diff options
Diffstat (limited to 'tests/vpp/perf/ip4_tunnels')
6 files changed, 849 insertions, 4 deletions
diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr.robot new file mode 100644 index 0000000000..dec630fb09 --- /dev/null +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr.robot @@ -0,0 +1,169 @@ +# Copyright (c) 2022 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/wireguard/wireguard.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000 +| ... | IP4FWD | NIC_Intel-X710 | WIREGUARD | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4udpwireguard1000tnlsw-ip4base +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 WireGuard tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-UDP-WireGuard on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple WireGuard tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | and send to another DUT, where packets are decrypted and sent back \ +| ... | to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of WireGuard tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.src and IP.dst \ +| ... | are applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so +| ... | wireguard_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${60} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 200.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${wg_if1_ip4}= | 1.0.0.1 +| ${wg_if2_ip4}= | 1.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${n_tunnels}= | ${1000} +| ${listen_port}= | ${51820} +| ${keepalive_time}= | ${256} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src${n_tunnels}ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs wireguard tunnel config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize WireGuard in 3-node circular topology +| | And VPP WireGuard Create Tunnel Interfaces On DUTs +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] +| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2_mac}[0] +| | ... | ${DUT2_${int}1_mac}[0] | ${wg_if1_ip4} | ${wg_if2_ip4} +| | ... | ${n_tunnels} | ${listen_port} | ${keepalive_time} +| | ... | ${laddr_ip4} | ${raddr_ip4} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard100tnlsw-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard100tnlsw-ip4base-ndrpdr.robot new file mode 100644 index 0000000000..8536ef2d62 --- /dev/null +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard100tnlsw-ip4base-ndrpdr.robot @@ -0,0 +1,169 @@ +# Copyright (c) 2022 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/wireguard/wireguard.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_100 +| ... | IP4FWD | NIC_Intel-X710 | WIREGUARD | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4udpwireguard100tnlsw-ip4base +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 WireGuard tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-UDP-WireGuard on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple WireGuard tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | and send to another DUT, where packets are decrypted and sent back \ +| ... | to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of WireGuard tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.src and IP.dst \ +| ... | are applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so +| ... | wireguard_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${60} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 200.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${wg_if1_ip4}= | 1.0.0.1 +| ${wg_if2_ip4}= | 1.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${n_tunnels}= | ${100} +| ${listen_port}= | ${51820} +| ${keepalive_time}= | ${256} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src${n_tunnels}ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs wireguard tunnel config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize WireGuard in 3-node circular topology +| | And VPP WireGuard Create Tunnel Interfaces On DUTs +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] +| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2_mac}[0] +| | ... | ${DUT2_${int}1_mac}[0] | ${wg_if1_ip4} | ${wg_if2_ip4} +| | ... | ${n_tunnels} | ${listen_port} | ${keepalive_time} +| | ... | ${laddr_ip4} | ${raddr_ip4} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4udpwireguard100tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4udpwireguard100tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4udpwireguard100tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4udpwireguard100tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4udpwireguard100tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4udpwireguard100tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4udpwireguard100tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4udpwireguard100tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4udpwireguard100tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4udpwireguard100tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4udpwireguard100tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4udpwireguard100tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard1tnlsw-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard1tnlsw-ip4base-ndrpdr.robot index 13d95512cd..5f611a8ee2 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard1tnlsw-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard1tnlsw-ip4base-ndrpdr.robot @@ -77,15 +77,15 @@ | ${dut2_if1_ip4}= | 200.0.0.2 | ${dut2_if2_ip4}= | 192.168.20.1 | ${tg_if2_ip4}= | 192.168.20.2 -| ${wg_if1_ip4}= | 192.168.110.1 -| ${wg_if2_ip4}= | 192.168.120.1 +| ${wg_if1_ip4}= | 1.0.0.1 +| ${wg_if2_ip4}= | 1.0.0.2 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${n_tunnels}= | ${1} | ${listen_port}= | ${51820} | ${keepalive_time}= | ${256} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src${n_tunnels}ip4dst${n_tunnels} *** Keywords *** | Local Template @@ -111,7 +111,7 @@ | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface | | And Initialize WireGuard in 3-node circular topology -| | And VPP WireGuard Create Tunnel Interface On DUTs +| | And VPP WireGuard Create Tunnel Interfaces On DUTs | | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2_mac}[0] | | ... | ${DUT2_${int}1_mac}[0] | ${wg_if1_ip4} | ${wg_if2_ip4} diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard2tnlsw-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard2tnlsw-ip4base-ndrpdr.robot new file mode 100644 index 0000000000..05e642d1a1 --- /dev/null +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard2tnlsw-ip4base-ndrpdr.robot @@ -0,0 +1,169 @@ +# Copyright (c) 2022 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/wireguard/wireguard.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_2 +| ... | IP4FWD | NIC_Intel-X710 | WIREGUARD | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4udpwireguard2tnlsw-ip4base +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 WireGuard tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-UDP-WireGuard on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple WireGuard tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | and send to another DUT, where packets are decrypted and sent back \ +| ... | to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of WireGuard tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.src and IP.dst \ +| ... | are applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so +| ... | wireguard_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${60} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 200.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${wg_if1_ip4}= | 1.0.0.1 +| ${wg_if2_ip4}= | 1.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${n_tunnels}= | ${2} +| ${listen_port}= | ${51820} +| ${keepalive_time}= | ${256} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src${n_tunnels}ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs wireguard tunnel config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize WireGuard in 3-node circular topology +| | And VPP WireGuard Create Tunnel Interfaces On DUTs +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] +| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2_mac}[0] +| | ... | ${DUT2_${int}1_mac}[0] | ${wg_if1_ip4} | ${wg_if2_ip4} +| | ... | ${n_tunnels} | ${listen_port} | ${keepalive_time} +| | ... | ${laddr_ip4} | ${raddr_ip4} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4udpwireguard2tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4udpwireguard2tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4udpwireguard2tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4udpwireguard2tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4udpwireguard2tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4udpwireguard2tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4udpwireguard2tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4udpwireguard2tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4udpwireguard2tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4udpwireguard2tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4udpwireguard2tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4udpwireguard2tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard4tnlsw-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard4tnlsw-ip4base-ndrpdr.robot new file mode 100644 index 0000000000..48af908725 --- /dev/null +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard4tnlsw-ip4base-ndrpdr.robot @@ -0,0 +1,169 @@ +# Copyright (c) 2022 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/wireguard/wireguard.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4 +| ... | IP4FWD | NIC_Intel-X710 | WIREGUARD | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4udpwireguard4tnlsw-ip4base +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 WireGuard tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-UDP-WireGuard on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple WireGuard tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | and send to another DUT, where packets are decrypted and sent back \ +| ... | to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of WireGuard tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.src and IP.dst \ +| ... | are applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so +| ... | wireguard_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${60} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 200.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${wg_if1_ip4}= | 1.0.0.1 +| ${wg_if2_ip4}= | 1.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${n_tunnels}= | ${4} +| ${listen_port}= | ${51820} +| ${keepalive_time}= | ${256} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src${n_tunnels}ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs wireguard tunnel config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize WireGuard in 3-node circular topology +| | And VPP WireGuard Create Tunnel Interfaces On DUTs +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] +| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2_mac}[0] +| | ... | ${DUT2_${int}1_mac}[0] | ${wg_if1_ip4} | ${wg_if2_ip4} +| | ... | ${n_tunnels} | ${listen_port} | ${keepalive_time} +| | ... | ${laddr_ip4} | ${raddr_ip4} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4udpwireguard4tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4udpwireguard4tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4udpwireguard4tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4udpwireguard4tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4udpwireguard4tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4udpwireguard4tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4udpwireguard4tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4udpwireguard4tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4udpwireguard4tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4udpwireguard4tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4udpwireguard4tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4udpwireguard4tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard8tnlsw-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard8tnlsw-ip4base-ndrpdr.robot new file mode 100644 index 0000000000..1f321e0683 --- /dev/null +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard8tnlsw-ip4base-ndrpdr.robot @@ -0,0 +1,169 @@ +# Copyright (c) 2022 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/wireguard/wireguard.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_8 +| ... | IP4FWD | NIC_Intel-X710 | WIREGUARD | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4udpwireguard8tnlsw-ip4base +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 WireGuard tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-UDP-WireGuard on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple WireGuard tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | and send to another DUT, where packets are decrypted and sent back \ +| ... | to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of WireGuard tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.src and IP.dst \ +| ... | are applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so +| ... | wireguard_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${60} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 200.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${wg_if1_ip4}= | 1.0.0.1 +| ${wg_if2_ip4}= | 1.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${n_tunnels}= | ${8} +| ${listen_port}= | ${51820} +| ${keepalive_time}= | ${256} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src${n_tunnels}ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs wireguard tunnel config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize WireGuard in 3-node circular topology +| | And VPP WireGuard Create Tunnel Interfaces On DUTs +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] +| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2_mac}[0] +| | ... | ${DUT2_${int}1_mac}[0] | ${wg_if1_ip4} | ${wg_if2_ip4} +| | ... | ${n_tunnels} | ${listen_port} | ${keepalive_time} +| | ... | ${laddr_ip4} | ${raddr_ip4} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4udpwireguard8tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4udpwireguard8tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4udpwireguard8tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4udpwireguard8tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4udpwireguard8tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4udpwireguard8tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4udpwireguard8tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4udpwireguard8tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4udpwireguard8tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4udpwireguard8tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4udpwireguard8tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4udpwireguard8tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} |