aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot
diff options
context:
space:
mode:
Diffstat (limited to 'tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot')
-rw-r--r--tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot55
1 files changed, 26 insertions, 29 deletions
diff --git a/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot
index 14645f8c1c..91a80e6a0e 100644
--- a/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot
+++ b/tests/vpp/perf/ip6/10ge2p1x710-dot1q-ip6base-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
+# Copyright (c) 2019 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
@@ -18,11 +18,11 @@
| ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | DOT1Q | IP6BASE
| ...
| Suite Setup | Set up 3-node performance topology with DUT's NIC model
-| ... | L3 | Intel-X710
+| ... | L3 | ${nic_name}
| Suite Teardown | Tear down 3-node performance topology
| ...
| Test Setup | Set up performance test
-| Test Teardown | Tear down performance mrr test
+| Test Teardown | Tear down performance test
| ...
| Test Template | Local Template
| ...
@@ -35,12 +35,13 @@
| ... | tagging is applied on link between DUT1 and DUT2.
| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
| ... | routing and two static IPv6 /64 route entries. DUT1 and DUT2 are tested\
-| ... | with 2p10GE NIC X710 by Intel.
+| ... | with ${nic_name}.\
| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library. Test packets are\
+| ... | Ethernet L2 frame sizes using MLRsearch library.\
+| ... | Test packets are\
| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\
| ... | flow-groups (flow-group per direction, 253 flows per flow-group) with\
| ... | all packets containing Ethernet header, IPv6 header with IP\
@@ -49,11 +50,10 @@
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
+| ${nic_name}= | Intel-X710
+| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
-| ${overhead}= | ${4}
-# X710 bandwidth limit
-| ${s_limit}= | ${10000000000}
# TG subnets used by T-Rex
| ${tg_if1_net}= | 2001:1::0
| ${tg_if2_net}= | 2001:2::0
@@ -65,74 +65,71 @@
| | [Documentation]
| | ... | [Cfg] Each DUT runs IPv6 routing with VLAN and uses ${phy_cores}\
| | ... | physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
| | ...
| | ... | *Arguments:*
-| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
| | ... | Type: integer, string
| | ... | - phy_cores - Number of physical cores. Type: integer
| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
| | ...
-| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
| | ...
-| | Set Test Variable | ${framesize}
-| | Set Test Variable | ${min_rate} | ${10000}
+| | Set Test Variable | \${frame_size}
| | ...
| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
| | And Add PCI devices to all DUTs
-| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
-| | ... | ${s_limit} | ${framesize} | overhead=${overhead}
+| | Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
| | When Initialize IPv6 forwarding with VLAN dot1q sub-interfaces in circular topology
| | ... | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite}
| | Then Find NDR and PDR intervals using optimized search
-| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate}
*** Test Cases ***
| tc01-78B-1c-dot1q-ip6base-ndrpdr
| | [Tags] | 78B | 1C
-| | framesize=${78} | phy_cores=${1}
+| | frame_size=${78} | phy_cores=${1}
| tc02-78B-2c-dot1q-ip6base-ndrpdr
| | [Tags] | 78B | 2C
-| | framesize=${78} | phy_cores=${2}
+| | frame_size=${78} | phy_cores=${2}
| tc03-78B-4c-dot1q-ip6base-ndrpdr
| | [Tags] | 78B | 4C
-| | framesize=${78} | phy_cores=${4}
+| | frame_size=${78} | phy_cores=${4}
| tc04-1518B-1c-dot1q-ip6base-ndrpdr
| | [Tags] | 1518B | 1C
-| | framesize=${1518} | phy_cores=${1}
+| | frame_size=${1518} | phy_cores=${1}
| tc05-1518B-2c-dot1q-ip6base-ndrpdr
| | [Tags] | 1518B | 2C
-| | framesize=${1518} | phy_cores=${2}
+| | frame_size=${1518} | phy_cores=${2}
| tc06-1518B-4c-dot1q-ip6base-ndrpdr
| | [Tags] | 1518B | 4C
-| | framesize=${1518} | phy_cores=${4}
+| | frame_size=${1518} | phy_cores=${4}
| tc07-9000B-1c-dot1q-ip6base-ndrpdr
| | [Tags] | 9000B | 1C
-| | framesize=${9000} | phy_cores=${1}
+| | frame_size=${9000} | phy_cores=${1}
| tc08-9000B-2c-dot1q-ip6base-ndrpdr
| | [Tags] | 9000B | 2C
-| | framesize=${9000} | phy_cores=${2}
+| | frame_size=${9000} | phy_cores=${2}
| tc09-9000B-4c-dot1q-ip6base-ndrpdr
| | [Tags] | 9000B | 4C
-| | framesize=${9000} | phy_cores=${4}
+| | frame_size=${9000} | phy_cores=${4}
| tc10-IMIX-1c-dot1q-ip6base-ndrpdr
| | [Tags] | IMIX | 1C
-| | framesize=IMIX_v4_1 | phy_cores=${1}
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
| tc11-IMIX-2c-dot1q-ip6base-ndrpdr
| | [Tags] | IMIX | 2C
-| | framesize=IMIX_v4_1 | phy_cores=${2}
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
| tc12-IMIX-4c-dot1q-ip6base-ndrpdr
| | [Tags] | IMIX | 4C
-| | framesize=IMIX_v4_1 | phy_cores=${4}
+| | frame_size=IMIX_v4_1 | phy_cores=${4}