aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/perf/l2/25ge2p1xxv710-avf-eth-l2xcbase-mrr.robot
diff options
context:
space:
mode:
Diffstat (limited to 'tests/vpp/perf/l2/25ge2p1xxv710-avf-eth-l2xcbase-mrr.robot')
-rw-r--r--tests/vpp/perf/l2/25ge2p1xxv710-avf-eth-l2xcbase-mrr.robot119
1 files changed, 0 insertions, 119 deletions
diff --git a/tests/vpp/perf/l2/25ge2p1xxv710-avf-eth-l2xcbase-mrr.robot b/tests/vpp/perf/l2/25ge2p1xxv710-avf-eth-l2xcbase-mrr.robot
deleted file mode 100644
index 3b8fea9fcd..0000000000
--- a/tests/vpp/perf/l2/25ge2p1xxv710-avf-eth-l2xcbase-mrr.robot
+++ /dev/null
@@ -1,119 +0,0 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
-| ... | NIC_Intel-XXV710 | ETH | L2XCFWD | BASE | L2XCBASE | DRV_AVF
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up SRIOV 3-node performance topology with DUT's NIC model
-| ... | L2 | Intel-XXV710 | AVF
-| ... | AND | Set up performance test suite with AVF driver
-| ...
-| Suite Teardown | Tear down 3-node performance topology
-| ...
-| Test Setup | Set up performance test
-| ...
-| Test Teardown | Tear down performance mrr test
-| ...
-| Test Template | Local template
-| ...
-| Documentation | *Raw results L2XC test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross-connect.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-\
-| ... | connect. DUT1 and DUT2 tested with 2p25GE NIC XXV710 by Intel with VF\
-| ... | enabled.
-| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\
-| ... | at line rate and reports total received/sent packets over trial period.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 254 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-
-*** Variables ***
-# XXV710-DA2 bandwidth limit ~50Gbps/2=25Gbps
-| ${s_25G}= | ${25000000000}
-# XXV710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps
-| ${s_18.75Mpps}= | ${18750000}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
-
-*** Keywords ***
-| Local template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC config with ${phy_cores} phy
-| | ... | core(s).
-| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\
-| | ... | trial throughput test.
-| | ...
-| | ... | *Arguments:*
-| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add DPDK no PCI to all DUTs
-| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo
-| | ... | ${s_25G} | ${framesize} | pps_limit=${s_18.75Mpps}
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize AVF interfaces
-| | And Initialize L2 Xconnect In 3-node Circular Topology
-| | Then Traffic should pass with maximum rate
-| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
-
-*** Test Cases ***
-| tc01-64B-1c-avf-eth-l2xcbase-mrr
-| | [Tags] | 64B | 1C
-| | framesize=${64} | phy_cores=${1}
-
-| tc02-64B-2c-avf-eth-l2xcbase-mrr
-| | [Tags] | 64B | 2C
-| | framesize=${64} | phy_cores=${2}
-
-| tc03-64B-4c-avf-eth-l2xcbase-mrr
-| | [Tags] | 64B | 4C
-| | framesize=${64} | phy_cores=${4}
-
-| tc04-1518B-1c-avf-eth-l2xcbase-mrr
-| | [Tags] | 1518B | 1C
-| | framesize=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-avf-eth-l2xcbase-mrr
-| | [Tags] | 1518B | 2C
-| | framesize=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-avf-eth-l2xcbase-mrr
-| | [Tags] | 1518B | 4C
-| | framesize=${1518} | phy_cores=${4}
-
-| tc10-IMIX-1c-avf-eth-l2xcbase-mrr
-| | [Tags] | IMIX | 1C
-| | framesize=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-avf-eth-l2xcbase-mrr
-| | [Tags] | IMIX | 2C
-| | framesize=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-avf-eth-l2xcbase-mrr
-| | [Tags] | IMIX | 4C
-| | framesize=IMIX_v4_1 | phy_cores=${4}