diff options
Diffstat (limited to 'tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-mrr.robot')
-rw-r--r-- | tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-mrr.robot | 139 |
1 files changed, 0 insertions, 139 deletions
diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-mrr.robot deleted file mode 100644 index f06f21531e..0000000000 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-mrr.robot +++ /dev/null @@ -1,139 +0,0 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance/performance_setup.robot -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR -| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | FEATURE | MACIP | ACL_STATELESS -| ... | IACL | ACL1 | 10k_FLOWS -| ... -| Suite Setup | Run Keywords -| ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | Intel-X520-DA2 -| ... | AND | Set up performance test suite with ACL -| ... -| Suite Teardown | Tear down 3-node performance topology -| ... -| Test Setup | Set up performance test -| ... -| Test Teardown | Tear down mrr test with MACIP ACL -| ... -| Test Template | Local Template -| ... -| Documentation | *Raw results L2BD test cases with ACL* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by\ -| ... | Intel. -| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic -| ... | at line rate and reports total received/sent packets over trial period. -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -# X520-DA2 bandwidth limit -| ${s_limit}= | ${10000000000} - -# ACL test setup -| ${acl_action}= | permit -| ${no_hit_aces_number}= | 1 -| ${flows_per_dir}= | 10k - -# starting points for non-hitting ACLs -| ${src_ip_start}= | 30.30.30.1 -| ${ip_step}= | ${1} -| ${src_mac_start}= | 01:02:03:04:05:06 -| ${src_mac_step}= | ${1000} -| ${src_mac_mask}= | 00:00:00:00:00:00 -| ${tg_stream1_mac}= | ca:fe:00:00:00:00 -| ${tg_stream2_mac}= | fa:ce:00:00:00:00 -| ${tg_mac_mask}= | ff:ff:ff:ff:c0:00 -| ${tg_stream1_subnet}= | 10.0.0.0/18 -| ${tg_stream2_subnet}= | 20.0.0.0/18 - -# traffic profile -| ${traffic_profile}= | trex-sl-3n-ethip4-macsrc10kip4src10k - -*** Keywords *** -| Local Template -| | [Documentation] | FIXME. -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} -| | ... -| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} -| | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} -| | And Apply startup configuration on all VPP DUTs -| | When Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology -| | Then Traffic should pass with maximum rate -| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} - -*** Test Cases *** -| tc01-64B-1c-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-mrr -| | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} - -| tc02-64B-2c-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-mrr -| | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} - -| tc03-64B-4c-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-mrr -| | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} - -| tc04-1518B-1c-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-mrr -| | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} - -| tc05-1518B-2c-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-mrr -| | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} - -| tc06-1518B-4c-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-mrr -| | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} - -| tc07-9000B-1c-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-mrr -| | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} - -| tc08-9000B-2c-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-mrr -| | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} - -| tc09-9000B-4c-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-mrr -| | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} - -| tc10-IMIX-1c-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-mrr -| | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} - -| tc11-IMIX-2c-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-mrr -| | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} - -| tc12-IMIX-4c-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-mrr -| | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} |