunnels}} static IPv4 /24\ -| ... | route entries. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 between TG-if1 and \ +| ... | DUT1-if1 and Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 \ +| ... | for IPv4 routing over GENEVE tunnels. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | over ${n_tunnels} GENEVE tunnels and ${${4} ** ${n_tunnels}} static \ +| ... | IPv4 /24 route entries. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC791, RFC768, -| ... | RFC8926. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC791, \ +| ... | RFC768 and RFC8926. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | geneve_plugin.so @@ -81,9 +86,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration. +| | ... | - **[Cfg]** DUT runs GENEVE ${gen_mode} mode configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1tun-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1tun-ip4base-ndrpdr.robot index 291fb98659..f0624a207e 100644 --- a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1tun-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-1tun-ip4base-ndrpdr.robot @@ -28,29 +28,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput GENEVE tunnel L3 mode performance -| ... | test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput GENEVE tunnel L3 mode performance \ +| ... | test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\ -| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\ -| ... | routing over GENEVE tunnel. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\ -| ... | GENEVE tunnel and 4 static IPv4 /24 route entries.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 between TG-if1 and \ +| ... | DUT1-if1 and Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 \ +| ... | for IPv4 routing over GENEVE tunnel. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | over GENEVE tunnel and 4 static IPv4 /24 route entries. \ | ... | DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC791, RFC768, -| ... | RFC8926. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC791, \ +| ... | RFC768 and RFC8926. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | geneve_plugin.so @@ -81,9 +86,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration. +| | ... | - **[Cfg]** DUT runs GENEVE ${gen_mode} mode configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-256tun-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-256tun-ip4base-ndrpdr.robot index 00b5db7b2e..aae9332a0f 100644 --- a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-256tun-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-256tun-ip4base-ndrpdr.robot @@ -28,29 +28,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput GENEVE tunnel L3 mode performance -| ... | test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput GENEVE tunnel L3 mode performance \ +| ... | test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\ -| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\ -| ... | routing over GENEVE tunnels. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\ -| ... | ${n_tunnels} GENEVE tunnels and ${${4} * ${n_tunnels}} static IPv4 /24\ -| ... | route entries. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 between TG-if1 and \ +| ... | DUT1-if1 and Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 \ +| ... | for IPv4 routing over GENEVE tunnels. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | over ${n_tunnels} GENEVE tunnels and ${${4} ** ${n_tunnels}} static \ +| ... | IPv4 /24 route entries. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC791, RFC768, -| ... | RFC8926. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC791, \ +| ... | RFC768 and RFC8926. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | geneve_plugin.so @@ -81,9 +86,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration. +| | ... | - **[Cfg]** DUT runs GENEVE ${gen_mode} mode configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-4tun-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-4tun-ip4base-ndrpdr.robot index 63d70d72ec..4d9cd4fb92 100644 --- a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-4tun-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-4tun-ip4base-ndrpdr.robot @@ -28,29 +28,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput GENEVE tunnel L3 mode performance -| ... | test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput GENEVE tunnel L3 mode performance \ +| ... | test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\ -| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\ -| ... | routing over GENEVE tunnels. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\ -| ... | ${n_tunnels} GENEVE tunnels and ${${4} * ${n_tunnels}} static IPv4 /24\ -| ... | route entries. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 between TG-if1 and \ +| ... | DUT1-if1 and Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 \ +| ... | for IPv4 routing over GENEVE tunnels. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | over ${n_tunnels} GENEVE tunnels and ${${4} ** ${n_tunnels}} static \ +| ... | IPv4 /24 route entries. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC791, RFC768, -| ... | RFC8926. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC791, \ +| ... | RFC768 and RFC8926. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | geneve_plugin.so @@ -81,9 +86,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration. +| | ... | - **[Cfg]** DUT runs GENEVE ${gen_mode} mode configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-64tun-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-64tun-ip4base-ndrpdr.robot index de057a28eb..d4ad8918a7 100644 --- a/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-64tun-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/2n1l-10ge2p1x710-ethip4--ethip4udpgeneve-64tun-ip4base-ndrpdr.robot @@ -28,29 +28,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput GENEVE tunnel L3 mode performance -| ... | test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput GENEVE tunnel L3 mode performance \ +| ... | test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\ -| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\ -| ... | routing over GENEVE tunnels. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\ -| ... | ${n_tunnels} GENEVE tunnels and ${${4} * ${n_tunnels}} static IPv4 /24\ -| ... | route entries. DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 between TG-if1 and \ +| ... | DUT1-if1 and Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 \ +| ... | for IPv4 routing over GENEVE tunnels. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4 routing \ +| ... | over ${n_tunnels} GENEVE tunnels and ${${4} ** ${n_tunnels}} static \ +| ... | IPv4 /24 route entries. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 1 flow per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC791, RFC768, -| ... | RFC8926. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544, RFC791, \ +| ... | RFC768 and RFC8926. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | geneve_plugin.so @@ -81,9 +86,9 @@ | Local Template | | | | [Documentation] -| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration. +| | ... | - **[Cfg]** DUT runs GENEVE ${gen_mode} mode configuration. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). |