diff options
Diffstat (limited to 'tests/vpp/perf/l2')
67 files changed, 1915 insertions, 1490 deletions
diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot index 5db54b65b7..6aecbb1e80 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot @@ -27,27 +27,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC with 802.1ad test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 xconnect. -| ... | 802.1ad tagging is applied on link between DUT1 and DUT2 with inner 4B +| Documentation | **RFC2544: Pkt throughput L2XC with 802.1ad test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 xconnect. \ +| ... | 802.1ad tagging is applied on link between DUT1 and DUT2 with inner 4B \ | ... | vlan tag (id=100) and outer 4B vlan tag (id=200). -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | static payload. MAC addresses are matching MAC addresses of the TG +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | cross-connect. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 253 flows per flow-group) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG. \ | ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -71,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config. +| | ... | - **[Cfg]** DUT runs L2XC forwarding config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot index 780c82d273..cbde673ec1 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot @@ -26,27 +26,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. IEEE\ -| ... | 802.1Q tagging is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge\ -| ... | domain and MAC learning enabled. DUT1 and DUT2 are tested\ +| Documentation | **RFC2544: Pkt throughput L2BD with IEEE 802.1Q test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. \ +| ... | IEEE 802.1Q tagging is applied on link between DUT1 and DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | bridge-\ +| ... | domain and MAC learning enabled. DUT1 and DUT2 are tested \ | ... | with ${nic_name}. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are\ -| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\ -| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are \ +| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 \ +| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -70,9 +76,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD config with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD config with VLAN and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot index 9c2f0b08af..ac8ea43997 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC with IEEE 802.1Q test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. IEEE\ +| Documentation | **RFC2544: Pkt throughput L2XC with IEEE 802.1Q test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. IEEE \ | ... | 802.1Q tagging is applied on link between DUT1 and DUT2. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-\ -| ... | connect. DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are\ -| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\ -| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | cross-connect. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are \ +| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 \ +| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -67,9 +72,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2XC config with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2XC config with VLAN and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot index 8c70fc1e1d..e80d3cdc78 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot index 93dcad3af5..a259c75522 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot index 108516303f..3ef84a7063 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot index 737f76ba6f..95c00c5acc 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot index 817b55e750..f8f6dfbb27 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot index 5be6f99956..2d30830a10 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot index 2be2a617d5..557821d924 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot index 8faeaa292a..3b6f09a76d 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot index a045ff276b..675cbf134d 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy +| | ... | - **[Cfg]** DUT runs L2BD config with ACLs with ${phy_cores} phy \ | | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot index 9a426c3662..6a1c65f7bb 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot index 003290e31b..5fb3469dc7 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot index a2dc8cdef6..c2dae43adf 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy +| | ... | - **[Cfg]** DUT runs L2BD config with ACLs with ${phy_cores} phy \ | | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot index 60977d8a04..01978a1b41 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot index 90c3de6df5..b7c1939df6 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot index 067bfe6e1c..cfaa0063f7 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy +| | ... | - **[Cfg]** DUT runs L2BD config with ACLs with ${phy_cores} phy \ | | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot index 63b3ffb132..bd81d25007 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching \ +| ... | of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot index 30f536d576..28de9e4354 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot index 3882157f02..64ae6b1df4 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy +| | ... | - **[Cfg]** DUT runs L2BD config with ACLs with ${phy_cores} phy \ | | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot index 64fc2e38ed..8f9c364698 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdr.robot @@ -27,28 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by\ -| ... | Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required MACIP ACL rules are applied to input paths of both DUT1 \ +| ... | addresses of the TG node interfaces. DUT1 and DUT2 are tested with \ +| ... | 2p10GE NIC X520 Niantic by Intel. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -82,9 +88,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot index 837d8038c7..6830f3556f 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdr.robot @@ -27,28 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by\ -| ... | Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required MACIP ACL rules are applied to input paths of both DUT1 \ +| ... | addresses of the TG node interfaces. DUT1 and DUT2 are tested with \ +| ... | 2p10GE NIC X520 Niantic by Intel. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -82,9 +88,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot index 02e04333cb..4ebe9e4a15 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdr.robot @@ -27,28 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by\ -| ... | Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required MACIP ACL rules are applied to input paths of both DUT1 \ +| ... | addresses of the TG node interfaces. DUT1 and DUT2 are tested with \ +| ... | 2p10GE NIC X520 Niantic by Intel. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -82,9 +88,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot index f840b2fe76..8a951d1a9a 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdr.robot @@ -27,27 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. Required MACIP ACL rules are applied to input paths of both \ +| ... | DUT1 addresses of the TG node interfaces. DUT1 and DUT2 are tested \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot index 759064db91..35058db983 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdr.robot @@ -27,27 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. Required MACIP ACL rules are applied to input paths of both \ +| ... | DUT1 addresses of the TG node interfaces. DUT1 and DUT2 are tested \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot index 5ff1238aef..b167cd8684 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdr.robot @@ -27,27 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. Required MACIP ACL rules are applied to input paths of both \ +| ... | DUT1 addresses of the TG node interfaces. DUT1 and DUT2 are tested \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot index 0b7d0280f7..a6e7aa7454 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdr.robot @@ -27,27 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. Required MACIP ACL rules are applied to input paths of both \ +| ... | DUT1 addresses of the TG node interfaces. DUT1 and DUT2 are tested \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot index 42e18e03a0..04ffc75b77 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdr.robot @@ -27,27 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. Required MACIP ACL rules are applied to input paths of both \ +| ... | DUT1 addresses of the TG node interfaces. DUT1 and DUT2 are tested \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot index 98305442bc..0c64674e32 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot @@ -27,27 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge-\ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. Required MACIP ACL rules are applied to input paths of both \ +| ... | DUT1 addresses of the TG node interfaces. DUT1 and DUT2 are tested \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -81,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot index 9fec554309..a425bb61cb 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot @@ -26,24 +26,30 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\ -| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\ +| Documentation | **RFC2544: Pkt throughput L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | bridge-domain and MAC learning enabled. DUT1 and DUT2 are tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -62,9 +68,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD switching config and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD switching config and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot index 8d7b823d22..fce37e5a59 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot index cbacd52de4..fe9434ece8 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot index da5710eaa1..108e375a0c 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot index 5f6d151fb1..7f9c73d38c 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot index 1d0b5f03ae..406377f139 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot index 7991be1484..8c576f25b9 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot index 72705d52d3..5adca7053c 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot index 2fa9c79b92..d7b05da216 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching \ +| ... | of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] | FIXME. -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot index d3af3ae831..e0d2886966 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot index 9ee7169039..beb82978d8 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot index aade203d13..a4d169ab56 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 \ +| ... | intefaces. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot index e68ed5ff26..aedb96a8b2 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot index a4cf1811b0..72a7b16df0 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot index 07112f7547..bd7c6e36cc 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot index 6083b3556d..71a21d17dd 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot index b269236abc..b577a8acec 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot index 10cebc86fb..045b1b39b6 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot index 8563a436c7..fe88c5f4ce 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot @@ -27,27 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 and DUT2 are tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. DUT2 is configured with L2 cross-\ +| ... | connects. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +87,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot index ba8bc25639..e43e6892f1 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot @@ -27,28 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput for L2BD test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\ -| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 50k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload.\ +| Documentation | **RFC2544: Pkt throughput for L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | bridge-domain and MAC learning enabled. DUT1 and DUT2 are tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 50k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. \ | ... | MAC addresses ranges are incremented as follows: | ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, | ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, | ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, | ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -67,9 +73,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [CFG] Each DUT runs L2BD switching config and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD switching config and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot index a3dbe03979..d7df02a0fa 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot @@ -27,28 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput for L2BD test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\ -| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 5k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload.\ +| Documentation | **RFC2544: Pkt throughput for L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | bridge-domain and MAC learning enabled. DUT1 and DUT2 are tested with \ +| ... | with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 5k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. \ | ... | MAC addresses ranges are incremented as follows: | ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, | ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, | ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, | ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -67,9 +73,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [CFG] Each DUT runs L2BD switching config and uses ${phy_cores}\ +| | ... | [CFG] Each DUT runs L2BD switching config and uses ${phy_cores} \ | | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot index 875c15ed7c..25af80e97d 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot @@ -27,28 +27,34 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput for L2BD test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\ -| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 500k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload.\ +| Documentation | **RFC2544: Pkt throughput for L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | bridge-\ +| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 500k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. \ | ... | MAC addresses ranges are incremented as follows: | ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, | ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, | ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, | ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -67,9 +73,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2BD switching config and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2BD switching config and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2patch-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2patch-ndrpdr.robot index 93a8158e03..8d42937058 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2patch-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2patch-ndrpdr.robot @@ -26,24 +26,29 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2patch test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 patch. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 patch\ -| ... | DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header,IPv4 header with static payload.\ +| Documentation | **RFC2544: Pkt throughput L2patch test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 patch. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | patch DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all \ +| ... | packets containing Ethernet header, IPv4 header with static payload \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -62,9 +67,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2 patch config with ${phy_cores} phy +| | ... | - **[Cfg]** DUT runs L2 patch config with ${phy_cores} phy \ | | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-ndrpdr.robot index 0e2047cf2a..b67ad4ea4a 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-ndrpdr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-ndrpdr.robot @@ -26,24 +26,29 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- -| ... | connect. DUT1 and DUT2 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUTs. TG traffic profile -| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per -| ... | flow-group) with all packets containing Ethernet header, IPv4 header -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| Documentation | **RFC2544: Pkt throughput L2XC test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 \ +| ... | cross-connect. DUT1 and DUT2 are tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -62,9 +67,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with ${phy_cores} phy +| | ... | - **[Cfg]** DUT runs L2XC config with ${phy_cores} phy \ | | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot index c69dcfe59e..468f4eed29 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-ndrpdr.robot @@ -26,28 +26,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4 for L2 switching of IPv4.\ -| ... | IEEE 802.1Q tagging is applied on both links TG-DUT1 . -| ... | *[Cfg] DUT configuration:* DUT1 is configured with:\ -| ... | 2 VLAN subinterfaces (VID 100 and 200),\ -| ... | 1 L2 BD with the 2 VLAN subinterfaces,\ -| ... | DUT1 tested with ${nic_name} with VF enabled. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are\ -| ... | generated by TG on links to DUT1. TG traffic profile contains two L3\ -| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| Documentation | **RFC2544: Pkt throughput L2BD with IEEE 802.1Q test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Dot1q-IPv4 for L2 switching \ +| ... | of IPv4. IEEE 802.1Q tagging is applied on both links TG-DUT1. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with: \ +| ... | 2 VLAN subinterfaces (VID 100 and 200), \ +| ... | 1 L2 BD with the 2 VLAN subinterfaces. \ +| ... | DUT1 is tested with ${nic_name} with VF enabled. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are \ +| ... | generated by TG on links to DUT1. TG traffic profile contains two L3 \ +| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -66,9 +71,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD with VLAN with ${phy_cores} physical core(s) for\ -| | ... | worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs L2BD with VLAN with ${phy_cores} physical \ +| | ... | core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot index 98552f3de9..7456c0b799 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-dot1q-l2xcbase-ndrpdr.robot @@ -27,26 +27,31 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC with IEEE 802.1Q test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\ -| ... | single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. IEEE\ +| Documentation | **RFC2544: Pkt throughput L2XC with IEEE 802.1Q test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ +| ... | with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross connect. IEEE \ | ... | 802.1Q tagging is applied on link between DUT1-if2 and TG-if2. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross- connect.\ -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are\ -| ... | generated by TG on links to DUTs. TG traffic profile contains two L3\ -| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 cross-\ +| ... | connect. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are \ +| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 \ +| ... | flow-groups (flow-group per direction, 254 flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -65,9 +70,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] Each DUT runs L2XC config with VLAN and uses ${phy_cores}\ -| | ... | physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** Each DUT runs L2XC config with VLAN and uses \ +| | ... | ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot index e54e11c473..780903e995 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr.robot @@ -27,27 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 1-node circular topology +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 1-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +86,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy +| | ... | - **[Cfg]** DUT runs L2BD config with ACLs with ${phy_cores} phy \ | | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot index 4be7be3f32..a22e4e8494 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot @@ -27,27 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +86,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy +| | ... | - **[Cfg]** DUT runs L2BD config with ACLs with ${phy_cores} phy \ | | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot index 085b9de957..14fa1214f2 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr.robot @@ -27,27 +27,32 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled.\ -| ... | Required MACIP ACL rules are applied to input paths of both DUT1\ -| ... | interfaces. DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\ -| ... | and static payload. MAC addresses are matching MAC addresses of the TG\ -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. \ +| ... | Required MACIP ACL rules are applied to input paths of both DUT1 \ +| ... | addresses of the TG node interfaces. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with IP \ +| ... | protocol=61 and static payload. MAC addresses are matching MAC \ +| ... | addresses of the TG node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -81,9 +86,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot index 7636dd626e..d300bc4487 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-ndrpdr.robot @@ -26,24 +26,29 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2BD test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain\ -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \ +| ... | and MAC learning enabled. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC \ | ... | addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -62,9 +67,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config and uses ${phy_cores} physical\ -| | ... | core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs L2BD switching config and uses ${phy_cores} \ +| | ... | physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot index f1bd1b28ba..f6fc83ed21 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr.robot @@ -27,27 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +86,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot index a7a5327d97..33a82e92ba 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr.robot @@ -27,27 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Packet throughput L2BD test cases with ACL** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\ -| ... | and MAC learning enabled.\ -| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\ -| ... | DUT1 is tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\ -| ... | all packets containing Ethernet header, IPv4 header with UDP header and\ -| ... | static payload. MAC addresses are matching MAC addresses of the TG node\ -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-UDP for L2 switching of \ +| ... | IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge \ +| ... | domain and MAC learning enabled. \ +| ... | Required ACL rules are applied to input paths of both DUT1 intefaces. \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with \ +| ... | all packets containing Ethernet header, IPv4 header with UDP header \ +| ... | and static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so @@ -80,9 +86,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | - **[Cfg]** DUT runs IPv4 routing config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot index 5bc5a04487..6b12fc1a17 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale100kmaclrn-ndrpdr.robot @@ -27,28 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput for L2BD test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput for L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain\ -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 50k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \ +| ... | and MAC learning enabled. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 50k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. \ | ... | MAC addresses ranges are incremented as follows: | ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, | ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, | ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, | ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -67,9 +72,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config and uses ${phy_cores} physical\ -| | ... | core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs L2BD switching config and uses ${phy_cores} \ +| | ... | physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot index 591933baf4..8d19ecde87 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale10kmaclrn-ndrpdr.robot @@ -27,28 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput for L2BD test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput for L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain\ -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 5k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \ +| ... | and MAC learning enabled. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 5k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. \ | ... | MAC addresses ranges are incremented as follows: | ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, | ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, | ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, | ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -67,9 +72,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config and uses ${phy_cores} physical\ -| | ... | core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs L2BD switching config and uses ${phy_cores} \ +| | ... | physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot index 0c9d2a03ff..c8ed6a8cce 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2bdscale1mmaclrn-ndrpdr.robot @@ -27,28 +27,33 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput for L2BD test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ +| Documentation | **RFC2544: Pkt throughput for L2BD test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain\ -| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on links to DUT1. TG traffic profile\ -| ... | contains two L3 flow-groups (flow-group per direction, 500k flows per\ -| ... | flow-group) with all packets containing Ethernet header, IPv4 header\ -| ... | with IP protocol=61 and static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \ +| ... | and MAC learning enabled. DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on links to DUT1. TG traffic profile \ +| ... | contains two L3 flow-groups (flow-group per direction, 500k flows per \ +| ... | flow-group) with all packets containing Ethernet header, IPv4 header \ +| ... | with IP protocol=61 and static payload. \ | ... | MAC addresses ranges are incremented as follows: | ... | port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, | ... | port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, | ... | port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, | ... | port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -67,9 +72,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config and uses ${phy_cores} physical\ -| | ... | core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Cfg]** DUT runs L2BD switching config and uses ${phy_cores} \ +| | ... | physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2patch-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2patch-ndrpdr.robot index 35f94c8893..356eff5d15 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2patch-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2patch-ndrpdr.robot @@ -26,24 +26,29 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2patch test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput L2patch test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 patch. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 patch\ -| ... | DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header,IPv4 header with static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 patch. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 patch \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all \ +| ... | packets containing Ethernet header, IPv4 header with static payload \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -62,9 +67,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2 patch config with ${phy_cores} phy +| | ... | - **[Cfg]** DUT runs L2 patch config with ${phy_cores} phy \ | | ... | core(s). -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). diff --git a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2xcbase-ndrpdr.robot b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2xcbase-ndrpdr.robot index 8c55c56d1b..aa9e0458ee 100644 --- a/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2xcbase-ndrpdr.robot +++ b/tests/vpp/perf/l2/2n1l-10ge2p1x710-eth-l2xcbase-ndrpdr.robot @@ -26,24 +26,29 @@ | | Test Template | Local Template | -| Documentation | *RFC2544: Pkt throughput L2XC test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology +| Documentation | **RFC2544: Pkt throughput L2XC test cases** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \ | ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect. -| ... | DUT1 tested with ${nic_name}.\ -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ -| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ -| ... | of packets transmitted. NDR and PDR are discovered for different\ -| ... | Ethernet L2 frame sizes using MLRsearch library.\ -| ... | Test packets are generated by TG on\ -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ -| ... | (flow-group per direction, 254 flows per flow-group) with\ -| ... | all packets containing Ethernet header,IPv4 header with static payload.\ +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 \ +| ... | DUT1 is tested with ${nic_name}. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, 254 flows per flow-group) with all \ +| ... | packets containing Ethernet header, IPv4 header with static payload \ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC2544. *** Variables *** | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so @@ -62,9 +67,9 @@ *** Keywords *** | Local Template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC config.\ +| | ... | - **[Cfg]** DUT runs L2XC config. \ | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. | | | | ... | *Arguments:* | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). |