diff options
Diffstat (limited to 'tests/vpp/perf/nfv_density/dcr_memif')
8 files changed, 1072 insertions, 0 deletions
diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..8a8d863d46 --- /dev/null +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr.robot @@ -0,0 +1,142 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 10R2C +| ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 20DCR1T +| ... +| Suite Setup | Run Keywords +| ... | Set up 2-node performance topology with DUT's NIC model | L3 +| ... | ${nic_name} +| ... | AND | Set up performance test suite with MEMIF +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Run Keywords +| ... | Tear down performance test +| ... | AND | Tear down performance test with container +| ... +| Test Template | Local Template +| ... +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 10 chains +| ... | 20 docker container* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains +| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ +| ... | Container is connected to VPP via Memif interface. Container is running +| ... | same VPP version as running on DUT. Container is limited via cgroup to +| ... | use cores allocated from pool of isolated CPUs. There are no memory +| ... | contraints. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per +| ... | flow-group) with all packets containing Ethernet header, IPv4 header +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | addresses of the TG node interfaces. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${2} +| ${nf_dtc}= | ${0.5} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-10c2n +# Container +| ${container_engine}= | Docker +| ${container_chain_topology}= | chain_ip4 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | And Set up performance test with containers +| | ... | nf_chains=${10} | nf_nodes=${2} | auto_scale=${False} +| | And Initialize L2 Bridge Domain for multiple chains with memif pairs +| | ... | nf_chains=${10} | nf_nodes=${2} | auto_scale=${False} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-10ch-40mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..19b39d35a8 --- /dev/null +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr.robot @@ -0,0 +1,142 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R10C +| ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 20DCR1T +| ... +| Suite Setup | Run Keywords +| ... | Set up 2-node performance topology with DUT's NIC model | L3 +| ... | ${nic_name} +| ... | AND | Set up performance test suite with MEMIF +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Run Keywords +| ... | Tear down performance test +| ... | AND | Tear down performance test with container +| ... +| Test Template | Local Template +| ... +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 2 chains +| ... | 20 docker container* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains +| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ +| ... | Container is connected to VPP via Memif interface. Container is running +| ... | same VPP version as running on DUT. Container is limited via cgroup to +| ... | use cores allocated from pool of isolated CPUs. There are no memory +| ... | contraints. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per +| ... | flow-group) with all packets containing Ethernet header, IPv4 header +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | addresses of the TG node interfaces. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${2} +| ${nf_dtc}= | ${0.5} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c10n +# Container +| ${container_engine}= | Docker +| ${container_chain_topology}= | chain_ip4 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | And Set up performance test with containers +| | ... | nf_chains=${2} | nf_nodes=${10} | auto_scale=${False} +| | And Initialize L2 Bridge Domain for multiple chains with memif pairs +| | ... | nf_chains=${2} | nf_nodes=${10} | auto_scale=${False} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-2ch-40mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..64e624e1d8 --- /dev/null +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr.robot @@ -0,0 +1,126 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R6C +| ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 24DCR1T +| ... +| Suite Setup | Run Keywords +| ... | Set up 2-node performance topology with DUT's NIC model | L3 +| ... | ${nic_name} +| ... | AND | Set up performance test suite with MEMIF +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Run Keywords +| ... | Tear down performance test +| ... | AND | Tear down performance test with container +| ... +| Test Template | Local Template +| ... +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 4 chains +| ... | 24 docker container* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains +| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ +| ... | Container is connected to VPP via Memif interface. Container is running +| ... | same VPP version as running on DUT. Container is limited via cgroup to +| ... | use cores allocated from pool of isolated CPUs. There are no memory +| ... | contraints. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per +| ... | flow-group) with all packets containing Ethernet header, IPv4 header +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | addresses of the TG node interfaces. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${2} +| ${nf_dtc}= | ${0.5} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c6n +# Container +| ${container_engine}= | Docker +| ${container_chain_topology}= | chain_ip4 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | And Set up performance test with containers +| | ... | nf_chains=${4} | nf_nodes=${6} | auto_scale=${False} +| | And Initialize L2 Bridge Domain for multiple chains with memif pairs +| | ... | nf_chains=${4} | nf_nodes=${6} | auto_scale=${False} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc04-1518B-1c-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc07-9000B-1c-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc10-IMIX-1c-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-4ch-48mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..7ab0cb3cfe --- /dev/null +++ b/tests/vpp/perf/nfv_density/dcr_memif/chain/2n-10ge2p1x710-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr.robot @@ -0,0 +1,126 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 6R4C +| ... | NF_DENSITY | CHAIN | NF_VPPIP4 | 24DCR1T +| ... +| Suite Setup | Run Keywords +| ... | Set up 2-node performance topology with DUT's NIC model | L3 +| ... | ${nic_name} +| ... | AND | Set up performance test suite with MEMIF +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Run Keywords +| ... | Tear down performance test +| ... | AND | Tear down performance test with container +| ... +| Test Template | Local Template +| ... +| Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 6 chains +| ... | 24 docker container* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains +| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ +| ... | Container is connected to VPP via Memif interface. Container is running +| ... | same VPP version as running on DUT. Container is limited via cgroup to +| ... | use cores allocated from pool of isolated CPUs. There are no memory +| ... | contraints. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per +| ... | flow-group) with all packets containing Ethernet header, IPv4 header +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | addresses of the TG node interfaces. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${2} +| ${nf_dtc}= | ${0.5} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c4n +# Container +| ${container_engine}= | Docker +| ${container_chain_topology}= | chain_ip4 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | And Set up performance test with containers +| | ... | nf_chains=${6} | nf_nodes=${4} | auto_scale=${False} +| | And Initialize L2 Bridge Domain for multiple chains with memif pairs +| | ... | nf_chains=${6} | nf_nodes=${4} | auto_scale=${False} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc04-1518B-1c-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc07-9000B-1c-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc10-IMIX-1c-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-6ch-48mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..31c8a9da53 --- /dev/null +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr.robot @@ -0,0 +1,142 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 10R2C +| ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 20DCR1T +| ... +| Suite Setup | Run Keywords +| ... | Set up 2-node performance topology with DUT's NIC model | L3 +| ... | ${nic_name} +| ... | AND | Set up performance test suite with MEMIF +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Run Keywords +| ... | Tear down performance test +| ... | AND | Tear down performance test with container +| ... +| Test Template | Local Template +| ... +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 20 memif 10 +| ... | pipelines 20 docker containers* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains +| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ +| ... | Container is connected to VPP via Memif interface. Container is running +| ... | same VPP version as running on DUT. Container is limited via cgroup to +| ... | use cores allocated from pool of isolated CPUs. There are no memory +| ... | contraints. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per +| ... | flow-group) with all packets containing Ethernet header, IPv4 header +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | addresses of the TG node interfaces. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${2} +| ${nf_dtc}= | ${0.5} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-10c2n +# Container +| ${container_engine}= | Docker +| ${container_chain_topology}= | pipeline_ip4 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | And Set up performance test with containers +| | ... | nf_chains=${10} | nf_nodes=${2} | auto_scale=${False} +| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs +| | ... | nf_chains=${10} | nf_nodes=${2} | auto_scale=${False} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-10pl-20mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..c1dffbd2dc --- /dev/null +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr.robot @@ -0,0 +1,142 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 2R10C +| ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 20DCR1T +| ... +| Suite Setup | Run Keywords +| ... | Set up 2-node performance topology with DUT's NIC model | L3 +| ... | ${nic_name} +| ... | AND | Set up performance test suite with MEMIF +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Run Keywords +| ... | Tear down performance test +| ... | AND | Tear down performance test with container +| ... +| Test Template | Local Template +| ... +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 4 memif 2 +| ... | pipelines 20 docker containers* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains +| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ +| ... | Container is connected to VPP via Memif interface. Container is running +| ... | same VPP version as running on DUT. Container is limited via cgroup to +| ... | use cores allocated from pool of isolated CPUs. There are no memory +| ... | contraints. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per +| ... | flow-group) with all packets containing Ethernet header, IPv4 header +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | addresses of the TG node interfaces. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${2} +| ${nf_dtc}= | ${0.5} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-2c10n +# Container +| ${container_engine}= | Docker +| ${container_chain_topology}= | pipeline_ip4 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | And Set up performance test with containers +| | ... | nf_chains=${2} | nf_nodes=${10} | auto_scale=${False} +| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs +| | ... | nf_chains=${2} | nf_nodes=${10} | auto_scale=${False} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc03-64B-4c-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| tc04-1518B-1c-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc06-1518B-4c-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| tc07-9000B-1c-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc09-9000B-4c-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| tc10-IMIX-1c-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| tc12-IMIX-4c-eth-l2bd-2pl-4mif-20dcr1t-vppip4-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..83e6840045 --- /dev/null +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr.robot @@ -0,0 +1,126 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 4R6C +| ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 24DCR1T +| ... +| Suite Setup | Run Keywords +| ... | Set up 2-node performance topology with DUT's NIC model | L3 +| ... | ${nic_name} +| ... | AND | Set up performance test suite with MEMIF +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Run Keywords +| ... | Tear down performance test +| ... | AND | Tear down performance test with container +| ... +| Test Template | Local Template +| ... +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 8 memif 4 +| ... | pipelines 24 docker containers* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains +| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ +| ... | Container is connected to VPP via Memif interface. Container is running +| ... | same VPP version as running on DUT. Container is limited via cgroup to +| ... | use cores allocated from pool of isolated CPUs. There are no memory +| ... | contraints. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per +| ... | flow-group) with all packets containing Ethernet header, IPv4 header +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | addresses of the TG node interfaces. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${2} +| ${nf_dtc}= | ${0.5} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c6n +# Container +| ${container_engine}= | Docker +| ${container_chain_topology}= | pipeline_ip4 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | And Set up performance test with containers +| | ... | nf_chains=${4} | nf_nodes=${6} | auto_scale=${False} +| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs +| | ... | nf_chains=${4} | nf_nodes=${6} | auto_scale=${False} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc04-1518B-1c-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc07-9000B-1c-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc10-IMIX-1c-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-4pl-8mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} diff --git a/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot new file mode 100644 index 0000000000..752f6fd6d9 --- /dev/null +++ b/tests/vpp/perf/nfv_density/dcr_memif/pipeline/2n-10ge2p1x710-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr.robot @@ -0,0 +1,126 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 6R4C +| ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 24DCR1T +| ... +| Suite Setup | Run Keywords +| ... | Set up 2-node performance topology with DUT's NIC model | L3 +| ... | ${nic_name} +| ... | AND | Set up performance test suite with MEMIF +| Suite Teardown | Tear down 2-node performance topology +| ... +| Test Setup | Set up performance test +| Test Teardown | Run Keywords +| ... | Tear down performance test +| ... | AND | Tear down performance test with container +| ... +| Test Template | Local Template +| ... +| Documentation | **RFC2544: Pkt throughput L2BD test cases with 12 memif 6 +| ... | pipelines 24 docker containers* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with +| ... | single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain. +| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains +| ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\ +| ... | Container is connected to VPP via Memif interface. Container is running +| ... | same VPP version as running on DUT. Container is limited via cgroup to +| ... | use cores allocated from pool of isolated CPUs. There are no memory +| ... | contraints. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using MLRsearch library.\ +| ... | Test packets are generated by TG on links to DUTs. TG traffic profile +| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per +| ... | flow-group) with all packets containing Ethernet header, IPv4 header +| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC +| ... | addresses of the TG node interfaces. + +*** Variables *** +| ${nic_name}= | Intel-X710 +| ${overhead}= | ${0} +| ${nf_dtcr}= | ${2} +| ${nf_dtc}= | ${0.5} +# Traffic profile: +| ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c4n +# Container +| ${container_engine}= | Docker +| ${container_chain_topology}= | pipeline_ip4 + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ +| | ... +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | ... +| | Set Test Variable | \${frame_size} +| | ... +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | And Add PCI devices to all DUTs +| | Set Max Rate And Jumbo And Handle Multi Seg +| | And Apply startup configuration on all VPP DUTs +| | And Set up performance test with containers +| | ... | nf_chains=${6} | nf_nodes=${4} | auto_scale=${False} +| | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs +| | ... | nf_chains=${6} | nf_nodes=${4} | auto_scale=${False} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| tc01-64B-1c-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| tc02-64B-2c-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| tc04-1518B-1c-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| tc05-1518B-2c-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| tc07-9000B-1c-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| tc08-9000B-2c-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| tc10-IMIX-1c-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| tc11-IMIX-2c-eth-l2bd-6pl-12mif-24dcr1t-vppip4-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} |