diff options
Diffstat (limited to 'tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot')
| -rw-r--r-- | tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot | 65 |
1 files changed, 28 insertions, 37 deletions
diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot index 2a061bb3e9..a923984e0c 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2018 Cisco and/or its affiliates. +# Copyright (c) 2019 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -16,19 +16,16 @@ | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL -| ... | IACL | ACL50 | 10k_FLOWS +| ... | IACL | ACL50 | 10K_FLOWS | ... | Suite Setup | Run Keywords | ... | Set up 3-node performance topology with DUT's NIC model | L2 -| ... | Intel-X710 +| ... | ${nic_name} | ... | AND | Set up performance test suite with ACL -| ... | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test -| ... -| Test Teardown | Tear down performance discovery test | ${min_rate}pps -| ... | ${framesize} | ${traffic_profile} +| Test Teardown | Tear down performance test | ... | Test Template | Local Template | ... @@ -40,12 +37,12 @@ | ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ | ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ | ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with 2p10GE NIC X710 by Intel.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using MLRsearch library. +| ... | DUT1 and DUT2 are tested with ${nic_name}.\ +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ | ... | Test packets are generated by TG on\ | ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ | ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ @@ -55,15 +52,13 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -# X710-DA2 bandwidth limit -| ${s_limit}= | ${10000000000} - +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} # ACL test setup | ${acl_action}= | permit+reflect | ${acl_apply_type}= | input | ${no_hit_aces_number}= | 50 | ${flows_per_dir}= | 10k - # starting points for non-hitting ACLs | ${src_ip_start}= | 30.30.30.1 | ${dst_ip_start}= | 40.40.40.1 @@ -73,7 +68,6 @@ | ${port_step}= | ${1} | ${trex_stream1_subnet}= | 10.10.10.0/24 | ${trex_stream2_subnet}= | 20.20.20.0/24 - # Traffic profile: | ${traffic_profile}= | trex-sl-3n-ethip4udp-10u1000p-conc @@ -85,70 +79,67 @@ | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ | | ... | | ... | *Arguments:* -| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). | | ... | Type: integer, string | | ... | - phy_cores - Number of physical cores. Type: integer | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} | | ... -| | Set Test Variable | ${framesize} -| | Set Test Variable | ${min_rate} | ${10000} +| | Set Test Variable | \${frame_size} | | ... | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg -| | ... | ${s_limit} | ${framesize} +| | Set Max Rate And Jumbo And Handle Multi Seg | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology | | Then Find NDR and PDR intervals using optimized search -| | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate} *** Test Cases *** | tc01-64B-1c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr | | [Tags] | 64B | 1C -| | framesize=${64} | phy_cores=${1} +| | frame_size=${64} | phy_cores=${1} | tc02-64B-2c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr | | [Tags] | 64B | 2C -| | framesize=${64} | phy_cores=${2} +| | frame_size=${64} | phy_cores=${2} | tc03-64B-4c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr | | [Tags] | 64B | 4C -| | framesize=${64} | phy_cores=${4} +| | frame_size=${64} | phy_cores=${4} | tc04-1518B-1c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr | | [Tags] | 1518B | 1C -| | framesize=${1518} | phy_cores=${1} +| | frame_size=${1518} | phy_cores=${1} | tc05-1518B-2c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr | | [Tags] | 1518B | 2C -| | framesize=${1518} | phy_cores=${2} +| | frame_size=${1518} | phy_cores=${2} | tc06-1518B-4c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr | | [Tags] | 1518B | 4C -| | framesize=${1518} | phy_cores=${4} +| | frame_size=${1518} | phy_cores=${4} | tc07-9000B-1c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr | | [Tags] | 9000B | 1C -| | framesize=${9000} | phy_cores=${1} +| | frame_size=${9000} | phy_cores=${1} | tc08-9000B-2c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr | | [Tags] | 9000B | 2C -| | framesize=${9000} | phy_cores=${2} +| | frame_size=${9000} | phy_cores=${2} | tc09-9000B-4c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr | | [Tags] | 9000B | 4C -| | framesize=${9000} | phy_cores=${4} +| | frame_size=${9000} | phy_cores=${4} | tc10-IMIX-1c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr | | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | phy_cores=${1} +| | frame_size=IMIX_v4_1 | phy_cores=${1} | tc11-IMIX-2c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr | | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | phy_cores=${2} +| | frame_size=IMIX_v4_1 | phy_cores=${2} | tc12-IMIX-4c-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr | | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | phy_cores=${4} +| | frame_size=IMIX_v4_1 | phy_cores=${4} |