aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-mrr.robot
diff options
context:
space:
mode:
Diffstat (limited to 'tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-mrr.robot')
-rw-r--r--tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-mrr.robot169
1 files changed, 0 insertions, 169 deletions
diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-mrr.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-mrr.robot
deleted file mode 100644
index 3de8e50bed..0000000000
--- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-mrr.robot
+++ /dev/null
@@ -1,169 +0,0 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
-| ... | NIC_Intel-X520-DA2 | SRv6 | IP6FWD | FEATURE | SRv6_PROXY
-| ... | SRv6_PROXY_MASQ | MEMIF | LXC
-| ...
-| Suite Setup | Run Keywords
-| ... | Set up 3-node performance topology with DUT's NIC model | L3
-| ... | Intel-X520-DA2
-| ... | AND | Set up performance test suite with MEMIF
-| ... | AND | Set up performance test suite with Masquerading SRv6 proxy
-| ...
-| Suite Teardown | Tear down 3-node performance topology
-| ...
-| Test Setup | Set up performance test
-| ...
-| Test Teardown | Run Keywords
-| ... | Tear down mrr test with SRv6 with encapsulation
-| ... | AND | Tear down performance test with container
-| ...
-| Test Template | Local template
-| ...
-| Documentation | *Raw results for Segment routing over IPv6 dataplane with\
-| ... | Masquerading SRv6 proxy test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-SRH-IPv6 on DUT1-DUT2, DUTn-LXC\
-| ... | and DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
-| ... | routing and static route, SR policy and steering policy for one\
-| ... | direction and one SR behaviour (function) - End.AM - for other\
-| ... | direction. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic\
-| ... | by Intel.
-| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\
-| ... | at line rate and reports total received/sent packets over trial period.\
-| ... | Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 253 flows per flow-group) with\
-| ... | all packets containing Ethernet header,IPv6 header with static payload.\
-| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
-| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\
-| ... | draft 3 and Segment Routing for Service Chaining - internet draft 01.
-
-*** Variables ***
-# X520-DA2 bandwidth limit
-| ${s_limit}= | ${10000000000}
-# SIDs
-| ${dut1_sid1}= | 2002:1::
-| ${dut1_sid2}= | 2003:2::
-| ${dut1_bsid}= | 2002:1::1
-| ${dut2_sid1}= | 2002:2::
-| ${dut2_sid2}= | 2003:1::
-| ${dut2_bsid}= | 2003:1::1
-| ${out_sid1_1}= | 2002:3::
-| ${out_sid1_2}= | 2002:4::
-| ${out_sid2_1}= | 2003:3::
-| ${out_sid2_2}= | 2003:4::
-| ${sid_prefix}= | ${64}
-# IP settings
-| ${tg_if1_ip6_subnet}= | 2001:1::
-| ${tg_if2_ip6_subnet}= | 2001:2::
-| ${dut1_if1_ip6}= | 2001:1::1
-| ${dut1_if2_ip6}= | 2001:3::1
-| ${dut1-memif-1-if1_ip6}= | 3001:1::1
-| ${dut1-memif-1-if2_ip6}= | 3001:1::2
-| ${dut1_nh}= | 4002::
-| ${dut2_if1_ip6}= | 2001:3::2
-| ${dut2_if2_ip6}= | 2001:2::1
-| ${dut2-memif-1-if1_ip6}= | 3002:1::1
-| ${dut2-memif-1-if2_ip6}= | 3002:1::2
-| ${dut2_nh}= | 4001::
-| ${prefix}= | ${64}
-# outer IPv6 header + SRH with 3 SIDs: 40+(8+3*16)B
-| ${srv6_overhead_3sids}= | ${96}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253
-# Container
-| ${container_engine}= | LXC
-| ${container_chain_topology}= | chain
-
-*** Keywords ***
-| Local template
-| | [Documentation]
-| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with ${phy_cores} phy
-| | ... | core(s).
-| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\
-| | ... | trial throughput test.
-| | ...
-| | ... | *Arguments:*
-| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
-| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
-| | ... | ${s_limit} | ${framesize} | overhead=${srv6_overhead_3sids}
-| | And Apply startup configuration on all VPP DUTs
-| | And Set up performance test with containers | nf_chains=${1} | nf_nodes=${1}
-| | When Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via 'masquerading' behaviour in 3-node circular topology
-| | Then Traffic should pass with maximum rate
-| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
-
-*** Test Cases ***
-| tc01-78B-1c-ethip6srhip6-ip6base-srv6proxy-masq-mrr
-| | [Tags] | 78B | 1C
-| | framesize=${78} | phy_cores=${1}
-
-| tc02-78B-2c-ethip6srhip6-ip6base-srv6proxy-masq-mrr
-| | [Tags] | 78B | 2C
-| | framesize=${78} | phy_cores=${2}
-
-| tc03-78B-4c-ethip6srhip6-ip6base-srv6proxy-masq-mrr
-| | [Tags] | 78B | 4C
-| | framesize=${78} | phy_cores=${4}
-
-| tc04-1518B-1c-ethip6srhip6-ip6base-srv6proxy-masq-mrr
-| | [Tags] | 1518B | 1C
-| | framesize=${1518} | phy_cores=${1}
-
-| tc05-1518B-2c-ethip6srhip6-ip6base-srv6proxy-masq-mrr
-| | [Tags] | 1518B | 2C
-| | framesize=${1518} | phy_cores=${2}
-
-| tc06-1518B-4c-ethip6srhip6-ip6base-srv6proxy-masq-mrr
-| | [Tags] | 1518B | 4C
-| | framesize=${1518} | phy_cores=${4}
-
-| tc07-9000B-1c-ethip6srhip6-ip6base-srv6proxy-masq-mrr
-| | [Tags] | 9000B | 1C
-| | framesize=${9000} | phy_cores=${1}
-
-| tc08-9000B-2c-ethip6srhip6-ip6base-srv6proxy-masq-mrr
-| | [Tags] | 9000B | 2C
-| | framesize=${9000} | phy_cores=${2}
-
-| tc09-9000B-4c-ethip6srhip6-ip6base-srv6proxy-masq-mrr
-| | [Tags] | 9000B | 4C
-| | framesize=${9000} | phy_cores=${4}
-
-| tc10-IMIX-1c-ethip6srhip6-ip6base-srv6proxy-masq-mrr
-| | [Tags] | IMIX | 1C
-| | framesize=IMIX_v4_1 | phy_cores=${1}
-
-| tc11-IMIX-2c-ethip6srhip6-ip6base-srv6proxy-masq-mrr
-| | [Tags] | IMIX | 2C
-| | framesize=IMIX_v4_1 | phy_cores=${2}
-
-| tc12-IMIX-4c-ethip6srhip6-ip6base-srv6proxy-masq-mrr
-| | [Tags] | IMIX | 4C
-| | framesize=IMIX_v4_1 | phy_cores=${4}