1 files changed, 0 insertions, 139 deletions
diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-mrr.robot
deleted file mode 100644
index ece0ecd428..0000000000
--- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-mrr.robot
+++ /dev/null
@@ -1,139 +0,0 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
-| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | FEATURE | MACIP | ACL_STATELESS
-| ... | IACL | ACL50 | 100_FLOWS
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 3-node performance topology with DUT's NIC model | L2
-| ... | Intel-X520-DA2
-| ... | AND | Set up performance test suite with ACL
-| ...
-| Suite Teardown | Tear down 3-node performance topology
-| ...
-| Test Setup | Set up performance test
-| ...
-| Test Teardown | Tear down mrr test with MACIP ACL
-| ...
-| Test Template | Local Template
-| ...
-| Documentation | *Raw results L2BD test cases with ACL*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
-| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
-| ... | Required MACIP ACL rules are applied to input paths of both DUT1\
-| ... | interfaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by\
-| ... | Intel.
-| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
-| ... | at line rate and reports total received/sent packets over trial period.
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
-| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\
-| ... | and static payload. MAC addresses are matching MAC addresses of the TG\
-| ... | node interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
-
-*** Variables ***
-# X520-DA2 bandwidth limit
-| ${s_limit}= | ${10000000000}
-
-# ACL test setup
-| ${acl_action}= | permit
-| ${no_hit_aces_number}= | 50
-| ${flows_per_dir}= | 100
-
-# starting points for non-hitting ACLs
-| ${src_ip_start}= | 30.30.30.1
-| ${ip_step}= | ${1}
-| ${src_mac_start}= | 01:02:03:04:05:06
-| ${src_mac_step}= | ${1000}
-| ${src_mac_mask}= | 00:00:00:00:00:00
-| ${tg_stream1_mac}= | ca:fe:00:00:00:00
-| ${tg_stream2_mac}= | fa:ce:00:00:00:00
-| ${tg_mac_mask}= | ff:ff:ff:ff:ff:80
-| ${tg_stream1_subnet}= | 10.0.0.0/24
-| ${tg_stream2_subnet}= | 20.0.0.0/24
-
-# traffic profile
-| ${traffic_profile}= | trex-sl-3n-ethip4-macsrc100ip4src100
-
-*** Keywords ***
-| Local Template
-| | [Documentation] | FIXME.
-| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
-| | ... | ${s_limit} | ${framesize}
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology
-| | Then Traffic should pass with maximum rate
-| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
-
-*** Test Cases ***
-| tc01-64B-1c-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-mrr
-| | [Tags] | 64B | 1C
-| | framesize=${64} | phy_cores=${1}
-
-| tc02-64B-2c-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-mrr
-| | [Tags] | 64B | 2C
-| | framesize=${64} | phy_cores=${2}
-
-| tc03-64B-4c-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-mrr
-| | [Tags] | 64B | 4C
-| | framesize=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-mrr
-| | [Tags] | 1518B | 1C
-| | framesize=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-mrr
-| | [Tags] | 1518B | 2C
-| | framesize=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-mrr
-| | [Tags] | 1518B | 4C
-| | framesize=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-mrr
-| | [Tags] | 9000B | 1C
-| | framesize=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-mrr
-| | [Tags] | 9000B | 2C
-| | framesize=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-mrr
-| | [Tags] | 9000B | 4C
-| | framesize=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-mrr
-| | [Tags] | IMIX | 1C
-| | framesize=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-mrr
-| | [Tags] | IMIX | 2C
-| | framesize=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-mrr
-| | [Tags] | IMIX | 4C
-| | framesize=IMIX_v4_1 | phy_cores=${4}