aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/perf/ip6_tunnels
diff options
context:
space:
mode:
Diffstat (limited to 'tests/vpp/perf/ip6_tunnels')
-rw-r--r--tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip4-ip6base-mrr.robot134
-rw-r--r--tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip6-ip6base-mrr.robot134
-rw-r--r--tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip4-ip6base-ndrpdr.robot (renamed from tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip4-ip6base-ndrpdr.robot)53
-rw-r--r--tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip6-ip6base-ndrpdr.robot (renamed from tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip6-ip6base-ndrpdr.robot)54
-rwxr-xr-xtests/vpp/perf/ip6_tunnels/regenerate_testcases.py2
5 files changed, 48 insertions, 329 deletions
diff --git a/tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip4-ip6base-mrr.robot b/tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip4-ip6base-mrr.robot
deleted file mode 100644
index 7e5605564d..0000000000
--- a/tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip4-ip6base-mrr.robot
+++ /dev/null
@@ -1,134 +0,0 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| Resource | resources/libraries/robot/overlay/lisp_static_adjacency.robot
-| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
-| ... | NIC_Intel-X520-DA2 | IP6FWD | ENCAP | LISP | IP4UNRLAY | IP6OVRLAY
-| ...
-| Suite Setup | Set up 3-node performance topology with DUT's NIC model
-| ... | L3 | Intel-X520-DA2
-| Suite Teardown | Tear down 3-node performance topology
-| ...
-| Test Setup | Set up performance test
-| ...
-| Test Teardown | Tear down performance mrr test
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | *RFC6830: Pkt throughput Lisp test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.\
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv4 on DUT1-DUT2,\
-| ... | Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.\
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
-| ... | routing and static routes. LISPoIPv4 tunnel is configured between\
-| ... | DUT1 and DUT2. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic\
-| ... | by Intel.\
-| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\
-| ... | at line rate and reports total received/sent packets over trial period.\
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
-
-*** Variables ***
-# X520-DA2 bandwidth limit
-| ${s_limit}= | ${10000000000}
-# LISP overhead
-| ${overhead}= | 48
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
-| | ... | filters config.\
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.\
-| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\
-| | ... | trial throughput test.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
-| | ... | ${s_limit} | ${framesize} | overhead=${overhead}
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology
-| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
-| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
-| | And Configure LISP topology in 3-node circular topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
-| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
-| | Then Traffic should pass with maximum rate
-| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
-
-*** Test Cases ***
-| tc01-78B-1c-ethip6lispip4-ip6base-mrr
-| | [Tags] | 78B | 1C
-| | framesize=${78} | phy_cores=${1}
-
-| tc02-78B-2c-ethip6lispip4-ip6base-mrr
-| | [Tags] | 78B | 2C
-| | framesize=${78} | phy_cores=${2}
-
-| tc03-78B-4c-ethip6lispip4-ip6base-mrr
-| | [Tags] | 78B | 4C
-| | framesize=${78} | phy_cores=${4}
-
-| tc04-1518B-1c-ethip6lispip4-ip6base-mrr
-| | [Tags] | 1518B | 1C
-| | framesize=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-ethip6lispip4-ip6base-mrr
-| | [Tags] | 1518B | 2C
-| | framesize=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-ethip6lispip4-ip6base-mrr
-| | [Tags] | 1518B | 4C
-| | framesize=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-ethip6lispip4-ip6base-mrr
-| | [Tags] | 9000B | 1C
-| | framesize=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-ethip6lispip4-ip6base-mrr
-| | [Tags] | 9000B | 2C
-| | framesize=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-ethip6lispip4-ip6base-mrr
-| | [Tags] | 9000B | 4C
-| | framesize=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-ethip6lispip4-ip6base-mrr
-| | [Tags] | IMIX | 1C
-| | framesize=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-ethip6lispip4-ip6base-mrr
-| | [Tags] | IMIX | 2C
-| | framesize=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-ethip6lispip4-ip6base-mrr
-| | [Tags] | IMIX | 4C
-| | framesize=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip6-ip6base-mrr.robot b/tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip6-ip6base-mrr.robot
deleted file mode 100644
index 0a59c8559d..0000000000
--- a/tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip6-ip6base-mrr.robot
+++ /dev/null
@@ -1,134 +0,0 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| Resource | resources/libraries/robot/overlay/lisp_static_adjacency.robot
-| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
-| ... | NIC_Intel-X520-DA2 | IP6FWD | ENCAP | LISP | IP6UNRLAY | IP6OVRLAY
-| ...
-| Suite Setup | Set up 3-node performance topology with DUT's NIC model
-| ... | L3 | Intel-X520-DA2
-| Suite Teardown | Tear down 3-node performance topology
-| ...
-| Test Setup | Set up performance test
-| ...
-| Test Teardown | Tear down performance mrr test
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | *RFC6830: Pkt throughput Lisp test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.\
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv6 on DUT1-DUT2,\
-| ... | Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.\
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
-| ... | routing and static routes. LISPoIPv6 tunnel is configured between\
-| ... | DUT1 and DUT2. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic\
-| ... | by Intel.\
-| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\
-| ... | at line rate and reports total received/sent packets over trial period.\
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
-
-*** Variables ***
-# X520-DA2 bandwidth limit
-| ${s_limit}= | ${10000000000}
-# LISP overhead
-| ${overhead}= | 8
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist\
-| | ... | filters config.\
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.\
-| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\
-| | ... | trial throughput test.\
-| | ...
-| | ... | *Arguments:*
-| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
-| | ... | ${s_limit} | ${framesize} | overhead=${overhead}
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize LISP IPv6 forwarding in 3-node circular topology
-| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
-| | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Configure LISP topology in 3-node circular topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
-| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
-| | Then Traffic should pass with maximum rate
-| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
-
-*** Test Cases ***
-| tc01-78B-1c-ethip6lispip6-ip6base-mrr
-| | [Tags] | 78B | 1C
-| | framesize=${78} | phy_cores=${1}
-
-| tc02-78B-2c-ethip6lispip6-ip6base-mrr
-| | [Tags] | 78B | 2C
-| | framesize=${78} | phy_cores=${2}
-
-| tc03-78B-4c-ethip6lispip6-ip6base-mrr
-| | [Tags] | 78B | 4C
-| | framesize=${78} | phy_cores=${4}
-
-| tc04-1518B-1c-ethip6lispip6-ip6base-mrr
-| | [Tags] | 1518B | 1C
-| | framesize=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-ethip6lispip6-ip6base-mrr
-| | [Tags] | 1518B | 2C
-| | framesize=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-ethip6lispip6-ip6base-mrr
-| | [Tags] | 1518B | 4C
-| | framesize=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-ethip6lispip6-ip6base-mrr
-| | [Tags] | 9000B | 1C
-| | framesize=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-ethip6lispip6-ip6base-mrr
-| | [Tags] | 9000B | 2C
-| | framesize=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-ethip6lispip6-ip6base-mrr
-| | [Tags] | 9000B | 4C
-| | framesize=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-ethip6lispip6-ip6base-mrr
-| | [Tags] | IMIX | 1C
-| | framesize=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-ethip6lispip6-ip6base-mrr
-| | [Tags] | IMIX | 2C
-| | framesize=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-ethip6lispip6-ip6base-mrr
-| | [Tags] | IMIX | 4C
-| | framesize=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip4-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip4-ip6base-ndrpdr.robot
index c4e7d8e1f7..f3533d81c7 100644
--- a/tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip4-ip6base-ndrpdr.robot
+++ b/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip4-ip6base-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
+# Copyright (c) 2019 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
@@ -17,16 +17,14 @@
| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X520-DA2 | IP6FWD | ENCAP | LISP | IP4UNRLAY | IP6OVRLAY
+| ... | NIC_Intel-X710 | IP6FWD | ENCAP | LISP | IP4UNRLAY | IP6OVRLAY
| ...
| Suite Setup | Set up 3-node performance topology with DUT's NIC model
-| ... | L3 | Intel-X520-DA2
+| ... | L3 | ${nic_name}
| Suite Teardown | Tear down 3-node performance topology
| ...
| Test Setup | Set up performance test
-| ...
-| Test Teardown | Tear down performance discovery test | ${min_rate}pps
-| ... | ${framesize} | ${traffic_profile}
+| Test Teardown | Tear down performance test
| ...
| Test Template | Local Template
| ...
@@ -38,18 +36,16 @@
| ... | Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.\
| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
| ... | routing and static routes. LISPoIPv4 tunnel is configured between\
-| ... | DUT1 and DUT2. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic\
-| ... | by Intel.\
+| ... | DUT1 and DUT2. DUT1 and DUT2 tested with ${nic_name}.\
| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
| ... | of packets transmitted. NDR and PDR are discovered for different\
| ... | Ethernet L2 frame sizes using MLRsearch library.\
| ... | *[Ref] Applicable standard specifications:* RFC6830.
*** Variables ***
-# X520-DA2 bandwidth limit
-| ${s_limit}= | ${10000000000}
+| ${nic_name}= | Intel-X710
# LISP overhead
| ${overhead}= | 48
# Traffic profile:
@@ -64,20 +60,18 @@
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
| | ...
| | ... | *Arguments:*
-| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | - frame_size - Frame size in Bytes as integer or string (IMIX_v4_1).
| | ... | Type: integer, string
| | ... | - phy_cores - Number of physical cores. Type: integer
| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
| | ...
-| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
| | ...
-| | Set Test Variable | ${framesize}
-| | Set Test Variable | ${min_rate} | ${10000}
+| | Set Test Variable | \${frame_size}
| | ...
| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
| | And Add PCI devices to all DUTs
-| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
-| | ... | ${s_limit} | ${framesize} | overhead=${overhead}
+| | Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
@@ -88,53 +82,52 @@
| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
| | Then Find NDR and PDR intervals using optimized search
-| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate}
*** Test Cases ***
| tc01-78B-1c-ethip6lispip4-ip6base-ndrpdr
| | [Tags] | 78B | 1C
-| | framesize=${78} | phy_cores=${1}
+| | frame_size=${78} | phy_cores=${1}
| tc02-78B-2c-ethip6lispip4-ip6base-ndrpdr
| | [Tags] | 78B | 2C
-| | framesize=${78} | phy_cores=${2}
+| | frame_size=${78} | phy_cores=${2}
| tc03-78B-4c-ethip6lispip4-ip6base-ndrpdr
| | [Tags] | 78B | 4C
-| | framesize=${78} | phy_cores=${4}
+| | frame_size=${78} | phy_cores=${4}
| tc04-1518B-1c-ethip6lispip4-ip6base-ndrpdr
| | [Tags] | 1518B | 1C
-| | framesize=${1518} | phy_cores=${1}
+| | frame_size=${1518} | phy_cores=${1}
| tc05-1518B-2c-ethip6lispip4-ip6base-ndrpdr
| | [Tags] | 1518B | 2C
-| | framesize=${1518} | phy_cores=${2}
+| | frame_size=${1518} | phy_cores=${2}
| tc06-1518B-4c-ethip6lispip4-ip6base-ndrpdr
| | [Tags] | 1518B | 4C
-| | framesize=${1518} | phy_cores=${4}
+| | frame_size=${1518} | phy_cores=${4}
| tc07-9000B-1c-ethip6lispip4-ip6base-ndrpdr
| | [Tags] | 9000B | 1C
-| | framesize=${9000} | phy_cores=${1}
+| | frame_size=${9000} | phy_cores=${1}
| tc08-9000B-2c-ethip6lispip4-ip6base-ndrpdr
| | [Tags] | 9000B | 2C
-| | framesize=${9000} | phy_cores=${2}
+| | frame_size=${9000} | phy_cores=${2}
| tc09-9000B-4c-ethip6lispip4-ip6base-ndrpdr
| | [Tags] | 9000B | 4C
-| | framesize=${9000} | phy_cores=${4}
+| | frame_size=${9000} | phy_cores=${4}
| tc10-IMIX-1c-ethip6lispip4-ip6base-ndrpdr
| | [Tags] | IMIX | 1C
-| | framesize=IMIX_v4_1 | phy_cores=${1}
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
| tc11-IMIX-2c-ethip6lispip4-ip6base-ndrpdr
| | [Tags] | IMIX | 2C
-| | framesize=IMIX_v4_1 | phy_cores=${2}
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
| tc12-IMIX-4c-ethip6lispip4-ip6base-ndrpdr
| | [Tags] | IMIX | 4C
-| | framesize=IMIX_v4_1 | phy_cores=${4}
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip6-ip6base-ndrpdr.robot b/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip6-ip6base-ndrpdr.robot
index 8dfa4e4869..97aa15b255 100644
--- a/tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip6-ip6base-ndrpdr.robot
+++ b/tests/vpp/perf/ip6_tunnels/10ge2p1x710-ethip6lispip6-ip6base-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
+# Copyright (c) 2019 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
@@ -17,16 +17,15 @@
| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X520-DA2 | IP6FWD | ENCAP | LISP | IP6UNRLAY | IP6OVRLAY
+| ... | NIC_Intel-X710 | IP6FWD | ENCAP | LISP | IP6UNRLAY | IP6OVRLAY
| ...
| Suite Setup | Set up 3-node performance topology with DUT's NIC model
-| ... | L3 | Intel-X520-DA2
+| ... | L3 | ${nic_name}
| Suite Teardown | Tear down 3-node performance topology
| ...
| Test Setup | Set up performance test
| ...
-| Test Teardown | Tear down performance discovery test | ${min_rate}pps
-| ... | ${framesize} | ${traffic_profile}
+| Test Teardown | Tear down performance test
| ...
| Test Template | Local Template
| ...
@@ -38,19 +37,17 @@
| ... | Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.\
| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
| ... | routing and static routes. LISPoIPv6 tunnel is configured between\
-| ... | DUT1 and DUT2. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic\
-| ... | by Intel.\
+| ... | DUT1 and DUT2. DUT1 and DUT2 tested with ${nic_name}.\
| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\
+| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
| ... | of packets transmitted. NDR and PDR are discovered for different\
| ... | Ethernet L2 frame sizes using MLRsearch library.\
| ... | *[Ref] Applicable standard specifications:* RFC6830.
*** Variables ***
-# X520-DA2 bandwidth limit
-| ${s_limit}= | ${10000000000}
-# LISP overhead.
+| ${nic_name}= | Intel-X710
+# LISP overhead
| ${overhead}= | 8
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253
@@ -64,20 +61,18 @@
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
| | ...
| | ... | *Arguments:*
-| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | - frame_size - Frame size in Bytes as integer or string (IMIX_v4_1).
| | ... | Type: integer, string
| | ... | - phy_cores - Number of physical cores. Type: integer
| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
| | ...
-| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
| | ...
-| | Set Test Variable | ${framesize}
-| | Set Test Variable | ${min_rate} | ${10000}
+| | Set Test Variable | \${frame_size}
| | ...
| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
| | And Add PCI devices to all DUTs
-| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
-| | ... | ${s_limit} | ${framesize} | overhead=${overhead}
+| | Set Max Rate And Jumbo And Handle Multi Seg
| | And Apply startup configuration on all VPP DUTs
| | When Initialize LISP IPv6 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
@@ -88,53 +83,52 @@
| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency}
| | Then Find NDR and PDR intervals using optimized search
-| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate}
*** Test Cases ***
| tc01-78B-1c-ethip6lispip6-ip6base-ndrpdr
| | [Tags] | 78B | 1C
-| | framesize=${78} | phy_cores=${1}
+| | frame_size=${78} | phy_cores=${1}
| tc02-78B-2c-ethip6lispip6-ip6base-ndrpdr
| | [Tags] | 78B | 2C
-| | framesize=${78} | phy_cores=${2}
+| | frame_size=${78} | phy_cores=${2}
| tc03-78B-4c-ethip6lispip6-ip6base-ndrpdr
| | [Tags] | 78B | 4C
-| | framesize=${78} | phy_cores=${4}
+| | frame_size=${78} | phy_cores=${4}
| tc04-1518B-1c-ethip6lispip6-ip6base-ndrpdr
| | [Tags] | 1518B | 1C
-| | framesize=${1518} | phy_cores=${1}
+| | frame_size=${1518} | phy_cores=${1}
| tc05-1518B-2c-ethip6lispip6-ip6base-ndrpdr
| | [Tags] | 1518B | 2C
-| | framesize=${1518} | phy_cores=${2}
+| | frame_size=${1518} | phy_cores=${2}
| tc06-1518B-4c-ethip6lispip6-ip6base-ndrpdr
| | [Tags] | 1518B | 4C
-| | framesize=${1518} | phy_cores=${4}
+| | frame_size=${1518} | phy_cores=${4}
| tc07-9000B-1c-ethip6lispip6-ip6base-ndrpdr
| | [Tags] | 9000B | 1C
-| | framesize=${9000} | phy_cores=${1}
+| | frame_size=${9000} | phy_cores=${1}
| tc08-9000B-2c-ethip6lispip6-ip6base-ndrpdr
| | [Tags] | 9000B | 2C
-| | framesize=${9000} | phy_cores=${2}
+| | frame_size=${9000} | phy_cores=${2}
| tc09-9000B-4c-ethip6lispip6-ip6base-ndrpdr
| | [Tags] | 9000B | 4C
-| | framesize=${9000} | phy_cores=${4}
+| | frame_size=${9000} | phy_cores=${4}
| tc10-IMIX-1c-ethip6lispip6-ip6base-ndrpdr
| | [Tags] | IMIX | 1C
-| | framesize=IMIX_v4_1 | phy_cores=${1}
+| | frame_size=IMIX_v4_1 | phy_cores=${1}
| tc11-IMIX-2c-ethip6lispip6-ip6base-ndrpdr
| | [Tags] | IMIX | 2C
-| | framesize=IMIX_v4_1 | phy_cores=${2}
+| | frame_size=IMIX_v4_1 | phy_cores=${2}
| tc12-IMIX-4c-ethip6lispip6-ip6base-ndrpdr
| | [Tags] | IMIX | 4C
-| | framesize=IMIX_v4_1 | phy_cores=${4}
+| | frame_size=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/ip6_tunnels/regenerate_testcases.py b/tests/vpp/perf/ip6_tunnels/regenerate_testcases.py
index d98546b14d..5e32e97fce 100755
--- a/tests/vpp/perf/ip6_tunnels/regenerate_testcases.py
+++ b/tests/vpp/perf/ip6_tunnels/regenerate_testcases.py
@@ -1,6 +1,6 @@
#!/usr/bin/env python
-# Copyright (c) 2018 Cisco and/or its affiliates.
+# Copyright (c) 2019 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at: